I have looked, googled for sometime now with no answer. I used philz kernel ages ago along with a leaked Samsung official jellybean, the firmware was from Korea I think. Anyways, the phone works 100% but I have not used it since upgrading to the note II. I'm going to sell the phone but would like to flash back and install the official UK firmware just so the new owner has no issues. Also when I reset the phone it's in another language, which might put some buyers off, obviously you can change the language to English but still. The reason im having trouble is because the baseband and build number do not match any other I can find on the internet, which makes me think I may have messed up when I flashed, although everything works fine.
My device info is -
Model number - GT-N7000
Android Version - 4.1.2
Baseband version - N7000XXLSO
Kernel version 3.0.31-1042183
[email protected] #3
SMP PREEMPT Sat Mar 23 18.25:14 KST 2013
Build number - JZO54K.N7000ZSLO2
All the info I found showed a different build number or baseband... so I'm lost. Hopefully someone can help.
Please be nice...
Thanks
I was wrong, the firmware was from Taiwan i think, anyways... I flashed PhilZ-cwm6-XXLRK-XEU-3.99-signed... that was a long time ago. Hope that helps.
I found this kernel, is this ok to flash? PhilZ-cwm6-ZSLO2-OZS-5.06.1-signed
Where can I find stock official UK firmware? I have not checked yet but will look... just did not want to get ahead of myself.
Thanks again for any help.
head over to sammobile.com and search for firmware for UK and flash it via pc odin after doing all the wipes. before flashing make sure counter is set to 0.
excellent, so what about my kernel? i'm sure I need to flash another safe kernel because I think my safe kernel was replaced when i installed the official rom?
sorry, so just odin then... not to worry about the kernel?
htc-me said:
sorry, so just odin then... not to worry about the kernel?
Click to expand...
Click to collapse
use the philz kernel you mentioned (.zip file), do the wipes, download the stock rom from sammobile.com and flash using pc odin.
Sorry dude, i've done this loads of times but as im selling it i'm feeling nervous...lol
flash this file PhilZ-cwm6-ZSLO2-OZS-5.06.1-signed?
thanks again..
Related
Tried to find information about this without luck.
I'm runing Roto's rom on my tab but is about to sell it and need to restore the original firmware and rom.
Is this possible? (didn't take any backup when I flashed)
I think the best way is to go to the samfirmware.com website and download & flash an original (jj3 in my case) rom following their guide, using odin?
I didn't try so, I'm running Overcome 1.1.3 myself, so I might want to revert back to stock also one day.
Maybe someone could comfirm or advice any correct way to flash back to stock?
Especially coming from ext4 back to rfs...
Might be worth a sticky :-!
Sent from my GT-P1000 using XDA App
dhanjel said:
Tried to find information about this without luck.
I'm runing Roto's rom on my tab but is about to sell it and need to restore the original firmware and rom.
Is this possible? (didn't take any backup when I flashed)
Click to expand...
Click to collapse
How does this belong in the Development section? Should be in General.!
You're right, wrong section. But I can't see any way to move it.
A little update, I've successfully flashed it with original firmware from samfirmware, but I can't find a version with the scandinavian languages.
So, how did you do it? Details.
I also flashed back to a stock rom yesterday (was running overcome)
XXJK5 as I couldn't flash JJ3, it appears to be impossible to flash a firmware with a hiddenfs.rfs partition?
Flashed xxjk5 with repartition on and it was ok after adding also the multi-csc, otherwhise it boots into recovery with an error about "unable to mount..." and "datadb not found...."
The only thing, there must be some problem with this multi-csc file,
the list of salescodes doesn't contain XEU (*#272*imei#), while this xxj5 rom I downloaded was XEU.
KIES tells me by the way "this version cannot be updated" and I find only 3 apps in samsung apps :-(
Sent from my GT-P1000 using XDA App
Magaboo: Pretty much as JohnBlade73 described.
But with the same problems, not the language I want and not upgradable in kies. :/
dhanjel said:
Magaboo: Pretty much as JohnBlade73 described.
But with the same problems, not the language I want and not upgradable in kies. :/
Click to expand...
Click to collapse
Do you mean the input language for swype/samsung keyboard?
Because if you can't select your locale for the os, you could just install morelocale 2 from the market.
JohnBlade73 said:
Do you mean the input language for swype/samsung keyboard?
Because if you can't select your locale for the os, you could just install morelocale 2 from the market.
Click to expand...
Click to collapse
Yeah the missing languages is one part of the problem, the other part is that kies just says "this device isn't upgradable"
i have the same problem
i will sale my tablet but the new owner will have a firmware how is updateing per kies - the fw from samsungware.com don´t work for me and kies
i have a euro tab and my backup´s are lost after a hdd crash
have any one a fw thats working with kies?
sorry for my bad english xD
lg
Hi!
I am from Norway and thinking about rooting my Galaxy tab. But having previously almost screwed up my android phone doing this I am having second thoughts.
Before I am doing any rooting I want to make sure that I can revert back to an unrooted tab. And then I will need to flash my original firmware with odin right? But I have not been able to find this version of my firmware. Can anyone help my find my firmware? Or can I copy the firmware from my tab somehow and copy it back?
My Tab:
Model: GT-P7510
Android Version: 3.2
Kernel: 2.6.36.3 [email protected] #1 SMP PREEMPT Wed Dec 7
Build number: HTJ85B P7510XWKL1 (Norwegian/Scandinavian)
I need the correct so i can get the correct input languages.
search for "check fus" program, it downloads the latest version of your tab
Apologies if this is the 23534th thread about this, had a search through and wasn't able to find a solution that I hadn't already tried.
Currently have Galaxy S with DarkyROM loaded (x2). Trying to break contract and send the phone back and need to reload the stock/factory ROM so I can send the phone off for "repair" and not get done for hacking my phone!
Have tried the Kies/Registry hacks to get Kies to do the hard work for me, but Kies just won't give me an "Update Firmware" version.
On the second phone I loaded a stock Froyo ROM via Odin which wasn't behaving properly - did a factory reset and pretty sure the phone is bricked.
Haven't been able to find a working download for a stock OPS/Optus ROM to try on the other phone.
Any suggestions?
Thanks in advance!
Model number - GT-I9000
Firmware version - 2.3.3
Baseband version - I9000XXJVO
Kernel version - 2.6.65.7-I9000XWJVH-CL184813
[email protected] #Dark_Core_2.4
Mon May 16 15:02:38 EEST 2011
Build number - DarkyROM JVH v10.1
what exactly is wrong with your phone? is the phone fully functioning and you just want to restore to stock for Optus?
stock Optus rom http://forum.xda-developers.com/showthread.php?t=1102881
spyder_pirate said:
what exactly is wrong with your phone? is the phone fully functioning and you just want to restore to stock for Optus?
stock Optus rom http://forum.xda-developers.com/showthread.php?t=1102881
Click to expand...
Click to collapse
YES! Thanks heaps!
As long as I don't screw up via Odin again this should get me to where I need to be!
I need some advice. My current situation is as follows:
Android Version: 4.0.3
Baseband version n7000XXLPT
Kernel version
3.0.15
[email protected] #3-3
SMP PREEMPT SUN MAY 27 22:49:18 SGT 2012
BUILD NUMBER
IML74KXXLPY
AND THE PHONE IS ROOTED.
I would like to be my phone back to stock. Just how to do I go about that? I am unable to install the LRG 4.0.4 ota or Kies.
I appreciate your help.
Humphster
humphster said:
I need some advice. My current situation is as follows:
Android Version: 4.0.3
Baseband version n7000XXLPT
Kernel version
3.0.15
[email protected] #3-3
SMP PREEMPT SUN MAY 27 22:49:18 SGT 2012
BUILD NUMBER
IML74KXXLPY
AND THE PHONE IS ROOTED.
I would like to be my phone back to stock. Just how to do I go about that? I am unable to install the LRG 4.0.4 ota or Kies.
I appreciate your help.
Humphster
Click to expand...
Click to collapse
1. Please post in the correct Forum (Q&A)
0. Before you post that question, read the many stickies and really good threads for this.
Good Luck
humphster said:
I need some advice. My current situation is as follows:
Android Version: 4.0.3
Baseband version n7000XXLPT
Kernel version
3.0.15
[email protected] #3-3
SMP PREEMPT SUN MAY 27 22:49:18 SGT 2012
BUILD NUMBER
IML74KXXLPY
AND THE PHONE IS ROOTED.
I would like to be my phone back to stock. Just how to do I go about that? I am unable to install the LRG 4.0.4 ota or Kies.
I appreciate your help.
Humphster
Click to expand...
Click to collapse
You won't be able to update officially as long as you are on custom kernel, first flash stock kernel for your stock rom and then update using kies. You can also flash stock GB firmware first and then update officially to 4.0.4.
You do not have to unroot to update using kies.
Jeetu1981,
Thanks. I think I'll go back to GB
humphster said:
Jeetu1981,
Thanks. I think I'll go back to GB
Click to expand...
Click to collapse
That's great if you already have GB downloaded, if not then flashing kernel if much short and easy, you can do it using mobile odin. You may be already aware but still, do not try to wipe when you are on stock kernel. Better to wipe before you flash stock kernel, if you choose this way.
Not your fault
humphster said:
I need some advice. My current situation is as follows:
Android Version: 4.0.3
Baseband version n7000XXLPT
Kernel version
3.0.15
[email protected] #3-3
SMP PREEMPT SUN MAY 27 22:49:18 SGT 2012
BUILD NUMBER
IML74KXXLPY
AND THE PHONE IS ROOTED.
I would like to be my phone back to stock. Just how to do I go about that? I am unable to install the LRG 4.0.4 ota or Kies.
I appreciate your help.
Humphster
Click to expand...
Click to collapse
jeetu1981 said:
That's great if you already have GB downloaded, if not then flashing kernel if much short and easy, you can do it using mobile odin. You may be already aware but still, do not try to wipe when you are on stock kernel. Better to wipe before you flash stock kernel, if you choose this way.
Click to expand...
Click to collapse
I downloaded and ran mobile Odin and now my phone is stuck at the "Samsung Galaxy note gt-n7000" screen. Bad day in Budapest.
Any suggestions?
humphster said:
I downloaded and ran mobile Odin and now my phone is stuck at the "Samsung Galaxy note gt-n7000" screen. Bad day in Budapest.
Any suggestions?
Click to expand...
Click to collapse
Boot loop is normal after flashing GB rom using odin, just boot in stock recovery and wipe data. But do it if you are sure that GB rom was flashed successfully? I mean did you get the "pass" message and all confirmation in odin? If yes then wipe in stock recovery.
No Joy
jeetu1981 said:
Boot loop is normal after flashing GB rom using odin, just boot in stock recovery and wipe data. But do it if you are sure that GB rom was flashed successfully? I mean did you get the "pass" message and all confirmation in odin? If yes then wipe in stock recovery.
Click to expand...
Click to collapse
Your suggestion didn't solve the problem. I'm still stuck at the boot screen.
Mobile Odin initiated the reboot so I am guess it thought it had finished correctly.
Hope you have more ideas to share.
humphster said:
Your suggestion didn't solve the problem. I'm still stuck at the boot screen.
Mobile Odin initiated the reboot so I am guess it thought it had finished correctly.
Hope you have more ideas to share.
Click to expand...
Click to collapse
None, except that try flashing GB firmware again.
gulp
jeetu1981 said:
None, except that try flashing GB firmware again.
Click to expand...
Click to collapse
I have tried that too. Odin sees the device checks the files and then stops cold.
Thanks for trying.
Can you post log, what you getting while flashing GB ROM with PC odin
-Disable firewall/antivirus
-Change USB port, don't use extension cable for USB connection
-Rebbot into download mode
-Reflash GB ROM, and any error copy logs and post here.
Whew
dr.ketan said:
Can you post log, what you getting while flashing GB ROM with PC odin
-Disable firewall/antivirus
-Change USB port, don't use extension cable for USB connection
-Rebbot into download mode
-Reflash GB ROM, and any error copy logs and post here.
Click to expand...
Click to collapse
This morning the nice folks at a Samsung service point, "fixed" my phone. We don't share a common language so all I was able to get out of the conversation was that it was "software" problem.
Here is how it stands now:
Android Version: 4.0.3
Baseband version N7000XXLPT
Kernel version
3.0.15-N70000XXLPY-CL474507
[email protected]#3
SMP Preenpt Fri May 4 04:49:06 KST 2012
BUILD NUMBER
IML74KXXLPY
The phone is NOT rooted
I assume that the changes resulted from whatever the service people did.
I would still like to get my phone back to stock but that seems like risky business to me.
My thanks to everybody lent a hand.
Hi everyone, I hope someone could help me with my problem.. So here's the thing, I have an S3 Mini (yeah is 2015 and i still using that POS phone (piece of...) but I live in Venezuela and unless you're rich or sucking the [email protected]$ of someone in the goverment, buying a new phone these day's it's almost impossible).. Getting back to topic, I want to flash a different rom than the stock one, I have my eyes on a MIUI one a saw the other day (yeah I like MIUI) and here's the problem, I tried to flash other ROM's before even that MIUI one that i just tould you about, and every time the phone do the first run with the ROM the Back and Menu buttons simply doesn't work at all, only the home button.. I already read other post of people with the almost the same problem but still can't find any answer, so I hope that this time is different.. What I did find was that the problem is and im almost sure that that's the problem, is with the kernel, because every ROM that I flashed is based on android 4.4.4 and with a custom kernel, and ofcourse my phone is stock with the stock kernel, here's some stuff you may want to know:
Model N°
GT-I8190
Android Version
4.1.2
Base Band Version
I8190XXAMG4
Kernel Version
3.0.31-1332988
[email protected] #2
SMP PREEMPT Sun Jul 28 14:54:47 KST 2013
Compilation Number
JZO54K.I8190XXAMG4
You may want to know that i have the phone rooted and with a custom recovery (TWRP 2.8.0.0) and all of that i did it without ODIN or Kies, for rooting i don't remember exactly what i used, but i think it was and apk that comes from here on XDA, that roots the phone with one click, and it worked because since then i never had any issues.. And for the custom recovery I think i flash it via Download mode or something like that.. The thing is that i don't remember at all using Odin or something for doing any of that (rooting, recovery and flashing a ROM).
So can you help me? do i need to use Odin to flash that MIUI rom in order to avoid getting my Back and Menu buttons damage? or what can I do? I really want that ROM I hate the stock one (i honestly hate Samsung but im stuck with this phone for now -.-)
Thank you! and yeah sorry for bad english blah blah, is not my first lenguage
Good news folks, I know how hard it is to locate a Lollipop firmware for the AT&T S5.
By chance, I've stumbled across exactly that.....well, sort of.......
The firmware I found IS for AT&T, and it IS lollipop, but it's not a regular single file firmware.
It is what the hosting website calls a 'repair' firmware which means that it is more than likely to be separate Bootloader, Modem and OS files. These will have to be loaded into their corresponding 'slots' within Odin.
Here is the website....
http://www.tsar3000.com/Joomla/inde...ader-csc-pit-files&catid=55:samsung&Itemid=82
Here is the direct link to the firmware....
https://www.androidfilehost.com/?fid=24591000424940454
This is what you are downloading...
G900AUCU4COI5_ATT4COI5_v5.1.1_Repair_Firmware
This is what's in the zip.....
AP_G900AUCU4CO15_CL5869384_QB6398515_REV00_user_low_ship_MULTI_CERT.tar.md5
BL_G900AUCU4CO15_CL5869384_QB6398515_REV00_user_low_ship_MULTI_CERT.tar.md5
CP_G900AUCU4CO15_CL5869384_QB6398515_REV00_user_low_ship_MULTI_CERT.tar.md5
CSC_ATT_G900AUCU4CO15_CL5869384_QB6398515_REV00_user_low_ship_MULTI_CERT.tar.md5
KLTE_USA_ATT.pit
Being a 'repair' firmware, if I understand the way they work correctly, it will erase and format the data partitions (instead of simply overwriting them) as it flashes. This should give a totally clean install.
Caveat......I don't own the AT&T variant so I can't test it, I just thought I'd share what I'd found in case it was needed by anyone.
http://i.imgur.com/rVnFwJM.jpg
This firmware is confirmed as working.
See this thread.....
http://forum.xda-developers.com/showthread.php?t=3259567
http://i.imgur.com/rVnFwJM.jpg
who has comfirmed it?
dsmedia24 said:
who has comfirmed it?
Click to expand...
Click to collapse
Read the thread linked to in the post above yours.... @Theamazingcorey says he has successfully flashed it......
http://i.imgur.com/rVnFwJM.jpg
I can also confirm that it is working. I used it the other day and it flashed without a problem. I am back to stock after I soft bricked my AT&T Galaxy S5.
Theamazingcorey said:
I can also confirm that it is working. I used it the other day and it flashed without a problem. I am back to stock after I soft bricked my AT&T Galaxy S5.
Click to expand...
Click to collapse
Hi fella, can you post the build details to this thread please....build date, build number etc....
http://i.imgur.com/rVnFwJM.jpg
Android Version
5.1.1
Baseband Version
G900AUCU4COI5 (or could be 015 at the end)
Kernel Version
3.4.0-5869384
[email protected] #1
Tue Sep 22 21:22:27 KST 2015
Build Number
LMY47X.G900AUCU4COI5