Database Develop

[Q] Best Kernel / Rom combination for the I9070

Hello,
So after getting some knowledge of the things (thanks Shut_Down :good, I was wondering which is the best combination for this phone?
Right now I am running the stock ROM and kernel.
Will the new official JB upgrade also change kernel or just ROM?
Since people here have already tried different combinations, which combinations have you found that give good, consistent and fast running?
Thanks!

R: [Q] Best Kernel / Rom combination for the I9070
I use stock ROM with thunderzap 3.5 kernel
Sent from my GT-I9070 using xda premium

KINGbabasula said:
I use stock ROM with thunderzap 3.5 kernel
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
chucky-bean v5 + cocore-E 2.9 nighly(CWM)

Chucky Bean v6; Cocore_E 2.9 CWM
Envoyé depuis mon GT-I9070

Well, I did't expect this...
Thanks for your replys!
Funny thing is that each of you have a different combination.
Any one actually did testing which combo is better? Or maybe i sould ask, why are you using he combinations you wrote?

KINGbabasula said:
I use stock ROM with thunderzap 3.5 kernel
Click to expand...
Click to collapse
Same here. Stock JB LQ4 + ThunderZap 3.5.

So I am guessing I will upgrade to the stock JB ROM (till there will be a JetMod version of JB).
1) Which would be a better kernel set CoCore or ThunderZap?
2) I am right now still running the stock GB ROM.
What would be the right upgrade process kernel update then rom, or rom and then kernel?
The reason I am thinking kernel first is because I still don't have a custom recovery (using the stock brand) so i can't backup or load new roms.
What do you think?
Thanks!

Одг: [Q] Best Kernel / Rom combination for the I9070
YMatrix said:
So I am guessing I will upgrade to the stock JB ROM (till there will be a JetMod version of JB).
1) Which would be a better kernel set CoCore or ThunderZap?
2) I am right now still running the stock GB ROM.
What would be the right upgrade process kernel update then rom, or rom and then kernel?
The reason I am thinking kernel first is because I still don't have a custom recovery (using the stock brand) so i can't backup or load new roms.
What do you think?
Thanks!
Click to expand...
Click to collapse
Try both and see what firs you better. And about order, you can install ROM with temp. CWM, but I suggest you use permanent, with custom kernel. So first kernel, than ROM.
Sent from Galaxy S Advance

Thanks mate! Again you helped.
If I install the stock ROM will I be able to get it in my local language (Hebrew), or do I need to download a specific ROM that is already in my language?

YMatrix said:
Thanks mate! Again you helped.
If I install the stock ROM will I be able to get it in my local language (Hebrew), or do I need to download a specific ROM that is already in my language?
Click to expand...
Click to collapse
Hm, on this Russian JB there is no Hebrew as I see. So if you want it you should wait for release for your country or any with your language.

shut_down said:
Hm, on this Russian JB there is no Hebrew as I see.
Click to expand...
Click to collapse
Where is this information posted? Because I checked sammobile, and I couldn't even find the GB version of my language

YMatrix said:
Where is this information posted? Because I checked sammobile, and I couldn't even find the GB version of my language
Click to expand...
Click to collapse
we actually have the ROM in our phone bro!

Brainiac.shri said:
we actually have the ROM in our phone bro!
Click to expand...
Click to collapse
You mean that each ROM usually supports all the languages?

YMatrix said:
You mean that each ROM usually supports all the languages?
Click to expand...
Click to collapse
a lot. but in this case hebrew isnt listed sorry!

Before installing a ROM is there an option to view which languages it supports?

Одг: [Q] Best Kernel / Rom combination for the I9070
YMatrix said:
Before installing a ROM is there an option to view which languages it supports?
Click to expand...
Click to collapse
No, unless dev write it on its thread.
Sent from Galaxy S Advance

OK, Thanks.
Last question, when just changing kernel, do I need to do any wipes / resets (I have read about dalvik cache, factory wipes etc.) ? Or is that just for when installing new ROM's?

YMatrix said:
OK, Thanks.
Last question, when just changing kernel, do I need to do any wipes / resets (I have read about dalvik cache, factory wipes etc.) ? Or is that just for when installing new ROM's?
Click to expand...
Click to collapse
roms only.

Hey sir plz help me...
I have samsung s advance... i9070
I flash it with odin to xxlpz 4.1.2
But its has so many buggs so I go to Samsung care to flash it back to 2.3
But they are saying my binaries are increased... so need to change my pci or bord...
And when I try to again update to ddl4 fremware it shows successful but phone was not starting...
Plz help me out sir..

Одг: [Q] Best Kernel / Rom combination for the I9070
Rahul125125 said:
Hey sir plz help me...
I have samsung s advance... i9070
I flash it with odin to xxlpz 4.1.2
But its has so many buggs so I go to Samsung care to flash it back to 2.3
But they are saying my binaries are increased... so need to change my pci or bord...
And when I try to again update to ddl4 fremware it shows successful but phone was not starting...
Plz help me out sir..
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2100642
Sent from Galaxy S Advance

[Q]galaxy note jelly bean language

helllo i cant find chinese on the language setting anyway to install it???
i using galaxy note n7000
jelly bean xxlsz rooted

haoooo93 said:
helllo i cant find chinese on the language setting anyway to install it???
i using galaxy note n7000
jelly bean xxlsz rooted
Click to expand...
Click to collapse
you need a rooted Rom based on ZSLM5, XXLSZ doesn't contain Chinese.

ThaiDai said:
you need a rooted Rom based on ZSLM5, XXLSZ doesn't contain Chinese.
Click to expand...
Click to collapse
erm is there anyway to install ZSLM5 after i install xxlsz offical firmware without root

haoooo93 said:
erm is there anyway to install ZSLM5 after i install xxlsz offical firmware without root
Click to expand...
Click to collapse
If you install a new Rom the old one is removed (the scripts install the new one to /system and /preload after deleting the old content of these two partitions).
So after installing ZSLM5 you'll get Chinese but you won't have XXLSZ.
But why do you not want to install ZSLM5 - they are the official JB releases for these countries?

I Can't Flash any Rom !!! HELP

hi guys ..
i am on xxlsa 4.1.2
i wanna flash Jellybeer or avatar rom .. but every time there's this prob "
picture ( in attachment)

ALSHAB said:
hi guys ..
i am on xxlsa 4.1.2
i wanna flash Jellybeer or avatar rom .. but every time there's this prob "
picture ( in attachment)
Click to expand...
Click to collapse
Flash lastest CM kernel and then try.

Thank you .. but if i want to go back to xxlsa should i flash kernel or rom first ?

ALSHAB said:
Thank you .. but if i want to go back to xxlsa should i flash kernel or rom first ?
Click to expand...
Click to collapse
Just flash the rom and the kernel will be replaced

ALSHAB said:
hi guys ..
i am on xxlsa 4.1.2
i wanna flash Jellybeer or avatar rom .. but every time there's this prob "
picture ( in attachment)
Click to expand...
Click to collapse
can you upload updater-script from the rom, so we can have a look
.

Galaxy S plus i9001-Ican't flash any custom Rom from stock Rom

I'm on stock Rom GB 2.3.6 on my Samsung s plus and I tried to flash any Cyanogen Custom Rom in CWM ( Ics and Jb) and Always i get the same answer . O f course I rooted My phone ,Installed CWM and did all the wipes .Always the same answer no matter what version of Custom rom I tried to flash.What can I do?

Makesure you have to use correct version of cwm to install the cm. I recommend try cyanogenmod 10.1 JB 4.2.x . GO to the cyanogen official rom post (under ADC team).
FOllow all the instruction that stated inside the topic.
Any mismatch of the version of installation can fail to install rom.
Example:
http://forum.xda-developers.com/showthread.php?p=42346733
Sent from my GT-I9001 using xda app-developers app

iulian vu said:
I'm on stock Rom GB 2.3.6 on my Samsung s plus and I tried to flash any Cyanogen Custom Rom in CWM ( Ics and Jb) and Always i get the same answer . O f course I rooted My phone ,Installed CWM and did all the wipes .Always the same answer no matter what version of Custom rom I tried to flash.What can I do?
Click to expand...
Click to collapse
You have i9001
The rom you try to flash is for i9000

mihaitosca said:
You have i9001
The rom you try to flash is for i9000
Click to expand...
Click to collapse
Exactly.
Looks like your installation is failing because the file is for an I9000B. If you want to use CM10.1 on an I9001, you'll need to go here.

Hi, i am noob i need help

Hi, i am noob i need a help for upgrade and root my phone.
I am from Serbia and I have this phone I9070, Gingerbread 2.3.6 I9070XXLK2 and Kernel is 2.6.35.7-1211579
I want o backup my original kernel.
And how to upgrade on JB 4.1.2 + root + custom kernel, I heard that the i9070 works poorly on JB and has bugs and custom kernel can fix that i think
Which is the best version of JB for stability and performance without lag and bugs? Stock or custom?
Which is the best kernel for my I9070?
And how to root my phone?
Thanks

Myl0sh said:
Hi, i am noob i need a help for upgrade and root my phone.
I am from Serbia and I have this phone I9070, Gingerbread 2.3.6 I9070XXLK2 and Kernel is 2.6.35.7-1211579
I want o backup my original kernel.
And how to upgrade on JB 4.1.2 + root + custom kernel, I heard that the i9070 works poorly on JB and has bugs and custom kernel can fix that i think
Which is the best version of JB for stability and performance without lag and bugs? Stock or custom?
Which is the best kernel for my I9070?
And how to root my phone?
Thanks
Click to expand...
Click to collapse
Hello. I am from Serbia too, and there is another user with same name as you. I will send you on private message what to do. Tomorow evening. Just remind me. And you can ask me whatever you want. We have official JB firmware. With CoCore kernel it is good. And i will suggest you to use CM10.1 or Omni ROM.
Sent from my GT-I9070 using Tapatalk

shut_down said:
Hello. I am from Serbia too, and there is another user with same name as you. I will send you on private message what to do. Tomorow evening. Just remind me. And you can ask me whatever you want. We have official JB firmware. With CoCore kernel it is good. And i will suggest you to use CM10.1 or Omni ROM.
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
I send private message on you, but in my folder "sent items' have 0 messages. PM work in this forum?

Myl0sh said:
I send private message on you, but in my folder "sent items' have 0 messages. PM work in this forum?
Click to expand...
Click to collapse
Yes.. PM system works in this forum..
- You can send it again for confirmation, I'm sure shut_down won't mind
- There is an option to either save or not save your sent messages.. so maybe its set to "don't save"
Sent from my Calculator using XDA Premium

When I upgrade my android, did I need to calibrate battery, compass, or something? I read somewhere, some user have bad GPS signal in JB. My GPS signal on GB 2.3.6 is excellent. I dont want to lose my perfect GPS
Thanks

Myl0sh said:
When I upgrade my android, did I need to calibrate battery, compass, or something? I read somewhere, some user have bad GPS signal in JB. My GPS signal on GB 2.3.6 is excellent. I dont want to lose my perfect GPS
Thanks
Click to expand...
Click to collapse
Its not necessary.. I never did that and yet I've never experienced any issues like that.. you are only required to do it if in case you experience those issues..
Sent from my Calculator using XDA Premium

I successfully install JB and i use HarshJelly ROM v4.01
How can i fix Live wallpaper not working on HarshJelly ROM v4.01?
http://forum.xda-developers.com/showthread.php?t=2342314
I can't replay there coz i have only 4 posts
Thanks

Myl0sh said:
I successfully install JB and i use HarshJelly ROM v4.01
How can i fix Live wallpaper not working on HarshJelly ROM v4.01?
http://forum.xda-developers.com/showthread.php?t=2342314
I can't replay there coz i have only 4 posts
Thanks
Click to expand...
Click to collapse
I tried to set a live wallpaper on my phone , it is working, im on harshjelly 4.0 too. What kind of issues you have?

I always used well jelly bean with CoCore 8.2 kernel and ROM deodex without any locking

Charles Augusto said:
I always used well jelly bean with CoCore 8.2 kernel and ROM deodex without any locking
Click to expand...
Click to collapse
[email protected] said:
I tried to set a live wallpaper on my phone , it is working, im on harshjelly 4.0 too. What kind of issues you have?
Click to expand...
Click to collapse
I use CoCore 8.2 to.
Here is error..see screenshot
I did not install any live wallpaper coz i want to use stock live wallpaper.

Now i update my SGSA with CoCore 8.6 and update HarshJelly ROM v4.01 to V5 and i have same error

Myl0sh said:
Now i update my SGSA with CoCore 8.6 and update HarshJelly ROM v4.01 to V5 and i have same error
Click to expand...
Click to collapse
Have you done wipe cache and wipe dalvik cache?

shut_down said:
Have you done wipe cache and wipe dalvik cache?
Click to expand...
Click to collapse
I did wipe cache and wipe Dalvik cache and i have same error.
I just install live wallpaper from goole play and error is fixed