please help me in fixing my phone, i flashed paranoid androoid rom 4.1.2 with kowalski kernel from tonyps thread recently, i downloaded cf3d and tried to install the drivers. however the phone does not boot up completely anymore(shows normal lg icon and then shows two small lg icons and gets stuck there forever) and i cannot boot into cwm
atd124125 said:
please help me in fixing my phone, i flashed paranoid androoid rom 4.1.2 with kowalski kernel from tonyps thread recently, i downloaded cf3d and tried to install the drivers. however the phone does not boot up completely anymore(shows normal lg icon and then shows two small lg icons and gets stuck there forever) and i cannot boot into cwm
Click to expand...
Click to collapse
Thats because CF3D isnt supported on Android 4.0 and above. Reflash the ROM and it should be fine again
Related
So first i'll explain whats the problem.
I went from Slim ICS to stock android 2.3.5 XXJVT. After that I flashed the rooted kernel via Odin, including CWM.
So I got to the recovery and wiped everything and flashed the a cm9 nightly, this was in the instructions SlimICS If coming from stock GB. While installing it stopped after a few seconds and rebooted to recovery where a few lines came up amd rebooted again, alot of red letters flashed between the reboots and it kept rebooting.
I have tried other roms with a similar result:
-After install, comes to kernel loading screen reboots straight into recovery.
-Tried infinitum, succesfully installed actually started OS but got an error acreen in android itself, saying something about encryption or something (forgot it).
I know this is a long story but i've been trying to flash ics again for a lot of hours with a lot of fixes but nothing succesfull.
I hope you guys know more then me. If you need more info please ask, im pretty issed of by phone right now.
Thanks
On I9000
Pull out the battery.put back in.go to recovery and flash again.reboot.
It's does this because u need to be on an ics kernel for it to flash the rom properly.it's perfectly normal.don't worry
It only happens when upgrading the os or flashing cm9 the FIRST time
zodiaxe66 said:
Pull out the battery.put back in.go to recovery and flash again.reboot.
It's does this because u need to be on an ics kernel for it to flash the rom properly.it's perfectly normal.don't worry
It only happens when upgrading the os or flashing cm9 the FIRST time
Click to expand...
Click to collapse
Thanks! I'll try and see what it does. I'll let you know
Take a look here:
http://forum.xda-developers.com/showthread.php?t=1627689
ZioGTS said:
Take a look here:
http://forum.xda-developers.com/showthread.php?t=1627689
Click to expand...
Click to collapse
And how would this help non devs and noobs?????????????
If u have no intention of helping why post
A friend of mine gave me his LG Optimus 2x phone to installed AOKP M5 based on ICS 4.0.4. Currently his phone is running on ANdroid 2.2.2. I rooted this phone with SuperOneclick program successfully. AFter this I installed ROM Manager but when I tried to flash it with clockwork recovery through ROM Manager, it failed and after boot, it went in infinite boot loop. I managed to break the boot loop by pressing power and lower volume button together. Now I am stuck and don't know to proceed further.
I have Samsung Galaxy Nexus and Moto Xoom and it was lot easier to install custom ROM.
I will appreciate your help with some instructions.
Hi. Try to do wipes; cache partition, factory; davlick (advanced) and reflash again the said ROM. What CWM version you have? I would suggest 5.0.2.8, I have no problems on it. I flashed several roms, CM7 and CM9.
Hope it helps.
If I understood you don't have cwm installed correctly.
Try this: http://forum.xda-developers.com/showthread.php?p=18939518
Nvflash never fails.
And I'm not sure aokp works good on our phone, due to hard hacks necessary to run ics with outdated kernel sources concerning CPU and GPU chipset.
In case you can try Owain's unofficial builds not so far from aokp.
Striatum_bdr said:
If I understood you don't have cwm installed correctly.
Try this: http://forum.xda-developers.com/showthread.php?p=18939518
Nvflash never fails.
And I'm not sure aokp works good on our phone, due to hard hacks necessary to run ics with outdated kernel sources concerning CPU and GPU chipset.
In case you can try Owain's unofficial builds not so far from aokp.
Click to expand...
Click to collapse
Thanks a lot. NVFlash resolved the issue.
Hi, i'm new in the android scene and need your help. I flashed my phone with CM9 (Wisp) and i got "encryption unsuccessful" error, so decided to install other rom, the problem is that any rom i install get stuck in the boot logo (i've waited like 30 min to see if boots). Only cm9 boots, but still having the encryption issue. It would be nice to get your help people. Thanks
supermd said:
Hi, i'm new in the android scene and need your help. I flashed my phone with CM9 (Wisp) and i got "encryption unsuccessful" error, so decided to install other rom, the problem is that any rom i install get stuck in the boot logo (i've waited like 30 min to see if boots). Only cm9 boots, but still having the encryption issue. It would be nice to get your help people. Thanks
Click to expand...
Click to collapse
I need to ask these question :
a. Did you already upgraded your Mini into Gingerbread ?
b. Did you already have ClockWorldMod 5.0.2.8 / 6.0.1.5 (Recommended 5.0.x.x Touch )
c. Did you already rooted your device
F4uzan said:
I need to ask these question :
a. Did you already upgraded your Mini into Gingerbread ?
b. Did you already have ClockWorldMod 5.0.2.8 / 6.0.1.5 (Recommended 5.0.x.x Touch )
c. Did you already rooted your device
Click to expand...
Click to collapse
a. Used to have Stock Gingerbread, after the encryption issue i tried flashing with some gb roms based on cm7.2
b. I have CWM 5 Touch
c. Already rooted
Thanks
he said he tried encrypting that means he had atleast ics rooted with cwm recovery
@op
data partition may have got corrupted or something like that so I will suggest you to flash a 4 package firmware through odin
Just rooted my phone and tried to instal CM10.1 but now the phone wont start,its stucked at the LG logo.
The only thing thats working is the CWM.
I have tried another version of CM10.1 but still wont start.
SirIntegra said:
Just rooted my phone and tried to instal CM10.1 but now the phone wont start,its stucked at the LG logo.
The only thing thats working is the CWM.
I have tried another version of CM10.1 but still wont start.
Click to expand...
Click to collapse
Are you on new bootloader when you tried to install CM10.1? (New Bootloader = LG with Red splash, Old Bootloader = Pure White LG letters with Icon) You must be on old Bootloader (For Gingerbread) before doing so.... I recommend you clean first the bootloader and partition using WKPARK's file and guide here: http://forum.xda-developers.com/showthread.php?t=1968280, APX Drivers can be grabbed here: https://www.box.com/s/c5d0e911cz9jhz3ab9y1 Credits to umar for reuploading. After that you will have to mount cleaned system on CWM and format your internal SD, then flash nightly rom patched by Wkpark's CM10 patcher so that buttons would work, and flash su660ics' provided kernel by a vietnamese developer here.
Well,thank you verry much for the info!
Anyway,now i`m back tt the stock ROM (GB 2.3.4).
But i still wanna instal CM10.1,or at least CM10 and i`m still wondering why the installation didnt work ??
I mean,i have followed 100% a tutorial on how to install CM10.1.
I tried once but the phone booted with the same ICS 4.0.4,then i tried again,the same result,and the last time when i tried i got stuck at that LG logo,but now its ok.
But how can i install CM10.1 or another version ?? I didnt do anything wrong...i think it didnt work because there are some problems that i`m not aware of...
guys a had some really bad time running into this faulty ICS ROM and den by fault bricking it.
then after searching for hours i found this post by forest1971 here http://forum.xda-developers.com/showthread.php?p=26285877for unbricking GNOTE by repatitioning the internal sdcard after finding faulty bricked blocks.
as i could not reboot into recovery.
so i used one of the PIT files provided in his post and flashed it via PC ODIN to revive my bricked GNOTE.
later i was able to get into recovery.
then i thought of flashing STOCK jelly bean DDLSC 4.1.2 ROM and i was able to flash it easily via PC ODIN.
then i phone rebooted and got stuck on samsung jelly bean BOOT screen.
i waited for hours for it to start(pass that boot screen) but all in vain.
SO now i ma stuck at the BOOT screen so can any1 please help me and tell me what to do now??
first try flash safe kernel, use philz kernel, flash it from recovery(.zip) or pc odin(.tar) reboot recovery, and make full wipe..reboot your phone..
if still stuck on bootloop.
maybe TW Rom is to big for you now, try flash Slim Bean
Just make sure you have safe kernel+cwm first.
zai89 said:
first try flash safe kernel, use philz kernel, flash it from recovery(.zip) or pc odin(.tar) reboot recovery, and make full wipe..reboot your phone..
if still stuck on bootloop.
maybe TW Rom is to big for you now, try flash Slim Bean
Just make sure you have safe kernel+cwm first.
Click to expand...
Click to collapse
first of all thanks for replying that fast..
and second thing is that i am not in a bootloop instead my phones just stuck at the samsung BOOT screen.
somehow if i keep rebooting again and again i get to pass that BOOT screen but then my phone would get stuck at "android is upgrading" screen or it pass that too then it would freeze at those startup wizard configuration mostly at the wifi page.
Also i did try to install paranoid 3.15 and had the same result (stuck at bOOT screen) so i think i mean i think (not much of an expert in this kind of stuff) the size is not a problem.
and also i have flashed this safe PHILZ kernel for DDLSC which i am using now.
prince4p91 said:
first of all thanks for replying that fast..
and second thing is that i am not in a bootloop instead my phones just stuck at the samsung BOOT screen.
somehow if i keep rebooting again and again i get to pass that BOOT screen but then my phone would get stuck at "android is upgrading" screen or it pass that too then it would freeze at those startup wizard configuration mostly at the wifi page.
Also i did try to install paranoid 3.15 and had the same result (stuck at bOOT screen) so i think i mean i think (not much of an expert in this kind of stuff) the size is not a problem.
and also i have flashed this safe PHILZ kernel for DDLSC which i am using now.
Click to expand...
Click to collapse
reboot in download mode if you can and use pc odin to flash the ASOP ROM like supernexus 2.0 http://forum.xda-developers.com/showthread.php?t=2076697
this may resolve the issue.
Mayank Chandwani said:
reboot in download mode if you can and use pc odin to flash the ASOP ROM like supernexus 2.0 http://forum.xda-developers.com/showthread.php?t=2076697
this may resolve the issue.
Click to expand...
Click to collapse
yes i can reboot into download mode.
but the thing is that i have flashed this stock DDLSC ROM and i was able to make it run by rebooting system 3-4 times
but later on it would freeze after like 10-20 seconds and then i have to reboot the system again and
the ROM will start but again freezes within 10-20 seconds of startup.
so please help me to get rid of dese freezes.
PS- ill try flashing this supernexus 2 ROM lets see what happens