i have xz and tried to flash Rom and when i finish(i use cwm recovery) i marked -stop recovery fix-and that's was my biggest problem the mobile is now dead and working when i try to run it its just don't work its can not charge-no led light-and when i connect it to my pc its just not read and nothing happen i have unlocked boot loader
i need help plzz :crying::crying::crying::crying:
alimohmmed said:
i have xz and tried to flash Rom and when i finish(i use cwm recovery) i marked -stop recovery fix-and that's was my biggest problem the mobile is now dead and working when i try to run it its just don't work its can not charge-no led light-and when i connect it to my pc its just not read and nothing happen i have unlocked boot loader
i need help plzz :crying::crying::crying::crying:
Click to expand...
Click to collapse
Flashing your phone can't damage it physically, the problem must be another thing, tro to restore it with Sony Update Service, also i don't understand your charging problem but if it's not charging maybe you damaged your phone or it's not correctly detected on windows. try to reinstall all drivers just in case.
same
QualQuek said:
Flashing your phone can't damage it physically, the problem must be another thing, tro to restore it with Sony Update Service, also i don't understand your charging problem but if it's not charging maybe you damaged your phone or it's not correctly detected on windows. try to reinstall all drivers just in case.
Click to expand...
Click to collapse
thanks for the replay,my mobile is not charging and when i press the power button and vol+ its not working at all
i cant use sus because it cant be recognize and i tried to reinstall the drivers and nothing happen
alimohmmed said:
thanks for the replay,my mobile is not charging and when i press the power button and vol+ its not working at all
i cant use sus because it cant be recognize and i tried to reinstall the drivers and nothing happen
Click to expand...
Click to collapse
Ok so maybe it's your USB cable, have you tried with another one?
If it's the same with another USB cable i have bad news for you...
alimohmmed said:
i have xz and tried to flash Rom and when i finish(i use cwm recovery) i marked -stop recovery fix-and that's was my biggest problem the mobile is now dead and working when i try to run it its just don't work its can not charge-no led light-and when i connect it to my pc its just not read and nothing happen i have unlocked boot loader
i need help plzz :crying::crying::crying::crying:
Click to expand...
Click to collapse
unfortunately similar to hard-bricked
and u cannot easily repair it unless u be so lucky
take to professional service center
:good:
x102x96x said:
unfortunately similar to hard-bricked
and u cannot easily repair it unless u be so lucky
take to professional service center
:good:
Click to expand...
Click to collapse
Even a hard-bricked phone should charge no?
QualQuek said:
Even a hard-bricked phone should charge no?
Click to expand...
Click to collapse
No charge
No LED
No USB connectivity
Hard-Brick (if i m correct) is some problems both in software and hardware
maybe problem on kernel, bootloader, recovery or in hardware part problem in power & etc.
x102x96x said:
No charge
No LED
No USB connectivity
Hard-Brick (if i m correct) is some problems both in software and hardware
maybe problem on kernel, bootloader, recovery or in hardware part problem in power & etc.
Click to expand...
Click to collapse
Yep you're right, brick is a literal term, it turns your device into a paperweight, AKA A brick.
Bricking a device goes beyond the actual components. You can brick ANY electrical device through MANY means. Bricking, in short often relates to some process that will often permanently destroy your device software-wise. It is often unrepairable except for that usual rare method that MAY save the device.
Bricking usually involves the firmware of a device and the very hidden memory that is often carried over through hard resets and such. Think of it like the "Brain" of your device. If it gets ever so slightly tampered with in the wrong way (such as a flash, which would be the equivalent of brain surgery here) it can be permanently damaged forever.
then what should i do
then what should i do
if i send it to sony service center will they know if it unlocked
and i left it for a full night on charging i have tried every thing i know but still not working
what should i do :crying::crying::crying:
alimohmmed said:
then what should i do
if i send it to sony service center will they know if it unlocked
and i left it for a full night on charging i have tried every thing i know but still not working
what should i do :crying::crying::crying:
Click to expand...
Click to collapse
Many stores offer to repair hard-bricked phones for some bucks, jut take a look in google...
http://forum.xda-developers.com/showthread.php?p=40145013
Related
Hello,
Few days ago I bought my girlfriend an X8.
Since I have too an X8 with all the root and such things done I though it might be a good idea to do that on girlfriend phone.
BUT, second day after buying that phone, and trying to get exact modifications I did on my X8 , her phone got hard bricked and I couldn't boot it up, not even to recovery mode since computer usb didn't recognize it anymore...
I think i was in phase while trying to get root access..
So, I went to the shop to get my replacement phone wich they did gave me...
Soon after I got home, I was trying again to make same modifications, and it was sucesfull... I installed custom rom, with root access and that was it...
BUT here comes the problem - while trying to use Titanium Backup , i was constatly getting the message that my phone isn't rooted so I downloaded root checker from market and yes, it said that i'm not rooted... Funny thing, busybox and superuser worked just fine...Then i though it might be a problem cause I didn't update superuser on latest version, so I did it, and now the superuser told me i'm not rooted...
To make long story short, i came up to flash stock rom, and then back to custom rom to make clean install again, this time I wanted to unlock bootloader too to put a custom kernel for that rom, but after the process, phone quickly restarted 2 times and from then it doesn't want to boot up, just like the first phone, doesn't react on power button not even to usb...
I'm so frustrated because on my X8 everything went fine, and i did on her exactly what I did on mine, but I bricked her 2 new phones and I don't know what to do next
Is there any way to back it up to life again??? (i think they won't replace my phone again at the shop)
alenal5 said:
To make long story short, i came up to flash stock rom, and then back to custom rom to make clean install again, this time I wanted to unlock bootloader too to put a custom kernel for that rom, but after the process, phone quickly restarted 2 times and from then it doesn't want to boot up, just like the first phone, doesn't react on power button not even to usb...
Click to expand...
Click to collapse
what custom room you using to unlock bootloader?
You can't even use the Repair section of the PC Companion?
what ROM do you use when you try to unlock bootloader?
I was using stock rom (Elcair) when i tried to unlock bootloader...
and none of the usb methods works cause it doesn't get recognized by PC...
Uff...to any hard brick,your phone should get flash mode with fleshtool or seus/pcc..maybe its some mistake..to root phone,easier way is with fleshtool..
Sent from my E15i using XDA App
Do you have install PC Companion?
Sent from my X8 using XDA Premium App
have you tried installing ggsetup-2.2.0.10.exe and trying on another usb slot? the file is in FlashTool_0.2.9.1 package
Yes, i've installed Gordons Gate, but phone wont go into recovery mode anymore and it doesn't flash led when I plug the charger into phone (i've left it last night on charger but no success)...Complete deadly now cause of bootloader unlock, strange...
alenal5 said:
Yes, i've installed Gordons Gate, but phone wont go into recovery mode anymore and it doesn't flash led when I plug the charger into phone (i've left it last night on charger but no success)...Complete deadly now cause of bootloader unlock, strange...
Click to expand...
Click to collapse
this is strange.. not reacting on usb..
when u turn off the phone then plug usb cable + pressing back button i call that downloading mode.
I don't know how to help u anymore..
btw what rom u're installed when the phone restarted twice? is it overclocked?
just curious
It was stock rom -> Eclair 2.1
No overclocking modules were installed...
I've came upon some similar thread on the internet, the guy had same problem, and someone suggested him that the only way to restore the device is to put it on RIFF JTAG box
Links are here:
jtagbox.com/jtag-news/riff-jtag-sony-ericsson-xperia-x8a-se-shakira-unbrick-boot-repair-supported/
youtube.com/watch?v=ujH_IpsskLg
....
So, my question for now is - Can I buy JTAG box from ebay, and soldered PCB for X8 from here ( multi-com.pl/index.php?itlskel_lang=en_US&itlskel_pgid=details&id_pr=8466 )...
Will that work it out ? Question goes to JTAG users hopefully.
Please modify URL's since I can't put full URL's yet
you just bought the phone rite? send it to service.
no need to buy anything to do it yourself. That riff box costs around $150 and there are people in various cities who might be able to repair your phone (check website of riff box) with fees but try with SE service centre first. You might get it done for free.
If you have followed the steps it really should not end up like that. It is really discouraging to read posts like yours. It makes me ponder twice whether I should go and try the unblock my bootloader myself.
vientito said:
you just bought the phone rite? send it to service.
no need to buy anything to do it yourself. That riff box costs around $150 and there are people in various cities who might be able to repair your phone (check website of riff box) with fees but try with SE service centre first. You might get it done for free.
If you have followed the steps it really should not end up like that. It is really discouraging to read posts like yours. It makes me ponder twice whether I should go and try the unblock my bootloader myself.
Click to expand...
Click to collapse
I think SE center won't cost $150 (and if cost that much rather than buying those tools or pay SE i will buy another x8 it cost cheaper than that).
I agree with you, send it back to SE center and tell them u're upgrading phone software but the the power or internet down in the middle of process and your phone dead.
No, the thing is, i've already told them I was upgrading my software and phone crashed when I swaped my first phone, so if I send them back another phone in that short time I'll become suspect, and I highly doubt they'll accept my warranty
btw. I really don't know what could be the reason for bricking
Basebands versions were xxx015 on the both devices...
men try again with seus
just turn your pc/windows on safe mode with networking
ive experience that
then
do this like i said in other thread
try it again with this steps
open pc companion (dont plug your phone)
choose support zone click start
select phone software update
click start
then CLICK REPAIR PHONE
and that its you know the next step
you will see initializing AND downloading the phone software
Will try it tonight but I higly doubt since phone doesn't react with LED anyhow
Thank you for your tip anyway
xpraken said:
men try again with seus
just turn your pc/windows on safe mode with networking
ive experience that
then
do this like i said in other thread
try it again with this steps
open pc companion (dont plug your phone)
choose support zone click start
select phone software update
click start
then CLICK REPAIR PHONE
and that its you know the next step
you will see initializing AND downloading the phone software
Click to expand...
Click to collapse
No led respone when usb connected and press back button...impossible you can run pc companion or seus..
alenal5 said:
No, the thing is, i've already told them I was upgrading my software and phone crashed when I swaped my first phone, so if I send them back another phone in that short time I'll become suspect, and I highly doubt they'll accept my warranty
btw. I really don't know what could be the reason for bricking
Basebands versions were xxx015 on the both devices...
Click to expand...
Click to collapse
There's nothing wrong trying right?
Besides if they're not accepting your warranty you will pay anyway...
And if SE center tell you to pay ask them how much in front before doing any reparation.
Maybe $10, $20 etc i doubt it will cost as high as new phone.
help... i am also in the same situation..my phone bricked when i was bootloading , now its completely black and it cant on ...when i connect to pc , pc cant detect ..help please..i just bought my w8 about 3weeks only ..my dad's present ...hlp please
Hi i have at&t sony tl locked bootloader im in hard brick i belive i flashed a kernel for the 195 stock rom as i moved from the 303 rom any way when i flashed in flashTool it said it was done unplugg and start phone when i unplugged and tryed to turn on nothing happend no viberation no lights i cant get into flash mode when i plugg it into laptop it installs drivers but no lights nothing mynlaptop dont reconize it it happend two nights ago i left it on charge last night any ideas would be great i bought the phone used so no warrenty
pikeylfc said:
Hi i have at&t sony tl locked bootloader im in hard brick i belive i flashed a kernel for the 195 stock rom as i moved from the 303 rom any way when i flashed in flashTool it said it was done unplugg and start phone when i unplugged and tryed to turn on nothing happend no viberation no lights i cant get into flash mode when i plugg it into laptop it installs drivers but no lights nothing mynlaptop dont reconize it it happend two nights ago i left it on charge last night any ideas would be great i bought the phone used so no warrenty
Click to expand...
Click to collapse
try repairing it using SEUS or PC COmpanion.
I have a potential fix for this, but need a TL firmware dump containing a s1 boot update... do you have one
How do I customise the signature on xda premium app?
gregbradley said:
How do I customise the signature on xda premium app?
Click to expand...
Click to collapse
More, settings, signature, choose customize in signature options and cuszomize it. (if that was a real question )
tumult said:
More, settings, signature, choose customize in signature options and cuszomize it. (if that was a real question )
Click to expand...
Click to collapse
No, its my attempt at humour when posting from my phone:silly:
@pikeylfc can you do this for me and let me know what happens.
Download the TL firmware from the all in one thread and flash it. However, instead of holding the volume down button (Normal for flashtool) can you hold BOTH the volume UP and DOWN button.
Tell me what happens in flashtool and on your phone please.
Something else to try
Please download these drivers
http://www.mediafire.com/?ibtd4ta523x5h4f
and point windows to them when it asks for ZEUS drivers
Hard brick
gregbradley said:
Something else to try
Please download these drivers
link
and point windows to them when it asks for ZEUS drivers
Click to expand...
Click to collapse
Hi,
I have a hard brick on TX, and the only way PC recognize connected device was with this driver (Qualcom something). What is this? How can I use it for repair my dead phone?
Thanks,
iron3k said:
Hi,
I have a hard brick on TX, and the only way PC recognize connected device was with this driver (Qualcom something). What is this? How can I use it for repair my dead phone?
Thanks,
Click to expand...
Click to collapse
If your you pc recognises the phone then you should ba able to flash a stock ftf for yout phone in flashtool or repair using pccompanion.
gregbradley said:
If your you pc recognises the phone then you should ba able to flash a stock ftf for yout phone in flashtool or repair using pccompanion.
Click to expand...
Click to collapse
PC recognize the phone as HS-USB diagnostics 9008. Flashtool, SUS and PCC won't recognize the phone connected
iron3k said:
PC recognize the phone as HS-USB diagnostics 9008. Flashtool, SUS and PCC won't recognize the phone connected
Click to expand...
Click to collapse
Have you connected the phone whilst pressing both volume up and down at the same time?
gregbradley said:
Have you connected the phone whilst pressing both volume up and down at the same time?
Click to expand...
Click to collapse
Yes, its same with all combinations
iron3k said:
Yes, its same with all combinations
Click to expand...
Click to collapse
OK, what did you do in order to get the hard brick? What did you flash? And what exactly is your phone model?
gregbradley said:
OK, what did you do in order to get the hard brick? What did you flash? And what exactly is your phone model?
Click to expand...
Click to collapse
That's the problem... I did nothing. TX HK set, fully stock with locked bootloader simply stuck one day, i've pulled tha battery out and thats it. Brick.
iron3k said:
That's the problem... I did nothing. TX HK set, fully stock with locked bootloader simply stuck one day, i've pulled tha battery out and thats it. Brick.
Click to expand...
Click to collapse
well take i tback to the shop then. If you didnt flash anything then its a dodgy handset.
gregbradley said:
well take i tback to the shop then. If you didnt flash anything then its a dodgy handset.
Click to expand...
Click to collapse
I'm from Israel, and phone from Hong Kong... It's a little complicated
I've sent email to Sony HK now, lets see how can they help. Don't really want to stay with $600 brick just because I'm a Sony fan, and bought the phone from the first country it released... Maybe someone from this forum can help? Is there somene from Sony support?
iron3k said:
I'm from Israel, and phone from Hong Kong... It's a little complicated
I've sent email to Sony HK now, lets see how can they help. Don't really want to stay with $600 brick just because I'm a Sony fan, and bought the phone from the first country it released... Maybe someone from this forum can help? Is there somene from Sony support?
Click to expand...
Click to collapse
Send a PM to bin4ry, but i cannot gurentee he will respond.
gregbradley said:
Send a PM to bin4ry, but i cannot gurentee he will respond.
Click to expand...
Click to collapse
Is he a Sony employee? Device is fully stock, I want to get my "one year warranty"....
But meanwhile sony support are not really helping.
iron3k said:
Is he a Sony employee? Device is fully stock, I want to get my "one year warranty"....
But meanwhile sony support are not really helping.
Click to expand...
Click to collapse
Not that i know of.
If you have warrenty then just send it back and say give me a new one.
I would appreciate if anyone could share his knowledge in this matter. GNote doesn't show any signs of life except warming near camera when connected to the charger (to tell the truth it's warm even if it's not connected). Tried restarting, download mode etc. Nothing works. I'm waitng for the JIG I bought today but would like to know if this Omap Flash could save me or is it only for i9000 i9250 and such.
It didn't turn on after failed attempt to flash TWRP kernel using ROM Customizer (which worked for me many times before). Phone didn't went to CWM to flash kernel, simply went straight to GT-N7000 black splash screen and froze. When I tried to restart it, it switched off. And couldn't power on afterwards.
Try if odin detects it even if the screen stays black
Sometimes the fastboot loads which might just be enough to flash
If not you will need to wait for the jig.
friedje said:
Try if odin detects it even if the screen stays black
Sometimes the fastboot loads which might just be enough to flash
If not you will need to wait for the jig.
Click to expand...
Click to collapse
Nope, Odin didn't detect anything. Does the version of Windows could have some impact on this? I'm on Windows 8 x64.
Not really, i supose the same windows machine detected it before ?
The samsung usb drivers are present ? (Kies installed)
friedje said:
Not really, i supose the same windows detected it before ?
Click to expand...
Click to collapse
I don't really remember as last time I used it was to root my sgn about 9 months ago. But I'm pretty sure I wasn't using Windows 8 only Windows 7. But don't remember which version - x86 or x64.
In that case best uninstall and reinstall the latest kies
and then try again to put the phone in download mode
after having started odin. Even if the screen stays black.
It's worth the try.
I suppose you also tried to take out the battery for a few minutes and put it back ?
friedje said:
In that case best uninstall and reinstall the latest kies
and then try again to put the phone in download mode
after having started odin. Even if the screen stays black.
It's worth the try.
I suppose you also tried to take out the battery for a few minutes and put it back ?
Click to expand...
Click to collapse
Yeah. Did all of that (reinstalled kies just now too). But nothing works. That's why I'm curious about this Omap Flash. I don't like the idea of giving my GNote to service center to JTAG it. I still hope that JIG will help, but I also try to prepare for worse case.
Binary version of ROMs? where can we find them? does it work with zip /tar formats?
nokiamodeln91 said:
but without Roms in binary form it's useless...
Click to expand...
Click to collapse
Really? I thought that it might somehow help me to boot in download mode. I must have misunderstood what's written here http://forum.xda-developers.com/showpost.php?p=32508726&postcount=10
Afwasmassi said:
when i connect my phone to the pc it shows up as omap4440 in device manager, then it disconnects and reconnects every 2 seconds..
Click to expand...
Click to collapse
Does it happen to you too? Did you check what extension of rom can be flashed using that tool?
nokiamodeln91 said:
Does it happen to you too? Did you check what extension of rom can be flashed using that tool?
Click to expand...
Click to collapse
Nope, when I connect SGN to my laptop there is nothing new in Device Manager. So I thought that maybe on n7000 it works a bit different or something, that's why I asked.
Omap flash is for flashing phones using a Texas Instruments OMAP Cpu, which is not the case for the Note which is based on Exynos 4210
friedje said:
Omap flash is for flashing phones using a Texas Instruments OMAP Cpu, which is not the case for the Note which is based on Exynos 4210
Click to expand...
Click to collapse
Thx. So at least I can exclude this option. It's getting on my nerves I would understand if the phone bricked during bad flashing but not like this.
Is it possible that my brick happened because I was flashing different kernel while the phone was charging (battery was on 42% while it happened)? But still... it booted a bit afterwards and stopped on GT-n7000 splash screen... I don't understand any of it.
No i often flash while charging.
The kernel on a note has it's own partition
Just like the bootloaders and the recovery do.
While flashing a kernel even if it fails, SBL1 and 2 and Recovery
shouldn't be affected....
There are people wo got out of this by leaving their phone without battery for 24 hours. But I have my doubts myself on that method
friedje said:
No i often flash while charging.
The kernel on a note has it's own partition
Just like the bootloaders and the recovery do.
While flashing a kernel even if it fails, SBL1 and 2 and Recovery
shouldn't be affected....
There are people wo got out of this by leaving their phone without battery for 24 hours. But I have my doubts myself on that method
Click to expand...
Click to collapse
Worth a try. I was charging battery overnight to check if this helps, so I can also leave it alone for a day. Not much use of a brick anyway.
Well if it would change anything, the only explanation is that the powerchip is left in an instable state,not giving enough power to boot. Hence why it's running hot. Normally it is 'set' by it's driver inside the kernel. Maybe after 24 hours it will reset itself. As you say, it's worth a try even if it is a long shot.
friedje said:
Well if it would change anything, the only explanation is that the powerchip is left in an instable state,not giving enough power to boot. Hence why it's running hot. Normally it is 'set' by it's driver inside the kernel. Maybe after 24 hours it will reset itself. As you say, it's worth a try even if it is a long shot.
Click to expand...
Click to collapse
Seems quite logical to me. Thx.
My SGN is still dead even after one day off battery. I got my JIG finally and this doesn't work at all. Odin doesn't detect anything, there is no sound of connection etc. Tested on two laptops.
I have one question though. Is there any possibility to erase my personal data on internal memory before I send my phone to Samsung service center? I don't like the idea that some totally unknown/random people would have access to my stuff.
Only by connecting it to a riffbox, but for that you would need to open the phone and loose your warranty. So I guess you have to believe that they got something better to do then to scrutenize your memory
friedje said:
Only by connecting it to a riffbox, but for that you would need to open the phone and loose your warranty. So I guess you have to believe that they got something better to do then to scrutenize your memory
Click to expand...
Click to collapse
Yeah, but the problem is I don't have papers on my phone. It was bought on an internet auction from a guy who bought it on police auction. Is it possible that JTAG repair would be done instantly without leaving the phone in service shop? Or is it a normal practice to leave a phone for repair?
hi everyone....
my brother updated his xperia tx to jelly bean using flash tool before 3 hours... nothing showed in flashtool or the phone about any problem in flashing
in the last hour the phone started to restart & freeze
it's freezing suddenly & you cannot do anything but taking out the battery
can a factory data reset help?? also we have a backup on PC companion so is it recommended to return it on the phone??
Try repair option in PCC.
Tapatalked from my TX
i have problem using FXP212.
My TX goes in endless rebooting. Tried flashing again but same luck. I m downloading FXP210 to try now.
i did repair but its same thing i don't know what to do with it anymore, i would like help if anyone could give
should i downgrade to ICS and download again from PC companion?
smarda7a said:
i did repair but its same thing i don't know what to do with it anymore, i would like help if anyone could give
should i downgrade to ICS and download again from PC companion?
Click to expand...
Click to collapse
Did you do the repair or did you restore the backup?
Click on the update software option and then when it says you have the latest software click on repair my firmware
gregbradley said:
Did you do the repair or did you restore the backup?
Click on the update software option and then when it says you have the latest software click on repair my firmware
Click to expand...
Click to collapse
yea that what i did really twice already and i even reset the phone fully but im not sure whats wrong with it, it keep rebooting from time to time :/
smarda7a said:
yea that what i did really twice already and i even reset the phone fully but im not sure whats wrong with it, it keep rebooting from time to time :/
Click to expand...
Click to collapse
which one! I asked if you repaired or restored a backup.....
If you repair the phone it should be exactly like a factory shipped phone.
My only other thing to say will be have you got anything in your sd card (Both internal or external) that may be causing this? Any init.d scripts that reduce voltage etc...try deleting the contents of the sdcards and repairing again. (Obviously back anything up you want to keep)
gregbradley said:
which one! I asked if you repaired or restored a backup.....
If you repair the phone it should be exactly like a factory shipped phone.
My only other thing to say will be have you got anything in your sd card (Both internal or external) that may be causing this? Any init.d scripts that reduce voltage etc...try deleting the contents of the sdcards and repairing again. (Obviously back anything up you want to keep)
Click to expand...
Click to collapse
i did repaired twice from PC companion and did once i think from the phone itself, and i don't have Scards its only the phone internal storge..
when i did it first in flash tool it didn't give me any error and then i did repaired it twice from pc companion however whats strange in ICS i never had the reboot problem
and if i remember correctly it only delete the programs etc, but the photos/music etc it never left the phone with both options i did...
so you suggesting to also wipe internal storage and repair to see if it reboot or not? i already have back up for all stuff so it won't hurt to try
thanks alot really for helping and sorry for my bad english ^^;
If you have a backup then try it.
Have you got a bootloop or do you have some reboots? What i mean is, does the phone actually boot up and only reboot occasionally or is it just bootlooping?
gregbradley said:
If you have a backup then try it.
Have you got a bootloop or do you have some reboots? What i mean is, does the phone actually boot up and only reboot occasionally or is it just bootlooping?
Click to expand...
Click to collapse
nah it freeze and reboot when i use it after certain amount of time, sometimes when it reboot it doesn't even give me option to enter my password
the phone start up like there is no lock
I also have this problem with my LT30a. This started the very first time I flashed a Rom ( locked bootloader) that was meant for an LT30p. Sense then I have reverted back to my stock ROM, still have the issue but not so often.
Sent from my LT30a using xda premium
so now i did wipe to internal storage and did repair and such now im facing new problem the phone turn off and and when i try to switch it on...it wont work i have to remove battery and insert it again to make it work, any idea?
How this end up? Anyone has find a solution for this problem? I have xperia t with same problem. The phone mostly freezes and restarts on long listings like fb/twitter feeds, messages...
i have TX same on my device freeze and some times don't wakeup only when battery pulled out
I have an unlocked/rooted Xperia V. A few days ago it suddenly shuts down and bootloop. It's not like the previous SOD issue. I tried to flash official FTF and it still happens - suddenly shuts down, even damage the system partition to bootloop. Nanodroid and Flashtool don't help at all. I assume that maybe it got physical damage on system partition memory? The SONY service say no repair due to the unlock status.
What could I do to save this XV?
phhuang said:
I have an unlocked/rooted Xperia V. A few days ago it suddenly shuts down and bootloop. It's not like the previous SOD issue. I tried to flash official FTF and it still happens - suddenly shuts down, even damage the system partition to bootloop. Nanodroid and Flashtool don't help at all. I assume that maybe it got physical damage on system partition memory? The SONY service say no repair due to the unlock status.
What could I do to save this XV?
Click to expand...
Click to collapse
Relock your bootloader, and then REPAIR via PC Companion
it will help for sure, and if it still has the problem ,then it maybe is a physical problem (which is WAY WAY out of imaginations if you haven't dropped your phone from 6th floor of your apartment )
ebi4321 said:
Relock your bootloader, and then REPAIR via PC Companion
it will help for sure, and if it still has the problem ,then it maybe is a physical problem (which is WAY WAY out of imaginations if you haven't dropped your phone from 6th floor of your apartment )
Click to expand...
Click to collapse
Yes, I just relock it and repair via PC Companion. Then I unlock->fully restore from CWM->same issue happens again! I'm trying not adjust anything related to the kernel. Hope it works!
phhuang said:
Yes, I just relock it and repair via PC Companion. Then I unlock->fully restore from CWM->same issue happens again! I'm trying not adjust anything related to the kernel. Hope it works!
Click to expand...
Click to collapse
the very moment of FULLY restore via recovery, actually you are restoring THE ISSUE as well!
there is no need to be afraid of manipulating kernel, you just have to know what you are doing
hope it helped