Database Develop

My Galaxy Note Is DEAD!!

Hi everybody, I searched everywhere for a solution but no luck
i love my note so much that if i couldnt fix it i think im gonna kill myself.
let me tell you the whole story, maybe you can revive my note again.
im a daily rom flasher, sometimes even 2 or 3 roms a day,
i wanted to flash ics stunner rom so i went into cwm recovery,flashed the zip file and wanted to format data\factory reset, but while the phone was formatting i accidently pressed the power button, the phone was stuck and didn't complete formatting, i took the battery out, put it back in and powered the phone, it was stuck at the bootscreen GTn7000 Galaxy Note.
I got into download mode and flashed a stock rom, but it was the same.
i downloaded and flashed other stock roms but it was stuck at the bootscreen.
then i wanted to flash a stock rom that came with a Pit file, i did everythig correctly, and Odin was stuck at the partition thing, for more than 15 minutes.
i unpluged the phone i pressed the power button, NOTHING!!
i officially bricked my phone which i worked so hard for months to get it.
i tried everything,even the jig thing, i couldn't buy so i had to make one.
maybe i did somethig wrong with the jig or maybe because i didnt solder it or the usb plug im using isnt working.
this may be relevant, i pluged the usb OTG in the phone and in the OTG was a bluetooth peice for computers, the piece had a light, and the light was ON.
Another thing that if i leave the battery in the phone for a while, the camera area in the back gets a little hot, my phone always did that meaning its still alive.
i may have written too much, forgive me but im really desperate.
Thanks in advance.

You probably end up going to Samsung. Pay €200 and get a new motherboard.
Good luck.
Sent from my CM9 GT-N7000 using XDA premium

hav0c said:
You probably end up going to Samsung. Pay €200 and get a new motherboard.
Good luck.
Sent from my CM9 GT-N7000 using XDA premium
Click to expand...
Click to collapse
WOW...
the problem is that i live in a fu**ed up country and we dont have samsung here.
all phones come without warranty and by smuggling from other countries

You mentioned killing yourself. Bro it's just a phone... Hang in there!!!
Sent from my GT-N7000 using Tapatalk 2

First thing donot flash Ics now untill you are craze about it.2nd donot use CWM as much as possible.Read this.
Ok to the problem now.Since you say it gets hot,it might be still alive.Remove the battery and insert it after 10 secs and insert the jig and after few secs press vol up button.Now connect the phone to computer and see if its detected if it does try flashing abyy's kernel.I dont know which kernel for sure.Somebody might help you.People were able to get into DL mode when there screen were not showing anything.

There are situations when your phone is working, but your screen is black.
Let's hope yours is one of those...Try this:
1. Don't flash Abyss. Download a stock GB Rom instead.
2. Charge your phone for a couple of hours. You need your battery for the
following steps.
3. After charging, take out your battery and wait 1 minute
4. Put it back in
5. Boot into Download mode (Volume Down+Home+Power) (you will see only black screen)
6. Count to 10
7. Press Volume Up
8. Count to 10
9. Start your PC Odin
10. Connect your phone to PC
11. Wait untill PC installs the necessary drivers
12. If all goes well, your PC Odin will flash the yellow light with COM info in it
13. Flash your stock GB Rom
If this doesn't work, you'll need to think of the ways of getting your phone JTagged or where to get a new motherboard.

Dude, if you have no way of repairing a bricked phone in your country then stay away from flashing custom ROMs!!!
Sent from my superior GT-N7000 using Tapatalk

Bro as u mentioned already that u flashed stock once...all root and cmw will be wiped... i would prefer going to samsung service center and tell them that u were updating your phone through kies and after the update completed ur phone stopped working... they will fix it for free... and act innocent
Edit::: dint see the other post where u mentioned that there is no samsung center at your place... in that case theres only one thing u can do... buy the motherboard and fix it urself.... sorry that ur beast is dead

izzmohamed said:
Hi everybody, I searched everywhere for a solution but no luck
i love my note so much that if i couldnt fix it i think im gonna kill myself.
let me tell you the whole story, maybe you can revive my note again.
im a daily rom flasher, sometimes even 2 or 3 roms a day,
i wanted to flash ics stunner rom so i went into cwm recovery,flashed the zip file and wanted to format data\factory reset, but while the phone was formatting i accidently pressed the power button, the phone was stuck and didn't complete formatting, i took the battery out, put it back in and powered the phone, it was stuck at the bootscreen GTn7000 Galaxy Note.
I got into download mode and flashed a stock rom, but it was the same.
i downloaded and flashed other stock roms but it was stuck at the bootscreen.
then i wanted to flash a stock rom that came with a Pit file, i did everythig correctly, and Odin was stuck at the partition thing, for more than 15 minutes.
i unpluged the phone i pressed the power button, NOTHING!!
i officially bricked my phone which i worked so hard for months to get it.
i tried everything,even the jig thing, i couldn't buy so i had to make one.
maybe i did somethig wrong with the jig or maybe because i didnt solder it or the usb plug im using isnt working.
this may be relevant, i pluged the usb OTG in the phone and in the OTG was a bluetooth peice for computers, the piece had a light, and the light was ON.
Another thing that if i leave the battery in the phone for a while, the camera area in the back gets a little hot, my phone always did that meaning its still alive.
i may have written too much, forgive me but im really desperate.
Thanks in advance.
Click to expand...
Click to collapse
Your phone is pretty much dead I'm afraid
Why didn't you bother to read stickies first?
It has been known for several weeks now that doing a wipe from CWM in a leaked recovery (I.e all ICS ROMs except cm9 official) will lead to a corrupted emmc drive ,thus a dead phone
And no ,you pressing the power button had nothing to do with it being stuck
The moment you hit wipe from ICS stunner's recovery your phone was dommed.
Anyway what's done is done ,now find an unofficial repair shop and replace your motherboard.
I hope this makes it clear ,and good luck to you.

izzmohamed said:
Hi everybody, I searched everywhere for a solution but no luck
Click to expand...
Click to collapse
Try this : http://forum.xda-developers.com/showthread.php?t=1257434
To force your phone into Download mode !

octavian90 said:
You mentioned killing yourself. Bro it's just a phone... Hang in there!!!
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
if you had gone through what i went through to get the phone, you would probably do the same.Thanks for the reply, any thing would help me right now.

vijai2011 said:
First thing donot flash Ics now untill you are craze about it.2nd donot use CWM as much as possible.Read this.
Ok to the problem now.Since you say it gets hot,it might be still alive.Remove the battery and insert it after 10 secs and insert the jig and after few secs press vol up button.Now connect the phone to computer and see if its detected if it does try flashing abyy's kernel.I dont know which kernel for sure.Somebody might help you.People were able to get into DL mode when there screen were not showing anything.
Click to expand...
Click to collapse
Thanks man, i will definitely try it right away.

mother board
mother board is gone due to kernel harm of ics leak
sorry
this is the fact...

chasmodo said:
There are situations when your phone is working, but your screen is black.
Let's hope yours is one of those...Try this:
1. Don't flash Abyss. Download a stock GB Rom instead.
2. Charge your phone for a couple of hours. You need your battery for the
following steps.
3. After charging, take out your battery and wait 1 minute
4. Put it back in
5. Boot into Download mode (Volume Down+Home+Power) (you will see only black screen)
6. Count to 10
7. Press Volume Up
8. Count to 10
9. Start your PC Odin
10. Connect your phone to PC
11. Wait untill PC installs the necessary drivers
12. If all goes well, your PC Odin will flash the yellow light with COM info in it
13. Flash your stock GB Rom
If this doesn't work, you'll need to think of the ways of getting your phone JTagged or where to get a new motherboard.
Click to expand...
Click to collapse
kvsandeepreddy said:
Bro as u mentioned already that u flashed stock once...all root and cmw will be wiped... i would prefer going to samsung service center and tell them that u were updating your phone through kies and after the update completed ur phone stopped working... they will fix it for free... and act innocent
Edit::: dint see the other post where u mentioned that there is no samsung center at your place... in that case theres only one thing u can do... buy the motherboard and fix it urself.... sorry that ur beast is dead
Click to expand...
Click to collapse
kvsandeepreddy said:
Bro as u mentioned already that u flashed stock once...all root and cmw will be wiped... i would prefer going to samsung service center and tell them that u were updating your phone through kies and after the update completed ur phone stopped working... they will fix it for free... and act innocent
Edit::: dint see the other post where u mentioned that there is no samsung center at your place... in that case theres only one thing u can do... buy the motherboard and fix it urself.... sorry that ur beast is dead
Click to expand...
Click to collapse
MR.change said:
Your phone is pretty much dead I'm afraid
Why didn't you bother to read stickies first?
It has been known for several weeks now that doing a wipe from CWM in a leaked recovery (I.e all ICS ROMs except cm9 official) will lead to a corrupted emmc drive ,thus a dead phone
And no ,you pressing the power button had nothing to do with it being stuck
The moment you hit wipe from ICS stunner's recovery your phone was dommed.
Anyway what's done is done ,now find an unofficial repair shop and replace your motherboard.
I hope this makes it clear ,and good luck to you.
Click to expand...
Click to collapse
pvillasuso said:
Try this : http://forum.xda-developers.com/showthread.php?t=1257434
To force your phone into Download mode !
Click to expand...
Click to collapse
You guys are awesome, im gonna do everything you said and get back with the results, fingers crossed.
I have a friend who's going to Dubai,UAE in a week or so. if nothing worked i'll send the phone with her to repair it at samsung,does anybody know if there's a samsung service center in Dubai and give me the location ?
i cant thank you enough,really appreciate all the help.

firasusman said:
mother board is gone due to kernel harm of ics leak
sorry
this is the fact...
Click to expand...
Click to collapse
OK, how much will it cost me ?
by the way i forgot to mention that before i bricked the note, it had a charging problem, saying voltage too high,charging stopped,and when the phone is turned off the battery icon keeps appearing and disapearing, could it be that the jig is not working because of that??

Try a different USB cable?
Sent from my SPH-D710 using XDA

izzmohamed said:
OK, how much will it cost me ?
by the way i forgot to mention that before i bricked the note, it had a charging problem, saying voltage too high,charging stopped,and when the phone is turned off the battery icon keeps appearing and disapearing, could it be that the jig is not working because of that??
Click to expand...
Click to collapse
You're not going to like this: I had to send my phone back to Samsung to get that fixed. Basically the charging port was shorting out, happens when stuff gets inside it (dirt, moisture, etc, from what I read). You could try cleaning it, but for me the port didn't break, it just acted like it was charging when there was nothing plugged in. So the JIG will work if it's supposed to.

jeffrey567 said:
Try a different USB cable?
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
I did, still the same.
jayshah said:
You're not going to like this: I had to send my phone back to Samsung to get that fixed. Basically the charging port was shorting out, happens when stuff gets inside it (dirt, moisture, etc, from what I read). You could try cleaning it, but for me the port didn't break, it just acted like it was charging when there was nothing plugged in. So the JIG will work if it's supposed to.
Click to expand...
Click to collapse
Hmmm,i'll try cleaning it.I had the same situation, so the jig should work fine despite this problem ?

jayshah said:
You're not going to like this: I had to send my phone back to Samsung to get that fixed. Basically the charging port was shorting out, happens when stuff gets inside it (dirt, moisture, etc, from what I read). You could try cleaning it, but for me the port didn't break, it just acted like it was charging when there was nothing plugged in. So the JIG will work if it's supposed to.
Click to expand...
Click to collapse
Just out of curiosity: Are you in the US and had to send your international Note somewhere? I am wondering how one can get a support for an International Note if you're in the US.
I don't mind sending it to another country, but which Samsung center will accept it?

lanwarrior said:
Just out of curiosity: Are you in the US and had to send your international Note somewhere? I am wondering how one can get a support for an International Note if you're in the US.
I don't mind sending it to another country, but which Samsung center will accept it?
Click to expand...
Click to collapse
I am wondering the same thing, mine got bricked about a week ago and I don't really know what to do with it

[Q] Please help me, is my phone bricked?

I'm a complete noob in dire need of help. I wanted to root my phone, and read the 3 procedures mentioned in the sticky thread. The 2nd one (nvflash) seemed very well explained and was sure to work with 2.3.4 so I decided to use that. As I was in my friend's house I used his pc and installed the drivers while my phone was connected in apx mode. Then I double clicked the "install internal xp" batch file which resulted in a black window with some texts, but seeing this my friend freaked out and closed the window before the process was finished. I told him he shouldn't have done that. I then disconnected the phone and switched it on. It seemed to switch on properly. So I then switched it off again and pressed and held the power and vol down switches to see if I got cwm. This showed LG screen for a few seconds and then the screen went off.
Now whatever I try to do I can only see the LG screen for a few seconds and then the screens goes off. No power on, no recovery, no nothing. And I can only attempt to even power on once, after the screen goes off I must remove the battery before the power button does anything again.
I tried to freshly nvflashing the recovery many times, but it made no difference. Does this mean my phone is bricked? Please tell me how I can solve this as I'm really worried.

NVFlashing the recovery again *should* have worked. So we first need to make sure you're trying to start CWM the correct way.
1) Unplug phone
2) Remove battery for 10 seconds.
3) Insert battery
4) Hold volume-down, do not let go, keep pressing it.
5) Press power button, keep it pressed.
If/when you get the second LG-logo, bluish halo, you can release both buttons, not before.

Nope, that was exactly what I was doing to access the recovery. I tried it again just now and it didn't work.
It just displayed the regular LG logo and then the screen went off. I'm not sure the phone completely shuts down 'cause if I keep it like that it gets quite hot and I can't use the power button again to try to power up. Only removing and re-inserting the battery gives me another attempt.
Is there any chance this is a hardware issue?

Hardly any chance this is hardware related if it was working before the first NVFlash.
Good, next step will be to NVFlash a complete stock ROM. You will unfortunately lose any data you might have on it, but that's the price to pay.
Go here, follow the instructions precisely, skip installation of apx-driver. Report back.
http://www.modaco.com/topic/335474-25-mar-nvflash-stock-rom-release-v10b-dated-1300166062-15032011/

Ok, so I just download the 200mb file, connect in apx mode and double click flash.bat, right? And will this rom work regardless of country/region? I'm from India and was running stock 2.3.4 with v20* (can't remember the letter. God, I hate myself).

sean8000 said:
Ok, so I just download the 200mb file, connect in apx mode and double click flash.bat, right? And will this rom work regardless of country/region? I'm from India and was running stock 2.3.4 with v20* (can't remember the letter. God, I hate myself).
Click to expand...
Click to collapse
It works, yes, but is the original Froyo. This is just a way to get the phone up and running again.
Later you have a few choices. Either install CWM, then install you ROM of choice, or upgrade it to the latest for your region by using the LG Update tool.
EDIT. Oh, and btw, it is better to open a command-window and type the flash.bat command. If there are any errors you will still have them on-screen.

Thank you for all the help and support. I didn't get a chance to flash the rom till now (being on a vacation without a smartphone sucks). But I'll try it asap and report back.

So, how did it go?

TrymHansen said:
So, how did it go?
Click to expand...
Click to collapse
I haven't flashed it yet. I've decided to do it after I return home. I'm at my friend's house for 2 more days.

Ok, bad news. I flashed the stock rom you linked. The process went pretty smoothly. After the window got closed and the lg logo on the phone was visible 2 times, I unplugged it and installed the battery. But switching it on wasn't fruitful. It just displayed the LG logo for a couple of seconds and then the screen went off (just like before, only faster). I tried repeating the whole process, even tried to nvflash cwm once again, but nothing happened.
So is it a hardware issue? My phone is no longer in warranty period, so a hardware problem would be really bad...

So is it a hardware issue?
Click to expand...
Click to collapse
I don't know.
What would be helpful is to get a copy of the output you get when you NVFlash, it's simply the only way to verify that the flash process went ok. If you have an aborted flash it of course won't work, and may display the behaviour you describe.
EDIT: Btw, early on there were some ROMs which refused to boot properly unless the baseband was of an early variety as well.
If you feel confident the NVFlash has been successfull, smartflash an old baseband as well, see if it boots then.

Its hardly a hardware problem. As you dont have the warranty anymore, and the bootloader is probably corrupted, i would recommend a Jtag service.
Please, dont be afraid of hitting thanks

gabriel2anjos said:
Its hardly a hardware problem. As you dont have the warranty anymore, and the bootloader is probably corrupted, i would recommend a Jtag service.
Please, dont be afraid of hitting thanks
Click to expand...
Click to collapse
Now what's this "Jtag service"? (edit- I googled it and it seems to be a method of un-bricking stuff with specialized hardware or something, but I'm not sure I can have that done where I live)
Is there any way to fix the bootloader by myself?
@Trym- So, I should download a v10 baseband and flash it with this "smartflash" tool, right?

sean8000 said:
@Trym- So, I should download a v10 baseband and flash it with this "smartflash" tool, right?
Click to expand...
Click to collapse
Yeah, as a last-ditch effort. I haven't the slightest hope it'll help, but it can't hurt to try.

TrymHansen said:
Yeah, as a last-ditch effort. I haven't the slightest hope it'll help, but it can't hurt to try.
Click to expand...
Click to collapse
Ok, I'll try that when I have the time.
So do you know anything about this corrupted bootloader thing? Does this mean my phone's hard bricked?

sean8000 said:
So do you know anything about this corrupted bootloader thing? Does this mean my phone's hard bricked?
Click to expand...
Click to collapse
If it is you're only the second person in this forum to ever brick his phone. Anything's possible I guess. Some flash cells may have been damaged the first time the power was yanked. But then we should presumably get some verification errors during flashing.
Anyway, I'm at my wits end, and I really do hope you get it up and running, but I don't have anything more to contribute. Good luck.

Corrupted bootloader means that your cellphone simply don't know what to do when you hit the power button, due to the damage. As the cell phone can't turn, the pc can't recognize it. If your cell phone were a samsung, you could try to use a jig to have acesso to the download mode. But I don't know if it would work for a LG. You could try anyway.
And if you live at big city, usually it's common to have some jtag services.
Please, dont be afraid of hitting thanks
Please, dont be afraid of hitting thanks

Ok, so I took the phone to the service center today. The guys there said its battery terminals are messed up. They said replacement terminals are not easily available, but they'll try to find some. And of course I'll have to pay for it. I guess it's still better than using the phone as a paperweight.
What do you guys think?

Good luck I managed to mess up my phone like you too. I'm from India. But the difference was that I was covered by warranty. I managed to get a bunch of hardware replaced and was up and running again.

Giga Bricked Note.

Today, my Note got extremely bricked, that I could not believe a phone like that could get so easily blown up.
I get this "Firmware update encountered an issue. Please select recovery in Kies and try again." message while it's rebooting every second.
I got this by making a huge mistake, using the re-partition option with the included .pit file, thinking it would factory-wipe the phone before downgrading... well, it didn't. Now, I can't barely access Download Mode or recovery because of, what I assume, low battery. It's charging now and it doesn't look like it. It reboots itself every 5 sec while it's plugged in. Before that, I used the JB leak and began to hate it because of it's damn instability. I wanted the stable, stock, ICS that came with it. I never had any problems like that on Xperia S.
Hell, even Odin can't ****ing save it because of the reboot-problem. I begin to think that, for the first time ever, I have to send this pile of **** back to Samsung and get a new one by saying, Kies ****ed up my phone.
Is there a solution that DOES NOT INVOLVE A DAMN USB JIG for this phone?

If you got the error in kies you could have followed the kies emergency firmware recovery option. Reflashing with a pit file is only for when you have triggered the emmc brick bug is my understanding. Look for the thread with the unbricking guides and hope for best. If not then it looks like service centre...........
Sent from my GT-N7000 using xda app-developers app

LinixAndroid said:
.. I could not believe a phone like that could get so easily blown up.
I got this by making a huge mistake, using the re-partition option with the included .pit file...
Click to expand...
Click to collapse
Did you really read and combine this two sentences? Sometimes people should read the warnings (here about the reasons why NOT to use a pit) and follow them.
But first of all you should recharge the battery outside your device. When you're sure it's "reloaded" try download mode again and install a prerooted Stock Rom (like GB LC1 3-part) and check if you can install and after reboot into a stable device again.
Maybe it isn't so bad forever only for a few hours.

ThaiDai said:
Did you really read and combine this two sentences? Sometimes people should read the warnings (here about the reasons why NOT to use a pit) and follow them.
But first of all you should recharge the battery outside your device. When you're sure it's "reloaded" try download mode again and install a prerooted Stock Rom (like GB LC1 3-part) and check if you can install and after reboot into a stable device again.
Maybe it isn't so bad forever only for a few hours.
Click to expand...
Click to collapse
Wait, I have to charge it outside the phone? What kind of charger only charges the battery outside the phone?

just find someone with the same phone in your neighbourhood and charge in another phone...that's the easiest way..

I have flashed my note multiple times now and it never crossed my mind to use a .Pit file..
By the way, have you thought of leaving the battery out for a few minutes? I got that Firmware issue message before because the power went out while I was flashing my phone from my PC.. Then I just left it out for a few minutes and was able to boot back into dowload mode again

After the emmc brickbug:
The custom pit file may work but trust me after a few moths you going crazy with your phone... it freezes randomly on every rom and wont charge randomly. When you wake up.. phone frozen and battery is on 0% ... i lived 2 weeks with this then i gave it to samsung and they changed the mainboard for free now im happy

Help! Hard Bricked Note

After being careful on flashing ROM based on our valued friends instruction, my Note got bricked somehow.
Rom installed: Slim Beans 4.3 build 2 with Raw kernel R4.
Everything works fine and smooth until on time, when i was using the phone with 19% batt while charging the phone hang. It was not responding at all so i pressed and hold the power button until it power off. Then i removed the charge and change the battery from a spare fully charged batt. Now the phone won't turn on.
Note won't go to recovery nor download mode. Does not show that its charging as no charging icon show up. I have an external battery charge though so i'm sure that my spare battery is fully charged. I tried to blindly perform the download mode and connect to PC with Odin and its not recognized. Even tried the one-click unbrick but would not recognize the phone. Any idea what else i can try beside using USB Jig or JTAG?
I’ve read about sudden death issues or reserve battery being depleted but non of the solution worked.
Anything else i might have failed to try? Any advice is greatly appreciated.

No GT-N7000 screen also?

nokiamodeln91 said:
No GT-N7000 screen also?
Click to expand...
Click to collapse
Yes, nothing at all. it just died on me all of the sudden. I've never experienced even boot loop since flashing almost all sorts of ROM & kernel since CM 9 days, even jumping between TW/ASOP/CM/Miui roms. I've always been very careful in following the instructions reading since rooting my n7000.
now this happened. :crying:
Edit: And now i've read that they are about to release a Kitkat Omni ROM..

If there is no response from the phone at all.. then there could be board issues.. Try with a jig if possible. may be that can force the phone into download mode.. else repair center..

nokiamodeln91 said:
If there is no response from the phone at all.. then there could be board issues.. Try with a jig if possible. may be that can force the phone into download mode.. else repair center..
Click to expand...
Click to collapse
Yeah, that's my last resort. No choice then but have the board replaced.
Kitkat Omni ROM out!! I guess my flashing days are over.... for now... :crying:

Tonyboy09 said:
Yeah, that's my last resort. No choice then but have the board replaced.
Kitkat Omni ROM out!! I guess my flashing days are over.... for now... :crying:
Click to expand...
Click to collapse
Hmm.. I was looking to flash the same kernel with the new tech. Maybe look for help from the developer? On his topic was a guy who had the similar situation.
Looking to hear more from you on this.
ps. flashed the kernel once (r4) and the backlights were turning on and off (in settings were turned off), so i figured the kernel isn't supported. Slim Rc2

Well, i finally got a usb jig today and tried it on my n7000, it didnt work. Still no download mode for me, nothing. As i suspect this is already super bricked due to damaged mainboard.

The screen won't light up at all? When you are in a dark room, the screen isn't completely black, and that is the sign you need. It could be messed up partitions. Have you used pit file before?

drulo222 said:
The screen won't light up at all? When you are in a dark room, the screen isn't completely black, and that is the sign you need. It could be messed up partitions. Have you used pit file before?
Click to expand...
Click to collapse
Yes, won't light up at all not even in a dark room. I have not tried using a pit file before but would love to try it. The problem is i can't get it to download mode, not even with a jig. Tried connecting PC with Odin running thinking that i can do it blindly even without anything showing on the screen. The problem is that Odin can't recognize it.

Having trawled the net for a solution to this, i am interested to see if you have any luck with this, as my note did exactly the same yesterday, although mine is stock.
Completely gutted:crying:

Samsung Galaxy S3 mini is completely dead

Yesterday evening my phone was on the charger then it suddenly stopped and it is completely dead. It isn't showing any signs of life ever since, even if I charge it. It doesn't even show offline charging and I can't send it to Samsung as it's rooted so my warranty it VOID. It seems to me that it has Sudden Death Syndrome because it has been recently been switching off and now it's completely dead. What should I do? I'm pretty much screwed!

KoolKid98189 said:
Yesterday evening my phone was on the charger then it suddenly stopped and it is completely dead. It isn't showing any signs of life ever since, even if I charge it. It doesn't even show offline charging and I can't send it to Samsung as it's rooted so my warranty it VOID. It seems to me that it has Sudden Death Syndrome because it has been recently been switching off and now it's completely dead. What should I do? I'm pretty much screwed!
Click to expand...
Click to collapse
Can you enter download mode?

robintjeuuu said:
Can you enter download mode?
Click to expand...
Click to collapse
Well... I managed to just get it into offline charging. When I boot it up in normal mode it shows Samsung Galaxy S3 mini then after a few seconds the bottom lights flash for half a second and shut down. When I try to boot to recovery, model name then shut down. Yes it can just about make it into download mode.

KoolKid98189 said:
Well... I managed to just get it into offline charging. When I boot it up in normal mode it shows Samsung Galaxy S3 mini then after a few seconds the bottom lights flash for half a second and shut down. When I try to boot to recovery, model name then shut down. Yes it can just about make it into download mode.
Click to expand...
Click to collapse
If you get into download mode, go to sammobile en download the firmware for your phone and flash it with odin. if that worked, open stock recovery and do a fatory reset to make sure everything is back to stock... Then you can just hope it won't happen again.

robintjeuuu said:
If you get into download mode, go to sammobile en download the firmware for your phone and flash it with odin. if that worked, open stock recovery and do a fatory reset to make sure everything is back to stock... Then you can just hope it won't happen again.
Click to expand...
Click to collapse
I tried flashing stock recovery and ROM through Odin, it said pass but nothing actually seemed to fix and it still has the same problem that it shuts down after showing logo and when I boot to recovery it just shows TeamWin for a few seconds and shuts down so looks like I'm screwed and I have to use my BlackBerry :'(

KoolKid98189 said:
I tried flashing stock recovery and ROM through Odin, it said pass but nothing actually seemed to fix and it still has the same problem that it shuts down after showing logo and when I boot to recovery it just shows TeamWin for a few seconds and shuts down so looks like I'm screwed and I have to use my BlackBerry :'(
Click to expand...
Click to collapse
Ok, can't help you, maybe search this forum for unbrick device. I know there are fixes that can be used with some bricks.

robintjeuuu said:
Ok, can't help you, maybe search this forum for unbrick device. I know there are fixes that can be used with some bricks.
Click to expand...
Click to collapse
And I don't think Samsung will repair it as my warranty is void and I doubt if my parents would get me a new phone as this phone is only 3 months as well! And I have seen an unbrick thread and I tried it and it didn't work :'(

Well, I know how you feel. My charging port died once after I changed rom. Samsung asked me 200 for repair. Maybe you can give it a try and send him in... You never know Samsung loves you more than me..
Sent from my GT-I8190 using Tapatalk

robintjeuuu said:
Well, I know how you feel. My charging port died once after I changed rom. Samsung asked me 200 for repair. Maybe you can give it a try and send him in... You never know Samsung loves you more than me..
Sent from my GT-I8190 using Tapatalk
Click to expand...
Click to collapse
My dad took it to the service centre and they said they can't fix it as it's rooted so I'm screwed :'(

sunny296 said:
thanks,this index help me out very much.
Click to expand...
Click to collapse
What do you mean?

Zamoro1 said:
it is not samsung galaxy problem. it was your problem. you must close your downloading and other working while it is on charging.
Click to expand...
Click to collapse
It wasn't downloading anything?

Don't worry everyone I sent it to a repair shop (not Samsung) so I hope they manage to fix it.

Mine also dead
KoolKid98189 said:
Don't worry everyone I sent it to a repair shop (not Samsung) so I hope they manage to fix it.
Click to expand...
Click to collapse
Have you any news about the problem in your phone?
Mine (i8190 with one of the mclaws roms from previous week) also appeared in the morning shut down and there's no way of starting it. It does not even vibrate when power button pressed, as if the battery was completely empty.
Tried with another battery and checked that the original one had charge, but no luck. It does not start (normal, download or recovery, makes no difference).
Any ideas?

PelosBi said:
Have you any news about the problem in your phone?
Mine (i8190 with one of the mclaws roms from previous week) also appeared in the morning shut down and there's no way of starting it. It does not even vibrate when power button pressed, as if the battery was completely empty.
Tried with another battery and checked that the original one had charge, but no luck. It does not start (normal, download or recovery, makes no difference).
Any ideas?
Click to expand...
Click to collapse
Well mine was dead for a day then I plugged it into the charger (this was after a day and I left it on charge all night and it wouldn't start) and I held the power button for 10 seconds while it was on the charger it showed offline charging so I let it charge for a bit and then I powered it on and it seemed to be bricked so I sent it to a phone repair shop (not Samsung as my warranty is void). If it doesn't show any signs of life then it's bricked. If it comes to life then it is also probably bricked. I tried flashing many recoveries, ROMs, kernels and params and nothing happened.

In the S III Mini General forum there are topics about getting your phone back to stock so that it is covered by warranty.

james.faction said:
In the S III Mini General forum there are topics about getting your phone back to stock so that it is covered by warranty.
Click to expand...
Click to collapse
I tried to flash stock ROM and recovery but nothing actually worked!

1. Did you follow the instructions in detail?
2. What does "nothing actually worked!!" mean??
Maybe you need to work out what is the problem and why it is failing. Then you will be able to figure out if it is actually fixable, and if so how to fix it. "Trying everything" doesn't really work unless you make an effort to analyse the results you get every time you try something.
You could try posting in one of the threads about taking the phone back to stock. The people who posted them might be able to help you, they are more experienced at this sort of thing.

james.faction said:
1. Did you follow the instructions in detail?
2. What does "nothing actually worked!!" mean??
Maybe you need to work out what is the problem and why it is failing. Then you will be able to figure out if it is actually fixable, and if so how to fix it. "Trying everything" doesn't really work unless you make an effort to analyse the results you get every time you try something.
You could try posting in one of the threads about taking the phone back to stock. The people who posted them might be able to help you, they are more experienced at this sort of thing.
Click to expand...
Click to collapse
I tried those solutions and they didn't work.

Kid, can you read?
What did you try? What was the result?
"didn't work" isn't a result, it's you giving up. Without even trying to find out why it didn't work.

james.faction said:
Kid, can you read?
What did you try? What was the result?
"didn't work" isn't a result, it's you giving up. Without even trying to find out why it didn't work.
Click to expand...
Click to collapse
I read all instructions, and when I flashed it via Odin, nothing actually changed even with the params!