[Q] Copy Paste Error - Galaxy S Advance I9070 Q&A, Help & Troubleshooting

hello!
i m using "HarshJelly v1.1" n "Cocore 6.8" kernel, whenever i connect my phone in mass storage mode n try to copy any file from PC to phone, the copying process just gets stuck! nothing works then n i ve to unplug the USB cable directly!
until i was on CM10.1, everything was working fine, but then i flashed with "LightJBv1.2" n got this error! It works fine when i connect in MTP mode, but not in mass storage mode PLease someone help me, its annoying!
I'm new to XDA forum n so too android modding, correct me if i m wrong in any section
Thank U!

Try wiping data through recovery.
Looked at it theres no problem in the rom.
Still not working try in another pc
Or re install drivers on pc.
Sent from my GT-I9070 using xda app-developers app

shaikhsumair99 said:
Try wiping data through recovery.
Looked at it theres no problem in the rom.
Still not working try in another pc
Or re install drivers on pc.
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
thanx for the reply! +1
i wipe data during every installation, would b this caused coz of kernel??
n tried copying by inserting memory card in another phone n it works!

aghavamol said:
thanx for the reply! +1
i wipe data during every installation, would b this caused coz of kernel??
n tried copying by inserting memory card in another phone n it works!
Click to expand...
Click to collapse
It was a bug on JB. Use it as MTP. Maybe on some firmware it works ok, but some other users already complained about that. So your are not alone with that problem.

shut_down said:
It was a bug on JB. Use it as MTP. Maybe on some firmware it works ok, but some other users already complained about that. So your are not alone with that problem.
Click to expand...
Click to collapse
ohh kk thanx! +1! i thought i was the only one facing it
in CM10.1 i used this script in terminal emulator to enable mass storage mode :
su
setprop persist.sys.usb.config mass_storage
reboot
it worked great in that, then i flashed with lightJB n this problem occured! would b that script responsible for that?

aghavamol said:
ohh kk thanx! +1! i thought i was the only one facing it
in CM10.1 i used this script in terminal emulator to enable mass storage mode :
su
setprop persist.sys.usb.config mass_storage
reboot
it worked great in that, then i flashed with lightJB n this problem occured! would b that script responsible for that?
Click to expand...
Click to collapse
Not sure what is causing that, and what need to be done to fix it. I am using MTP. Even on my PC at work I didn't install any drivers (win7 used find driver) and it worked fine.

shut_down said:
Even on my PC at work I didn't install any drivers (win7 used find driver) and it worked fine.
Click to expand...
Click to collapse
which worked fine u mean??? MTP or mass storage mode??

aghavamol said:
which worked fine u mean??? MTP or mass storage mode??
Click to expand...
Click to collapse
MTP, autoupdate find driver and I could use it.

Related

[Q] Cant use as mass storage?

I'm on zeus v3 I installed the latest lag mobile driver but still can't used my phone as mass storage or to transfer files from computer to my OB and vis a vis.
In order for it to work; USB debugging should be unchecked. first go to settings and uncheck it and try again.
If that doesn't work either go to settings and there is menu lik "SD card and..." under it check USB storage then try again.
When I insert it in the usb port it said's that the usb is not recognized even though I installed the lastes lg mobile.
Pondera said:
In order for it to work; USB debugging should be unchecked. first go to settings and uncheck it and try again.
If that doesn't work either go to settings and there is menu lik "SD card and..." under it check USB storage then try again.
Click to expand...
Click to collapse
Still not working bud.
denclaud said:
When I insert it in the usb port it said's that the usb is not recognized even though I installed the lastes lg mobile.
Click to expand...
Click to collapse
Sometimes I got that message to, but it fixed when I replugged the usb, or change the usb port.
Try plug it on other usb port. If it still failed, try with other PC (install driver first of course).
If it also failed, try using other cable.
Sent from my LG-P970 using Tapatalk
Even I was facing similar problem yesterday after I installed Marvel's Custom Rom & I thought its a bug, but I googled and found a solution. 'Switching off the phone, removing the battery and inserting it again and turning it on' : This solved my problem!
denclaud said:
Still not working bud.
Click to expand...
Click to collapse
Ok. And there is always "not installing the drivers" issue. Try to install latest L mobile drivers. I believe the version was 3.6
Pondera said:
Ok. And there is always "not installing the drivers" issue. Try to install latest L mobile drivers. I believe the version was 3.6
Click to expand...
Click to collapse
Yes I already have the latest drivers but still...
Do you think its related to the cable ?
Try RomManager. Download it, install,open, find fix permissions, run it, reboot and everything should be fine again ;-) dont just run fix permissions from cwm, since it doesnt work. Use RomManager.
Sent from my LG-P970 using Tapatalk

Cannot Mount USB storage.

I cant mount usb storage on my computer.i am using gdx v28b and stock kernel.
It mounts on my friends comp. dunno how?? i hav installed all the drivers for the x8.
:crying:
Please help
have you considered the possibility that your pc's USB port may be damaged?
If u are using swapper turn it off then mount USB Storage
Also check safe remount and safe unmount in swapper2 settings
Is it important how did i send this?
souljaboy11792 said:
have you considered the possibility that your pc's USB port may be damaged?
Click to expand...
Click to collapse
All other devices work perfectly.Even my friend's x8 gets mounted.
Sent from my X8 using Tapatalk 2
faraz_fireboy said:
If u are using swapper turn it off then mount USB Storage
Also check safe remount and safe unmount in swapper2 settings
Is it important how did i send this?
Click to expand...
Click to collapse
I am on stock kernel.so I can't use swap
Sent from my X8 using Tapatalk 2
athulele said:
I am on stock kernel.so I can't use swap
Sent from my X8 using Tapatalk 2
Click to expand...
Click to collapse
So are u using any app that consumes SD?
If not try a full wipe...but first backup
Is it important how did i send this?
faraz_fireboy said:
So are u using any app that consumes SD?
If not try a full wipe...but first backup
Is it important how did i send this?
Click to expand...
Click to collapse
It happens on every rom.......tried full wipe mamy times
Sent from my X8 using Tapatalk 2
Problem with your PC maybe.
Have you tried installing PC companion and then mounting your phone ?
athulele said:
I cant mount usb storage on my computer.i am using gdx v28b and stock kernel.
It mounts on my friends comp. dunno how?? i hav installed all the drivers for the x8.
:crying:
Please help
Click to expand...
Click to collapse
Try restoring with Companion and making sure that the USB storage works well, then install any ROM.
Meanwhile you can transfer files with WiFi File Explorer, is very good
maybe you can uninstall the program dude!
re install PCC
install all drivers
restart your computer
check your phone, cable, charger if any little damage
try with blackberry cable or something that can plug with your x8
Same thing
athulele said:
I cant mount usb storage on my computer.i am using gdx v28b and stock kernel.
It mounts on my friends comp. dunno how?? i hav installed all the drivers for the x8.
:crying:
Please help
Click to expand...
Click to collapse
I had the same problem, well couldnt 'see' the Turn On USB Connection button, and there was no way to scroll down to access it. Happened on GingerDx v28b Alfs v08a kernel, did everything, full wipe etc. ROM was great though
Have tried everything.....it just doesn't mount
And I use software data cable.....that is gr8!!
Sent from my X8 using Tapatalk 2
LexMadden said:
I had the same problem, well couldnt 'see' the Turn On USB Connection button, and there was no way to scroll down to access it. Happened on GingerDx v28b Alfs v08a kernel, did everything, full wipe etc. ROM was great though
Click to expand...
Click to collapse
the problem is between your PC and your chair. it was said many times in the GDX thread that you have to TAP THE BIG ANDROID ICON to mount the USB storage
fifo171 said:
the problem is between your PC and your chair. it was said many times in the GDX thread that you have to TAP THE BIG ANDROID ICON to mount the USB storage
Click to expand...
Click to collapse
Hey man,I know that.............
Sent from my X8 using Tapatalk 2

Help needed usb not detecting

Hi
I updated my galaxy note last night to offical ics update for india now i can not connect my phone in usb mode it only showing charging i tried factory reset every option no result *#7284# code showing invalide mmi etc what to do so fedup
myankt2t said:
Hi
I updated my galaxy note last night to offical ics update for india now i can not connect my phone in usb mode it only showing charging i tried factory reset every option no result *#7284# code showing invalide mmi etc what to do so fedup
Click to expand...
Click to collapse
Download kies reinstall drivers
Sent from my GT-N7000 using xda app-developers app
wrong section should be in q&a
try forcing detection by going to settings, storage, mount usb. or likewise.
Kies troubleshooting is better.
Also make sure you have usb debugging off in development options
Sent from my GT-N7000 using Tapatalk 2
baz77 said:
wrong section should be in q&a
try forcing detection by going to settings, storage, mount usb. or likewise.
Kies troubleshooting is better.
Also make sure you have usb debugging off in development options
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Sorry if its in wrong section
I tried every option you mentioned no luck
My screen some time shows fluctuation too i bought this phone yesterday i previously used galaxy s
And random reboot and random discharging
ok try to instal gb rom, official, see dr ketans thread in sticky section development, and check if it works there
edit WAIT! read comment below
Known issue with 4.0.4 ICS http://forum.xda-developers.com/showthread.php?t=1828016
I haven't been able to resolve it by reinstalling kies. Before I could plug my note in and the phone card and external card would show up in my computer. Now only camera mode works. MTP no longer works.
I have to manually mount the usb storage to access ext sd card.
Try this
Setting -.security.-device administration - remove if any checked and try to connect.
Sent from my GT-N7000 using xda premium
dr.ketan said:
Try this
Setting -.security.-device administration - remove if any checked and try to connect.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
No luck bro.
thing i have done so far
Flashed stock rom via odin
re installed Kies
Re installed usb driver:crying:
factory reset
inurb said:
Known issue with 4.0.4 ICS http://forum.xda-developers.com/showthread.php?t=1828016
I haven't been able to resolve it by reinstalling kies. Before I could plug my note in and the phone card and external card would show up in my computer. Now only camera mode works. MTP no longer works.
I have to manually mount the usb storage to access ext sd card.
Click to expand...
Click to collapse
Manually mount how to do this ?
myankt2t said:
Manually mount how to do this ?
Click to expand...
Click to collapse
Go to settings > More > USB Utilities
If you can't do that then clean your micro usb port on your note.
inurb said:
Go to settings > More > USB Utilities
If you can't do that then clean your micro usb port on your note.
Click to expand...
Click to collapse
7cdcsis the error name tried samsung ADB mode still not working
my other android working on my system its galaxy pro :|
clean micro usb port from a brush or some thing ?
Please help me its been 3 days countless effort no result
dont wipe, (factory reset) on stock ics !
dont you want to root ?
are you using windows ?
rraaka said:
dont wipe, (factory reset) on stock ics !
dont you want to root ?
are you using windows ?
Click to expand...
Click to collapse
i didn't done hard rest it's not working :|
i m on window 7 :|
i also rooted tried custom rom still not working tried diff pcs and cables
If you are using windows7 just go to control panel then device manager look for those samsung drivers esp with yellow mark, right click then properties, look for update driver-then search automatically. Hope this will help
Sent from my GT-N7000 using xda app-developers app
Install Kies again ( latest ver) and uninstall leaving the drivers intact, re boot pc, try
LoVeRice said:
If you are using windows7 just go to control panel then device manager look for those samsung drivers esp with yellow mark, right click then properties, look for update driver-then search automatically. Hope this will help
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
It showing 7CDCS device and not updating
rraaka said:
Install Kies again ( latest ver) and uninstall leaving the drivers intact, re boot pc, try
Click to expand...
Click to collapse
i have done that no luck
myankt2t said:
7cdcsis the error name tried samsung ADB mode still not working
my other android working on my system its galaxy pro :|
clean micro usb port from a brush or some thing ?
Click to expand...
Click to collapse
compressed air or a qtip dipped in rubbing alcohol.

has anyone solved a usb brick before ?

Hello, so as the title say i have a usb brick, wich means my phone can't get detected by pc ( tested on win7 / win8 / xubuntu ) with different drivers and different cable.
i looked over the form for the problem but no one seems to found a solution, i'm posting this to check if someone has resolved it before ?
my main problem is that i can't get odin to detect the phone, i can't flash any stock now !! :/
anyway please give it a taught, changing Drivers , desinstall and reinstalling drivers doesn't work and i don't have any warranty on the phone.
thanks in advance for your help
Cominox said:
Hello, so as the title say i have a usb brick, wich means my phone can't get detected by pc ( tested on win7 / win8 / xubuntu ) with different drivers and different cable.
i looked over the form for the problem but no one seems to found a solution, i'm posting this to check if someone has resolved it before ?
my main problem is that i can't get odin to detect the phone, i can't flash any stock now !! :/
anyway please give it a taught, changing Drivers , desinstall and reinstalling drivers doesn't work and i don't have any warranty on the phone.
thanks in advance for your help
Click to expand...
Click to collapse
Have you tried enabling usb debugging on the device?
I take it that it does charge right?
Sent from my GT-N7000 using xda app-developers app
Anthropostar said:
Have you tried enabling usb debugging on the device?
I take it that it does charge right?
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Yes i tried with usb debugging on/off and nothing, the cables charge the phone but doesn't get it to be detected
Not even detected in recovery? Have you tried recovery - mounts & storage - mount USB storage connected to PC?
Could be possible that the use port is broken or you need to change rom to get it working.
What rom are you on right now? If you are rooted, then use mobile odin to flash any stock rom. It also goes without saying that you will need a sd card in this case to transfer files on to the phone.
nokiamodeln91 said:
Not even detected in recovery? Have you tried recovery - mounts & storage - mount USB storage connected to PC?
Could be possible that the use port is broken or you need to change rom to get it working.
What rom are you on right now? If you are rooted, then use mobile odin to flash any stock rom. It also goes without saying that you will need a sd card in this case to transfer files on to the phone.
Click to expand...
Click to collapse
i was using angry ROM v3.2 and now i tried Xperia Note, same problem and thanks for the advice about mobile odin that can be usefull when needed but i just need to figure out the solution for this brick the phone isn't detected on any pc that i used not even on CWM mount and storage
Try another wire?
Tapatalking on my n7000

I9070 can't connect via USB after flashing rom:I9070XXLQG_I9070PRTLQ1_HOME

Hi guys,
I've successfully flashed today rom I9070XXLQG_I9070PRTLQ1_HOME (polish play). I was planning to send my phone on guarancy repair so they can clean dusted camera but I've lost my guarancy card so all that was for nothing anyway I've noticed that after flashing this rom I can't connect my phone via USB - phone is charging but doesn't show that my device was connected.
Tried reinstalling samsung drivers and few other fixes searched on google like turning off device, pluging the cable and then turning it on but without any effect.
I've managed to root device and install CM10.2 but it didn't fix the problem (I've copied files on memory card on another phone).
Anyone faced similar problem and know how to fix it?
Thanks in advance
All the best.
Peruner said:
Hi guys,
I've successfully flashed today rom I9070XXLQG_I9070PRTLQ1_HOME (polish play). I was planning to send my phone on guarancy repair so they can clean dusted camera but I've lost my guarancy card so all that was for nothing anyway I've noticed that after flashing this rom I can't connect my phone via USB - phone is charging but doesn't show that my device was connected.
Tried reinstalling samsung drivers and few other fixes searched on google like turning off device, pluging the cable and then turning it on but without any effect.
I've managed to root device and install CM10.2 but it didn't fix the problem (I've copied files on memory card on another phone).
Anyone faced similar problem and know how to fix it?
Thanks in advance
All the best.
Click to expand...
Click to collapse
Turn on usb debugging in developer options. You might need to tap 7 times on rom version in About phone to get dev options.
Sent from my GT-I9070 using Tapatalk
shut_down said:
Turn on usb debugging in developer options. You might need to tap 7 times on rom version in About phone to get dev options.
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
Hi,
Thanks for fast reply,
I've tried that already - doesn't change anything.
Also phone is not visible in download mode.
I'd try:
- another usb cable
- another usb port (avoid hubs)
- another PC
- fresh system install
- another rom like anything stock based or cm10.1 maybe
what happens on your PC when you enter CWM and plug an usb cable
adamuadamu said:
I'd try:
- another usb cable - checked
- another usb port (avoid hubs) checked
- another PC checked
- fresh system install - tried on another PC..
- another rom like anything stock based or cm10.1 maybe - installed CM 10.2 hoping that it will fix the issue but problem still occurs
what happens on your PC when you enter CWM and plug an usb cable
Click to expand...
Click to collapse
absolutely nothing..no prompting windows with "installing driver"
Peruner said:
absolutely nothing..no prompting windows with "installing driver"
Click to expand...
Click to collapse
ok, anything happens in device manager, any new unrecognized devices shown there?
i have also had this problem from quiet some time and it happens with almost every rom for me:crying:
and temporary fix is
1) go to devices and printer(u will have ur device over there by its original name or as an storage device)
2)right click on ur device icon
3)select troubleshoot after some time it will ask u to apply fix
give permission after that it will install ur drivers once again n ur problem will be solved for a FEW DAYS
Hi again,
Thanks guys for your reply.
 @kunal19911 - sorry not working, my device is not visible at all anywhere
@adamuadamu as above - no unknown devices in device manager.
Peruner said:
Hi again,
Thanks guys for your reply.
@kunal19911 - sorry not working, my device is not visible at all anywhere
@adamuadamu as above - no unknown devices in device manager.
Click to expand...
Click to collapse
Have you tried to reboot phone. My phone gets like that when I charge it with wall charger, and can't be recognised by pc untill reboot. I forgot to tell you that.
Sent from my GT-I9070 using Tapatalk
shut_down said:
Have you tried to reboot phone. My phone gets like that when I charge it with wall charger, and can't be recognised by pc untill reboot. I forgot to tell you that.
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
Yep, I've tried - many times - as written before tried to plug in in download mode - also no effect.
I've never had this problem before, is there any way I could flash new rom without estabilishing USB connection?
Peruner said:
Yep, I've tried - many times - as written before tried to plug in in download mode - also no effect.
I've never had this problem before, is there any way I could flash new rom without estabilishing USB connection?
Click to expand...
Click to collapse
Huh, from CM10.2 you need to do it with Odin. Or to repartition preload partition. But I do not know how to do it.
Sent from my GT-I9070 using Tapatalk
shut_down said:
Huh, from CM10.2 you need to do it with Odin. Or to repartition preload partition. But I do not know how to do it.
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
AFAIK no need to repartition, but it's enough to format /preload (in CWM go to advanced - format /preload). at least worked for me when leaving 4.3 and 4.4 roms.
y dont u try flashing any other cm10.2 based rom with cwm?
The thing is that I don't have this issue because of CM 10.2.
It was cause since I've flashed stock ROM listed in the topic.
Flashing CM10.2 was a desparate try to fix it, after rooting stock rom, flashing cocore kernel didn't help.
Peruner said:
The thing is that I don't have this issue because of CM 10.2.
It was cause since I've flashed stock ROM listed in the topic.
Flashing CM10.2 was a desparate try to fix it, after rooting stock rom, flashing cocore kernel didn't help.
Click to expand...
Click to collapse
Then only thing coming to my mind is some hardware problem...
Ok guys thanks for all answers.
Yesterday my phone got discharged and doesn't want to charge anymore.
I'll bring it to mobile repairs.
Cheers
Peruner said:
Ok guys thanks for all answers.
Yesterday my phone got discharged and doesn't want to charge anymore.
I'll bring it to mobile repairs.
Cheers
Click to expand...
Click to collapse
USB connector on your phone, 99% hardware problem...

Categories

Resources