Database Develop

[HELP] Unbrick RAZR i X890

Hi people, I have a big problem with my friend's Razr i, I was trying to root it, but i didn't want to unlock my bootloader so tried several methods but not a single one worked, So i tried the one for unlocked bootloaders and ended up bricking my device, Now It's stuck on fastboot mode.
I've tried to flash some brazilian firmwares via RSD lite, but it get stuck on "6/9 flashing radio_signed" SO PLEASE SOMEONE GUIDE ME TO THE SOLUTION WHAT AM I DOING WRONG?
PS: Also tried to flash an argentinian Firmware but it didn't even let me start flashing bringing the error "Faled flashing process. Unknown fastboot command. (getvar)"
PS2: Also tried the eternityprj Alternate method without RSD, and it gets stuck on flashing recovery... and it also prompts some errors you can see in the attached file.
HELP ME PLEASE AS I SAID THE RAZR IS A FRIEND'S PHONE NOT MINE, I NEED TO SAVE IT.

Vaizen said:
Hi people, I have a big problem with my friend's Razr i, I was trying to root it, but i didn't want to unlock my bootloader so tried several methods but not a single one worked, So i tried the one for unlocked bootloaders and ended up bricking my device, Now It's stuck on fastboot mode.
I've tried to flash some brazilian firmwares via RSD lite, but it get stuck on "6/9 flashing radio_signed" SO PLEASE SOMEONE GUIDE ME TO THE SOLUTION WHAT AM I DOING WRONG?
PS: Also tried to flash an argentinian Firmware but it didn't even let me start flashing bringing the error "Faled flashing process. Unknown fastboot command. (getvar)"
PS2: Also tried the eternityprj Alternate method without RSD, and it gets stuck on flashing recovery... and it also prompts some errors you can see in the attached file.
HELP ME PLEASE AS I SAID THE RAZR IS A FRIEND'S PHONE NOT MINE, I NEED TO SAVE IT.
Click to expand...
Click to collapse
your secure level was to high for a non bootloader method and if you done a method with a unlocked bootloader and your bootloader was locked thats bad.
unlock your bootloader >>WARRANTY VOID<< install cwm and use any backup. or flash the 39 gb fw but i think you have yet to unlokc the bootloader to safe it.. and be patient dont try to much stuff if your battery goes low you need a factory adapter or something like this to charge ur razr i if the battery is down.
regards hope you get it waorking again

I solved my problem this way
Vaizen said:
Hi people, I have a big problem with my friend's Razr i, I was trying to root it, but i didn't want to unlock my bootloader so tried several methods but not a single one worked, So i tried the one for unlocked bootloaders and ended up bricking my device, Now It's stuck on fastboot mode.
I've tried to flash some brazilian firmwares via RSD lite, but it get stuck on "6/9 flashing radio_signed" SO PLEASE SOMEONE GUIDE ME TO THE SOLUTION WHAT AM I DOING WRONG?
PS: Also tried to flash an argentinian Firmware but it didn't even let me start flashing bringing the error "Faled flashing process. Unknown fastboot command. (getvar)"
PS2: Also tried the eternityprj Alternate method without RSD, and it gets stuck on flashing recovery... and it also prompts some errors you can see in the attached file.
HELP ME PLEASE AS I SAID THE RAZR IS A FRIEND'S PHONE NOT MINE, I NEED TO SAVE IT.
Click to expand...
Click to collapse
Hello good morning
I brick 2 phones trying to get one of them and in the process did fail at 2, how the recovery?
1. - Use RSD Lite version 6.1.4
2. - Use 1 extra phone (htc wildfire root and backup CWMR in case of failure)
3. - Use a GB retail rom (CFC_8.7.1I-110_IFW-39_S7_UCASMI01E1017.0R_USASMIICSRTGB_P042_A005_S1FF_fb.xml)
4. - The phone to unbrick, put fastboot mode, switching on via the power button and vol (-) until the fastboot mode screen read "fastboot reason:" if it does not, re-try until there is
5. should not say "fastboot reason: flash failure, or anything else xxxxxx xxxx xxxxx ............"
6. - Boot rsd lite 6.1.4, select retail rom, and indicate that only "unzip" connects your motorola razr I, and it connects back to the other phone (in my case htc wildfire), which has a debug mode enabled.
7. - Note, that in the window of the Rsd Lite in row 1, the Razr I phone is detected, then you start flashing in RSD Lite 6.1.4, see screenshot of your razr I to see that data is being sent, (the other phone should not be affected and only serves as a decoy to usb drivers, Rsd lite at least do not damage to my phone)
8. - Remember flashing erase the card was in your internal Razr I therefore will lose programs, photos or music you had or downloaded to the SD or internal virtual
9. - Flashing can stop and have to do everything again, but remember that no fastboot mode screen should read:
"fastboot reason: flash failure or otherwise else xxxxxx xxxxxxx ......." must be clean that is just:
"fastboot reason: "
luck : Good:
Warning, do not take responsibility for any damage to your cell involved in the process, ......... the lure of the phone can be found on youtube and just suits the way because of my need to get my phone ........ in no way am programmer or software developer, for which only comment what turned out ok to me
excuse my bad English

jacbarahona72 said:
Hello good morning
I brick 2 phones trying to get one of them and in the process did fail at 2, how the recovery?
1. - Use RSD Lite version 6.1.4
2. - Use 1 extra phone (htc wildfire root and backup CWMR in case of failure)
3. - Use a GB retail rom (CFC_8.7.1I-110_IFW-39_S7_UCASMI01E1017.0R_USASMIICSRTGB_P042_A005_S1FF_fb.xml)
4. - The phone to unbrick, put fastboot mode, switching on via the power button and vol (-) until the fastboot mode screen read "fastboot reason:" if it does not, re-try until there is
5. should not say "fastboot reason: flash failure, or anything else xxxxxx xxxx xxxxx ............"
6. - Boot rsd lite 6.1.4, select retail rom, and indicate that only "unzip" connects your motorola razr I, and it connects back to the other phone (in my case htc wildfire), which has a debug mode enabled.
7. - Note, that in the window of the Rsd Lite in row 1, the Razr I phone is detected, then you start flashing in RSD Lite 6.1.4, see screenshot of your razr I to see that data is being sent, (the other phone should not be affected and only serves as a decoy to usb drivers, Rsd lite at least do not damage to my phone)
8. - Remember flashing erase the card was in your internal Razr I therefore will lose programs, photos or music you had or downloaded to the SD or internal virtual
9. - Flashing can stop and have to do everything again, but remember that no fastboot mode screen should read:
"fastboot reason: flash failure or otherwise cuarquier xxxxxx xxxxxxx ......." must be clean that is just:
"fastboot reason: "
luck : Good:
Warning, do not take responsibility for any damage to your cell involved in the process, ......... the lure of the phone can be found on youtube and just suits the way because of my need to get my phone ........ in no way am programmer or software developer, for which only comment what turned out ok to me
excuse my bad English
Click to expand...
Click to collapse
Could PM Me with the instructions in spanish, there are some things that i do not understand in your english
Tried to use your method but RSD lite got stuck on "4/11 erase userdata" and the phone says "program dummy sp block for userdata" I don't thin I understood well the part of the second phone, does it have to be on, i mean normal on, or does it have to be in flashmode aswell?

[Q] unlock bootloader warning logo on RAZR I

Hello anyone know how to remove unlock bootloader warning logo ? Please Help i will be very gratitude for any info

Just download the firmware for your region and extract the file logo_signed, put the device into fastboot mode (press power + vol -) open a console and run the command fastboot flash ulogo logo_signed and reboot your device Hope this helps
Sent from my XT890 using xda app-developers app

You can do it this way
Only ICS and, if the case, maybe Jelly Beam accesed for Homemade
Does not work on Jelly Beam accessed by OTA or RSD Lite
If you mean the caveat that you unlocked bootloader, use the information to a htcmania forum, and as if you can not make a link to there without censor me,
is simple, get files
1. - Fastboot.exe
2. - logo_signed (must be obtained from the firmware, exploring the zip file)
sorry for my bad English
Donwload files
http://db.tt/tak1LsuU
note: logo_signed file is of the firmware: Brasil.en.BR
Procedure
1. - Put the downloaded files in a folder in the root "C" on your pc, (I call this folder Android for example)
2.- Put the phone in fastboot mode (power button and Vol - squeezing them a few seconds until the screen fastboot mode) and connect with USB the phone to pc
3.- Opening a cmd screen, we stand there, I'm in cmd C:\Android\
4. - cheking with command fastboot devices
5. - Performed the command fastboot flash ulogo logo_signed
6. - Conducted after ending command fastboot reboot and that's it
7.- enjoy
Warning: only share what I see written on a forum and I served, so I do not take responsibility for any damage this may cause to your phone

hello
keeps saying somethink about verication lads!!

Does anynone know how to remove this warning from Jelly Bean?

andy_macleod said:
Does anynone know how to remove this warning from Jelly Bean?
Click to expand...
Click to collapse
My friend, download the attatched file and enter fastboot mode, in CMD prompt write the following:
fastboot flash logo logo-CMAK.bmp
fastboot flash ulogo logo-CMAK.bmp
Cheers.

xpc21 said:
My friend, download the attatched file and enter fastboot mode, in CMD prompt write the following:
fastboot flash logo logo-CMAK.bmp
fastboot flash ulogo logo-CMAK.bmp
Cheers.
Click to expand...
Click to collapse
Thanks for you quickly response.
I use stock JB 4.1, may I do your procedure or it just work with cyanogenmod rom?

andy_macleod said:
Thanks for you quickly response.
I use stock JB 4.1, may I do your procedure or it just work with cyanogenmod rom?
Click to expand...
Click to collapse
Sorry andy!
This method i´ve tried and worked on Omar-AVelar ROM April 09, the newer ones didnt worked.
I dunno if will work on another.

Bounty
andy_macleod said:
Thanks for you quickly response.
I use stock JB 4.1, may I do your procedure or it just work with cyanogenmod rom?
Click to expand...
Click to collapse
I too am interested in removing the unlocked warning on OTA JB. We should set up a bounty

xd69 said:
I too am interested in removing the unlocked warning on OTA JB. We should set up a bounty
Click to expand...
Click to collapse
The biggest problem of Razr i is the intel architecture x86 not common in mobiles.

xpc21 said:
Sorry andy!
This method i´ve tried and worked on Omar-AVelar ROM April 09, the newer ones didnt worked.
I dunno if will work on another.
Click to expand...
Click to collapse
Do you mean that you think we will never be free from this ugly warning? :crying:

marcospbs said:
Do you mean that you think we will never be free from this ugly warning? :crying:
Click to expand...
Click to collapse
I don't think so. Just for while, soon someone will find a way to disable this "ugly" warning.

xpc21 said:
My friend, download the attatched file and enter fastboot mode, in CMD prompt write the following:
fastboot flash logo logo-CMAK.bmp
fastboot flash ulogo logo-CMAK.bmp
Cheers.
Click to expand...
Click to collapse
It doesn't works on Pi-Lama ROM 0.6
I suggest you don't even try to flash it. You'll brick your phone. I'm currently stuck on Fastboot and can't boot properly, but i've a CWM backup and can't access CWM anymore.
If you're stucked, i suggest you to flash Omar-Avelar boot.img found here.

Speeding up the process
andy_macleod said:
I don't think so. Just for while, soon someone will find a way to disable this "ugly" warning.
Click to expand...
Click to collapse
A high enough bounty would make someone dev it alot faster!

xd69 said:
A high enough bounty would make someone dev it alot faster!
Click to expand...
Click to collapse
For sure. Lets find at least 100 users from razr i and all deposit US$1,00 in a specific paypall account and give the bounty for who find a way to disable this boring warning.

andy_macleod said:
For sure. Lets find at least 100 users from razr i and all deposit US$1,00 in a specific paypall account and give the bounty for who find a way to disable this boring warning.
Click to expand...
Click to collapse
Im willing to input $20 to the cause so that this gets done faster!

Any luck on JB?

Well, this is what I tried just now:
- I pulled 'logo_signed' and 'ulogo_signed' from 'CFC_9.8.2I-50_SMI-26_S7_USASMIJBRTEU.xml.zip' file, which is the one I had flashed before Omar's ROM.
- I then simple renamed them one with the name of the other (logo became ulogo and viceversa) and tried to flash via 'fastboot flash'
- The error I got was 'Invalid OSID for logo : 2' when attempted to flash 'logo_signed' and 'Invalid OSID for ulogo : 0' for 'ulogo_signed'
- Opened both files using XVI32 and found almost the same header up to hex addr 9A, where there was a 02 on logo file and a 00 on ulogo file
- I edited them, changing the 02 for 00 and viceversa, saved them and tried to flash again, I then get:
At phone's screen:
Fastboot command failed
Getvar max-download size
In cmd screen:
writing 'ulogo'...
Invalid image ulogo
Preflash validation failed
writing 'logo'...
Invalid image logo
Preflash validation failed
At least I got rid of the first error, but have no idea on this second one... any guesses?
.

Hi, what is your command line ? Do you use fastboot ? Rsd lite ?

nick7722 said:
...
- I then simple renamed them one with the name of the other (logo became ulogo and viceversa) and tried to flash via 'fastboot flash'
...
Click to expand...
Click to collapse
I was probably not very clear, I tried flashing them via fastboot, that is 'fastboot flash logo logo_signed' and 'fastboot flash ulogo ulogo_signed'
.

Softely Unbrick XT890 Razr i - Really Unbrick the Zombie

Well do not think that this thread is one among others. It's my experience when i messed up with my Razri. I wish I had this before, so I'm sharing it with you !
Every has his experience and a way to do it, so this is mine
First I searched everywhere, as you already did, the technique is globally the same but one important thing was missing and I had to get my Razri ON, it's an "Intel" !
I tried this app to install the needed drivers and to flash firmware, and I tried also this
Just let me explain what i had before the "softbrick" just to assure you that your Razri is not dead and it's up to you to bring it up from the dead and you can do that
I softbricked it by rooting my JB android with ICS, I messed up, in you case might be different but you are here cause we all had the same problem
Well, if your Razri Motorola XT890 cannot boot (or keeps rebooting with no end), charging the battery is [im]possible. Below is a quick how-to
RSD Lite detects the Razri as a "MEDFIELD" device. You can use RSD Lite to flash your phone whith a new Android Image [JB here, for "JB 4.1.2" I choose "CFC_9.8.2I-50_SMI-26_S7_USASMIJBRTEU.xml.zip"] but this is doable only after getting to the fastboot menu
1. Install EXE drivers for the "MEDFIELD" device
2. Run BAT file and follow the instructions inside
3. You might restart you Razri
You need to use the wright ifwi & dnx file, so I included those for JB (and not for ICS and if you did you will get "Service code corrupt" error but don't worry you have just to get the good version of ifwi&dnx for your android version)
Just to say, for everyone who has this trouble, and thinks that his Razri is dead, good new It is not, but remember that to make this work that fastboot menu is in there, somewhere just use the right combination, no matter what you have on the screen (Bootloader Unlocked screen or nothing at all just a black screen)
This is a little How-To:
Power botton+Volume Down botton at the same time
Wait until the screen flashes or the green led light to flash the immediately release the Power button while keeping the Volume down pushed (do not release ever) until the fastboot menu appears
Good Luck

service required code corrupt
DoxyMarket said:
Well do not think that this thread is one among others. It's my experience when i messed up with my Razri. I wish I had this before, so I'm sharing it with you !
Every has his experience and a way to do it, so this is mine
First I searched everywhere, as you already did, the technique is globally the same but one important thing was missing and I had to get my Razri ON, it's an "Intel" !
I tried this app to install the needed drivers and to flash firmware, and I tried also this
Just let me explain what i had before the "softbrick" just to assure you that your Razri is not dead and it's up to you to bring it up from the dead and you can do that
I softbricked it by rooting my JB android with ICS, I messed up, in you case might be different but you are here cause we all had the same problem
Well, if your Razri Motorola XT890 cannot boot (or keeps rebooting with no end), charging the battery is [im]possible. Below is a quick how-to
RSD Lite detects the Razri as a "MEDFIELD" device. You can use RSD Lite to flash your phone whith a new Android Image [JB here, for "JB 4.1.2" I choose "CFC_9.8.2I-50_SMI-26_S7_USASMIJBRTEU.xml.zip"] but this is doable only after getting to the fastboot menu
1. Install EXE drivers for the "MEDFIELD" device
2. Run BAT file and follow the instructions inside
3. You might restart you Razri
You need to use the wright ifwi & dnx file, so I included those for JB (and not for ICS and if you did you will get "Service code corrupt" error but don't worry you have just to get the good version of ifwi&dnx for your android version)
Just to say, for everyone who has this trouble, and thinks that his Razri is dead, good new It is not, but remember that to make this work that fastboot menu is in there, somewhere just use the right combination, no matter what you have on the screen (Bootloader Unlocked screen or nothing at all just a black screen)
This is a little How-To:
Power botton+Volume Down botton at the same time
Wait until the screen flashes or the green led light to flash the immediately release the Power button while keeping the Volume down pushed (do not release ever) until the fastboot menu appears
Good Luck
Click to expand...
Click to collapse
hello good afternoon,
Could you tell me if it corrects this type of unbrick?
service required code corrupt. appears on the black screen.
already thanks.

DoxyMarket said:
Well do not think that this thread is one among others. It's my experience when i messed up with my Razri. I wish I had this before, so I'm sharing it with you !
Every has his experience and a way to do it, so this is mine
First I searched everywhere, as you already did, the technique is globally the same but one important thing was missing and I had to get my Razri ON, it's an "Intel" !
I tried this app to install the needed drivers and to flash firmware, and I tried also this
Just let me explain what i had before the "softbrick" just to assure you that your Razri is not dead and it's up to you to bring it up from the dead and you can do that
I softbricked it by rooting my JB android with ICS, I messed up, in you case might be different but you are here cause we all had the same problem
Well, if your Razri Motorola XT890 cannot boot (or keeps rebooting with no end), charging the battery is [im]possible. Below is a quick how-to
RSD Lite detects the Razri as a "MEDFIELD" device. You can use RSD Lite to flash your phone whith a new Android Image [JB here, for "JB 4.1.2" I choose "CFC_9.8.2I-50_SMI-26_S7_USASMIJBRTEU.xml.zip"] but this is doable only after getting to the fastboot menu
1. Install EXE drivers for the "MEDFIELD" device
2. Run BAT file and follow the instructions inside
3. You might restart you Razri
You need to use the wright ifwi & dnx file, so I included those for JB (and not for ICS and if you did you will get "Service code corrupt" error but don't worry you have just to get the good version of ifwi&dnx for your android version)
Just to say, for everyone who has this trouble, and thinks that his Razri is dead, good new It is not, but remember that to make this work that fastboot menu is in there, somewhere just use the right combination, no matter what you have on the screen (Bootloader Unlocked screen or nothing at all just a black screen)
This is a little How-To:
Power botton+Volume Down botton at the same time
Wait until the screen flashes or the green led light to flash the immediately release the Power button while keeping the Volume down pushed (do not release ever) until the fastboot menu appears
Good Luck
Click to expand...
Click to collapse
Hi
do you have any solution for "service required code corrupt" plz
thanx

If you've tried to root your JB Motorola RAZR I with the ICS root-method don't worry. The ICS-root-method flash a unsave boot image, which is for the ICS firmware. That's why the RAZR with JB have problems to boot.
To make everything working again, you need:
- RAZR I PC driver
- fastboot (PC program)
- the right boot image for your JB version. (e.g. retail.EU) (download the right version from firmware-thread and search for a file "boot.img" )
If you have everything prepared do the following things:
- start your RAZR I (make sure, that it doesn't boot into bootloop)
- connect your RAZR I to your PC
- on PC start a command line/terminal and (for windows users) navigate in the directory with the fastboot.exe and make sure that the boot.img file is in the same directory
(Linux users navigate into the directory with the boot.img)
- type: fastboot flash boot boot.img
- wait until it's done
- reboot the device by typing: fastboot reboot
And that's it. Your personal data won't be touched, everything is like it was before.
Gesendet von meinem XT890 mit Tapatalk 4

Try this
sysmanin said:
Hi
do you have any solution for "service required code corrupt" plz
thanx
Click to expand...
Click to collapse
It's probably beacause tou updated your Formware with the wrong version, try this out:
You need to use the wright ifwi & dnx file, so I included those for JB (and not for ICS and if you did you will get "Service code corrupt" error but don't worry you have just to get the good version of ifwi&dnx for your android version) ==> You can get it from de XML file form sbf.droid-developers.org/smi/list.php it depends in which android version you were befor, in my case i took "CFC_9.8.2I-50_SMI-26_S7_USASMIJBRTEU.xml.zip"
So you have to Unzip it and there you'll find the ifwi & dnx files

Nice
cupioscire said:
If you've tried to root your JB Motorola RAZR I with the ICS root-method don't worry. The ICS-root-method flash a unsave boot image, which is for the ICS firmware. That's why the RAZR with JB have problems to boot.
To make everything working again, you need:
- RAZR I PC driver
- fastboot (PC program)
- the right boot image for your JB version. (e.g. retail.EU) (download the right version from firmware-thread and search for a file "boot.img" )
If you have everything prepared do the following things:
- start your RAZR I (make sure, that it doesn't boot into bootloop)
- connect your RAZR I to your PC
- on PC start a command line/terminal and (for windows users) navigate in the directory with the fastboot.exe and make sure that the boot.img file is in the same directory
(Linux users navigate into the directory with the boot.img)
- type: fastboot flash boot boot.img
- wait until it's done
- reboot the device by typing: fastboot reboot
And that's it. Your personal data won't be touched, everything is like it was before.
Gesendet von meinem XT890 mit Tapatalk 4
Click to expand...
Click to collapse
Worth testing. Very useful for people having the issue

Hello everyone,my phone had bricked;
I was on jelly bean 4.1.2 , Systemversion : 91.2.26001.XT890.Retail.en.EU ( Firmwareupgrade)
my question is ,using this method wich ifwi & dnx file could i choose ?
Thanks in advance

DoxyMarket said:
Well do not think that this thread is one among others. It's my experience when i messed up with my Razri. I wish I had this before, so I'm sharing it with you !
Every has his experience and a way to do it, so this is mine
First I searched everywhere, as you already did, the technique is globally the same but one important thing was missing and I had to get my Razri ON, it's an "Intel" !
I tried this app to install the needed drivers and to flash firmware, and I tried also this
Just let me explain what i had before the "softbrick" just to assure you that your Razri is not dead and it's up to you to bring it up from the dead and you can do that
I softbricked it by rooting my JB android with ICS, I messed up, in you case might be different but you are here cause we all had the same problem
Well, if your Razri Motorola XT890 cannot boot (or keeps rebooting with no end), charging the battery is [im]possible. Below is a quick how-to
RSD Lite detects the Razri as a "MEDFIELD" device. You can use RSD Lite to flash your phone whith a new Android Image [JB here, for "JB 4.1.2" I choose "CFC_9.8.2I-50_SMI-26_S7_USASMIJBRTEU.xml.zip"] but this is doable only after getting to the fastboot menu
1. Install EXE drivers for the "MEDFIELD" device
2. Run BAT file and follow the instructions inside
3. You might restart you Razri
You need to use the wright ifwi & dnx file, so I included those for JB (and not for ICS and if you did you will get "Service code corrupt" error but don't worry you have just to get the good version of ifwi&dnx for your android version)
Just to say, for everyone who has this trouble, and thinks that his Razri is dead, good new It is not, but remember that to make this work that fastboot menu is in there, somewhere just use the right combination, no matter what you have on the screen (Bootloader Unlocked screen or nothing at all just a black screen)
This is a little How-To:
Power botton+Volume Down botton at the same time
Wait until the screen flashes or the green led light to flash the immediately release the Power button while keeping the Volume down pushed (do not release ever) until the fastboot menu appears
Good Luck
Click to expand...
Click to collapse
Hi! i have a chance to revive my razr i?
HI guys! I have a problem.
i have downgraded with this rom:http://forum.xda-developers.com/showthread.php?t=2294653
and after i tried to flash two rom with rsd lite:
CFC_signed_customer_8.7.1I-110_IFW-31_RTGB.xml
CFC_8.7.1I-110_IFW-39_S7_UCASMI01E1017.0R_USASMIICSRTGB_P042_A005_S1F F_fb.xml
now the phone is locked , in the screen is write: service required code corrupt
and the green led .. can help me please?

It will work!!... keep trying
peter971215 said:
Hi! i have a chance to revive my razr i?
HI guys! I have a problem.
i have downgraded with this rom:http://forum.xda-developers.com/showthread.php?t=2294653
and after i tried to flash two rom with rsd lite:
CFC_signed_customer_8.7.1I-110_IFW-31_RTGB.xml
CFC_8.7.1I-110_IFW-39_S7_UCASMI01E1017.0R_USASMIICSRTGB_P042_A005_S1F F_fb.xml
now the phone is locked , in the screen is write: service required code corrupt
and the green led .. can help me please?
Click to expand...
Click to collapse
Check this for your problem http://forum.xda-developers.com/showthread.php?t=2134391
You must use the boot.img for you Android version (boot.img isn't the same for ICS, JB or GB)

DoxyMarket said:
Check this for your problem http://forum.xda-developers.com/showthread.php?t=2134391
You must use the boot.img for you Android version (boot.img isn't the same for ICS, JB or GB)
Click to expand...
Click to collapse
i can't get fastboot, the phone go on "service required code corrupt" screen with the green led on and nothing..

Try again
peter971215 said:
i can't get fastboot, the phone go on "service required code corrupt" screen with the green led on and nothing..
Click to expand...
Click to collapse
This would help http://forum.xda-developers.com/showthread.php?t=2220242

DoxyMarket said:
This would help http://forum.xda-developers.com/showthread.php?t=2220242
Click to expand...
Click to collapse
Nothing... the phone show Only the green led and nothing.....

Again
peter971215 said:
Nothing... the phone show Only the green led and nothing.....
Click to expand...
Click to collapse
Charge the phone
And try to get to Fastboot menu

help
Hello!
Pozhausta tell where to get the files (ifwi and dnx) of this firmware (CFC_8.7.1I-110_IFW-39_S7_UCASMI01E1017.0R_USASMIICSRTGB_P042_A005_S1F F) and then archive them in there?

You simply saved my life!

I did the whole process, but now i'm stuck on (flash boot "boot_signed") in RSD, any ideas?

renatotec said:
I did the whole process, but now i'm stuck on (flash boot "boot_signed") in RSD, any ideas?
Click to expand...
Click to collapse
You probably did not use the right image for you phone

peter971215 said:
Nothing... the phone show Only the green led and nothing.....
Click to expand...
Click to collapse
Have you already found a solution mate ?

GRACIAS!!!
Instalé una ROM brasilera porque se había brickeado, era JB, luego instalé la ICS y quedo muerto, encontre tu post primero y funcionó perfecto, mil gracias!!!!

Motorola XT890 Razr i
Hi, I tried to follow your instructions but so far my cell phone is still death. when I run the bat file I got this error message. libusB0.dll not found. also I don't know how RDS lite tools detects my cel. it is not working as the same manner as you showed us. can you help me to find a way to unbrick my cell phone.
thanks

[Q] Help unbrick device

After installing Vanir, I don't know what went wrong !!! it was freezing then after trying to charge it, it bricked!!!!
I searched the forume and found major two ways
FIRST
RuedasLucas Here :
http://forum.xda-developers.com/showthread.php?t=1932123
i followed the info. correctly and stuck in the same problem the man in the thread have, I am stuck in LG logo
so i tied the second
http://forum.xda-developers.com/showpost.php?p=40174748&postcount=9&nocache=1
and i am stuck in installing " LGmobile Support Tool " because i am in windows 8 and it is not compitable with it. every time trying to install it seems not responding.
so i am stuck now and donot know how to unbrick it !!! no one tell me to set up win 7 because i donot have one

The LG support tool works fine on my Windows 8 64-bit version. Look for the thread on 'Flashing a KDZ with pictures' and follow it to the letter.

did u install gapps ? vanir installation never had a problem. about windows 8 x64 i can confirm the support tool is working because i had them some months ago ( now im on ubuntu x64 ).
and its not a good idea if on some little mistake u try go back to stock. the reason u tried flash vanir was to go away from stock. if u flash back to stock then in a few days will want to flash again a custom. so try again and do it right !
also dont take off battery. no need. maybe this battery trick is history. i never did that. i just long pressed power to reboot and then i just pressed a few times the vol down ( not hold ).

SimonTS said:
The LG support tool works fine on my Windows 8 64-bit version. Look for the thread on 'Flashing a KDZ with pictures' and follow it to the letter.
Click to expand...
Click to collapse
Actually i did this before posting from that thread
http://forum.xda-developers.com/showthread.php?t=2069723
between step 3 and 4 it give me " app. not responding "

kessaras said:
did u install gapps ? vanir installation never had a problem. about windows 8 x64 i can confirm the support tool is working because i had them some months ago ( now im on ubuntu x64 ).
and its not a good idea if on some little mistake u try go back to stock. the reason u tried flash vanir was to go away from stock. if u flash back to stock then in a few days will want to flash again a custom. so try again and do it right !
also dont take off battery. no need. maybe this battery trick is history. i never did that. i just long pressed power to reboot and then i just pressed a few times the vol down ( not hold ).
Click to expand...
Click to collapse
i didn't catch it. But if u mean i reflash vanir, The mobile is " dead now !!!! " so i must unbrick to any firmware then reflash

arrivals18 said:
Actually i did this before posting from that thread
http://forum.xda-developers.com/showthread.php?t=2069723
between step 3 and 4 it give me " app. not responding "
Click to expand...
Click to collapse
Try disabling any anti-virus first just to make sure that's not interfering. I've never heard of the proces freezing there before.

SimonTS said:
Try disabling any anti-virus first just to make sure that's not interfering. I've never heard of the proces freezing there before.
Click to expand...
Click to collapse
Ok is the tool take some time to load if internet connection is not good ?!!

arrivals18 said:
Ok is the tool take some time to load if internet connection is not good ?!!
Click to expand...
Click to collapse
It shouldn't make any real difference, no.

arrivals18 said:
Actually i did this before posting from that thread
http://forum.xda-developers.com/showthread.php?t=2069723
between step 3 and 4 it give me " app. not responding "
Click to expand...
Click to collapse
You did disable the Modem, right? And sometimes, the process seems to take a little long. You have to be patient.
Sent from my Optimus 4X HD using XDA Premium 4 mobile app

arrivals18 said:
i didn't catch it. But if u mean i reflash vanir, The mobile is " dead now !!!! " so i must unbrick to any firmware then reflash
Click to expand...
Click to collapse
mmmmmm.... if at the end u cant do anything and since, propably, your bootloader is unlocked , u can reinstall the recovery using the adb ( use cmd: adb reboot bootloader and then, when u are there , hit: adb install [recovery zip file path/name] ). eh the rest u know them so u dont need to use any kdz and tire urself with that boring procedure

SimonTS said:
It shouldn't make any real difference, no.
Click to expand...
Click to collapse
Ok i already installed win. 7 and installed the tool that take really short time.
i connect the phone to usb in the mode and choose in the tool " recover from wrong update " it downloaded nearly 573 mb. and installed it in the phone, and when the phone restarts, the phone sticks in LG logo . SO what now !!!!!!!
[email protected] said:
You did disable the Modem, right? And sometimes, the process seems to take a little long. You have to be patient.
Yep. every thing ok as u see.
Sent from my Optimus 4X HD using XDA Premium 4 mobile app
Click to expand...
Click to collapse
kessaras said:
mmmmmm.... if at the end u cant do anything and since, probably, your bootloader is unlocked , u can re-install the recovery using the adb ( use cmd: adb reboot bootloader and then, when u are there , hit: adb install [recovery zip file path/name] ). eh the rest u know them so u dont need to use any kdz and tire urself with that boring procedure
Click to expand...
Click to collapse
Yep. This may happened, when i opened the bootloader i use the code 3845#*880#>Boatloader>check boatloader> Unlock,
soi knew that it's unlocked. Am i wrong ? Guys i done both the first and the second method and all stuck in LG logo
in the first i used V20C_00.kdz and did the rights steps and also stuck !!!! so what now !!!!!!!!!!!!!!11

arrivals18 said:
Ok i already installed win. 7 and installed the tool that take really short time.
i connect the phone to usb in the mode and choose in the tool " recover from wrong update " it downloaded nearly 573 mb. and installed it in the phone, and when the phone restarts, the phone sticks in LG logo . SO what now !!!!!!!
Yep. This may happened, when i opened the bootloader i use the code 3845#*880#>Boatloader>check boatloader> Unlock,
soi knew that it's unlocked. Am i wrong ? Guys i done both the first and the second method and all stuck in LG logo
in the first i used V20C_00.kdz and did the rights steps and also stuck !!!! so what now !!!!!!!!!!!!!!11
Click to expand...
Click to collapse
Try to flash V20A with LG Flash Tool and to unlock the bootloader this:
http://www.4shared.com/rar/HFf4newq/LGO4X-UNLOCK-BOOTLOADER.html
Hope it helps, I unlock mine with that, tooked me a few tries...

arrivals18 said:
Ok i already installed win. 7 and installed the tool that take really short time.
i connect the phone to usb in the mode and choose in the tool " recover from wrong update " it downloaded nearly 573 mb. and installed it in the phone, and when the phone restarts, the phone sticks in LG logo . SO what now !!!!!!!
Click to expand...
Click to collapse
The first thing to do if it sticks on the LG Logo is to boot into the LG recovery and do a factory reset - just to make sure. You often have to do this after flashing a new KDZ anyway.

RuedasLocas said:
Try to flash V20A with LG Flash Tool and to unlock the bootloader this:
http://www.4shared.com/rar/HFf4newq/LGO4X-UNLOCK-BOOTLOADER.html
Hope it helps, I unlock mine with that, tooked me a few tries...
Click to expand...
Click to collapse
OK look what i did :
1- connect device with usb cable and holding vol- till it get s/w update
2-when pressing adb reboot bootloader command it gives me unknown error
3- fastboot oem unlock : it gives me device not found
Also tried :
1- connect device to usb cable with holding power+ vol+ to recover mode
2-when pressing adb reboot bootloader command its ok
3- fastboot oem unlock : it gives me FAILED (command write failed (Unknown error))
finished. total time: 0.587s

SimonTS said:
The first thing to do if it sticks on the LG Logo is to boot into the LG recovery and do a factory reset - just to make sure. You often have to do this after flashing a new KDZ anyway.
Click to expand...
Click to collapse
HOW ?!!!!!!!!
when pressing power with vol+ it gives me the message " This mode is for data backup at service center. After removing and reattachment of battery press power key to reboot and keep using phone" so what how can wipe date/factory reset ?

Power and vol-, not+

Flying_Bear said:
Power and vol-, not+
Click to expand...
Click to collapse
yep yep yep it's done and now i see the rom >>> now can i root unlock bootloader flash to vanir or not ?

arrivals18 said:
yep yep yep it's done and now i see the rom >>> now can i root unlock bootloader flash to vanir or not ?
Click to expand...
Click to collapse
i told you earlier at my post here , that you dont need to flash kdz and go back to stock if ur final goal is a custom rom. u could reinstall recovery using adb bootloader. nevermind -_- u just do things harder for u. bootloader is unlocked u cant unlock the unlocked. bootloader isnt locking again when u just force the stock rom in. there is another procedure u must do to lock it. u can install recovery ( if u havent ) and just install a custom rom
EDIT: you dont need this anymore but ill explain.
adb is used to force files into the device. its a way to communicate with the phone using the pc. u can use the adb to install whatever u like but if u are not sure that the thing u are trying to install is ok for the device, then u will have a problem.
so , since your bootloader is already unlocked, you can go in adb bootloader and force the recovery in.
open cmd:
Lets say i use the teamwin recovery. ill rename it to be easy and save it to desktop. my file is: recovery.zip
open cmd as administrator and go to desktop: cd .....[path to ur desktop]
1. adb start-server
2. adb reboot bootloader
3. fastboot fash recovery recovery.zip
thats it. 3 commands is 10 seconds work. u dont need to go back to stock rom to install a custom rom.

(SOLVED BY REPLACE MOTHER BORD) firmware version

hi,i need this version ale-l21c113b130,i have search on internet but,i can found,any idea????

try here, http://huaweip8lite.blogspot.co.uk/ just use google to translate & scroll down for rom list

gordonyoung53 said:
try here, http://huaweip8lite.blogspot.co.uk/ just use google to translate & scroll down for rom list
Click to expand...
Click to collapse
Thanks for your reply,i will try with version ale-l21v100r001c432b136a,to see if can i unbrick my phone

cristi.blidariu said:
hi,i need this version ale-l21c113b130,i have search on internet but,i can found,any idea????
Click to expand...
Click to collapse
To unbrick your phone the fastest way is to unlock bootloader which takes you 10-15 mins, and fastboot flash any rom. Easy peasy.

pilililo2 said:
To unbrick your phone the fastest way is to unlock bootloader which takes you 10-15 mins, and fastboot flash any rom. Easy peasy.
Click to expand...
Click to collapse
i have bootloader unlock,i have try many firmware to flash via adb,but when i type fastboot reboot only led blink red for 2 sec and then green for 10 sec,after that the phone shutdown,if i try to turn on same thing,led blink red the green,i dont have any clue what is the problem

To flash a firmware you must use Fastboot commands NOT adb. ADB commands are for when android is already booted. First flash boot.img, recovery.img... etc and then reboot your phone. Its should be working or at least booting. You should check out the mega-thread recently posted in the general section. It might help you.

pilililo2 said:
To flash a firmware you must use Fastboot commands NOT adb. ADB commands are for when android is already booted. First flash boot.img, recovery.img... etc and then reboot your phone. Its should be working or at least booting. You should check out the mega-thread recently posted in the general section. It might help you.
Click to expand...
Click to collapse
here what i use
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot reboot(i have try all version based on single sim and dual sim,the same error,when is try to boot the led indicator blink red then green and is shutdown,if i try to turn on same error led indicator blink red then green,the only option that i have is just to putt the phone in fastboot/rescue mod,so i don't know what is the problem )

Wow ive never heard of that :/ Have you tried flashing recovery before cust? Thats what I usually do. And I also use mfastboot instead of fastboot.

pilililo2 said:
Wow ive never heard of that :/ Have you tried flashing recovery before cust? Thats what I usually do. And I also use mfastboot instead of fastboot.
Click to expand...
Click to collapse
is not my phone,and to be honest with you i have upgrade and downgrade my phone(ale-l21c432b170) many times with out problem,but with this one i dont have any idea what is the problem,so this is his history,it was on ale-l21c113b130 single sim and my friend try to make dual sim by flash version b41c>>b46b>>b052,at the end she will end up with balong error,so his restart phone and from there the phone wont boot up,not even in recovery,so what is the problem????

I have balong bug in my phone and it doesnt really do anything, just a wrong build.prop but phone works perfectly, im on 565 single sim. Im sorry but a really have no idea on what is happening to your friends phone since ive never had that error. Maybe you could try talking to some more experienced users such as Sokkoban to see if he can help you. Sorry

pilililo2 said:
I have balong bug in my phone and it doesnt really do anything, just a wrong build.prop but phone works perfectly, im on 565 single sim. Im sorry but a really have no idea on what is happening to your friends phone since ive never had that error. Maybe you could try talking to some more experienced users such as Sokkoban to see if he can help you. Sorry
Click to expand...
Click to collapse
k,thanks for your reply

pilililo2 said:
I have balong bug in my phone and it doesnt really do anything, just a wrong build.prop but phone works perfectly, im on 565 single sim. Im sorry but a really have no idea on what is happening to your friends phone since ive never had that error. Maybe you could try talking to some more experienced users such as Sokkoban to see if he can help you. Sorry
Click to expand...
Click to collapse
Balong bug -> make sure your 1 on the right location or 2 install the vendor file from your build (vendor MM should do)
cristi.blidariu said:
is not my phone,and to be honest with you i have upgrade and downgrade my phone(ale-l21c432b170) many times with out problem,but with this one i dont have any idea what is the problem,so this is his history,it was on ale-l21c113b130 single sim and my friend try to make dual sim by flash version b41c>>b46b>>b052,at the end she will end up with balong error,so his restart phone and from there the phone wont boot up,not even in recovery,so what is the problem????
Click to expand...
Click to collapse
charge battery. check if bootloader is unlocked correctly ( connect device to pc -> hold volume down while powering up)
open console and type
Code:
fastboot oem get-bootinfo
you should get this
Code:
...
(bootloader) unlocked
OKAY [ -0.000s]
finished. total time: -0.000s
if that's the case...
install Twrp 3.0.2
boot into twrp (volume down and volume up while powering on)
wipe everything (dalvik/cache/data/system/internal)
unbrick.
to make everything easier here is a thread.
take those files. it's all prepared (just click once )
also sorry for the noob explaining. you probarly are wellkown with android but it's a custom by now
---------- Post added at 19:19 ---------- Previous post was at 18:59 ----------
btw your problem is that you flashed the custom.img before the recovery it should be in this order.
boot.img
recovery.img
cust.img
system.img

Lordbannakaffalatta said:
Balong bug -> make sure your 1 on the right location or 2 install the vendor file from your build (vendor MM should do)
charge battery. check if bootloader is unlocked correctly ( connect device to pc -> hold volume down while powering up)
open console and type
Code:
fastboot oem get-bootinfo
you should get this
Code:
...
(bootloader) unlocked
OKAY [ -0.000s]
finished. total time: -0.000s
if that's the case...
install Twrp 3.0.2
boot into twrp (volume down and volume up while powering on)
wipe everything (dalvik/cache/data/system/internal)
unbrick.
to make everything easier here is a thread.
take those files. it's all prepared (just click once )
also sorry for the noob explaining. you probarly are wellkown with android but it's a custom by now
---------- Post added at 19:19 ---------- Previous post was at 18:59 ----------
btw your problem is that you flashed the custom.img before the recovery it should be in this order.
boot.img
recovery.img
cust.img
system.img
Click to expand...
Click to collapse
i have try with many firmware(extract files from update.app)but,none was work,every time the same error,I think it might be a problem with the partition,or maybe if i can find someone with version c113b130 and try to flash boot an recovery i will have a chance

cristi.blidariu said:
i have try with many firmware(extract files from update.app)but,none was work,every time the same error,I think it might be a problem with the partition,or maybe if i can find someone with version c113b130 and try to flash boot an recovery i will have a chance
Click to expand...
Click to collapse
it goes the same way.
as i told you try installing twrp first wipe everything and then flash it but do it in the order i gave you.
first boot.img
second recovery.img
third cust.img
fourth system.img
this problem occured before. (cant find the thread anymore) but it should work.
and the way is see it you have nothing to lose at this point so

I also told him that. Usually when I flash a rom I also flash recovery before custom, but for no reason at all haha didnt know it could cause a bootloop if done cust before recovery :/

pilililo2 said:
I also told him that. Usually when I flash a rom I also flash recovery before custom, but for no reason at all haha didnt know it could cause a bootloop if done cust before recovery :/
Click to expand...
Click to collapse
K,thanks for the point,it no mater wich order i flash files,the problem is the boot partition wich meen that i am not able to boot in recovery(not even in stock revcovery)i have try to wipe data by using command fastboot -w and press enter but he gave me command not alowed
Sent from my ALE-L21 using XDA-Developers mobile app

pilililo2 said:
I also told him that. Usually when I flash a rom I also flash recovery before custom, but for no reason at all haha didnt know it could cause a bootloop if done cust before recovery :/
Click to expand...
Click to collapse
Yeah i'm not sure eather but they use to hammer this into us that it become an OCD thing for me
and it wwas the only thing i could see what was wrong.
cristi.blidariu said:
K,thanks for the point,it no mater wich order i flash files,the problem is the boot partition wich meen that i am not able to boot in recovery(not even in stock revcovery)i have try to wipe data by using command fastboot -w and press enter but he gave me command not alowed
Sent from my ALE-L21 using XDA-Developers mobile app
Click to expand...
Click to collapse
weird that's mostly the case when your bootloader is locked. altough it says PHONE unlocked" it isn't always the case. what do you get when you type
fastboot oem get-bootinfo
could you post it?
rip? http://forum.xda-developers.com/showthread.php?t=2456665
it's with the P6 i know but... those are the same symptones

Lordbannakaffalatta said:
Yeah i'm not sure eather but they use to hammer this into us that it become an OCD thing for me
and it wwas the only thing i could see what was wrong.
weird that's mostly the case when your bootloader is locked. altough it says PHONE unlocked" it isn't always the case. what do you get when you type
fastboot oem get-bootinfo
could you post it?
rip? http://forum.xda-developers.com/showthread.php?t=2456665
it's with the P6 i know but... those are the same symptones
Click to expand...
Click to collapse
i run command fastboot oem get-bootinfo and show bootloader unlock