Related
Just got the diamond2 and am loving it. Came from the touch pro. Problem is I have been pocket dialing while its in my leather case. This is not good, as I am a real estate salesperson and it is calling some important people. Does anyone have a solution? BTW, I was using touch lock pro on the touch pro.
Thanks!
hi lorettaboy
you should lock the kets by holding the end call button for a few seconds and that should sort your problem out
I forget what it's called but there is this locking software that will completely lock the phone if you rotate it around the long axis one way and unlock if you do the same the other way.
I have been using throttle lock though. It is like the Android unlock screen where you draw patterns.
If u press the power on/off button for a second, the screen goes off.....isnt it ok to avoid your problem?
Kinto said:
If u press the power on/off button for a second, the screen goes off.....isnt it ok to avoid your problem?
Click to expand...
Click to collapse
I think what may be happening is that the power button is being pressed while in the case unlocking the phone and keys. I had this happen before and still does sometimes when in my pocket.
4 characters: S2U2
Hoping wm6.5 features a lock that's as functional as S2U2.
I personally use http://pocketshield.netserver01.com/ It locks your phone when its closed, and you have different ways to 'wake' it. the 3 that I set it currently is:
1. if the phone is in the case (aka dark) it will not unlock even if phone is ringing, but once you remove it from the sleeve/pouch it will be unlocked.
2. If its night time and the above prevents you from unlocking in the night, shaking phone left to right once will unlock it
3. lastly if I take out stylus it will unlock.
lorettaboy said:
I was using touch lock pro on the touch pro.
Click to expand...
Click to collapse
Googled it, light sensor lock sounded interesting, tested it. Never got the light sensor unlock to work. Had to keep tapping the lock button for a varying number of times to unlock. But worse: got catch-22-ed twice within ten minutes.
The first time I got caught with the screen on, the 'turn off' dialog active, and Touch lock Pro active but not clickable because of the turn off dialog. No way to unlock the device and the power button was hijacked by Touch Lock Pro. Removed back cover, took out battery and restarted.
The second time the device locked with the screen off, and the power button couldn't turn the screen on again. No way to find out what happened this time. Removed back cover, took out battery and restarted.
This tool is possibly the least compatible tool with the TD2 you will ever find
Hello,
I just got a Captivate from AT&T, quickly I found that i need to press the lock key tens of times a day as I set display off at 30 sec.
Unblocking the phone does not bother me but I am concern if this sooner than later will break the lock button, so I would like to hear your comments with the 15 days I have to return the phone.
Also, is there any app that let me turn off the screen and re-activate the phone just touching the screen.
Thanks
Maybe try an application called Screebl?
It won't activate the screen when you touch it, but it will keep it alive while you're holding you're phone. So you can set your screen timeout to 15 seconds, but while your phone is tilted a certain way, it'll keep the screen on. It'll at least save you the need to push the power button to turn the screen back on while you're using it.
You might also be able to use Tasker to wake up the screen when the phone detects motion or held a certain way (but i'm not too sure about this)
aletsm said:
Hello,
I just got a Captivate from AT&T, quickly I found that i need to press the lock key tens of times a day as I set display off at 30 sec.
Unblocking the phone does not bother me but I am concern if this sooner than later will break the lock button, so I would like to hear your comments with the 15 days I have to return the phone.
Also, is there any app that let me turn off the screen and re-activate the phone just touching the screen.
Thanks
Click to expand...
Click to collapse
I had an iphone for 2 years and pressed the home key for everything... on and home - so I am not to worried about the captivate.
Thanks for the comments
"no lock" on the market can disable the lock screen so that you can unlock with just the button. There is also a setting for the time before the screen turns off, I find one minute much better than thirty seconds.
Sent from my SAMSUNG-SGH-I897 using XDA App
I may be missing it but was hoping for a way that you could set the phone's screen to go off after X amount of time (say 1 minute) but still be able to just press the lock button to turn it back on), but for it to turn off and also passcode lock after Y amount of time (maybe 5 minutes) so that you don't have to either have the passcode lock off completely or on completely, but set on a certain amount of time...
I probably just made no sense, lol
Brynn85 said:
I may be missing it but was hoping for a way that you could set the phone's screen to go off after X amount of time (say 1 minute) but still be able to just press the lock button to turn it back on), but for it to turn off and also passcode lock after Y amount of time (maybe 5 minutes) so that you don't have to either have the passcode lock off completely or on completely, but set on a certain amount of time...
I probably just made no sense, lol
Click to expand...
Click to collapse
you mean just like the iphone where passcode doesn't kick in till after the phone's screen has been off for a certain period of time (that you pick in settings).
n19htmare said:
you mean just like the iphone where passcode doesn't kick in till after the phone's screen has been off for a certain period of time (that you pick in settings).
Click to expand...
Click to collapse
Ummm yep, that's pretty much what I mean
If possible this would be great!
There is an app called lock delay in the market that will do what you are looking for.
Sent from my SAMSUNG-SGH-I897 using XDA App
Ooh, any idea how it interacts with no lock? I think I'll try it and see.
Sent from my SAMSUNG-SGH-I897 using XDA App
There is an even better app, that does EXACTLY what you are talking about. It's called Pattern Control, it's free from the Market as well. I use it now after trying about 6 different apps. Only problem is, it will NOT work on FroYo.
miztaken1312 said:
There is an even better app, that does EXACTLY what you are talking about. It's called Pattern Control, it's free from the Market as well. I use it now after trying about 6 different apps. Only problem is, it will NOT work on FroYo.
Click to expand...
Click to collapse
Well, I tried Pattern Control, and it does NOT do what I think is being said. On mine it said that since no pattern is set up, it can't do anything.
First we are not talking about the time before the screen dims and goes black. We are talking about the time before the screen goes into lock and requires a swipe (assuming there is no lock code on the phone) to get back to usable screen. Screen indeed may be black, and touch on power button brings up the "Phone locked" screen.
We want to be able to set the time before THAT lock happens to be longer. Ok if screen goes to black as set in Settings>Sound and Display>Screen Timeout, but we want it to still be unlocked (until the lock time we set is reached) so that when brought back to life before the lock time expires, no swipe is needed.
So, I downloaded and launched it perfectly... everything so far i tried is working fine except the lock screen... Some times when i press the Cancel key the button lights lid up but there is nothing on the screen and sometimes it appear the lock screen but nothing happen....
Do someone have any solution to this...
Thank you.
I have the same problem. I have been reading that possibly going back to an older kernel / roofs fixes this problem but have not seen and confirmed reports.
Can anyone confirm this and what version?
Thanks
Same problem at me. Both builds are running very fine for some tine but after that are running slow.I don't know why. Maybe is somehow related with the lockscreen problem?
I have this problem as well i get lucky if i manage to move passt the lock screen and the OS runs really slow it takes like 20 seconds just to open the app screen and the app screen laggs like no to morrow how come so menny ppls can get it to run just fine but i cant it makes me sad face
+1 one for me... I have got a TOPA100, it's almost impossible to wake up the device, sometimes the lockscreen is visible, but it's impossible to move the unlock slider. Usually I need about 10 times and something around 5 Minutes to wake up the device.
Same problem here, would be great if this can be fixed...
RaZz0r12 said:
I have this problem as well i get lucky if i manage to move passt the lock screen and the OS runs really slow it takes like 20 seconds just to open the app screen and the app screen laggs like no to morrow how come so menny ppls can get it to run just fine but i cant it makes me sad face
Click to expand...
Click to collapse
For me it's the same and the battery runs only for one hour, I think a (system?)process is running with 100% CPU time. I am new to android, so I don't know where to look.
Same here on an AT&T Pure. Sure would love to get this fixed however I'm reasonably noob to the Android world (not completely novice to linux in general, and I have successfully flashed my AT&T TyTN II thanks to this site.) Fixing this would be a huge help!
Thanks
More specifically on my device I encounter. The following:
- Turn screen off via end button.
- Turn on screen via call button.
HW button lights come on for a few seconds then cut themselves off.
Screen does not turn on at this point.
- Turn on screen via call button again
- Screen comes on with HW button lights
about half the time screen is unresponsive and will not all me to unlock with swipe of finger
Other times will accept input and unlock to the home screen
When unresponsive repeating entire process above will likely allow me to unlock successfully.
Thanks!
Sent from my AT&T Pure using XDA App
same
my screen never wakes up
end up using soft reset to windows mobile
(it could be something to do with startup??)
This is driving me crazy!
I've set the Z3 Compact to tap to wake - a feature I like very much - but I'll often pull out the phone to see that it's taken loads of pictures of my pocket. And my pocket really isn't that interesting.
I've tried changing the password from a pattern to a PIN thinking that maybe I was somehow unlocking it that way, but I figure I must somehow be knocking the camera icon on the lock screen and it seems the only way I can remove that from the lock screen also stops the physical button working too.
So has anyone any ideas on how can I fix this and (a) keep the physical camera button working and (b) keep using tap to lock? Thanks.
Are you locking the phine pefore putting it in your pocket or just letting it sleep?
I had mine set to lock 30 seconds after pressing the side button to sleep it and was ending up with pocket texting and calls and pictures. Set it to lock instantly with button press and have not had any issues. Maintained 30 seconds after sleep for regylar locking.
Sent from my D5803 using XDA Free mobile app
You are probably hitting the dedicated camera button on something. A full depression will wake the phone and the next one will take a picture. Doesn't matter if the phone is locked etc.
try to disable the dedicate button for camera.. in camera options
As suggested here deactivate waking up the camera with the dedicated camera button. I had that problem to until i deactivated that.
Get rid of the skinny jeans
Non rooted, T mobile branded 3 month old note 8. No water damange, no drops etc.
Using chrome one miniute, set the phone down to watch a movie on my tablet, picked up the phone to check messages and boom. Screen is off. The phone works, I can even answer calls because I know where the answer button is on the screen, haptic feedback works, all indicator lights work. The phone screen remains off.
Tried a soft reset (tried hard reset too the best I could being I cant see the screen) and the phone seems to reset based on the vibration and indicator light patters but the screen remains off. It's as if a physical connection between the screen and the brains of the phone has been severed. Literaraly the weirdest thing that has happened to me in a decade of Android phone ownership.
Googled all the black screen issues with these phones and most of them are resolved with just a soft reset... some said that the phone is in it's lowest dimmed state and go to a dark room and i'll see it faintly and then can increase brightness... no luck...
Has anyone experienced this?
I would say it's a warranty job, just tried turning my brightness to zero and you can still see the screen.
I did have a similar problem on an old note that had root and custom rom though but I had somehow set the volume rocker to control brightness and it had lowered itself to minimum in my pocket
KEVIN88GT said:
Non rooted, T mobile branded 3 month old note 8. No water damange, no drops etc.
Using chrome one miniute, set the phone down to watch a movie on my tablet, picked up the phone to check messages and boom. Screen is off. The phone works, I can even answer calls because I know where the answer button is on the screen, haptic feedback works, all indicator lights work. The phone screen remains off.
Tried a soft reset (tried hard reset too the best I could being I cant see the screen) and the phone seems to reset based on the vibration and indicator light patters but the screen remains off. It's as if a physical connection between the screen and the brains of the phone has been severed. Literaraly the weirdest thing that has happened to me in a decade of Android phone ownership.
Googled all the black screen issues with these phones and most of them are resolved with just a soft reset... some said that the phone is in it's lowest dimmed state and go to a dark room and i'll see it faintly and then can increase brightness... no luck...
Has anyone experienced this?
Click to expand...
Click to collapse
Try pressing and holding Volume down and power button for 5 to 7 seconds to force power off, then try to boot to download mode Volume Down + Bixby + Power button and see if the download mode screen shows......if not then probably a bad screen.
Sent from my God Mode 8
Tried it......nothing.....warranty job it is.... Bummed to have some refurnished phone in exchange for a Brand new 900 dollar phone just a few months back?
KEVIN88GT said:
Tried it......nothing.....warranty job it is.... Bummed to have some refurnished phone in exchange for a Brand new 900 dollar phone just a few months back?
Click to expand...
Click to collapse
Yeah that sucks, i can imagine..... i too hate the idea of refurbished units being swapped for warranty....bs, should be brand new unit!
Sent from my God Mode 8
so I had it replaced under warranty through T mobile. Refurb phone will come in today. One quesion. Should I let the Tmobile techs do the data/settings transfer from old phone to new one or just do everything myself from scratch (which will obviously take longer).
This happened to my phone twice for the past month or so. (both in Nougat and Oreo - Non rooted) Black screen but phone seems to be responding -- I can receive calls and notifications etc -- And force reboot doesn't fix it. I've also tried drainging the phone when it first happened to me but doesn't work. HOWEVER, it gets okay so randomly. Like I just left it for couple of hours and it just worked when I hit the power button.
I did tried bringing the device to Samsung but what they did is to just manually upgrade/reset the software in their end which I could have done in my part but I just let them do it. They told me to come back if it happens again which is kinda BS.
I can conveniently say this is a Hardware issue. I will wait for it to happen again on my phone and request for a replacement. Phone is 4 months old when it first happened.
I have the same issue with blank screen but phone is working.
It started couple of weeks after i dropped my phone on the ground. There is black dot on my screen and broken glass but phone was working ok and was still pretty usable. But then it started:
Display works fine but when i switch display of, lock the phone or display switched because of its timer it didn come switch on... But phone works, i can use it with blank (black) screen.
I had to do force restart so the display will turn on with samsung logo and booting screen, and keep on till another switch of.
I was trying every setting (but no hard reset) and then i found a little hack:
When you turn on the "Always On Display" (AOD) function you can let the screen switch off or do it manually, wait for 1-2 sec and always on display will come up to the screen. Then when you press home button or lock button screen will swtich on normally. YOu can type pin and use phone witch screen working. But when you try to unlock from "AOD" with your finger or your eyes it unlock but with screen black.
So i was using it like this. everytime you need to wait second untill AOD comes up, but it was working fine.
Problem nu 2 is that now it stop working, AOD is working but when i want to switch screen on from AOD it shows black screen and phone is working on blind.
So everytime after my screen goes black or to AOD i have to unlock the phone blindly and "Force restart" it and have to keep waiting until boot, and then have to never let phone to screen of.
Its not usuable.
¨
Now what do you think? Is it hardware problem or software problem? Because screen is working but randomly. The black dot of dead pixels on the screen is getting slightly bigger in time (about 1 year) but its like 1.5cm round. Maybe this cause the problem? And why hack with AOD was working for half a year and then stoped working? There wasnt any updates right before, but i tried to install some apps (non display related) so ill try to uninstall them.
Hawe you got any idea if i can repair it on my own even if i loose the waterproofability?
Or can it be replaced for free if i have a warranty? (I dont have insurance)
Thanks for your tips guys.
Reprocrastinator said:
I have the same issue with blank screen but phone is working.
It started couple of weeks after i dropped my phone on the ground. There is black dot on my screen and broken glass but phone was working ok and was still pretty usable. But then it started:
Display works fine but when i switch display of, lock the phone or display switched because of its timer it didn come switch on... But phone works, i can use it with blank (black) screen.
I had to do force restart so the display will turn on with samsung logo and booting screen, and keep on till another switch of.
I was trying every setting (but no hard reset) and then i found a little hack:
When you turn on the "Always On Display" (AOD) function you can let the screen switch off or do it manually, wait for 1-2 sec and always on display will come up to the screen. Then when you press home button or lock button screen will swtich on normally. YOu can type pin and use phone witch screen working. But when you try to unlock from "AOD" with your finger or your eyes it unlock but with screen black.
So i was using it like this. everytime you need to wait second untill AOD comes up, but it was working fine.
Problem nu 2 is that now it stop working, AOD is working but when i want to switch screen on from AOD it shows black screen and phone is working on blind.
So everytime after my screen goes black or to AOD i have to unlock the phone blindly and "Force restart" it and have to keep waiting until boot, and then have to never let phone to screen of.
Its not usuable.
¨
Now what do you think? Is it hardware problem or software problem? Because screen is working but randomly. The black dot of dead pixels on the screen is getting slightly bigger in time (about 1 year) but its like 1.5cm round. Maybe this cause the problem? And why hack with AOD was working for half a year and then stoped working? There wasnt any updates right before, but i tried to install some apps (non display related) so ill try to uninstall them.
Hawe you got any idea if i can repair it on my own even if i loose the waterproofability?
Or can it be replaced for free if i have a warranty? (I dont have insurance)
Thanks for your tips guys.
Click to expand...
Click to collapse
If you're under warranty it will likely be a free repair, unless they find other damage. Like moisture damage.
As far as fixing it yourself, it's just about as cheap to have Samsung do it than it is to buy the parts yourself. It's $229 for Samsung to do it, and you'll maintain the water resistance rating.
same has happened to me
KEVIN88GT said:
Non rooted, T mobile branded 3 month old note 8. No water damange, no drops etc.
Using chrome one miniute, set the phone down to watch a movie on my tablet, picked up the phone to check messages and boom. Screen is off. The phone works, I can even answer calls because I know where the answer button is on the screen, haptic feedback works, all indicator lights work. The phone screen remains off.
Tried a soft reset (tried hard reset too the best I could being I cant see the screen) and the phone seems to reset based on the vibration and indicator light patters but the screen remains off. It's as if a physical connection between the screen and the brains of the phone has been severed. Literaraly the weirdest thing that has happened to me in a decade of Android phone ownership.
Googled all the black screen issues with these phones and most of them are resolved with just a soft reset... some said that the phone is in it's lowest dimmed state and go to a dark room and i'll see it faintly and then can increase brightness... no luck...
Has anyone experienced this?
Click to expand...
Click to collapse
This has just happened to my note 8 too. I was about to update it and had started it. set my phone down and picked it up and phone screen is black but can hear the haptic feedback.
I can only see the lock screen and the notifications. Everytime I try to unlock my phone I only get to see a glimpse of the notescreen and then the screen turns black. Even when I try to go to camera through the lock screen the screen goes black too. When I charge my phone it heats up so I haven't really charged it as well. Has this also happened to anyone? It seems as if the phone's sensitivity still works in all places but when I unlock it the screen just goes black.
I also have problem of freezings and always rebooting. Tried soft and hard resets/factory reset. Still same problem. This phone has hardware issue. Do not buy.
I realize this thread is quite old but I have this exact same issue now. I have managed to discover some other information by playing around with various settings which are noted below. To begin with, I was able to used the AOD hack posted above for a while but it no longer works. The only way I can get my screen to come back is with a soft reset - but as soon as the screen times out or i turn it off, it goes black, with or without AOD enable. All the on screen buttons still work as well as the haptic feedback - I just can't see anything.
Now on to what I have found:
One thing I have found is if I turn off adaptive screen brightness and crank the brightness slider to the right, when it goes black I can faintly see some of the buttons - enough that I can turn the phone off or restart it from the power menu (If I switch the default setting to night that also helps to see the buttons a bit better). Also, if I enable night mode I can also see the brightness slider faintly but when I slide it left, it just makes the screen completely black and when I slide it right, it only returns it to the very faint brightness level.
So at this point I am stuck. To summarize the issue:
1. When the screen either times out or turns off, it is still "alive" but goes black. It will not return to normal brightness.
2. Turning off adaptive brightness and cranking brightness slider to right allows you to see faint buttons after screen times out but won't return to normal brightness.
3. Enabling night mode helps to see the faint buttons, in particular the brightness slider a bit better. However the screen still cannot return to normal brightness.
4. The only way to get the screen back to full brightness (albeit temporarily until the next timeout) is to turn off the phone or reset from the power menu; or soft reset holding volume down + power simultaneously.
Hopefully someone else has figured out a way to recover this. I am on Android 9 with Samsung UI 1.0
Phone is completely stock, never rooted and completely out of warranty.