[Q] Cannot install any other .zip than original CyanogenMod - HTC Vivid, Raider, Velocity

I had a friend help me with my CyanogenMod 10 install and everything was working fine. Now knowing how to get the boot.img and .zip installed, I thought I would try a few other ROMs as I see there is already a 4.2.2 (I had installed 4.1.2).
I did a wipe of data, cache, d.cache, system
I flashed new boot.img of CM 10.1 (http://forum.xda-developers.com/showthread.php?t=2343586)
I went into recovery to install the .zip and I got "E:Can't open /sdcard/cm-xxxxxx.zip (bad)"
I thought, okay **** it I'll just go back to 4.1.2 and it installs perfectly fine - gets me back into the phone. I even tried a different ROM from SlimBean or whatever and I get the same "(bad)"
What gives?

Seems like my SD card needed to be swapped out -- not sure why but works fine on a different card. I'll try formatting the other one..

Which recovery are you using? Btw make sure you are flashing the correct version of gapps right after flashing the rom zip

Related

Upgrade to ICS stuck in boot loop...

Trying to install the Cynogen ICS ROM, and when installing the .zip, it loads the Samsung flash screen with Cynogen, then get the green guy and loads of text for about half a second, then it just reboots. Over and over for about 10 mins. WHat went wrong? What should I do?
It happend the same to me.
I just removed the battery and put it back, entered in CWM and reinstalled the ROM.
Good luck!
I somehow got into a recovery mode, but with the assumption it would all go wrong again, tried to install the .zip Darky rom instead, went through the process and said it worked but then it just went back to the Cynogen loop problem!? I just tried a Restore instead, but I haven't rebooted yet, should I wipe everything again, and try the ICM .zip again?
Yep, just go with the whipe. I hope you did a backup.
OK turns out the Restore failed, so now trying to reinstall ICS .zip again. fingers crossed!
yep backed it up, not that its seems to have helped.
Well now it's stuck in the Galaxy S bootscreen...
that really sucks....did you deactivated the lagfix before running the rom?
If the problem persists you have to run a basic ROM using ODIN.
Yes deactivated the lagfixI can't get into recovery or anything now, except download mode.
Download mode is all you need to run a ROM with Odin.
I recommend Amestris, it is a good ROM, good battery life but the thread in not complete, there are some files missing...for now.
I've put some older ROM on I had, then tried to install ICS again but now when I use Clockwork, and select the file it goes to recovery but I can't select any zip files, just reboot back to this awful old ROM!
I had same issue when I installed ics, what I did that worked was pull battery and go back into cwm, reflashed ics zip and it fully installed that time. Had same experience when flashing cm7 before.
Not getting anywhere with this. I get an option to install zip from sdcard which is where the update is (an where the darky update also is which worked), but there is an option to update from internal SD, which is not where the file is. Is it in the wrong place?
I think you would be best to use Odin 1.3 to flash DarkyROM Ficeto JVT base rom.
are you sure those files are still on your sd card?
The reason you need to pull the battery and reflash the ICS rom a few times is because Samsung ROM (most) have a different partition layout to CM7 based roms (which the ICS port is one).
GL.

Weird problem when flashing CM7 Help!

Hi,
I have many times tried to flash CM7, but always happens weird thing.
I have stock 2.3.5 XXJVS with Semaphore 2.5.0 kernel
1.I boot into CWM
2.I wipe cache then wipe data/factory reset then i go advanced and choose wipe Dalvik cache
3.Choose .zip from sd card
4.I choose update-cm7.1.0-GalaxyS-signed.zip
5.My phone flashes it
6.It reboots
7.Normal Galaxy S GT-i9000 then Galaxy S
Cyanogen Mod
8.It goes to recovery and posts text very fast then reboots again
9.It repeats everything what it does from section 7.
Im very confused so please help!
Have you tried flashing it again?
redo step 3 and onwards,
sometimes you just need to flash twice.
It seems like a corrupted download... Are you flashing from internal or external? Have you mounted before?
i tried to flash from internal
What version of CWM recovery do you have? Maybe flash a different ROM just to update CWM, and then flash the rom you want?
I had the same, or atleast a similar problem whilst trying to flash CM9. I fixed it by flashing the rom again.
You also might want to redownload the file incase it's corrupt.
i have CWM 5.0.2.7 and i downloaded the CyanogenMod file again so i try to flash it again
Any luck with your efforts this far?
yes, i succesfully installed CM9 about 3 months ago.
I'm not sure which build it was but it was the newest build

HELP! - Stuck booting to Recovery after trying to flash CM10 :(

Hi,
I flashed my GT-i9000 (Firmware was Gingerbread BUJVY) using CF Root (CF-Root-XW_NEE_JVH-v3.2-CWM3RFS.tar) through ODIN.
All worked fine and I was able to boot into Recovery using the regular Volume Up+Home+Power.
I then proceeded to flash CM10 nightly (23/9/12) (from my external Micro SD card) by wiping data, wiping cache and wiping Dalvik Cache.
I then navigated to the zip file for CM10 and run it. It started ok then qiuckly the phone rebooted and rebooted into a newer version of CWM (6.0.1.4).
From here I cannot do anything at all!! It won't recognise my Micro SD now to even run the installation again
I'm hoping someone may be able to help, I would really appreciate it!
TIA!
zim_zimmer said:
It started ok then qiuckly the phone rebooted and rebooted into a newer version of CWM (6.0.1.4). From here I cannot do anything at all!! It won't recognise my Micro SD now to even run the installation again
Click to expand...
Click to collapse
Do you know what version is your Firmware? is it 2.3.3 or 2.3.6?, IF its 2.3.3 your boot loader needs to be updated to 2.3.6 for you use , If its already 2.3.6, than you should be able to use CWM recovery to reinstall the CM 10 from your SD card. (But by doing this you may lose your IMEI as you should do a progressive upgrade , like from GB 2.3.6>ICS CM9>JB) or flash a semaphore JB kernel
Easiest way out would be for you to use a JVU ROM to recover, safe your EFS, than proceed to CM 9 and than to CM 10...
you can get a rescue kit or JVU+CFRoot from My Android Collections and or a solution from My Android Solutions
Hi there,
I was on Gingerbread 2.3.6 before I ran the above.
I have gotten a bit further than the above. I managed to mount the phone as a USB whilst in CWM and put the CM10 zip file on the actual phone memory. I then wiped data/cache/dalvik and rerun the install. It installed but didn’t reboot itself, so I rebooted manually and then the Cyanogenmod logo started up and it booted into CM10. Looked ok apart from the Home Button didn’t work!!
Do you think I should still run the above??
Rooting this phone and flashing ROMS is more difficult than my Galaxy S3!!
Cheers
zim_zimmer said:
Looked ok apart from the Home Button didn’t work!!
Do you think I should still run the above??
Click to expand...
Click to collapse
Since you are already on CM 10, you need to solve your home button problem, try doing a wipe in recovery, if fails, flash again the CM 10
Hmmm, it didn’t work.
What I’ve done since though is try to flash another ROM.
I’ve flashed the ‘xBean’ ROM with success, however, I did encounter the exact same problem when flashing the ROM as mentioned above
I wiped data/cache/dalvik and run the install for xBean. It stopped after the first install attempt and rebooted itself, however it just brought me back to the CWM screen (although this time different from the CM CWM).
So I wiped data/cache/dalvik, then run the install again. This time it went through the full install but again (like with CM) it didn’t rebooted automatically. I manually rebooted and then the xBean logo came up and booted in.
This time the home button is working, and pretty much everything else is too by the looks of it. So far so good!
I guess my question would be, why does the ‘ghost installs’ keep happening???

[Q] CWM Error - Status 7

Hello Folks,
First I have to say that I watched the noob video and read everything about E:Error in /mnt/sdcard/cm-10.0.0.-galaxysmtd.zip (Status 7) on this forum and what google gave me.
My situation:
PC OS is Windows 7 64bit (if someone needs to know)
Phone:
Samsung Galaxy S GT-I9000
SSN: I9000GSMH
What happend:
I bought a used phone about two months ago with latest installed stock rom 2.3.5 it is. Then i downloaded cm-10-20121126-NIGHTLY-galaxysmtd and followed the instructions on wiki.cyanogenmod.org/wiki/Samsung_Galaxy_S:_Full_Update_Guide. I installed CWM with Heimdall Suite. Everything worked well.
Today I decided to install a newer version of CM, I downloaded the cm-10-20121210-NIGHTLY-galaxysmtd and cm-10.0.0-galaxysmtd and copied them both on the phone memory. I turned off the phone and turned it on in recovery mod, and I got the recovery mode that was on cm-10-20121126-NIGHTLY-galaxysmtd installed. It wasn't the standard CWM that I installed with Heimdall Suite. I wiped with it data and cache and installed cm-10-20121210-NIGHTLY-galaxysmtd and then rebooted the phone. But the phone got stuck and didn't want to reboot. So i tried to go to recovery mod again to reinstall the cm-10.0.0-galaxysmtd but the phone couldn't access the recovery mod anymore.
After that I reinstalled with Heimdall Suite the ClockwordMod Recovery v2.5.1.0 SpeedMod Kernel like the first time I did. and successfully booted to recovery mod and again wiped cache and data and tried to install cm-10.0.0-galaxysmtd when i got the error
This is the image, just copy/paste in address bar.
imageshack.us/f/685/07032008448.jpg
So, now my phone has no OS installed.
There are some other issues too, I can't mount my external sd card in CWM, why, I don't know, so I only have cm-10-20121210-NIGHTLY-galaxysmtd and cm-10.0.0-galaxysmtd on my phone memory to install.
I would really really like if someone could help me to solve my problem, I have no other phone. And please when you tell to install something give me the needed link because I really downloaded a lot of things that didn't work.
adobih said:
Hello Folks,
First I have to say that I watched the noob video and read everything about E:Error in /mnt/sdcard/cm-10.0.0.-galaxysmtd.zip (Status 7) on this forum and what google gave me.
My situation:
PC OS is Windows 7 64bit (if someone needs to know)
Phone:
Samsung Galaxy S GT-I9000
SSN: I9000GSMH
What happend:
I bought a used phone about two months ago with latest installed stock rom 2.3.5 it is. Then i downloaded cm-10-20121126-NIGHTLY-galaxysmtd and followed the instructions on wiki.cyanogenmod.org/wiki/Samsung_Galaxy_S:_Full_Update_Guide. I installed CWM with Heimdall Suite. Everything worked well.
Today I decided to install a newer version of CM, I downloaded the cm-10-20121210-NIGHTLY-galaxysmtd and cm-10.0.0-galaxysmtd and copied them both on the phone memory. I turned off the phone and turned it on in recovery mod, and I got the recovery mode that was on cm-10-20121126-NIGHTLY-galaxysmtd installed. It wasn't the standard CWM that I installed with Heimdall Suite. I wiped with it data and cache and installed cm-10-20121210-NIGHTLY-galaxysmtd and then rebooted the phone. But the phone got stuck and didn't want to reboot. So i tried to go to recovery mod again to reinstall the cm-10.0.0-galaxysmtd but the phone couldn't access the recovery mod anymore.
After that I reinstalled with Heimdall Suite the ClockwordMod Recovery v2.5.1.0 SpeedMod Kernel like the first time I did. and successfully booted to recovery mod and again wiped cache and data and tried to install cm-10.0.0-galaxysmtd when i got the error
This is the image, just copy/paste in address bar.
imageshack.us/f/685/07032008448.jpg
So, now my phone has no OS installed.
There are some other issues too, I can't mount my external sd card in CWM, why, I don't know, so I only have cm-10-20121210-NIGHTLY-galaxysmtd and cm-10.0.0-galaxysmtd on my phone memory to install.
I would really really like if someone could help me to solve my problem, I have no other phone. And please when you tell to install something give me the needed link because I really downloaded a lot of things that didn't work.
Click to expand...
Click to collapse
you having the wrong CWm installed, you can go to this link to download the cf-root kernel. http://forum.xda-developers.com/showthread.php?t=788108 hope this will help .
BTW when flashing JB from GB you need to flash CM9 then follow by CM10, if you can try flash it from GB 2.3.6 (E.g xxjvu)
i try flashing JB from GB is work if i flash twice but i got missing IMEI. so i suggest you following this step to flash.
GB(stock rom with ROOT) - ICS(CM7) - JB(CM10)
Samtan4326 said:
you having the wrong CWm installed, you can go to this link to download the cf-root kernel. http://forum.xda-developers.com/showthread.php?t=788108 hope this will help .
BTW when flashing JB from GB you need to flash CM9 then follow by CM10, if you can try flash it from GB 2.3.6 (E.g xxjvu)
i try flashing JB from GB is work if i flash twice but i got missing IMEI. so i suggest you following this step to flash.
GB(stock rom with ROOT) - ICS(CM7) - JB(CM10)
Click to expand...
Click to collapse
First off all thanks for helping.
I tried this one:
CF-ROOT-4.4-I9000BGJW5-1187857
CF-Root-4.4-I9000BOJW6-CL1177078
CF-Root-JP6-v1.2-Busybox-1.17.1 (this one didn't want to start recovery at all)
CF-Root-XX_OXA_JW4-v4.4-CWM3RFS
all I got from all of them is this
imageshack.us/f/805/08032008449.jpg (copy link to address bar )
Member Chainfire said "THIS IS NOT A ROM - it is only a kernel. You need to have a firmware already on your device"
I don't know really what that means. Probably that I have to install something else too, but what ?
Please can you tell me ?
And which of these CF-Roots is the right one, or the newest one, or how do recognize that ?
Thanks everyone who helps me.
eba
Well, I solved my problem, now i have cm-10.0.0-galaxysmtd ROM installed. If someone has this problem, this is one way how to solve it (but doesn't mean it's the best one).
If you have no ROM installed on your I9000 and don't know which kernel to use, try this way:
Watch this video on YouTube that user "Puggered UK" uploaded:
youtube.com/watch?v=iRnH13sRAIc
- You can skip to 1.52 because you don't have any ROM on your phone, and download the EZ Odin package from the link in the About section (4shared.com/archive/TuHUfVjA/EZOdin.html).
- Start EZ Odin, put the PIT, PDA, PHONE and CSC file in the right box, connect your phone in download mode to the PC and press START, and wait till the process is complete.
- After a while you should have Android 2.3.? installed on your phone.
- Update Google market to Google play, then update ROM Manager, and start ROM Manager. Choose to Flash Clockwork Mod Recovery, choose your phone and flash it.
- Copy on your internal sd memory cm-10.0.0-galaxysmtd that you downloaded from CyanogenMod web site.
- Restart your phone in Recovery mod, wipe data/cache, and install cm-10.0.0-galaxysmtd from internal sd card.
- Then, when it's done restart the phone, and do the last step again in Cyanogen CW recovery.
- After it's done, restart the phone and you will have CM 10 on your phone installed.
Or just watch the video and you will se what to do.
adobih said:
Well, I solved my problem, now i have cm-10.0.0-galaxysmtd ROM installed. If someone has this problem, this is one way how to solve it (but doesn't mean it's the best one).
If you have no ROM installed on your I9000 and don't know which kernel to use, try this way:
Watch this video on YouTube that user "Puggered UK" uploaded:
youtube.com/watch?v=iRnH13sRAIc
- You can skip to 1.52 because you don't have any ROM on your phone, and download the EZ Odin package from the link in the About section (4shared.com/archive/TuHUfVjA/EZOdin.html).
- Start EZ Odin, put the PIT, PDA, PHONE and CSC file in the right box, connect your phone in download mode to the PC and press START, and wait till the process is complete.
- After a while you should have Android 2.3.? installed on your phone.
- Update Google market to Google play, then update ROM Manager, and start ROM Manager. Choose to Flash Clockwork Mod Recovery, choose your phone and flash it.
- Copy on your internal sd memory cm-10.0.0-galaxysmtd that you downloaded from CyanogenMod web site.
- Restart your phone in Recovery mod, wipe data/cache, and install cm-10.0.0-galaxysmtd from internal sd card.
- Then, when it's done restart the phone, and do the last step again in Cyanogen CW recovery.
- After is done, restart the phone and you will have CM 10 on your phone installed.
Or just watch the video and you will se what to do.
Click to expand...
Click to collapse
hey,
had that problem too, yesterday. will try your suggestions later and report back!
hope it helps...
Grz
beckzz said:
hey,
had that problem too, yesterday. will try your suggestions later and report back!
hope it helps...
Grz
Click to expand...
Click to collapse
Well, I help you as much as I can and know, just write me where you stuck. And if you have some difficulties explaining it in English, dann kannst du mir auch auf deutsch schreiben, das verstehe ich auch
I had this status 7 thing 2 yesterday while installing cm10. It also seemed I couldnt get into recovery. What I had to do is flash the zip 4 times. First time it got stuck at boot.
So I took battery out & try to get in to recovery (volume up+home button+power button & -->release buttons the moment u see bootanimation<--) but it started bootlooping/got stuck again.
So I took battery out again, did the 3 button combo for the second time & I waited a little longer, a minute maybe 2 & it went to recovery. (I guess the first time it didnt went straight to recovery like it normally does, I wasnt patient enough). If not getting into recovery with waiting the first time just try to keep getting in recovery with 3 button combo & wait a couple of minutes. Eventually it does. I had the same thing 2 months ago coming from jb-->ics-->cm10, thats how I remembered.
Didnt wipe a thing just went straight to the zipfile & flashed it in total 4 or 5 times till it said install completed on the screen. Didnt wipe nothing in between the flashing
Then flashed gapps & voila
Donovan662 said:
I had this status 7 thing 2 yesterday while installing cm10. It also seemed I couldnt get into recovery. What I had to do is flash the zip 4 times. First time it got stuck at boot.
So I took battery out & try to get in to recovery (volume up+home button+power button & release buttons the moment u see bootanimation) but it started bootlooping/got stuck again.
So I took battery out again, did the 3 button combo for the second time & I waited a little longer, a minute maybe 2 & it went to recovery. (I guess the first time it didnt went straight to recovery like it normally does, I wasnt patient enough)
Didnt wipe a thing just went straight to the zipfile & flashed it in total 4 or 5 times till it said install completed on the screen
Then flashed gapps & voila
Click to expand...
Click to collapse
I tried like hundred times or more, but every time with the same result and I also tried with different kernels without success. Maybe some other error caused your status 7 error than mine. But anyway, it's always good to try all possibilities to resolve the problem.
Haha I went crazy not getting into recovery 2 months ago I did it at least 15 times till it eventually got into recovery. Weird cuz I released it the moment I saw cyanogen boot animation. I had to wait a lil longer after releasing so it seems & better timing maybe but only with flashing cm10 from stock. The error was the same tho I saw your picture
Donovan662 said:
Haha I went crazy not getting into recovery 2 months ago I did it at least 15 times till it eventually got into recovery. Weird cuz I released it the moment I saw cyanogen boot animation. I had to wait a lil longer after releasing so it seems & better timing maybe but only with flashing cm10 from stock. The error was the same tho I saw your picture
Click to expand...
Click to collapse
Unfortunately I wasn't that lucky, but I tell you something else. Now I know that no matter what I do and how badly i brick my phone I can always use that method to bring it to life back. So it's kind of final help that works if nothing else works
by the way did you apply sdcard:update zip? Or choose zip from sd card?
Donovan662 said:
by the way did you apply sdcard:update zip? Or choose zip from sd card?
Click to expand...
Click to collapse
I choose zip from sd card because I forgot to rename the file before copying to sd card, and when I lost my bricked my phone it was already to late to rename it. But i don't think that that was the problem, I mean it's just a name string that has no meaning after all.
hey guys,
finally i made it...
thx adobih for your offer, but i'll try to do it in english...think(hope) my english is not that bad
so my problem was the following, slightly different from yours:
i bought a used Galaxy S I9000 for my girlfried as a christmas present cause her Galaxy Ace is the worst Android-phone i ever saw ^^
this "new" Galaxy S has never been rooted before, it never enjoyed a custom ROM - completely stock with 2.2.1 froyo ^^
Here is, what i did to get cm10 stable to work:
1. Updated android to latest official android 2.3.6 with Samsung Kies
2. then i followed the step "Installing the ClockworkMod Recovery" from here
--- ATTENTION: Heimdall 1.3.2 screwed things up (due to a bug i think, only download-mode was available afterwards), use Heimdall 1.3.1 to be safe
3. then i pushed cm 9.1 stable, cm 10.0 stable and latest gapps for 10.0 to the device
4. then i flashed cm 9.1 stable via CWM - an Error occured
5. then i selected "reboot system" in CWM (NOT "reboot recovery"!!)
6. device reboots and starts to install CM 9.1 Stable on its own
7. booted to the now "new" CWM installed by cm 9.1 zip
8. flashed cm 9.1 zip again
8. booted cm 9.1 normally, everything was working fine
9. booted into cwm
10. flashed cm 10.0 zip - an error occured
11. then i selected "reboot system" in CWM (NOT "reboot recovery"!!)
12. device reboots and starts to install CM 10.0 Stable on its own
13. booted to the now "new" CWM installed by cm 10.0 zip
14. flashed cm 10.0 zip again
15. a warning occured "incompatible filesystem, flash again to confirm"
16. flashed cm 10.0 zip again
17. booted cm 10.0 normally, everything was working fine
18. booted CWM again, flashed gapps
19. booted cm 10.0 normally, everything was working fine
I was not able to flash cm 10.0 directly after flashing codeworxs kernel with heimdall. think this is related to changed partition sizes and stuff...
device only booted to CWM again, i was not able to boot the system - bootloop. Once i tried to flash cm10, there was no success when trying to flash cm 9 after that.
i tried it 3-4 times to flash cm 10 directly with no success. i checked md5 sums of the downloaded files, but everything was fine.
the detour with cm 9.1 was the only way to get it to work.
after trying to flash cm10 directly it always screwed something and was not able to get any further.
to start again, i had to go back to stock with odin. For that i used these instructions and files. (its in german, but very well illustrated, so all of you should be able to follow the steps).
When starting from stock, you can follow the steps above and everything should be fine.
took me some hours to figure out the correct order of the steps....
this is a slightly different problem as the one in op, so i decided to provide my solution here.
the heimdall 1.3.2-bug occured with the i9000 of a friend of mine, too. only heimdall 1.3.1 did what it was supposed to.
for all people interested: i decided to flash semaphore kernel for better customization options....running pretty well
EDIT: thx to everybody in this thread posting your experiences, all together it pointed me to the solution.. THX!
Grz
beckzz said:
hey guys,
finally i made it...
thx adobih for your offer, but i'll try to do it in english...think(hope) my english is not that bad
so my problem was the following, slightly different from yours:
i bought a used Galaxy S I9000 for my girlfried as a christmas present cause her Galaxy Ace is the worst Android-phone i ever saw ^^
this "new" Galaxy S has never been rooted before, it never enjoyed a custom ROM - completely stock with 2.2.1 froyo ^^
Here is, what i did to get cm10 stable to work:
1. Updated android to latest official android 2.3.6 with Samsung Kies
2. then i followed the step "Installing the ClockworkMod Recovery" from here
--- ATTENTION: Heimdall 1.3.2 screwed things up (due to a bug i think, only download-mode was available afterwards), use Heimdall 1.3.1 to be safe
3. then i pushed cm 9.1 stable, cm 10.0 stable and latest gapps for 10.0 to the device
4. then i flashed cm 9.1 stable via CWM - an Error occured
5. then i selected "reboot system" in CWM (NOT "reboot recovery"!!)
6. device reboots and starts to install CM 9.1 Stable on its own
7. booted to the now "new" CWM installed by cm 9.1 zip
8. flashed cm 9.1 zip again
8. booted cm 9.1 normally, everything was working fine
9. booted into cwm
10. flashed cm 10.0 zip - an error occured
11. then i selected "reboot system" in CWM (NOT "reboot recovery"!!)
12. device reboots and starts to install CM 10.0 Stable on its own
13. booted to the now "new" CWM installed by cm 10.0 zip
14. flashed cm 10.0 zip again
15. a warning occured "incompatible filesystem, flash again to confirm"
16. flashed cm 10.0 zip again
17. booted cm 10.0 normally, everything was working fine
18. booted CWM again, flashed gapps
19. booted cm 10.0 normally, everything was working fine
I was not able to flash cm 10.0 directly after flashing codeworxs kernel with heimdall. think this is related to changed partition sizes and stuff...
device only booted to CWM again, i was not able to boot the system - bootloop. Once i tried to flash cm10, there was no success when trying to flash cm 9 after that.
i tried it 3-4 times to flash cm 10 directly with no success. i checked md5 sums of the downloaded files, but everything was fine.
the detour with cm 9.1 was the only way to get it to work.
after trying to flash cm10 directly it always screwed something and was not able to get any further.
to start again, i had to go back to stock with odin. For that i used these instructions and files. (its in german, but very well illustrated, so all of you should be able to follow the steps).
When starting from stock, you can follow the steps above and everything should be fine.
took me some hours to figure out the correct order of the steps....
this is a slightly different problem as the one in op, so i decided to provide my solution here.
the heimdall 1.3.2-bug occured with the i9000 of a friend of mine, too. only heimdall 1.3.1 did what it was supposed to.
for all people interested: i decided to flash semaphore kernel for better customization options....running pretty well
EDIT: thx to everybody in this thread posting your experiences, all together it pointed me to the solution.. THX!
Grz
Click to expand...
Click to collapse
More or less I think we both had the same problem, because I also used this link wiki.cyanogenmod.org/wiki/Samsung_Galaxy_S:_Full_Update_Guide and heimdall 1.3.2 for flashing my phone. Just it always finished successfully so I didn't realize it was the root of all problems. I used also then Odin from the youtube video that I posted in a few posts earlier, installed Android 2.3.6 and then installed ROM Manager from Google play, and used the app to flash to ClockworkMod Recovery. After that I installed directly CM10 stable with success, and without CM9 detour.

[Q] Stuck at boot screen after wiping

I installed CM 10 stable and Semaphore Kernel. Worked great. Then went to install gapps and got lots of FC's so I went on to clean cache, dalvik and to do a factory reset and suddenly I got stuck at semaphore/boot logo and couldn't go into recovery. Got the recovery fix and installed it via Odin, and it works. But, it doesn't allow me to install anything from external SD card, only internal. Of course, I don't have anything there.
What should I do? Any links for tar versions of CWM and CM 10 for i9000?
Hmmm, is it safe to assume everything will be OK if I just flash any stock firmware from sammobile?
Yup, that combined with this did the trick.

Categories

Resources