Database Develop

{PRO}[DEVELOPMENT] -FXP130- CM7.2.0 - FreeXperia Project

FreeXperia PROJECT
(Unlocked bootloader only)
We suport following accesorries
LIVEVIEW http://www.sonyericsson.com/cws/products/accessories/overview/liveviewmicrodisplay?cc=gb&lc=en#a
LIVEWATCH http://www.sonyericsson.com/cws/products/accessories/overview/smartwatch?cc=gb&lc=en
ANT+ http://www.thisisant.com/pages/technology/what-is-ant-plus
If you want to contribute to FreeXperia Project you can access it on git
https://github.com/freexperia
if you want to support our work you can donate
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=THUJZQB2U5PNC
Our team is not responsable of any damage that you or you phone will suffer by using our work

CM7 PROGRESS
FIXED
GSM - voice and data
SENSORS - from source
WIFI - from source
FM - from source (not working for now)
LIGHTS - from source
VIDEO - from source
AUDIO - from source
GPS - from source
Gralloc - from source
HOTSPOT - from source
BT - precompiled
Live View - UGLY but SMART Accesory
Live Watch - usefull, nice, smart
RECOVERY - almost ready
3D - precompiled
CAMERA - precompiled
ANT+ - precompiled and source
WORK IN PROGRESS
HDMI - work in progress (for suported devices)
FM - work in progress
BUGTRAKER
http://code.google.com/p/freexperia/

HOWTO
to flash cm7 rom you have to take 3 steps (after unpacking the 7z archive)
step 1 - copy update.zip and GAPPS ADDON to sdcard
step 2 - flash new kernel (always use the kernel provided in CM7 / it is incompatible with stock ROM)
ON PC - run fastboot flash boot boot.img (an black window will open and will stay open untill kernel is flashed)
ON PHONE - put phone in fastboot mode (power off then press lower right key and plug usb cable) and phone LED will light BLUE
step 3
- when phone is booting (FreeXperia Logo) press volume down key several times to enter recovery
- choose apply update from sdcard and select rom
- choose apply update from sdcard and select GAPPS
- wipe device
- reboot
DOWNLOAD
Look in my signature !
please don't mirror (we want to have download conunt)

Just flashed this ROM, everything looks good and working except:
- the hardware keyboard mapping is out. Alphabets are fine, it is the numbers and punctuations that is a mess. w=1 e=2 r=3 s=4 etc tried using the build-in keyboard changer but didnt help
- if I go to landscape and then back to portrait, the call, application drawer and browser shortcut which is at the bottom of the desktop will disappear. it takes a reboot to bring it back
- Tried to get the battery icon to change using UOT kitchen by uploading the apk file from the zip package but it doesn't seem to work.
so far that's it.
thanks for the effort
Ben
---------- Post added at 02:08 PM ---------- Previous post was at 02:00 PM ----------
Update on keyboard issue:
downloaded the keymap frile from freexperia issue section and replace the one in the phone.
details:
http://code.google.com/p/freexperia/issues/detail?id=5#c6
please remove the post if links are not permitted in the forum.
thanks
Ben

Update on the keyboard issue again:
Only the alphabets and numbers are okay, the punctuation marks are still our of place....
argh...

chuinkee said:
Update on the keyboard issue again:
Only the alphabets and numbers are okay, the punctuation marks are still our of place....
argh...
Click to expand...
Click to collapse
we are workingon an fix for next release

thanks for the heads up... i will make do with soft keyboard for the time being..
btw when the new release is out, do I have to wipe everything again?
Ben

Thank You freeXperia!!
This is awesome! Thanks for your hard work on the Xperia Pro
Donation coming your way from me
(edit: donation away!)
I have 2 questions:
1) does nandroid work in this recover?
2) My phone's a stock phone from Fido in Canada. I've unlocked the bootloader and rooted the phone. When I go to Settings > About Phone, my Build Number at the very bottom says "4.0.A.2.335"
How do I get SEMC 4.0.1.A.0.283?? I'd really like to use CM7!

upgrade to 4.0.2.A.0.42 released
FXP044 rom will come monday

FXP said:
upgrade to 4.0.2.A.0.42 released
FXP044 rom will come monday
Click to expand...
Click to collapse
Thanks for posting the link to 4.0.2.A.0.42. The previous rom link was missing.
Will this ROM work on my phone even though I've got an MK16a, and not an MK16i? I'm from Canada using a Fido phone, so I want to make sure my phone's Radio will work properly...this ROM is from the UK, so I'm not sure.
Just asking because on the Motorola Milestone, which I upgraded from, you had to select a different radio depending on which country you lived in.
Why do we even need to flash 4.0.2.A.0.42? Is CM7 not a complete ROM replacement? It is on the Milestone - doesn't matter what version you're coming from since CM7 replaced everything.
And FYI, the 10EUR donation was from me
Hope it goes to good use!

hy
thanks
@semc rom
we need to ensure that you have the proper baseband (radio software) this is why we request an semc rom flash 4.0.2.A.0.42 has baseband 56
@a/i
if you have an a device if better to flash proper radio from an semc a update
i will post the link for you
br
rcummings100 said:
Thanks for posting the link to 4.0.2.A.0.42. The previous rom link was missing.
Will this ROM work on my phone even though I've got an MK16a, and not an MK16i? I'm from Canada using a Fido phone, so I want to make sure my phone's Radio will work properly...this ROM is from the UK, so I'm not sure.
Just asking because on the Motorola Milestone, which I upgraded from, you had to select a different radio depending on which country you lived in.
Why do we even need to flash 4.0.2.A.0.42? Is CM7 not a complete ROM replacement? It is on the Milestone - doesn't matter what version you're coming from since CM7 replaced everything.
And FYI, the 10EUR donation was from me
Hope it goes to good use!
Click to expand...
Click to collapse

FXP said:
hy
thanks
@semc rom
we need to ensure that you have the proper baseband (radio software) this is why we request an semc rom flash 4.0.2.A.0.42 has baseband 56
@a/i
if you have an a device if better to flash proper radio from an semc a update
i will post the link for you
br
Click to expand...
Click to collapse
That would be great if you could post an SEMC update for the mk16a. One that will work in Canada
One final question: Is it possible to do a full nandroid backup prior to applying these updates, so that if I want to return to stock, I can?
I was thinking hotboot a recovery via fastboot, then take the nandroid, and then flash the SEMC update, and finally flash CM7.

The nandroid backup makes backup only of the TDs(/system,/data,etc), but it doesn't backups the kernel. As it's the same android & kernel version, it's mos probable the FXP kernel will work with the stock ROM, but I'm not sure.
Edit: I saw the Bi4ry post, and it says the stock ROM is not compatible with FreeXperia kernel.

Tried to use this instead of the official CM7 from cyanogenmod site but after boot.img it doesn't boot anymore and I can't enter CWM recovery....

FXP said:
hy
thanks
@semc rom
we need to ensure that you have the proper baseband (radio software) this is why we request an semc rom flash 4.0.2.A.0.42 has baseband 56
@a/i
if you have an a device if better to flash proper radio from an semc a update
i will post the link for you
br
Click to expand...
Click to collapse
You said you'd post the link for the SEMC 'a' update....still waiting
Any idea when that will be? Sorry for being impatient. I just miss CM7 and can't wait to get it on this phone

Not to be rude, but... When will the FXP044 will be ready? I'm waiting for it. I used a unofficial port of CM7 on my old U20a, and it was really good, so I can't wait to try something better on my MK16a.
Also, will the update to 4.0.2.A.0.42 will be necessary anyway? Which part does the ROM would depend on it?

alvaroag said:
Not to be rude, but... When will the FXP044 will be ready? I'm waiting for it. I used a unofficial port of CM7 on my old U20a, and it was really good, so I can't wait to try something better on my MK16a.
Also, will the update to 4.0.2.A.0.42 will be necessary anyway? Which part does the ROM would depend on it?
Click to expand...
Click to collapse
semc update flashes "radio" to required version so "is an must"
FXP044 will be uploaded today

Since it is already Saturday, maybe we should just hang on a little bit more for 045?

post in the wrong forum... Sorry
Sent from my LT15i using XDA App

Petter88 said:
If I have the rom up and running without radio issues even tho I flashed from the latest lt15i fw and not from the "required" lt18i Rom, is there then any reason to do the extra effort and flash the lt18i one?
Sent from my LT15i using XDA App
Click to expand...
Click to collapse
This thread is about the Xperia Pro MK16a/i. Not the lt18 or lt15. It's only here because us Pro users don't have a forum of our own yet.
Sent from my Acer Iconia A100 using XDA Premium for Android

[mint][CWM Advanced Edition] PhilZ Touch

Main thread + features + install instructions + dev support
http://forum.xda-developers.com/showthread.php?t=2201860
PhilZ Touch is a CWM Advanced Edition that adds all the features you could ever miss in CWM
It is a well proven recovery for many phones
It also adds a full touch interface a completely configurable GUI
Please give your feedback, what works, and any bug you could encounter
Read the features, and check if you are missing something
Also, do not forget to read about the powerful aroma file manager integration and double tap shortcut
Download links
Last version can be found here:
Sony Xperia T (mint)
http://goo.im/devs/philz_touch/CWM_Advanced_Edition
For stock rom:
http://forum.xda-developers.com/showthread.php?t=2657190
Click to expand...
Click to collapse
XDA:DevDB Information
[mint][CWM Advanced Edition] PhilZ Touch, a Tool/Utility for the Sony Xperia T
Contributors
Phil3759, DooMLoRD, [NUT]
Version Information
Status: Stable
Created 2014-03-29
Last Updated 2014-03-29

Phil3759 said:
Main thread + features + install instructions + dev support
http://forum.xda-developers.com/showthread.php?t=2201860
PhilZ Touch is a CWM Advanced Edition that adds all the features you could ever miss in CWM
It is a well proven recovery for many phones
It also adds a full touch interface a completely configurable GUI
Please give your feedback, what works, and any bug you could encounter
Read the features, and check if you are missing something
Also, do not forget to read about the powerful aroma file manager integration and double tap shortcut
Download links
Last version can be found here:
Click to expand...
Click to collapse
This rules that this has been ported, as I use the PhilzTouch on my Galaxy Tab2. I even donated a few $$ to him!
One question, with the shared kernel "feature" of the T, how did you avoid having it revert back to stock CWMrecovery anytime one flashes a new ROM?
Regardless, I'll try this out tonight.

Hey i always wanted this to get ported! Im using the leaked 4.3 rom and it does work but it only boots into the recovery everytime. Is this a bug or is there a way to fix this?

hhamzah49 said:
Hey i always wanted this to get ported! Im using the leaked 4.3 rom and it does work but it only boots into the recovery everytime. Is this a bug or is there a way to fix this?
Click to expand...
Click to collapse
It will be repacked into other kernels later...
Sent from my C6902 using xda app-developers app

So how do I go about installing this?
Is it as simple as boot the "T" into flashboot mode and running
fastboot -i 0xfce flash boot philz_touch_6.09.3-mint.img
But I'd rather not blow away my phone if this is wrong.

Can I use this for the xperia V, too ?

alex m. said:
Can I use this for the xperia V, too ?
Click to expand...
Click to collapse
No
Sent from my LT30p using Tapatalk

Is there a trick to using PhilzTouch on the T to avoid the shared kernel?
I installed it via "flashboot boot philz.img" and at first glance, it seems to work the same as on my Galaxy Tab 2.
But then it turns out that its not really useable.
a) I was unable to boot back into my normal ROM. Rebooting always brought it back to PhilzTouch.
b) Even if I could have found a way to boot my phone, it turns out that PhilzTouch recovery was overwritten by the stock recovery as soon as I installed a newer CM nightly which I tend to do nightly.

hi all
can i use for TX ? do i need UL or not ? thanks

How to install this recovery?
fastboot flash boot boot.img gives me each time a reboot in recovery
fastboot flash recovery boot.img gives me an error.
Anyone got this working?
Sent from my Xperia T using xda app-developers app

Thanks alot! Used it to get root on the new 4.3 update:good::good:

silasje1 said:
Thanks alot! Used it to get root on the new 4.3 update:good::good:
Click to expand...
Click to collapse
Would you please share how you did it? A how-to would be great including which ROM you came from and all the steps in clear chronological order.

zilboris said:
Would you please share how you did it? A how-to would be great including which ROM you came from and all the steps in clear chronological order.
Click to expand...
Click to collapse
You need Unlocked Boatloader at first!
1. install the 4.3 rom (any you like). Flashing the FTF with everything included
2. Flash this CWM recovery and install SU zip
3. flash FTF and exclude all except KERNEL.
Done! (limited time to write so made it short)

@Phil3759
@steveboss is reporting an extremely sensitive touch interface, is there any way you can confirm it is working out of the ordinary?

[NUT] said:
@Phil3759
@steveboss is reporting an extremely sensitive touch interface, is there any way you can confirm it is working out of the ordinary?
Click to expand...
Click to collapse
I need video of this "extremely..."

Phil3759 said:
I need video of this "extremely..."
Click to expand...
Click to collapse
Hello, I send you video tomorrow

@steveboss where's the video?
@Phil3759
I'm having trouble to get philz to recognize the internal sdcard partition (its a real partition, not part of userdata)... what ever I try, it just keeps failing...
Do you have a possibility to build philz based on the CM10.1 or the freexperia 'jellybean' repo for this device?
I'm starting to suspect the CM10.2 repo might contain some issues as it was put together with pure CM in mind, which might make it incompatible with the stock sony JB4.3 kernel...
The Xperia T made a jump from JB4.1.2 to JB4.3 in one step up, receiving it only a month or so ago, while the CM10.2 repo has been around for far longer...
The 'original' locked bootloader package has made the same jump up recently and CWM started causing problems for it's users too.

[NUT] said:
@steveboss where's the video?
Click to expand...
Click to collapse
I`am sorry, I don`t have any camera now, maybe at weekend

[NUT] said:
@steveboss where's the video?
@Phil3759
I'm having trouble to get philz to recognize the internal sdcard partition (its a real partition, not part of userdata)... what ever I try, it just keeps failing...
Do you have a possibility to build philz based on the CM10.1 or the freexperia 'jellybean' repo for this device?
I'm starting to suspect the CM10.2 repo might contain some issues as it was put together with pure CM in mind, which might make it incompatible with the stock sony JB4.3 kernel...
The Xperia T made a jump from JB4.1.2 to JB4.3 in one step up, receiving it only a month or so ago, while the CM10.2 repo has been around for far longer...
The 'original' locked bootloader package has made the same jump up recently and CWM started causing problems for it's users too.
Click to expand...
Click to collapse
Look at the fireball device repo (fstab file) to use vold with real sdcard partition
Else use compatibility recoveryonly option in fstab with real blk device path

Phil3759 said:
Look at the fireball device repo (fstab file) to use vold with real sdcard partition
Else use compatibility recoveryonly option in fstab with real blk device path
Click to expand...
Click to collapse
ooh, that could be the trick :cyclops:
Thanks for the hint :good:
I'll update you once I know if it works or not.

[ROM][CM11][ARCHIVED][21 OKT] Codename Lungo

Overview
Codename Lungo is a customized, aftermarket firmware distribution for several Android devices. Based on CyanogenMod, Codename Lungo is designed to increase battery life and size over Android-based ROMs released by vendors and carriers.
Features
Great Base
Lightweight & Fast
No Bloatware!
Longer Battery Life
Custom Launcher
Add-ons
Community Driven
And so much more...
Screenshots
Changelog
Credits and Acknowledgments
check the Codename Lungo website
Links & Other info
Kernel: Stock CyanogenMod
Documentation & F.A.Q
Add-ons
Facebook & Google+!
Codename Lungo is a Community driven ROM! So we now have a Facebook Group and a Google+ Page & Community
Here you can post mods, new ideas or just chat about the ROM!
Enjoy and JOIN! Facebook Page | Google+
Download ROM!
@ Codename Lungo Website​
XDA:DevDB Information
Codename Lungo , ROM for the HTC One (M8)
Contributors
TimV_
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Beta
Current Beta Version: CM11
Beta Release Date: 2014-10-21
Created 2014-05-12
Last Updated 2015-01-11

Glad to see more ROMs based on CM...
Waiting for the link

There appears to be no download... I select HTC One M8 and nothing happens.

Here, in the website source code is the download link: http://www.androidfilehost.com/?fid=23486020548820995

Problem with speakerphone mode using this Rom ?
I dont know if is only me or someone else has the same problem but when I use this rom and enable speakerphone I can hear the other person but apparently they cant hear me seems like the microphone isn't working or something

Setup force closed on 7-10 nightly will try 7-23 and report back...
Don't judge a book by its cover, better yet just read the back.
---------- Post added at 07:26 PM ---------- Previous post was at 07:09 PM ----------
Yep, still force closes on setup wizard when I press English on the language selection...
Don't judge a book by its cover, better yet just read the back.

Downloading 7/23 ..thank you for this!

JB_Da_Greatest said:
Setup force closed on 7-10 nightly will try 7-23 and report back...
Don't judge a book by its cover, better yet just read the back.
---------- Post added at 07:26 PM ---------- Previous post was at 07:09 PM ----------
Yep, still force closes on setup wizard when I press English on the language selection...
Don't judge a book by its cover, better yet just read the back.
Click to expand...
Click to collapse
just installed 7/22 ..it finished fine without any error.

_moelle said:
just installed 7/22 ..it finished fine without any error.
Click to expand...
Click to collapse
So you got through the setup menu with no error????

JB_Da_Greatest said:
So you got through the setup menu with no error????
Click to expand...
Click to collapse
jap, no error at all (my language is german). even after flashing and installing, everything seems to work fine. - i just test it quick n dirty, so i take the aicp-gapps for installation.

_moelle said:
just installed 7/22 ..it finished fine without any error.
Click to expand...
Click to collapse
_moelle said:
jap, no error at all (my language is german). even after flashing and installing, everything seems to work fine. - i just test it quick n dirty, so i take the aicp-gapps for installation.
Click to expand...
Click to collapse
Maybe I should try to use with those gapps...

I'm clean flashing, but it still is force closing when I select English at the setup wizard... I'm also using the PA gapps... Is their special kind of steps you use to flash????

no...im on twrp ...do wipe system, data & caches. then i install by selecting rom and gapps.
Sent from my HTC One_M8 using XDA Premium 4 mobile app

_moelle said:
no...im on twrp ...do wipe system, data & caches. then i install by selecting rom and gapps.
Sent from my HTC One_M8 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I used the 4.4.4 gapps maybe im using the wrong gapps... Maybe 4.4.2

JB_Da_Greatest said:
I used the 4.4.4 gapps maybe im using the wrong gapps... Maybe 4.4.2
Click to expand...
Click to collapse
as I said before, i was just doing a quick ´n dirty installation, just to run this rom for a short testing. so i just took the aicp gapps cause i still got them on my sd.
probably it may help you to use them: (even if these are probably not the original "lungo gapps")
http://dwnld.aicp-rom.com/?device=gapps-mini

_moelle said:
as I said before, i was just doing a quick ´n dirty installation, just to run this rom for a short testing. so i just took the aicp gapps cause i still got them on my sd.
probably it may help you to use them: (even if these are probably not the original "lungo gapps")
http://dwnld.aicp-rom.com/?device=gapps-mini
Click to expand...
Click to collapse
Thanks!!! I will try these out...
Don't judge a book by its cover, better yet just read the back.

JB_Da_Greatest said:
Thanks!!! I will try these out...
Don't judge a book by its cover, better yet just read the back.
Click to expand...
Click to collapse
if the problem still exists, just try to chose another language, probably the english strings are causing your error. - or try to redownload the whole rom once again. - sometimes errors caused of not proper downloaded packages.
if all that won´t help, i cant help you. - i´m just a flashaholic who knows some generell tricks to get most-known problems of flashing solved. - but i dont´know anything about real romdevelopment. - so u have to ask the OP I guess.

_moelle said:
if the problem still exists, just try to chose another language, probably the english strings are causing your error. - or try to redownload the whole rom once again. - sometimes errors caused of not proper downloaded packages.
if all that won´t help, i cant help you. - i´m just a flashaholic who knows some generell tricks to get most-known problems of flashing solved. - but i dont´know anything about real romdevelopment. - so u have to ask the OP I guess.
Click to expand...
Click to collapse
Thanks, I appreciate you trying to help me.
Don't judge a book by its cover, better yet just read the back.

Version bump!!!!

[ROM][Wifi][September 25]Omni 5.1.1

Summarized Standard Disclaimer: use at your own risk. I use it at mine
*Full wipe recommended if coming from another rom or Omni 5.0.2*
My personal Omni Rom 5.1 is based on omnirom with the following additions from CM11/12:
CM12 File Manager
CM11 Calculator (uglier but much more functional)
Bash shell
Nano text editor
CM12 discontinued Koush derived superuser
CM11 Forward ported custom host name
CM12 volume long press music track control
CM12 ad hoc wifi detection
CM12 camera power button shutter control
CM12 openssh command line utilities
CM12 custom quick settings
CM12 trebuchet launcher
The list of personal touches isn't very long right now but they include
Battery icon changes color based on percent: 0-15 red, 16-50 yellow, 51-100 green
Jelly bean style toasts
Android 4.x nav bar icons
Disabled SELinux at the kernel
Up to 1.6GHz CPU OC
Automatic 400MHz GPU OC
Not Working/Quirky
Bluetooth audio?? (can't test myself)
Stock camera randomly freezes. Just open it again
AOSP keyboard swipe doesn't work: google's fault.
Can't hear phone calls.
Flashing SuperSU might cause issues since the su daemon is started by the ram disk script since boot scripts apparently don't work.
Plugging in a charger when turned off causes the tablet to get stuck at animation loading
Everything else not listed as a quirk probably works.
*First Time or Coming from Omni 5.0.2*
-Read second post FAQ and other important information
-Make titanium backup (highly recommended)
-Flash TWRP 2.8.1.0
-Reboot into new recovery
-Make recovery backup (meh, I don't usually do it but you have been warned)
-Full wipe
-Format system
-Install rom
-install gapps (you can use another one if you want. I always provide the most minimum gapps)
-reboot
-install adblocker
*Subsequent flashes*
-Install ROM
-Install gapps
-Reboot into rom
-Reapply any adblocking hosts file.
Downloads
Gapps Android File Host (same one as omni 5.0)
TWRP Android File Host
Wifi ROM Android FIle Host
3G ROM Android FIle Host
Credits:
-decatf: your patches were vital to the rom
-drewwalton19216801: used your gapps for the minimal gapps package
-kasper_h: I learned a lot from doing kitkat with you last year
-pershoot: original device/vendor base
-omni team: providing rom
-cyanogenmod team: rom extras
Sources https://github.com/AAccount?tab=repositories
Screenshots to follow later
XDA:DevDB Information
[ROM][Wifi+3G][March 22]Omni 5.1, ROM for the Samsung Galaxy Tab 10.1
Contributors
AAccount
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.1.x
Based On: Omni, Cyanogenmod
Version Information
Status: Stable
Created 2015-03-22
Last Updated 2015-03-22

Reserved

Reserved #2

No more p4tmo?

Sweet!
Just one thing... am I blind or you just forgot the download link for the ROM?

They're under the Downloads section.

this ROM seems nice and fast! Breathes new life to the grab. Can anybody point me to a different gapps pack? (Not so slim) I have tried out downloading several but was not able to flash any of the the .zips in twrp.

rtiangha said:
No more p4tmo?
Click to expand...
Click to collapse
I'm waiting to hear back on if the 3G works. If it does then I'll to TMobile.
----------------------------------Added-----------------------------------------------
New weekly is up.

Very fast, much faster than 4.4.4, but 3g and keyboard not working...

VyKril said:
Very fast, much faster than 4.4.4, but 3g and keyboard not working...
Click to expand...
Click to collapse
Keyboard is easily fixable by just flipping some switches in the settings.

Major problems
Hi!
I'm new with flashing Samsung devices but i have flashed other and i thought this can not be so hard..
But now i need your help!
I wipe the whole thing nothing left, i can get in to recovery and i can load zip-files to the tab, but it says i have a P4wifi and I don't. What have I done wrong and is there anything I can do to fix this and flash Omni 5.1 for 3G tab?
I downloaded the omni-5.1-20150330-p4-HOMEMADE so I must have done something before this, maybe when i rooted the tab?
If u don't understand my english writing feel free to ask so maybe I can explain myself.

[evol] said:
Hi!
I'm new with flashing Samsung devices but i have flashed other and i thought this can not be so hard..
But now i need your help!
I wipe the whole thing nothing left, i can get in to recovery and i can load zip-files to the tab, but it says i have a P4wifi and I don't. What have I done wrong and is there anything I can do to fix this and flash Omni 5.1 for 3G tab?
I downloaded the omni-5.1-20150330-p4-HOMEMADE so I must have done something before this, maybe when i rooted the tab?
If u don't understand my english writing feel free to ask so maybe I can explain myself.
Click to expand...
Click to collapse
Perhaps you flashed the wrong recovery? Try flashing the correct one and see what happens.
Sent from my p4wifi using XDA Free mobile app

Olivier V said:
Perhaps you flashed the wrong recovery? Try flashing the correct one and see what happens.
Sent from my p4wifi using XDA Free mobile app
Click to expand...
Click to collapse
Found a old recovery file from 2012, flashed that with Odin, manage to install the rom, but not the gapps.
"Android is processing" so something is happening. I will just wait and see.
Maybe I did?
There are so many files circulation out there so I´m getting confused.
Maybe you can point me in the right direction?
I downloaded the wifi rom, but no luck with that.

[evol] said:
Maybe I did?
There are so many files circulation out there so I´m getting confused.
Maybe you can point me in the right direction?
I downloaded the wifi rom, but no luck with that.
Click to expand...
Click to collapse
First of all you need the 3G rom not the WiFi rom.
Download the recovery for your 3G tab from this post, flash it and see what happens.
http://forum.xda-developers.com/sho...ROM][Unofficial][AOSP] Android 5.1.0 Lollipop
Sent from my p4wifi using XDA Free mobile app

Olivier V said:
First of all you need the 3G rom not the WiFi rom.
Download the recovery for your 3G tab from this post, flash it and see what happens.
http://forum.xda-developers.com/sho...ROM][Unofficial][AOSP] Android 5.1.0 Lollipop
Sent from my p4wifi using XDA Free mobile app
Click to expand...
Click to collapse
Hi thanks for your help!
I did an edit in my earlier post, and now i manage to install the 3G rom.
So I got my Tab up and running.
But I appreciate your help very much because I got two tabs, i bought them yesterday for 500SEK (57 US$) from a friend at work.
And now I don't want to make the same mistake again.

[evol] said:
Hi thanks for your help!
I did an edit in my earlier post, and now i manage to install the 3G rom.
So I got my Tab up and running.
But I appreciate your help very much because I got two tabs, i bought them yesterday for 500SEK (57 US$) from a friend at work.
And now I don't want to make the same mistake again.
Click to expand...
Click to collapse
I'm glad it all worked out for you
Sent from my Z1 Compact

Awesome
Initial response is great. Checking into things. GReat job on what appears to be a solid rom.

Cant use 3g
Any ideas? ?

My 3G not working
Any solution?
Thanks

sidle said:
Keyboard is easily fixable by just flipping some switches in the settings.
Click to expand...
Click to collapse
Looks nice, still need to look into it.
Can't find what to change in the configuration to make the keyboard appears.
Can you guide me?

Unofficial CM 12 for Xperia E1 *working Progress

Hey this thread is for making an cm12 rom for xperia E1 And E1 Dual!
UPDATE:I CANNOT MANAGE TO GET THE BOOTLOOP ISSUE FIXED
LIKE OTHER DEVS SAID NO AOSP SUPPORT
Android 5 lolipop features
Less Ram Usage
Version with stock Xperia Apps from Xperia Z3
More Usages...
3g+!!
Adreno 302 Tweaks.......
Qualcomm MSM8210 Snapdragon 200 Tweaks.........
Not working:
GPS, Bluetooth, WiFi(Solved), Sound, Camera, Dial menu, Auto rotate, Lockscreen, Leds
Bravia Engine System Tweaks.....
Stuff E1 users need:
rooted hot-bootable kernel
working TA-partn backup so users can unlock bootloaders late in the game
once you unlocked: it is no going back! (no relock method proven yet!)
to flash in flash-mode (rather than fast boot mode) u need to unlock the bl
The Rom IS UPLOADED!
Installation Guide:
FIRST:
You need an unlocked bootloader, root, custom recovery already installed and PLEASE make a full backup using the recovery.
SECOND
0 - Download it and move it to SD CARD
1 - Go to TWRP(Custom Recovery)
2 - "Wipe and Format Options"
3 - "Clean to Install a New ROM"
4 - Install ZIP
5 - Chose zip from /storage/sdcard...
6 - Then chose "cm-12XPERIAE1.zip" and wait the installation, after installed reboot your device.
7 - DONE
*Remember that there are a lot of things don't working, so this is an alpha version. I hope on the future we will be able to get a stable rom.
Download: XDA:DevDB Information[/SIZE][/U][/B]
[E1][ROM]CM12 For XPERIA E1, ROM for the Sony Xperia E1
Contributors
[URL="http://forum.xda-developers.com/member.php?u=5885651"]Siokrismarios
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: XPeria E1
Based On: CYANOGEN MOD 12
Version Information
Status: Alpha
Current Stable Version: NO
Stable Release Date: 2015-08-12
Current Beta Version: 1.2.1
Beta Release Date: 2015-08-20
Created 2015-08-08
Last Updated 2015-12-17

Woah. How did you get it to work with KK kernel? I'm curious
(I'm ready for testing btw.)

Kizoky said:
Woah. How did you get it to work with KK kernel? I'm curious
(I'm ready for testing btw.)
Click to expand...
Click to collapse
happy to hear that unfortuntly i have some problems with mediafire

Siokrismarios said:
happy to hear that unfortuntly i ahve some problems with mediafire
Click to expand...
Click to collapse
Upload it to here then: https://mega.co.nz/
Also, If you need E1's Vendor it is here: https://github.com/CyanogenMod-E1/android_vendor_sony_e1/tree/cm-12.1/proprietary

Kizoky said:
Upload it to here then: https://mega.co.nz/
Also, If you need E1's Vendor it is here: https://github.com/CyanogenMod-E1/android_vendor_sony_e1/tree/cm-12.1/proprietary
Click to expand...
Click to collapse
Thank you!!!

WTF? It does not even boot up
Stuck at CM logo
Don't use Vendor files I mentioned here, it does not work

Does not work...?
Flashed it, everything seems to go nicely, then it does not boot. It's stuck on the boot animation. Did you even check before uploading it? Did it work for you?

xezrunner said:
Flashed it, everything seems to go nicely, then it does not boot. It's stuck on the boot animation. Did you even check before uploading it? Did it work for you?
Click to expand...
Click to collapse
Yeah it succsesfull booted in my xperiae1 please pm me with screenhots to short that out!

Siokrismarios said:
Yeah it succsesfull booted in my xperiae1 please pm me with screenhots to short that out!
Click to expand...
Click to collapse
Not sure If I did something wrong
I wiped my system, cache, dalvik, almost everything, and then flashed the ROM; and then I restarted my phone
Shortly after the Sony logo the CM logo showed up, but it is stuck and sometimes it is laggy
kmsg: postoffice_sendPackage, postoffice service hasn't ready re-sent at 5 secs later
This message is spammed

Kizoky said:
Not sure If I did something wrong
I wiped my system, cache, dalvik, almost everything, and then flashed the ROM; and then I restarted my phone
Shortly after the Sony logo the CM logo showed up, but it is stuck and sometimes it is laggy
kmsg: postoffice_sendPackage, postoffice service hasn't ready re-sent at 5 secs later
This message is spammed
Click to expand...
Click to collapse
Pm me

Any progress so far?

Kizoky said:
Any progress so far?
Click to expand...
Click to collapse
unfortunately no my head is stucked up!
Στάλθηκε από το D2005 μου χρησιμοποιώντας Tapatalk

Need my help?
I have this phone back from January.. actually purchased it for my mom!
But this is overloaded most of the times and now I have the device for myself!
Pm me if You need some sort of support!

kaustubh.rockstar said:
Need my help?
I have this phone back from January.. actually purchased it for my mom!
But this is overloaded most of the times and now I have the device for myself!
Pm me if You need some sort of support!
Click to expand...
Click to collapse
We all need your help my friend, Xperia e1 users have been waiting for a miracle in order to have at least a custom rom. What we really need is a super hero

Darkar18 said:
We all need your help my friend, Xperia e1 users have been waiting for a miracle in order to have at least a custom rom. What we really need is a super hero
Click to expand...
Click to collapse
A miracle that is not likely to happen

Is it based on ramdisk-hijack method?
SP users were starting like here- nothing was working...
Try to make CM 10.2 or 11, it's easier!
Helping Tutorial:http://forum.xda-developers.com/showthread.php?p=50396702#post50396702

MixoMaxoViper said:
Is it based on ramdisk-hijack method?
SP users were starting like here- nothing was working...
Try to make CM 10.2 or 11, it's easier!
Helping Tutorial:http://forum.xda-developers.com/showthread.php?p=50396702#post50396702
Click to expand...
Click to collapse
We can boot into CM11 without any problems
the Issue here is the non-working drivers (Sony OEM drivers from Stock ROM does not work)

Maybe there is a phone with same specs?
Look at Motorola Moto E(1st Gen.), same processor, and pure KitKat.

MixoMaxoViper said:
Maybe there is a phone with same specs?
Look at Motorola Moto E(1st Gen.), same processor, and pure KitKat.
Click to expand...
Click to collapse
Only graphics drivers working, Sound barely, Wi-Fi, Bluetooth, GPS is not working (the way E1 is works differently, or It has a GPS chipset that are not the same as in Motorola)

Ok, but how can I check the WIFI and Bluetooth driver/chip in phone?
And Is it possible to make it for LB later?