Related
Hi,
I want to update/upgrade my galaxy mini GT - s5570 to gingerbread.
Its currently running 2.2.1.
Baseband version
s5570jxka2
KERNEL VERSION
2.6.32.9-PERF [email protected]#1
bUILD NUMBER
FROYO.JPKA3
I dont know if i have to root my device to update. I just want to upgrade to gingerbread. Any help on how to upgrade!
Install odin v4.32
Install the kies software for drivers
Download the latest firmware for ur region from www.samfirmware.com
extract the md5.tar from the above downloaded zip file
Download tass.ops
Open odin software and click on "one package"
Then click on OPS button and load tass.ops
Then similarly load md5.tar file
Switch of ur phone
By pressin this combo "volume down + menu + power" buttons, all at SAME TIME, go into download mode
If u were successfull in goin into download mode, a yellow triangle with android appears
Then connect ur usb cable to pc
If ur usb cable and usb are workin properly, odin will detect it and yellow box appears in COM1 port
Then start the flashin
Don't remove the usb cable untill the above yellow becomes blue or odin says pass.
Then remove ur usb.
That's it !!!
U have upgraded successfully
For more references go to. www.yagyagaire.blogspot.com
There u will also know abt how to root, install recovery, and installing custom roms.
Good luck
Press thanx if this was helpfull
I need your help.
When i start my phone i get force close errors.
I used odin 4.38
I did as you said and i used this rom S5570XWKS7_S5570OXXKS2_S5570XWKS2_HOME.tar
In recovery mode i get this screen only
RAMDUMP MODE(ARM9MODE)
i cant do anything.
Did u verify that u used odin for mini and firmware specific for mini ?
yes i did
http://yagyagaire.blogspot.in/2011/08/upgrade-samsung-galaxy-popmini-gts5570.html?m=0
Here follow this picture tutorial correctly..
Are you sure that you where using the right files? Your phone cant boot wrong files.
Sent from my GT-S5570 using XDA
Okay i als flashed my phone to 2.3.4, and i still got the files on my pc. I can put them in a zip file and post a stap by stap toturial for you. Just how i did.
Do you want that?
Sent from my GT-S5570 using XDA
domini99 said:
Okay i als flashed my phone to 2.3.4, and i still got the files on my pc. I can put them in a zip file and post a stap by stap toturial for you. Just how i did.
Do you want that?
Sent from my GT-S5570 using XDA
Click to expand...
Click to collapse
Sure. It would be great help.
Above tut by me was easy isn't it. ? U dint understand ?
1813 archron
Xenon X said:
[
Here follow this picture tutorial correctly..
Click to expand...
Click to collapse
Both links for firmware mentioned on the page you referred have been removed. now what do i do?
I downloaded this (S5570DDKQ7_S5570ODDKQ6_INU) from samfirmware
but now when i after pressing start this happens
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> --- cannot open the usb serial port. code: 5
Did u install kies latest software ?
Did u successfully go into download mode?
When usb is connected, does com ports glow to yellow?
Did u verify that the ddkq7 file is not broken? U can verify by the openin it. If u get an error from winzip, u gotta download again...
Anwer these questions..
mogavina said:
Hi,
I want to update/upgrade my galaxy mini GT - s5570 to gingerbread.
Any help on how to upgrade!
Click to expand...
Click to collapse
Read this thread and follow my posts vv
http://forum.xda-developers.com/showthread.php?t=1689055
Best Regards
Sorry i posted this toturial so late, but i had a dansing show, it was a succes
Okay, here is the toturial:
first download the files down here, only use what i gave you.
--WARNING-- Your phone must be charged to 90% or more, to prevent flash failure.
okay, put your phone in download mode. (power button, home button, and volume down button at same time) connect it to usb, and start odin.
Select ops file,
than select the boot file, named: APBOOT_S5570XXKPI_CL260130_REV02_user_low_true.tar.md5
Select Phone file: MODEM_S5570XXKPI_CL260130_REV02.tar.md5
The PDA file: CODE_S5570XXKPI_CL260130_REV02_user_low_true.tar.md5
and as last the CSC file: CSC_S5570SERKPI_CL260130_REV02_user_low_true.tar.md5
--MAKE SURE THIS IS RIGHT, AND ELSE YOUR PHONE CAN BE FATAL BRICKED!!!--
okay, all good?
right. click start.
wait till your phone reboots,
THEN, remove your usb cable.
and then the last part: Have fun!
----------------------------------------------------------------------------------------------------------------------------------------------------------
Files to download
http://www.mediafire.com/?zx83r9p30zqxd6r
Use a powerfull unzipper like 7-zip or winrar, windows explorer will take ages.
Ur rom still stock right then why not use Kies
did you tried my toturial?
mogavina said:
I need your help.
When i start my phone i get force close errors.
I used odin 4.38
I did as you said and i used this rom S5570XWKS7_S5570OXXKS2_S5570XWKS2_HOME.tar
In recovery mode i get this screen only
RAMDUMP MODE(ARM9MODE)
i cant do anything.
Click to expand...
Click to collapse
Recovery can be entered by holding
Home + power at same time
Sent from my GT-S5570 using xda premium
Hey how your going around there? Is the problem fixed?
Send from my sending thing..
Hey dude are your problem has been solved?
Sent from my GT-S5570 using xda premium
Helloooooooooooooo???!!!!!!
Is there somebody? *nock nock nock*
I think this treath should be closed. There is noany move at all, he isnt telling us if his problem is solved or not, so we cant help him.
Sent from my sending thing...
A friend of mine got a Samsung Galaxy S Plus and wanted to update its software via Kies.
He told me that the update just stopped at around 3% and it got frozen there for one hour. He then told me that he unplugged the phone and it wouldn't start (obviously). I tried to help him. I entered in his PC using Team Viewer and the first thing I wanted to do was to flash a stock firmware. He also told me he couldn't get in recovery mode. Only download and ramdump modes. I downloaded ODIN (used 3.04 and 1.82), the latest firmwares from the Samsung site and started the proccess (I explained him how to put the phone into download and when to connect it). We did that and started to flash the FW. It would check the MD5 and after that it's saying "Setup connection..." and stays there for 15 mins. After checking some threads i told him to get the SIM and the memory card out of the phone, to switch the USB port, to reinstall the drivers, even to get out the battery. Nothing worked.
After this I tried another method using Odin Multi Downloader. I followed the tutorial in this thread: http://forum.xda-developers.com/showthread.php?t=1648163 and it didn't work. It also got stuck at "Setup connection...". Here's the log if it helps.
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
Anything that could help ? Thank you really much, guys !
Crys7y said:
Anything that could help ? Thank you really much, guys !
Click to expand...
Click to collapse
you can retry KIES like this http://forum.xda-developers.com/showthread.php?t=1801138
or use AiresVE.ops , MultiLoader Odin v.4.43 and an official ROM try download from another source, as one person I I tried to help , finally found, that the AriesVE.ops was corrupted and that made it impossible to flash http://forum.xda-developers.com/showpost.php?p=28794698&postcount=8
Apparently, your phone does not have a workable rom on it so you need to search for the correct firmware for your unit before you try again
the procedure should be
First remove battery and reinsert
1) "Select OPS" AriesVE.ops
2) Unzip/unrar the ROM you are flashing.
If it's a single .tar.md5 file, check the option "One Package" in Odin and then load the .tar.md5 file using the One Package button at the very bottom. Odin will load it and check the MD5 checksum. and should be over in ten minutes
If your ROM consists of several .smd files,
Select Boot_loader.tar under BOOT
Select Modem under PHONE
Select PDA under PDA
Select CSC under CSC .
Press Start, Flashing should take about 10 minutes
If it fails, than try again with protect ops unchecked
Thank you very much ! I did not think about Kies Recovery but I will try it. I will update my post in several hours.
PS: I'm sorry I didn't do a better search on the forum.
Crys7y said:
Thank you very much ! I did not think about Kies Recovery but I will try it. I will update my post in several hours.
PS: I'm sorry I didn't do a better search on the forum.
Click to expand...
Click to collapse
I tried to use Kies to repair the firmware but it didn't seem to work, and most importantly, I couldnt go into Recovery mode (the built-in recovery) as the program said. However I could remain into emergency mode or download mode (neither worked). It uploaded one bar to 100% then it would come to this: (see attach) . And it stood there a solid hour. Then he said that he will send it to Samsung for warranty, even if I wanted to play with it a bit more (trying custom roms). I'm so sorry this problem will remain unsolved.
Thank you very much for your help !
I had rooted my phone long back with ZergRush root. It had worked but I did not really install a recovery partition at the time. I was trying to upgrade my firmware to ICS today so I tried to boot into recovery thinking that I could not have rooted earlier without CWM. However I could not boot into recovery using either i)volume up button ii) volume up with home button iii)volume down with home. So I set out to install clockwork mod recovery. And here is where I got totally off track. I tried using odin to install cwm and had connected my phone to the laptop. However ODIN returned a fail several times after trying to install the cwm. So I wanted to restart my phone to try some other process. It is now saying "firmware upgrade fail! try using recovery mode" but I do not have a recovery mode!. In short, I seem to have bricked my phone. What do I do now?
Any help is greatly appreciated! This is the only phone that I have right now.
vvvccc said:
I had rooted my phone long back with ZergRush root. It had worked but I did not really install a recovery partition at the time. I was trying to upgrade my firmware to ICS today so I tried to boot into recovery thinking that I could not have rooted earlier without CWM. However I could not boot into recovery using either i)volume up button ii) volume up with home button iii)volume down with home. So I set out to install clockwork mod recovery. And here is where I got totally off track. I tried using odin to install cwm and had connected my phone to the laptop. However ODIN returned a fail several times after trying to install the cwm. So I wanted to restart my phone to try some other process. It is now saying "firmware upgrade fail! try using recovery mode" but I do not have a recovery mode!. In short, I seem to have bricked my phone. What do I do now?
Any help is greatly appreciated! This is the only phone that I have right now.
Click to expand...
Click to collapse
Use Odin to flash the stock image. Google xda wiki exhibit, and read carefully. Odin is more dangerous than recovery, i don't know how you flashed recovery in Odin, in the first place. I thing it has to be a tar.gz file. But just read and you will be fine
Sent from my Nexus 7 using xda app-developers app
vvvccc said:
I had rooted my phone long back with ZergRush root. It had worked but I did not really install a recovery partition at the time. I was trying to upgrade my firmware to ICS today so I tried to boot into recovery thinking that I could not have rooted earlier without CWM. However I could not boot into recovery using either i)volume up button ii) volume up with home button iii)volume down with home. So I set out to install clockwork mod recovery. And here is where I got totally off track. I tried using odin to install cwm and had connected my phone to the laptop. However ODIN returned a fail several times after trying to install the cwm. So I wanted to restart my phone to try some other process. It is now saying "firmware upgrade fail! try using recovery mode" but I do not have a recovery mode!. In short, I seem to have bricked my phone. What do I do now?
Any help is greatly appreciated! This is the only phone that I have right now.
Click to expand...
Click to collapse
If you can boot into download mode you should be okay. Try volume down and the power button.
theAPANT said:
Use Odin to flash the stock image. Google xda wiki exhibit, and read carefully. Odin is more dangerous than recovery, i don't know how you flashed recovery in Odin, in the first place. I thing it has to be a tar.gz file. But just read and you will be fine
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the reply. I will try this and update this thread. I used the .tar file for CWM from one of the forums.
meekrawb said:
If you can boot into download mode you should be okay. Try volume down and the power button.
Click to expand...
Click to collapse
I am not able to boot into the download mode. As soon as I switch the phone on, the only screen which comes up is "firmware upgrade fail! Try using recovery mode"
Also, I was trying to use the wiki, but the files for the drivers are missing in the wiki. The dropbox link does not have anything in it.
vvvccc said:
I am not able to boot into the download mode. As soon as I switch the phone on, the only screen which comes up is "firmware upgrade fail! Try using recovery mode"
Also, I was trying to use the wiki, but the files for the drivers are missing in the wiki. The dropbox link does not have anything in it.
Click to expand...
Click to collapse
Another thing was that initially when I was trying to enter the recovery mode, I used the second method used in one of the threads because this one would not work. I pulled the battery, connected the USB and then put in the battery again. Volume down+power was not working for me even then! But now that only gives me the firmware upgrade fail message.
Have I totally bricked it this time?
vvvccc said:
Another thing was that initially when I was trying to enter the recovery mode, I used the second method used in one of the threads because this one would not work. I pulled the battery, connected the USB and then put in the battery again. Volume down+power was not working for me even then! But now that only gives me the firmware upgrade fail message.
Have I totally bricked it this time?
Click to expand...
Click to collapse
here is a link to the drivers:
<deleted>
Even though this is for a different phone maybe you can try stuff from this post:
http://forum.xda-developers.com/showthread.php?t=2088450
Good luck!
Edit: Download Kies from http://www.samsung.com/us/kies/
vvvccc said:
Another thing was that initially when I was trying to enter the recovery mode, I used the second method used in one of the threads because this one would not work. I pulled the battery, connected the USB and then put in the battery again. Volume down+power was not working for me even then! But now that only gives me the firmware upgrade fail message.
Have I totally bricked it this time?
Click to expand...
Click to collapse
I doubt it its pretty hard to get a hard brick. You can always buy a download mode jig. I personally have one. Is it that you cant get into download is that the problem?
Also try to take out the battery, hold volume down and power and then insert the battery, that might work. Don't connect USB.
Sent from my Nexus 7 using xda app-developers app
theAPANT said:
I doubt it its pretty hard to get a hard brick. You can always buy a download mode jig. I personally have one. Is it that you cant get into download is that the problem?
Also try to take out the battery, hold volume down and power and then insert the battery, that might work. Don't connect USB.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
That is one of the problems. I can not get it to start at all.
One more thing, the stock image file on the wiki thread is corrupt. The file archive is damaged, does anyone have the stock image for exhibit with them ? Thanks!
Oh! My bad, it had not downloaded properly first time!
vvvccc said:
That is one of the problems. I can not get it to start at all.
One more thing, the stock image file on the wiki thread is corrupt. The file archive is damaged, does anyone have the stock image for exhibit with them ? Thanks!
Oh! My bad, it had not downloaded properly first time!
Click to expand...
Click to collapse
If the phone does not turn on at all then you may have a problem. Hopefully this is not the case. If anything pops up on the phone, than its fixable with a computer.
Sent from my Nexus 7 using xda app-developers app
theAPANT said:
If the phone does not turn on at all then you may have a problem. Hopefully this is not the case. If anything pops up on the phone, than its fixable with a computer.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
The phone does turn on but I do not get the download screen. Is that fixable without the dongle? I think that is what is causing me some trouble to flash back. ODIN is detecting the phone but is not able to change it.
Oh and I just realized that I am getting the phone ! Pc screen, which is apparently one which should be equal to the download screen.
*crossed fingers*
vvvccc said:
The phone does turn on but I do not get the download screen. Is that fixable without the dongle? I think that is what is causing me some trouble to flash back. ODIN is detecting the phone but is not able to change it.
Click to expand...
Click to collapse
Try using Odin a bunch of times in a row. If it doesn't work try it again on a different USB port.
vvvccc said:
The phone does turn on but I do not get the download screen. Is that fixable without the dongle? I think that is what is causing me some trouble to flash back. ODIN is detecting the phone but is not able to change it.
Click to expand...
Click to collapse
OK that is a good sign and means you probably have the right drivers set up. If none of those methods can get you to download have worked you may need a jig. If you are good at soldering you can make one with a 301k resistor conecting the 4 and 5 pin. But that's pretty hard to get right. Im guessing that my idea of inserting the battery, didn't work
Edit: Odin cant do anything because it isn't in download mode, to answer the second part of the question.
Sent from my Nexus 7 using xda app-developers app
My phone:
phone--/!\--pc
This is the screen I am getting on the phone. but there is an additional message at the bottom which says firmware upgrade fail! try using recovery mode
ODIN:
Also, right now I can see the phone as an ODIN com port, but for the past twenty minutes it has not been able to set up connection. It is stuck on this message
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
vvvccc said:
My phone:
phone--/!\--pc
This is the screen I am getting on the phone. but there is an additional message at the bottom which says firmware upgrade fail! try using recovery mode
ODIN:
Also, right now I can see the phone as an ODIN com port, but for the past twenty minutes it has not been able to set up connection. It is stuck on this message
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
Click to expand...
Click to collapse
OK yea this is no real problem, i fixed a Samsung captivate just like this. The phone must be in download mode. That is the only way it will work. I used a jig but maybe a key combination will work. The detected: 1 means it finds something plugged in but Odin cant "talk" to it because once again not in download. Just repeatedly try to get into download mode, you should get to a screen that says volume up to continue, volume down to cancel. The difference with a jig is it bypasses this screen and goes straight to download mode. Also maybe try to get to recovery, check out the wiki
Sent from my Nexus 7 using xda app-developers app
vvvccc said:
My phone:
ODIN:
Also, right now I can see the phone as an ODIN com port, but for the past twenty minutes it has not been able to set up connection. It is stuck on this message
<1> setup connection...
Click to expand...
Click to collapse
Past Forty minutes now!!
theAPANT said:
OK yea this is no real problem,
Click to expand...
Click to collapse
This is like music to my ears..I was afraid I had bricked it forever, or at least for a week or so. Thank you!
theAPANT said:
Also maybe try to get to recovery, check out the wiki
Click to expand...
Click to collapse
I did install CWM recovery on my external card right before bricking it, but how do I get it to change to the internal memory now?
I find it weird that ppl do volume+powe button only to get to odin mode/dl mode. We do need to press the home hutton too right?
Sent from my GT-I9300 using xda app-developers app
hypermagz said:
I find it weird that ppl do volume+powe button only to get to odin mode/dl mode. We do need to press the home hutton too right?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Well I did try a bunch of combinations to get into the dl mode. None of them worked. Including the one mentioned earlier in this thread and the one you are saying. Do you know of any other way?
The phone must be in download mode. That is the only way it will work. I used a jig but maybe a key combination will work. The detected: 1 means it finds something plugged in but Odin cant "talk" to it because once again not in download. Just repeatedly try to get into download mode, you should get to a screen that says volume up to continue, volume down to cancel.
Click to expand...
Click to collapse
Past Forty minutes now!!
Click to expand...
Click to collapse
Should I just disconnect ODIN or will that damage my phone because it has not completed whatever it is doing yet? I have nt yet gotten a success or failure notification as of now.
You can flash every gadget that you have but still be a noob at this.
I have problem 2 days ago that i have installed some patch from the XDA forum Named stats bar like S4
and then my phone now dot open loading and keep loading on the CM Logo and do nothing more i tried to re-Flash the ROM but it didn't work
Every time my Odin keep crashing and i don't have Memory Card
so what can i do i searched so many for solutions but no thing works so do you know any way to this? i have no other phones :/
thanks in Advance
Haitham:crying:
.NetDeveloper said:
I have problem 2 days ago that i have installed some patch from the XDA forum Named stats bar like S4
and then my phone now dot open loading and keep loading on the CM Logo and do nothing more i tried to re-Flash the ROM but it didn't work
Every time my Odin keep crashing and i don't have Memory Card
so what can i do i searched so many for solutions but no thing works so do you know any way to this? i have no other phones :/
thanks in Advance
Haitham:crying:
Click to expand...
Click to collapse
Don't worry.. I think you are in a boot loop (It happens usually around here . I am using i9001. So i cannot tell you the exact solution of i9000 (A specific search would help). Anyways, the common solution is to flash a fresh rom via recovery. If it not helps then try to flash a stock rom via odin. Odin related problems have been discussed many times. just look for it. Above all don't lose hope and be patient..:good:
what fone please i9000? /1/3/m or anycall?
n odin crashing in stage what? pit mapping? installing param.lfs?
n try formatting system by mounting system first, n find other custom ROM to flash via cwm.
u can mount internal sd by mounting sdcard or sdext first n choose mount usb storage in cwm
n if u still can boot to download mode, find some latest samsung usb driver n install, n if odin doesnt recognize ur fone, use other usb port
but still, please give more option on ur fone version, build number if any n etc that necessary as i cant juz give any guide if ur using other than i9000
Sent from my GT-I9000 using xda premium
Boot into recovery and wipe cache, dalvck cache, system, and factory reset, do not wipe internal memory, and reflash ROM and gapps, that is what works for me
Sent from my Galaxy Nexus using XDA Premium HD app
OK here
compacity said:
what fone please i9000? /1/3/m or anycall?
n odin crashing in stage what? pit mapping? installing param.lfs?
n try formatting system by mounting system first, n find other custom ROM to flash via cwm.
u can mount internal sd by mounting sdcard or sdext first n choose mount usb storage in cwm
n if u still can boot to download mode, find some latest samsung usb driver n install, n if odin doesnt recognize ur fone, use other usb port
but still, please give more option on ur fone version, build number if any n etc that necessary as i cant juz give any guide if ur using other than i9000
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
GT-I9001 this my fone
FCC ID: A3LGTI9001
and now i cant open the Recovery mode it shows me this pic like the phone connected ti computer and there is Error
But download mode i can go to it and Odin See my Phone normally but it stop in Setup connection Step and do no thing
and sometimes when i try to put the CWM tar.md5 it do it normally using one Package option it pass good till it shows Pass in blue and rebooting but it stop again on the CM Logo and dont open in recovery mode and one Package option not accept ZIP files it stop on setup Connection step or Crash if start the connection
Sadly
skruid said:
Boot into recovery and wipe cache, dalvck cache, system, and factory reset, do not wipe internal memory, and reflash ROM and gapps, that is what works for me
Sent from my Galaxy Nexus using XDA Premium HD app
Click to expand...
Click to collapse
sadly this doesn't open with me i think the recovery mode it not exist now
.NetDeveloper said:
GT-I9001 this my fone
FCC ID: A3LGTI9001
and now i cant open the Recovery mode it shows me this pic like the phone connected ti computer and there is Error
But download mode i can go to it and Odin See my Phone normally but it stop in Setup connection Step and do no thing
and sometimes when i try to put the CWM tar.md5 it do it normally using one Package option it pass good till it shows Pass in blue and rebooting but it stop again on the CM Logo and dont open in recovery mode and one Package option not accept ZIP files it stop on setup Connection step or Crash if start the connection
Click to expand...
Click to collapse
I guess you bricked your device. See this http://forum.xda-developers.com/wiki/Samsung_Galaxy_S/GT-I9001 a method is briefed there 'Un-brick the device'. Go through that
After that access the recovery(method to do so also explained in there). And then flash a new custom rom properly.
i did this
jabrif said:
I guess you bricked your device. See this http://forum.xda-developers.com/wiki/Samsung_Galaxy_S/GT-I9001 a method is briefed there 'Un-brick the device'. Go through that
After that access the recovery(method to do so also explained in there). And then flash a new custom rom properly.
Click to expand...
Click to collapse
i did this all before and it just connect and in the square on top Says firstly Recovery then Reset then my phone restarting
and show me this MSG in log
Code:
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> recovery.img download..
<1> 1/1 Finished.
<1> reset pda..
<0> Started Timer
<1> Close serial port and wait until rebooting.
and then on my phone i just see the logo again and the counter keep count down on oden till the End like 5 min then tell me Pass in blue color but the phone still on the logo screen and did nothing
.NetDeveloper said:
i did this all before and it just connect and in the square on top Says firstly Recovery then Reset then my phone restarting
and show me this MSG in log
Code:
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> recovery.img download..
<1> 1/1 Finished.
<1> reset pda..
<0> Started Timer
<1> Close serial port and wait until rebooting.
and then on my phone i just see the logo again and the counter keep count down on oden till the End like 5 min then tell me Pass in blue color but the phone still on the logo screen and did nothing
Click to expand...
Click to collapse
If you successfully flashed cwm via odin. switch off the phone. take out the battery and insert it back.
Connect your data cable to your phone(not to pc). Then press and hold volume up button and switch on the phone. When the samsung logo appears leave the button. When Samsung galaxy s plus logo appears, just tap the menu button(left touch button). You will get in to the CWM recovery. Then wipe data, wipe cache, wipe dalvic cache (in advanced menu). Then flash a new rom.
jabrif said:
If you successfully flashed cwm via odin. switch off the phone. take out the battery and insert it back.
Connect your data cable to your phone(not to pc). Then press and hold volume up button and switch on the phone. When the samsung logo appears leave the button. When Samsung galaxy s plus logo appears, just tap the menu button(left touch button). You will get in to the CWM recovery. Then wipe data, wipe cache, wipe dalvic cache (in advanced menu). Then flash a new rom.
Click to expand...
Click to collapse
yes now i got it Successfully its weird i did the same steps for hours ago now
anyway now i made factory reset and deleted all data
http://forum.xda-developers.com/showthread.php?t=2190459
this ROM i like it
do you recommend me which Good one you know its Effective and good?
and how i flash ROM in Odin because i have no memory card
.NetDeveloper said:
yes now i got it Successfully its weird i did the same steps for hours ago now
anyway now i made factory reset and deleted all data
http://forum.xda-developers.com/showthread.php?t=2190459
this ROM i like it
do you recommend me which Good one you know its Effective and good?
and how i flash ROM in Odin because i have no memory card
Click to expand...
Click to collapse
All ROMs are good. It depends your taste and experience. Custom ROMs can't be flashed via odin. If you have a rom zip file in your internal sd card, you can do the flashing. If not, Flash a stock rom via odin first. Then copy the custom rom zip file to the internal sd card. Switch off the phone. Boot in to recovery as explained earlier. Flash the rom selecting the copied zip. Before that don't forget to wipe data, wipe cache and dalvic cache.
Samsung-Updates.com-GT-I9001_MOB_1_20120605142419_bwu6nc0km1
i have this is this Stock ROM?
or if you have link please can you tell me ? because i never did this i was always do Costume ROMs
nnnnn
jabrif said:
All ROMs are good. It depends your taste and experience. Custom ROMs can't be flashed via odin. If you have a rom zip file in your internal sd card, you can do the flashing. If not, Flash a stock rom via odin first. Then copy the custom rom zip file to the internal sd card. Switch off the phone. Boot in to recovery as explained earlier. Flash the rom selecting the copied zip. Before that don't forget to wipe data, wipe cache and dalvic cache.
Click to expand...
Click to collapse
Samsung-Updates.com-GT-I9001_MOB_1_20120605142419_bwu6nc0km1
i have this is this Stock ROM?
or if you have link please can you tell me ? because i never did this i was always do Costume ROMs
.NetDeveloper said:
Samsung-Updates.com-GT-I9001_MOB_1_20120605142419_bwu6nc0km1
i have this is this Stock ROM?
or if you have link please can you tell me ? because i never did this i was always do Costume ROMs
Click to expand...
Click to collapse
Look at here. http://www.sammobile.com/firmwares/1/
Ok fine. you can use that. or try a newer one
---------- Post added at 12:22 AM ---------- Previous post was at 12:10 AM ----------
Or else you can save all these steps if you can find an External sd card.
jabrif said:
Look at here. http://www.sammobile.com/firmwares/1/
Ok fine. you can use that. or try a newer one
---------- Post added at 12:22 AM ---------- Previous post was at 12:10 AM ----------
Or else you can save all these steps if you can find an External sd card.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2000828
http://forum.xda-developers.com/showthread.php?t=2315448
Well i tried those two now but i noticed that Google play didn't installed with them and i dunno why normally it comes with it
.NetDeveloper said:
http://forum.xda-developers.com/showthread.php?t=2000828
http://forum.xda-developers.com/showthread.php?t=2315448
Well i tried those two now but i noticed that Google play didn't installed with them and i dunno why normally it comes with it
Click to expand...
Click to collapse
Have you flashed gapps after the ROM.?? If yes, flash it again via cwm. Don't use same gapps for these two roms . one is 4.1.2 while other is 4.2.2. Only use the one which provide with the rom.
Hi there, let me say firstly that it is three days I'm browsing XDA and Co. consulting all the (unlucky) unfortunate issues of this kind, but I can't say if there is really one which fits with mine: nothing worked until now, but I want to give it a chance again by writing my own post with your help, hopefully it will aid in future:
I bricked my Galaxy Ace S5380 (GB 2.3.6.) by trying to update CWM from 3 to 5.0.2.6, but it aborted/failed, and when I later rebooted the device, it went black screen.
Since there, I can't enter back into emergency mode or download mode, or rebooting my phone.
So, I updated latest Samsung drivers, killed Kies apps on Win7 to free the way to Odin (Kies is no help: it detects the smartphone but it can't connect and update anything).
I can only enter Odin download mode, but with black screen on my device (no background light, just a deadly black screen as it was off).
The only way to make it detect by Odin on Windows 7 is:
1. pulling off battery and connect smartphone via USB cable to the PC
2. open Odin Multi Downloader (GT-S5830) vers. 4.42 (I also had a try with earlier versions) and prepare Cooper_v1.0.ops and One Package file for firmware (courtesy of Sammobile).
3. pressing at the same time (like a contortionist): volume Up + volume Down + Home button + power button, THEN pulling back the battery: at that point, Odin would detect it ("<1> Detected!!!"), but, nothing happens on Ace's screen (no yellow rectangle appears).
When I press start on Odin, it goes as it follows (and then it stucks there):
Download Start..
<0> Create File...
<1> StartThread Detected: 1
<2> StartThread Detected: 0
[..]
<1> setup connection...
I can plug it off and on again and again: it can still detect it until I press Power button to switch it off.
But it never goes beyond the 'setup connection' step.
I read somewhere that this (being stucked at 'setup connection') may be related when battery charge is too low (I have no replace), but I also read that some say that if you put it in download mode battery still can AC recharge (but there's no way to me to check it is true).
Overall, I wonder if it also does it in Odin download mode.
I tried to use ADB but it does not see the device ("error: device not found").
So, any (real) help?
Thanks for your time!
hi
hi i have same problem... to pass this step.. some days ago i tried to upgrade the phone whit this package http://hotfile.com/dl/132813733/c5eee3c/S5830XXKPH_bysamsdroid.rar.html
for me worked multiple files are better to resurrect the phone try this metod
geo95cornel said:
hi i have same problem... to pass this step.. some days ago i tried to upgrade the phone whit this package http://hotfile.com/dl/132813733/c5eee3c/S5830XXKPH_bysamsdroid.rar.html
for me worked multiple files are better to resurrect the phone try this metod
Click to expand...
Click to collapse
Thanks for your answer, pal. Unfortunately this didn't help me. I already found it here http://droidangel.blogspot.it/2011/06/guide-how-to-flash-updateupgrade.html but I am still stuck at '<1> setup connection..' step.
Tell me, did you really have my same problem? Black screen and uniquely the four-buttons combo able to make it detect by Odin? Because, if so, I want to understand what I do wrong. Thank you again :fingers-crossed:
I have the exact same problem :\ hoping someone has a solution for it ive tried everything!
same problem here too... brick by rom manager
rajju2 said:
same problem here too... brick by rom manager
Click to expand...
Click to collapse
ROM manager + galaxy ace = irreparable brick. You'll have to change your motherboard.
Sent from my Galaxy Ace GT-S5830 using xda premium
Venomous Viper 119 said:
ROM manager + galaxy ace = irreparable brick. You'll have to change your motherboard.
Sent from my Galaxy Ace GT-S5830 using xda premium
Click to expand...
Click to collapse
That's no help, pal. Thanks for trying hard, anyway.
oldslowdiver said:
That's no help, pal. Thanks for trying hard, anyway.
Click to expand...
Click to collapse
No one can help if you used ROM manager. Your ace is dead.
Sent from my Galaxy Ace GT-S5830 using xda premium