Related
HI,
I'm a complete newbie with the Android (power user in WM).
Using SGS i9000 with origin German ROM I9000XXJF3.
I was trying my first ROM reflash, but something seems to be very wrong.
This is what I did:
1. I rooted the device successfully using that guide: http://forum.xda-developers.com/showthread.php?t=728754
2. Downloaded and install from the market busybox
3. Then I followed the guide here: http://samsung-firmware.webs.com/Flash guide english.pdf .
Important, I was trying to install the ROM: I9000JPJG8 BUT with PIT 513
4. ODIN announced (on blue background ): reset, and the device returned into recovery mode (same I used for rooting the device).
5. I was trying to repeat the process, this time with PIT 512 with the same ROM.
6. It seems to successful. I saw the glowing Galaxy S, for sometime, then the device turned itself off.
Now all I get is the connect to PC (phone, orange exclamation mark & PC logos) logo.
I was trying to pull the battery out, restarted the PC, and was trying to reconnect to ODIN, but ODIN does not recognize the device.
I was trying to select in ODIN only "auto reboot", press start, but again nothing happened.
Very frustrating for a start.
Any help would be greatly appreciated.
Amir.
Shalom amir,
go back to download mode and reflash with odin (512 pit). Should do the trick.
I've experienced the same thing before. I thought I bricked the phone but that wasn't the case.
Try to reflash your SGS on another computer. This PC that you used won't be able to find your SGS anymore until you successfully flashed it.
mike.sw said:
Shalom amir,
go back to download mode and reflash with odin (512 pit). Should do the trick.
Click to expand...
Click to collapse
Hi Mike,
After numerous times, I've managed to return to downloading mode
I've achieved that by inserting the battery, while pressing vol down+power+home.
Now was able to reflash, and everything is good.
cavinsoo said:
I've experienced the same thing before. I thought I bricked the phone but that wasn't the case.
Try to reflash your SGS on another computer. This PC that you used won't be able to find your SGS anymore until you successfully flashed it.
Click to expand...
Click to collapse
I did that too, but the problem was how to return to downloading mode..
Almost had a heart attack...
Thanks anyway guys!
I have been stuck on that screen more than I like but have found this to work the best.
1 - power down the device and remove battery / usb connection
2 - connect usb
3 - hold the volume up key while moving to step 4
4 - insert battery
I end up in the download screen everytime and then must start the Ordin3 flash quickly otherwise it just hangs on the download. I appears if I start the download within 15 seconds, works like a charm.
RickCain said:
I have been stuck on that screen more than I like but have found this to work the best.
1 - power down the device and remove battery / usb connection
2 - connect usb
3 - hold the volume up key while moving to step 4
4 - insert battery
I end up in the download screen everytime and then must start the Ordin3 flash quickly otherwise it just hangs on the download. I appears if I start the download within 15 seconds, works like a charm.
Click to expand...
Click to collapse
You are SUCH A LIFE SAVER!!! I tried every other thing on xda and youtube but the above steps are the only one that worked on my vibrant. The trick is to start ODIN ASAP after step 4 and start the flash (after selecting PIT and PDA file) or it won't work if you take your time
This happemed to me too nuty phone was going ibto download mode so I just reflashed it with 2.3.4
Sent from my sgs
kernel: galaxian
Rom: jetpack
Hello,
I have flashed my Galaxy Tab with roto JMI, but it's stuck at the "GalaxyTab / Samsung" boot screen.
I can get into download mode with volume down and power, I can reflash it but in the end it does not boot.
What can i do?
loony
*bump* anybody?
Help please!!! I have the same problem!
I am still having this problem. I am wondering if there is any way how to debug whats happening at the Samsung logo screen. With adb the devices is not detected (it seems not to be detected at the usb controller).
What did you use to flash?
What files did you use?
Give all the info so people can help
Sent from my GT-P1000 using Tapatalk
Hi, I have exactly the same problem.
After upgrade du JMI roto with odin 1.7 (all upload seems to be ok, repartition with p1 and pda file Roto-JMI-Full-v2 no error message) but the device hangs on samsung galaxy tab logo and don't boot.
In my case previous version was pda jj3/phone jid / scs jj2
rsmurdoch said:
What did you use to flash?
What files did you use?
Give all the info so people can help
Sent from my GT-P1000 using Tapatalk
Click to expand...
Click to collapse
Device it GT-P1000 (German/European version)
Bought the device
Got a lot of restarts
Flashed with P1000OXAJM6
Device worked again for some days
Device not booting anymore
Tried reset with different methods (Touch screen, press power; Touch menu button and power button): Sometimes worked, sometimes not
Recently not booting anymore, no trick worked
Flashed Roto Roto-JMI-Full-v2.tar with P1_add_hidden.pit
Device still not starting
Flashed original firmware: GT-P1000_P1000XXJK5_P1000OXAJK5_P1000XXJK5_P1000XXJK5_XX_DBT.zip
Device not starting
Flashed ROTO with Heimdall again (before used Odin only): Device not booting
Thanks!
Same Problem
Im on the SPH-P100, I have the same issue I can access it in Adb the log shows it in stalling all of my old .apks but it never boots past the logo.I have re flashed also but no luck plz help if u can i can post the logcat here but it goes for hrs -_- I assume it loops the process.
loonyt said:
Device it GT-P1000 (German/European version)
Flashed with P1000OXAJM6
Click to expand...
Click to collapse
So, this one contains a bootloader (Sbl.bin). maybe thats the cause of the problem. Still, I wonder why it started in the first place and then after some reboots it gets stuck. I tried different Kernels with no luck. Maybe I should try to flash a new bootloader? However, that could brick the device forever.
Loonyt
loonyt said:
Device it GT-P1000 (German/European version)
Bought the device
Got a lot of restarts
Flashed with P1000OXAJM6
Device worked again for some days
Device not booting anymore
Tried reset with different methods (Touch screen, press power; Touch menu button and power button): Sometimes worked, sometimes not
Recently not booting anymore, no trick worked
Flashed Roto Roto-JMI-Full-v2.tar with P1_add_hidden.pit
Device still not starting
Flashed original firmware: GT-P1000_P1000XXJK5_P1000OXAJK5_P1000XXJK5_P1000XXJK5_XX_DBT.zip
Device not starting
Flashed ROTO with Heimdall again (before used Odin only): Device not booting
Thanks!
Click to expand...
Click to collapse
*bump* Can anybody help?
I have a very similar problem.
I flashed the [ROM] Roto JMI Pre-Rooted Firmware v2 [Feb 4, 2011], and got stuck on the Samsung Boot screen.
Now, I can't even get the Downloading mode to work. It opens fine, but Odin/Heimdall doessn't detect the Tab at all.
Hopefully, someone knows what's going on. If not, I'm taking it back to my carrier, and asking them to fix it (assuming they'll fix it).
Maybe this will help for the bootloader.
Its a bootloader patch. Please read thru the thread. Hope it helps.
http://forum.xda-developers.com/showthread.php?t=888071
Sent from my GT-P1000 using Tapatalk
dlui1 said:
Now, I can't even get the Downloading mode to work. It opens fine, but Odin/Heimdall doessn't detect the Tab at all.
Click to expand...
Click to collapse
Dont get what you mean by that. You cant get it to download mode but your tab start up fine?
Download mode = press vol down + power pn button.
As for odin/heimdall doesnt detect the tab it could be usb port (some reports in android development thread) or could be usb drivers.
As i need to switch usb drivers when i need to flash my tab & my dell streak.
Hope it helps to start you off.
Sent from my GT-P1000 using Tapatalk
Qsilver2001 said:
Dont get what you mean by that. You cant get it to download mode but your tab start up fine?
Download mode = press vol down + power pn button.
As for odin/heimdall doesnt detect the tab it could be usb port (some reports in android development thread) or could be usb drivers.
As i need to switch usb drivers when i need to flash my tab & my dell streak.
Hope it helps to start you off.
Sent from my GT-P1000 using Tapatalk
Click to expand...
Click to collapse
I meant that I can get into Download mode, with the Downloading logo, but doesn't get detected by Odin. And it stays stuck on the Samsung boot logo if turned on normally. Can't get into recovery either.
Before I flashed the Roto ROM, Odin was working perfectly fine. I've been flashing other kernels and ROMs before. But now, the USB doesn't even seem to get detected. It's like nothing is plugged in. Can't even choose to install/uninstall old/new drivers.
I dont think it's the USB port, as I've tried to connect to Odin on 3 different computers, trying every available port on each. It's looking like the USB connector is just dead or something.
My tabs mainboard was broken, it was replaced and now it works again.
Sent from my GT-P1000 using XDA App
Same problem here man. I CAN get in to download mode. Odin recognize it normally. I CAN download normally. Look likes everything is normal, but after update it restarts, but hangs on Galaxy Tab Samsung logo. I've tryed everything with different firmware, custom-roms, hacking things, but with no success.
Can someone please help me?
Same problem here. My tab is stuck at samsung galaxy logo and until now, no one could provide an answer.
I flashed some ROM from samfirmware that must of locked the bootloader (JMF). Then I tried to flash JM6, JMA, JMC, JMK, JJ4, JJ7, JM5, JJ1, JID and almost all ROTO's. with and without pit files using ODIN 1.7. I also tried a stock ROGERS ROM (that i downloaded from this forum) using Heimdall. The tab always boots to samsung galaxy tab logo. I've done alot of reading in this forum and followed many flashing instructions but when applied, it doesn't work for me.
My main concern: is there still hope with the tab ? or it's gone forever.
Is there any specific order that i must follow when flashing ? ( ie, flash one specific ROM before another). The tab was canadian that was flashed to euro.
Thanks for reading my post.
the dbdata file is corrupted.
1) download this file
http://forum.xda-dev...98&d=1290261479
2) extract it
3) use Odin to flash it under the PDA option
-make sure repartition is UNCHECKED
-do not select any pit file
-leave everything else the same
handfree said:
the dbdata file is corrupted.
1) download this file
http://forum.xda-dev...98&d=1290261479
2) extract it
3) use Odin to flash it under the PDA option
-make sure repartition is UNCHECKED
-do not select any pit file
-leave everything else the same
Click to expand...
Click to collapse
Same prob. tab reboots to samsung logo.
Same Here, I tried many combinations with the help of experts on this board. Conclusion: shipped to Sammy for warranty repair.
Hi there.
I have a problem with my Samsung Galaxy Note since I wanted to make it rootable.
When I bought it, I could use any simcard inside, so it is "unlocked".
Yesterday, I wanted to use my phone to root it but some files can't be downloaded via WWW.MULTIUPLOAD.COM (i guess it is because of what happened to MEGAUPLOAD).
So, one of my first questions is : is USB DEBUGGING activated when using the Galaxy note for the first time or not at all? (I didn't activate it when using my Galaxy Note before flashing it)
Second, I have used Odin to flash a file (PDA slot), the file was hard to find but google could help (i'm just meaning that some links here seem to be "broken" on multiupload). The flash was fine and the phone boot back... to a yellow triangle.
No way to change it.
No backup from the rom, but I remember it is a KKA.
I 've looked in that thread ( http://forum.xda-developers.com/showthread.php?t=1350960) to find everything that could help me, but the file is no more on multiupload
I tried via that thread, too :
http://forum.xda-developers.com/showthread.php?t=1370156 , but the problem remains
Third, I don't have any jug usb to use and no CMW installed nor loaded.
Could a kernel help to solve the problem about the yellow triangle, using ODIN, or not? Or is it better to use a fully functionnal rom, as a KKA?
Any help/comment would be much appreciated
N.B : sorry for my english that can be "poor" sometimes :s
Can you exactly give the file name, which you have used to flash PDA section? and size of it
Titek said:
Hi there.
I have a problem with my Samsung Galaxy Note since I wanted to make it rootable.
When I bought it, I could use any simcard inside, so it is "unlocked".
Yesterday, I wanted to use my phone to root it but some files can't be downloaded via WWW.MULTIUPLOAD.COM (i guess it is because of what happened to MEGAUPLOAD).
So, one of my first questions is : is USB DEBUGGING activated when using the Galaxy note for the first time or not at all? (I didn't activate it when using my Galaxy Note before flashing it)
Second, I have used Odin to flash a file (PDA slot), the file was hard to find but google could help (i'm just meaning that some links here seem to be "broken" on multiupload). The flash was fine and the phone boot back... to a yellow triangle.
No way to change it.
No backup from the rom, but I remember it is a KKA.
I 've looked in that thread ( http://forum.xda-developers.com/showthread.php?t=1350960) to find everything that could help me, but the file is no more on multiupload
I tried via that thread, too :
http://forum.xda-developers.com/showthread.php?t=1370156 , but the problem remains
Third, I don't have any jug usb to use and no CMW installed nor loaded.
Could a kernel help to solve the problem about the yellow triangle, using ODIN, or not? Or is it better to use a fully functionnal rom, as a KKA?
Any help/comment would be much appreciated
N.B : sorry for my english that can be "poor" sometimes :s
Click to expand...
Click to collapse
1. It doesn't matter while flashing using PC Odin.
2. Are you sure about which ROM you flashed ( Suspecting you have flashed Custom ROM)
3. Their is way to remove Triangle (!) , you should use JIG
follow the link for more details.
http://forum.xda-developers.com/showthread.php?t=1354888
Thanks for your quick replies
So, I wanted to flash that, using ODIN:
Recovery ClockworkMod Odin flashable.Tar
But on XDA, the link about it is in fact Superuser-3.0.6-efgh-signed.zip.
Did I miss something??
The file I could find using google was about 8Mo and the flash was quite fast.
(I used it for the PDA part)
I also referred to that thread :
(http://forum.xda-developers.com/showthread.php?t=1329360)
dr.ketan said:
---------------------------------------------------------------------------------------------------------------
When No Any other method works to Root your device, use this
---------------------------------------------------------------------------------------------------------------
Note that, this will downgrade your ROM to KJ1, after that you can update it.
Download: http://www.multiupload.com/YB9EL8D8O3
- Make sure your SGN is NOT connected to your computer
- Reboot your SGN into "download mode" (Vol down + Home + Power))
- Start ODIN
- Click the PDA button, and select the "SGN_XX_OXA_KJ1_FACTORYFS.tar" file
- Connect the SGN to your computer
- Make sure "repartition" is NOT checked
- Click the START button
- Wait for the phone to reboot TWICE
- Done.
Now you have your device Rooted, Install Mobile Odin Pro n update your device to any new ROM with Mobile Odin
Click to expand...
Click to collapse
using the file for KKA, but then, next flashing, the yellow triangle...
I'm working right now but I can repost here in a few hours the exact name of the file I have found using google that I could not find over here.
Anyway, do you think I can "repair" it without any JIG USB?
And yes, it was on a custom rom (the phone is just new, only a few hours in my hands ) but it's not my first one (i could flash a HD2 and the Samsung Tablet with no problems...
Titek said:
Thanks for your quick replies
So, I wanted to flash that, using ODIN:
Recovery ClockworkMod Odin flashable.Tar
But on XDA, the link about it is in fact Superuser-3.0.6-efgh-signed.zip.
Did I miss something??
Click to expand...
Click to collapse
This thing you did wrong, I have made lot effort to update Rooting guide here, still somebody How can find this guide i dont know.
Basically you have flashed with Netchip method, which was very first appeared, but later netchip also said, to not to use, b'coz it causing raise Flash counter
as well yellow triangle.
Now onwards remember, NEVER use PC ODIN to Flash Any Custome ROM/Kernel.
I am updating link here soon, how to reset your counter. You requires JIG for that
Edit : here is guide how to reset binaru count, n remove yellow triangle
http://forum.xda-developers.com/showthread.php?t=1354888
-------------------
BTW till you get JIG, just go to this thread http://forum.xda-developers.com/showthread.php?t=1424997 and download and flash ROM using PC odin(here it is stock ROM u can use it safely). you will get your phone working. later you can reset counter with JIG
Download my guide from here, how to update ROM, you can use Updating ROM with PC Odin section from guide.
Many thanks again, dr.ketan for such reply so fast
Hmmmm then I will have to wait for a JIG. I will order a JIG, it seems the price is not so expensive.
Thanks again for your comments and help, much appreciated
Ya jig is costing just 1-2 usd
Sent from my GT-N7000 using xda premium
dr.ketan said:
Ya jig is costing just 1-2 usd
Even you can make it at home, guide link is inside previous msg (how to use jig)
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Sent from my GT-N7000 using xda premium
My 2 cents about that question, but if I have a message saying that there is an error while turning on the phone now :
Firmware upgrade encoutered an issue. Please select recovery mode in Kies & try again.
The problem is, when using Kies (for Windows), it is looking for the Galaxy Note, and, even if it is connected via USB, nothing happens, it's looking long, long, long, time, then, it says that it can not find it.
So, is a JIG still required?
Titek said:
My 2 cents about that question, but if I have a message saying that there is an error while turning on the phone now :
Firmware upgrade encoutered an issue. Please select recovery mode in Kies & try again.
The problem is, when using Kies (for Windows), it is looking for the Galaxy Note, and, even if it is connected via USB, nothing happens, it's looking long, long, long, time, then, it says that it can not find it.
So, is a JIG still required?
Click to expand...
Click to collapse
See, JIG is required for totally different reason.
Your issue regarding, not connecting kies / Booting phone, won't be solved by JIG.
Jig can b use in two condition. One when you are unable to enter in download mode. I think, you dont have this issue
another To reset counter, for which you require JIG in your case.
Error you are facing right now during booting of device, can be solved by Reflashing ROM. You can flash any stock ROM with PC Odin, shud be enough to solve it.
Now regarding use of JIG, just enter in download mode, check Lt upper corner of devoce, it will have number of flash you have performed, i think in your case it must be 1 or more. which in normal case should be zero. Only To reset that counter, you needs Jig.
Thanks again.
Well, I download another stock rom but I got a "fail" (red color) above "id:com", when flashing on ODIN.
I am using Windows7 and tested the compatibility mode, the problem remains.
I have .md5 file that I put on PDA part. Then I click on Start but nothing, except the "fail" message.
When turning off the phone and on, I got the other message, said in my previous post :
"Firmware upgrade encoutered an issue. Please select recovery mode in Kies & try again."
So, Am I missing something.
About the download mode, the number is 7 in fact.
Oh I remember the file I wanted to flash via ODIN : netchip-cwm-update2.tar
It seemed to work just because the phone turned off and I got a "green" message that said that it was ok. (PASS).
I read one of your thread, when nothing works, so that man should go here :
http://forum.xda-developers.com/showpost.php?p=18981227&postcount=4
but the file (link) is not working now, so I can not get the file to test :s
But since then, I can not boot on Android anymore...
Yes unfortunately link is down since 2 days
Ya thats i guessed when i read you have used superuser zip, i have said earlier in 1 msg, you have used netchip.
Anyway, once go to recovery (vol up +home+power)n wipe data, clear cache, clear dwlvic caxhe.
Then put phone in download mode. Close firewall/antivirus on pc, open odin, connect device with download mode(vol down+home+power), if id com glow yellow, thn proceed with start
Gudluck
Sent from my GT-N7000 using xda premium
The main problem is that, too.
I can not enter Recovery, I got the yellow triangle.
I can only go in download mode, and when turning off and on the phone, the message said above :s
is JIG the only way to solve all that?
is my phone "blocked"? I am trying to test another stock rom, I'll give it a try and let you guess what happens.
EDIT 22:37:
The flash with that rom (N7000XXLA4_N7000DREKL1_DRE) has failed, even if it is a stock one.
Can I try to use any other rom from another country? Before I tried to flash the rom, I saw it was a KKA. Can I try so with a LA3 or something else, still stock one?
Oh man, that's so bad....
I think I found the problem...
I am using Windows7 64 bits.
My wife is on WindowsXP and I am using Odin on her netbook, and it's quite better !
the flashing is going on.
Hey !!!! that's all good !!!!! ^^'
My Galaxy Notes is working again ^'^'
Maybe should it be mentionned to be careful when using Windows7 64 bits, if some other members would have the same problem when flashing their roms?
Congrates !
ya it is common problem(win7), many time it has been discussed , but it is not that everytime it not works, but it happens in few cases.
When reading your answer yesterday, I thought I might had a chance to make my Galaxy Note working again without JIG.
Now I've downloaded Samsung drivers, for Windows7 64 bits, and I can flash with no problem. I'm backing up and can use CWM
Thanks again for your help and answers
I had the same problem, but then I decided to use the ORIGINAL usb cable and see: it did the trick !!!. Even on Windows 10 64bit !.
Hi everyone. Im not normally in this section as i have an x8 but my friend has seen all the roms,mods and updates ive done so he tried to do it to his galaxy s i9000 without rooting or unlocking his bootloader. I asked him what he did he said he just tried to update software with keis but now it wont turn on just white screen with a red triangle in the middle i hope its download mode as i dont have a galaxy i dont really no but the battery has died and it wont charge im guessing hes damaged the bootloader am i right and if so whats the best corse of action to tepair it. Thanks.
You can check if it is in download mode by pluggin it in pc with odin. See the wiki page what it says about soft brick.
Soft-Bricked
After flashing a rom you might not be able to enter the Download Mode by pressing Volume Down + Home + Power. In this case a so called 'JIG' would be helpfull.
You could build it on your own: [HOWTO] [REF] Get Download Mode without 3-button combo using homemade JIG
... or buy a preassembled one on a well known marketplace.Hint: There is no difference between a JIG for Samsung S/S2 or S-Plus.
See if you can go into d0wnload mode with vol down home and power. If that works go and try to find the stock firmware for the phone and download and extract. Download odin and put csc pda and phone/modem in there rightful places. 512 pit in pit section. Pit usually comes with odin download. If not find it somewhere. Repartition checked and hit start. It should reboot when done. It will problaby take a couple of min to boot but be patient. If it starts to go into boot loop put back into download mode again and reflash. Its very hard to mess up the phone to where you cant fix it. So relax and watch tuts or whatever helps you best. I know of a link i that i will find and post for you when i do.
Sent from my GT-I9000 using XDA
http://forum.xda-developers.com/showthread.php?t=1102881
Sent from my GT-I9000 using XDA
DEAD bricked phone
So, my friend's phone (hopefully she'll stay my friend after this) was turning itself on and off all on it's own. So I (no good deed goes unpunished) suggested that I will upgrade her firmware for her. She had 2.3.3 firmware. I downloaded the odin1.7 as well as a package of all the info for 2.3.5 firmware upgrade. I flashed the phone- originally only using the PDA option with a file called: CODE_I9000XXJVS_CL565837_REV03_user_low_ship
It worked, the phone restarted and showed the firmware as being 2.3.5.
I don't know why, but I thought it would be a good idea to update the CSC and the pit and the modem as well- so I did that. when this was finished - though odin said that the flashing was successful the phone is completely unresponsive. The computer doesn't recognize it, it doesn't show any signs of life at all- like it's in the dark ages and there is no electricity in it.
HELP!!!
First question: do you think a jig will work? how dangerous is it?
second question: is there any other option to try that I haven't come across other than changing the motherboard, and if there isn't do you know where I can get one, bear in mind I live in Israel.
Please e-mail me a copy of the response to [email protected] if you can...
Odin dosnt pick it up atall plus the batteries dead aswell now and the stupid thing wont charge so i cant evan try any thing till i find away or some one to charge it but thanks for the tips.
gavster26 said:
Hi everyone. Im not normally in this section as i have an x8 but my friend has seen all the roms,mods and updates ive done so he tried to do it to his galaxy s i9000 without rooting or unlocking his bootloader. I asked him what he did he said he just tried to update software with keis but now it wont turn on just white screen with a red triangle in the middle i hope its download mode as i dont have a galaxy i dont really no but the battery has died and it wont charge im guessing hes damaged the bootloader am i right and if so whats the best corse of action to tepair it. Thanks.
Click to expand...
Click to collapse
Try to recharge the battery from other phone or use another battery.
Check whether you have the download mode working. (Home+Power+Volume down)
If yes, put phone in download mode and flash Darky RE or any other Rom via ODIN. Try to get the recovery mod after rooting and then try ROMs.
Or try restarting the phone it may work without update also. Long press power in download mode restarts the phone. However be careful.
What is the status of the device can you go to download mode
Post your firmware files name and how you choose in the odin flasher.
Dont try anything crazy you will bricked your device more:banghead:
Sent from my GT-P1000 using XDA
Alternate way to Download mode
Hi gavster26
I have been there with a buddy's phone... not a nice place.
Found a link showing this other trick ... but you have to trial and error this one on the different combos:
1. Phone off
2. USB cable pluged in
3. Odin running
4. Down (or Up - test both) Volume button + Home button + plug in the USB cable.
This booted my dead "bricked" phone into download mode.
Try it.
Hi
I just got sometime today to upgrade my old samsung galaxy s i9000(India), it was on gingerbread and just cheked with Kies which showed me an available upgrade, so I just factory reset my phone, and proceeded with upgrade, somewhere down the process, it said kies did not recognise my phone and asked me to disconnect and remove battery and boot again, i tried that and since then I'm stuck with a phone+!+comp icon on the screen, please help its urgent, I have to travel out tomorrow morning, i cant afford to go to samsung on this.
Thanks a lot in advance
jjake47 said:
Hi
I just got sometime today to upgrade my old samsung galaxy s i9000(India), it was on gingerbread and just cheked with Kies which showed me an available upgrade, so I just factory reset my phone, and proceeded with upgrade, somewhere down the process, it said kies did not recognise my phone and asked me to disconnect and remove battery and boot again, i tried that and since then I'm stuck with a phone+!+comp icon on the screen, please help its urgent, I have to travel out tomorrow morning, i cant afford to go to samsung on this.
Thanks a lot in advance
Click to expand...
Click to collapse
Flash a desired firmware from Sammobile. using odin
Make sure that pit file is used
jjake47 said:
Hi
I just got sometime today to upgrade my old samsung galaxy s i9000(India), it was on gingerbread and just cheked with Kies which showed me an available upgrade, so I just factory reset my phone, and proceeded with upgrade, somewhere down the process, it said kies did not recognise my phone and asked me to disconnect and remove battery and boot again, i tried that and since then I'm stuck with a phone+!+comp icon on the screen, please help its urgent, I have to travel out tomorrow morning, i cant afford to go to samsung on this.
Thanks a lot in advance
Click to expand...
Click to collapse
you can reconnect it to kies, as it is still on download mode to do recovery like this
http://www.4shared.com/office/koYpRWc1/KIES_update_recovery.html
re you can download a firmware according to your location and flash with Odin
jjake47 said:
Hi
I just got sometime today to upgrade my old samsung galaxy s i9000(India), it was on gingerbread and just cheked with Kies which showed me an available upgrade, so I just factory reset my phone, and proceeded with upgrade, somewhere down the process, it said kies did not recognise my phone and asked me to disconnect and remove battery and boot again, i tried that and since then I'm stuck with a phone+!+comp icon on the screen, please help its urgent, I have to travel out tomorrow morning, i cant afford to go to samsung on this.
Thanks a lot in advance
Click to expand...
Click to collapse
are you able to get into download mod or totally not boot up at all
The only solution si to flash a new firmware using odin
Sent from my GT-I9000 using xda app-developers app
Go back to the original India ROM - https://www.fixmystuff.in/FMS_Forum/threads/samsung-galaxy-s-gt-i9000-flashing-to-original-rom.46/
i update my phone using odin with pit file .
now phone not starting any help..
AW: Phone not booting after failed firmware upgrade-urgent
same screen as before?
now phone not booting up at all..
AW: Phone not booting after failed firmware upgrade-urgent
sorry but i'm no expert :/
Does Odin show a connection?
Maybe you can build a so called JIG.
same issue
Hi,
I am in same situation. did it get resolved?
I have GT I90003 which is now not booting and remaining on 'Phone-I-PC' image.
I was using Odin to root but in between cable got disconnected. and now I am nowhere.
Please help how to resolve this problem.
Thanks,
Bhupendra.
see here for firmware n juz change usb port if needed
http://forum.xda-developers.com/showthread.php?p=14933114
or use DDLF1 or DDMF2. Search it using search box in xda.
n dont use i9000 rom for i9003 rom, it will hardbrick ur device, u can search for i9003 post discussiom using searchbox in xda
Sent from my GT-I9000 using xda premium
i have the same problem
i was trying to update my phone and the cable usb move now i have just a black screen with a phone icon + triangle alert+ computer icon. And the problem is that my cellphone doent connect with the computer.
is a samsung s captive. could you help me
Zaddiel said:
i was trying to update my phone and the cable usb move now i have just a black screen with a phone icon + triangle alert+ computer icon. And the problem is that my cellphone doent connect with the computer.
is a samsung s captive. could you help me
Click to expand...
Click to collapse
You have to try again to get it into download mode.
Use Odin for your device model and run it as administrator. If Kies is installed, kill all Kies processes by using Task Manager. Prepare the files under PDA etc. Pull out the battery and hold power button pressed for 1min. Then keep all buttons combo for download mode and insert the battery while pressed (needs some acrobacy skills). If the download mode starts, you can connect your phone and flash firmware again.
tetakpatalked from Nexus 7 flo
thank you
tetakpatak said:
You have to try again to get it into download mode.
Use Odin for your device model and run it as administrator. If Kies is installed, kill all Kies processes by using Task Manager. Prepare the files under PDA etc. Pull out the battery and hold power button pressed for 1min. Then keep all buttons combo for download mode and insert the battery while pressed (needs some acrobacy skills). If the download mode starts, you can connect your phone and flash firmware again.
tetakpatalked from Nexus 7 flo
Click to expand...
Click to collapse
Thanks it really works
Zaddiel said:
Thanks it really works
Click to expand...
Click to collapse
Great, mate
BTW, hitting the thanks button would do more than words
tetakpatalked from Nexus 7 flo