[Q]how to install windows in htc hd7 t9292 - HD7 Q&A, Help & Troubleshooting

i have a new hd7 phone but there is nothing in this phone ....so please help me to install a window in my phone.....

gauravjaipur said:
i have a new hd7 phone but there is nothing in this phone ....so please help me to install a window in my phone.....
Click to expand...
Click to collapse
use the goldcard method and you'll be fine

faustolg said:
use the goldcard method and you'll be fine
Click to expand...
Click to collapse
is it works...???? my phone doesn't response while put battery on it and press power key. it only vibrate 3 times....

guys it's not working.....my phone is completely dead......so please help me...

gauravjaipur said:
guys it's not working.....my phone is completely dead......so please help me...
Click to expand...
Click to collapse
That looks more like a hardware failure than a soft one. Take it to a repair shop and have it tested.

HTC HD7 need to be flashed
my HD7 is down, when I start it, it just succed to reach the green HTC logo it seem that all have been Erase, I took a look on internet and it seem that it is possible to flash it back to initial factory status. (need some RUU****** files) I am not a developper, just try to find the name and location of right files (to download) to "wake up" my smartphone.
thanks everybody for your help and support.
please do'nt pay attention to miss write i am french.

pcrombez said:
my HD7 is down, when I start it, it just succed to reach the green HTC logo it seem that all have been Erase, I took a look on internet and it seem that it is possible to flash it back to initial factory status. (need some RUU****** files) I am not a developper, just try to find the name and location of right files (to download) to "wake up" my smartphone.
thanks everybody for your help and support.
please do'nt pay attention to miss write i am french.
Click to expand...
Click to collapse
Follow this http://forum.xda-developers.com/showthread.php?t=1676794
The ROM's can be found here http://www.androidfiles.org/ruu/?developer=Schubert

Related

Can't reboot after upgrade to XDA IIs Chinese

Today, I upgrade my HK XDA2s from eng to chinese, the chinese rom which was download from ftp , named "XDA_IIs_Chinese_CHT_1.31.00_ ExtRom_1.31.900_Radio_1.08.00.rar" (Thanks the giver)
During the installation, I have successfully to edit the 3 rom header file to avoid the country ID problem.
All thing go well, and the PC screen saying "Congradulation" at last.
However, after I soft reset my XDA 2s, the device hang on the start up screen, can't reboot further more.
Can anyone tell me how to solve it OR any steps I miss ?
Thanks
Did you do a Hard reset (power and reset) after the install like it told you to do on the screen?
MDAIIIUser said:
Did you do a Hard reset (power and reset) after the install like it told you to do on the screen?
Click to expand...
Click to collapse
Thanks MDAIIIuser reply.
After seeing the PC screen said "Congradulation"
I've try 1) Softreset and 2) hardreset too
But the problem stilll exist.
Thanks
Sorry, can't help out! never been down that path, alas wiki has no info on that issue.
MDAIIIUser said:
Sorry, can't help out! never been down that path, alas wiki has no info on that issue.
Click to expand...
Click to collapse
Thanks MDAIIIuser, you already help me a lot.
Hope other member who 've encounter the same problem can sharing with us.
Furthermore, MDAIIIuser, while using the rom mention above
"XDA_IIs_Chinese_CHT_1.31.00_ ExtRom_1.31.900_Radio_1.08.00.rar"
which is download from ftp server.
After upgrade, the start up screen is "Qtek" with KPN wording. It is very strange that why the chinese rom got "Qtek" wording.
It is there have something wrong on that files ?
You did what we all would have done, sorry that it was a waste of time.
This is another case of
FUNNY HA HA ... NOT
Check the thread on the t-mobile new rom found (cant post link am on mda). Here you will see that i found a new rom on ftp, posted it to wiki, downloded it and then cooked it to find out that it was a qtec rom.
What a waste of time that was.
We have one very sad person that thinks its funny to delete Ftp files, Ftp dirs and now post files that he/she knows would intrest some of us based on the threads that have been posted.
I for one will take more care when posting to wiki, pity as it takes the fun away.
after i finished update, i discover this topic....
I also hit this problem right now.
Can anyone tell me what can i do?
Dont think amy of our CHT are good, might try to download then and see if they work.
The link is in wiki, see my signature, you need the page with ship.exe in it.
idox said:
after i finished update, i discover this topic....
I also hit this problem right now.
Can anyone tell me what can i do?
Click to expand...
Click to collapse
Tell me which CHT ROM you did and how you flush Rom , maybe I can help,I try all CHT Rom in here except Dopod114 ROM was broken others all can flush,pm to me or replay in here I will help same as MDAIIIUser help me.
My new XDA IIs got a same problem here. It's dead. Anybody got a solution?
Do not worry. I have got the same problem before. I suggest you just flash back to your own rom.
bbrcn said:
My new XDA IIs got a same problem here. It's dead. Anybody got a solution?
Click to expand...
Click to collapse
re-flushing rom again , it's happen to me before,if you see usb 2.07 that need to re-flush again
Thanks for you two reply.
Yes I had thought about to it that way. But my problem is more serious the XDA stop at start screan the computer even can't detected it. I can't even do synch how can I flush it back? Is there any other way like "PC safe mode"? Anybody got a idea?
OK, move battery out wait 15 min , and put it back ,also reboot your pc,if don't work , try to remove and re-install ActiveSync .
try to doing soft reset first.
Thanx MWang.
Yes I tried what you said, still not working. The xda freezed at the first second it start. I think that is why pc can't detected it. Also soft reset will only turn off the xda and it won't start unless you use hard reset.
bbrcn said:
Thanx MWang.
Yes I tried what you said, still not working. The xda freezed at the first second it start. I think that is why pc can't detected it. Also soft reset will only turn off the xda and it won't start unless you use hard reset.
Click to expand...
Click to collapse
ok YOU DIDN'T SET ON Boot Loader Mode,TRY by pressing the camera button, power button and then the reset button and hold for a few seconds THAN YOU WILL SEE USB V-2.07 THAN PUT IN THE cradle THAN FLUSH YOU NEW ROM, I THINK SHOULD WORKING.
It do works by press voice record, power, reset together! :? Anyway it works again, just great!!
I'm really appriciated for your help mwang thank you!

IS anyone have the MTeoR CPU?

My MTeoR does not work after i update rom...
it means I have to replace its Cpu,But now there was no that in chinese market,can anyone help me ?
the cpu was produts of SUMSUNG,
the MTeoR was the first one 3G smartphone ...
please content me with MSN:[email protected] or E-mail:[email protected],or sms:+8613580916347
what does your phone do now??
futureshock said:
what does your phone do now??
Click to expand...
Click to collapse
Don`t care about these lame request - a person doesn`t know what he needs. if it doesn`t boot after update, a new cpu/memory will give the same result. he needs to reflash his phone via jtag or send to HTC europe/asia
sp3dev said:
Don`t care about these lame request - a person doesn`t know what he needs. if it doesn`t boot after update, a new cpu/memory will give the same result. he needs to reflash his phone via jtag or send to HTC europe/asia
Click to expand...
Click to collapse
i know but when the persons post the request better maybe we can help him...
I am so sorry,my English is poor!
My phone does not boot after update,can not enter the bootloader screen(which has only red green black color)
if its not possible to turn phone one... (just try to remove the accu befor) then you should send it to repair... because then we cant help you and i think the device will be changed ....
starting in bootloader should everytime possible...
look in to wiki how to enter bootloader...

How to put Herald in boot loader mode ?

Hello,
I've searched a lot how to put the Herald in the boot loader mode.
Please, help me.
Thank you advance.
LAter edit: i found out: i had to keep pressed the camera button lol
If you searched a lil bit more you'll find that piece of info in herehttp://wiki.xda-developers.com/index.php?pagename=Herald_Resets
in the Wiki herald section
sandibad said:
Hello,
I've searched a lot how to put the Herald in the boot loader mode.
Please, help me.
Thank you advance.
LAter edit: i found out: i had to keep pressed the camera button lol
Click to expand...
Click to collapse
and in nearly everypost about unbricking and flashing.
Pleas read, read, read.
and btw: commmanager + camera + softreset.
Looking for
In fact, i read houdreds of time all the posts... at 5 AM...
Because by Herald was in the "white screen" and i was desperate...loking for solution ...
In fact, I have to wait for the official WM6 because that one didn't worked for me.
Thks for assistance.
papamopps said:
and in nearly everypost about unbricking and flashing.
Pleas read, read, read.
and btw: commmanager + camera + softreset.
Click to expand...
Click to collapse
No need to press comm.button. Just press camera and softreset at once, release the softreset first than camera button. That's all!
nugift said:
No need to press comm.button. Just press camera and softreset at once, release the softreset first than camera button. That's all!
Click to expand...
Click to collapse
OK. Thanks
BTW - my device is unbricked. BUT it was made by repairservice - for warenty. lol.
I´m happy again. Hehe
papamopps said:
OK. Thanks
BTW - my device is unbricked. BUT it was made by repairservice - for warenty. lol.
I´m happy again. Hehe
Click to expand...
Click to collapse
Damn you did not have to pay?? sweet!
Newbie here.....
I have an HTC P4350. During the upgrade, there was a disconnect with my computer to the phone, now I have that colored screen when I start up. I tried the hard and soft reset and also the Boot loader method.
Anyone have any other suggestions?
Do you think if the phone went back to HTC, they would be able to fix it?
Thanks for your help
You should be able to flash the original RUU when you're in bootloader mode ('the three colored screen') and connected to the PC with your USB cable. Worked for me anyways.
Just put your phone in bootloader mode, connect it to your computer and run the RUU.
R_phAn said:
You should be able to flash the original RUU when you're in bootloader mode ('the three colored screen') and connected to the PC with your USB cable. Worked for me anyways.
Just put your phone in bootloader mode, connect it to your computer and run the RUU.
Click to expand...
Click to collapse
The problem is that it won't connect to the computer via activeSync, until that happens the phone cannot be updated.
passmoregas23 said:
The problem is that it won't connect to the computer via activeSync, until that happens the phone cannot be updated.
Click to expand...
Click to collapse
Have you tried it before you said that it would not work? Seriously? When in bootloader mode, the computer doesn't connect via activesync (how could it, there is no operating system on the phone). Get into bootloader mode, connect the phone to the computer (yes, i know activesync doesn't show a connection at this point) and run the stock RUU for your device. If this does not work, then there is something seriously wrong with your device.
I honestly wish people would try things first before claiming that it didnt work, I know i have not posted that much, but that is because i search the forums for the questions i have, rather than wasting the time of the people who are doing all the cooking (for free might i add) and getting on their nerves.
dcmtnbkr said:
Have you tried it before you said that it would not work? Seriously? When in bootloader mode, the computer doesn't connect via activesync (how could it, there is no operating system on the phone). Get into bootloader mode, connect the phone to the computer (yes, i know activesync doesn't show a connection at this point) and run the stock RUU for your device. If this does not work, then there is something seriously wrong with your device.
I honestly wish people would try things first before claiming that it didnt work, I know i have not posted that much, but that is because i search the forums for the questions i have, rather than wasting the time of the people who are doing all the cooking (for free might i add) and getting on their nerves.
Click to expand...
Click to collapse
To add to this, when in bootloader and plugged into your PC, it will say "USB" at the bottom. That's how you know it's connected properly.
If you're having troubles and you're running Vista...
http://www.modaco.com/RUU-Vista-done-u-t252977.html
dcmtnbkr said:
I honestly wish people would try things first before claiming that it didnt work, I know i have not posted that much, but that is because i search the forums for the questions i have, rather than wasting the time of the people who are doing all the cooking (for free might i add) and getting on their nerves.
Click to expand...
Click to collapse
Dude, I have searched for a resolve to my problem, and I do appreciate peoples help. I don't waste time of good Samaritans. I did run the RRU and I received an 260 error, which is another topic which I did research on as well.
I'm going to send the phone back to HTC and let them fix it.

T5355 stuck on "TOUCH Diamond2" screen

Hi guys!
I have been trying everything that I could find on XDA to fix my problem.
I got this HTC clone a few weeks ago, and it was working fine.
I decided to install a UI on it and it worked fine. After a while I got bored of the UI, so I decided to uninstall it. After the uninstall, the device indicated that it needed to be restarted. I did that, but after it rebooted, it started to reinstall Windows Mobile 6.1. I was annoyed by this, but was like, whatever, and let it continue.
Where the real problem started was when the device froze up (I left it alone for over an hour, but there was no change).
I then had to pull the battery. After I put the battery back into the T5355 it just keeps getting stuck on the "TOUCH Diamond2" screen.
I tried all the hard reset and soft reset tricks I could find and have no been able to either setting it back to factory or bootloader mode.
I was able to find a post that described how to place the boo.ini, flash.bin, and loader.bin file onto my micro sd card. I was able to to get the boot.ini an flash.bin files, but can't seem to find a loader.bin file (it that the actual OS rom?). I then found a post that showed how to use HiSilicon IDT to force the install of the OS Bin file (C02_HTC_20091102_R2127_英全视角B包.bin).
I followed the instructions on placing the T5355 into "Download" mode and pushing the OS bin fine to it.
I am able get the IDT software to detect the T5355 and start pushing the install, but the damned thing ends up giving an XLDR error.
PLEASE! PLEASE! Somebody help me! This phone is brand new and really want to get it working again.
Model: HTC(?) T5355
Please help me someone!!
Is there anyone out there that can help me???
I am so frustrated and can think of what else to do!
The biggest problem I have is that I can't use ActiveSync. If I could use that I wouldn't have much trouble.
Does anyone know how to use HiSilicon's IDT properly? The instructions I was working off of are in Russian. I think that a need a loader.bin file for the T5355 that I can put on my micro sd card...or maybe not...I don't know.
I just really want to get this device back to factory settings.
Please someone take pity on me!!!
enter bootloader [those orizontal strange colors]
try flashing a new rom. you may search and download the original 6.5 build from HTC
to enter bootloader, press "volume down + shutdown button" and then flash the rom
ATENTION: plug the USB cable, wait a few seconds, you should see USB on the lowest white color, then do the flashing job
I don't think you would be experiencing these problems with an original topaz
Please take care this is a HTC CLONE
Pisca said:
Please take care this is a HTC CLONE
Click to expand...
Click to collapse
oups, I'm high resolution on monitor, I thought it was saying "done" not "clone" ) ... there's a thread dedicated to china clones, look here http://forum.xda-developers.com/showthread.php?t=619643
run with a rom in bootloader, it shud work
enter bootloader [those orizontal strange colors]
try flashing a new rom. you may search and download the original 6.5 build from HTC
to enter bootloader, press "volume down + shutdown button" and then flash the rom
ATENTION: plug the USB cable, wait a few seconds, you should see USB on the lowest white color, then do the flashing job
Click to expand...
Click to collapse
DalvuS, thanks for the reply, but the issue is that I can't seem to get into bootloader mode . I wish I could. The T5355 seems to be stuck in the middle of wm 6.1 install. I need to somehow wipe the install and be able to push a reinstall back to the device.
I don't think you would be experiencing these problems with an original topaz
Click to expand...
Click to collapse
Exca that comment doesn't help me. It just makes me more sad. I was gipped when I bought the phone . I thought I paid for a "real" Diamond 2.
If you can't to catch the bootmode, looks like hardware problem.
You can't to repair it at home, imho. Try the specialized service.
..............
... and: are you sure about key combination for bootloader screen for CLONE?
Hello people, how can i dump my rom from my phone (mfu w71) for backup, because i cannot find any rom in english only in chinese. I started to dump the chinese rom with some chinese kitchen (K3系列ROM工具), but i'm stuck. I do not know to do anymore i have extracted ROM, SYS folder. I think it would be good to start another section on this forum for the chinese phones.
Some help from experienced cookers would me be much apreciated.
My T5355 is up and working!!!
Thanks to everyone who replied to my post!!!
I discovered that the problem was that the PC I was attempting the install from was running an AMD based processor.
I tried on the family laptop (which runs an Intel processor) and the install worked!
I AM SOOOO HAPPY!!!
b0gdi good luck with your issue. Try doing a search here in XDA for "dump my phone".
nothing[switched off] -> press start -> command -> bootloader -> bootloader commands -> system start -> play
checking one by one by interfering would have done the trick
I'm glad to hear that... so now you're ok
NEXT !
help me please
i Have Flash my phone 100 times with IDT for WM6.5 and WM6.1 all the versions my phone is T5355 Hot D2 but in one day i flash a rom that kill my phone the phone are conntinue to work but no screen picture only light i have try some russian Rom that kill my phone
the phone was been on guerant so i send him back to my supplier thay fix the phone but the factory said that thay need to change the screen so now thay really change the screen and the phone back to me with WM6.1 some New version 20.1.2010 some think like this i have made a call but the phone hang up and not make calls so i try to put him Back the WM6.5 English ROM that i use with this phone before i try to Flash Russian ROM that brake me the picture of the phone and block me the Bootloader Combination of SEnd+End+Power so that way i send him to repair .
so i try the English Rom that i have use before he DOwnload the Flash Fine but now the screen are stop to show picture But the Bootloader are work fine
so i try all the Roms that i have and all the same the screen dont want to show picture
some body have a same problem or can help me with this ?

T-mobile G1(Dream110)-bricked : HELP :o)

Hi all,
have some problem with T-mobile G1.
In first, its not mine, but my friends.
He was trying to do ROOT + flash eclair rom.
But he was unsuccesfull.
I tell him, I will write here and maybe, if all goes fine, repair his G1.
I realy dont know, what all he was trying with it.
But when i get it to my hands G1 was stucked on showing logo T-Mobile G1.
So where can be problem? And how can i repair it? )
Now Im going to read all forums about G1, cuz I have it in my hands for first time.
So if anybody can help i will be happy )
MiTMaNeK said:
Hi all,
have some problem with T-mobile G1.
In first, its not mine, but my friends.
He was trying to do ROOT + flash eclair rom.
But he was unsuccesfull.
I tell him, I will write here and maybe, if all goes fine, repair his G1.
I realy dont know, what all he was trying with it.
But when i get it to my hands G1 was stucked on showing logo T-Mobile G1.
So where can be problem? And how can i repair it? )
Now Im going to read all forums about G1, cuz I have it in my hands for first time.
So if anybody can help i will be happy )
Click to expand...
Click to collapse
I can help, but need more info. Tell me about the process you used to root and flash.
What happens if you turn on the phone while holding down the home button?
How about if you power on while holding the camera button?
I can help, but need more info. Tell me about the process you used to root and flash.
Click to expand...
Click to collapse
In first, thx for answer
What I know(I asked owner of this bricked G1):
1)He make ROOT with GoldCard
2)After that he flash SPL
3)Flash this ROM: http://forum.xda-developers.com/showthread.php?t=598973
But not working, so he made point 2 and 3 again .. still dont work.. dont know if he tried it again..
What happens if you turn on the phone while holding down the home button?
How about if you power on while holding the camera button?
Click to expand...
Click to collapse
nothing =(
EDIT : Its realy firts time when I got Andorid phone in hand, I can repair bricked Raphael, but I realy dont know what with this and what all i need in my computer.
MiTMaNeK said:
In first, thx for answer
What I know(I asked owner of this bricked G1):
1)He make ROOT with GoldCard
2)After that he flash SPL
3)Flash this ROM: http://forum.xda-developers.com/showthread.php?t=598973
But not working, so he made point 2 and 3 again .. still dont work.. dont know if he tried it again..
nothing =(
EDIT : Its realy firts time when I got Andorid phone in hand, I can repair bricked Raphael, but I realy dont know what with this and what all i need in my computer.
Click to expand...
Click to collapse
I am guessing they flashed Haykuro's special (i.e. danger or death spl) since they wanted an eclair ROM. Furthermore, I am guessing they did not flash the updated radio before the SPL?
Either way, since nothing happens when holding home, or camera, I am sorry to say you have a brick.
Thx )
Yea, I know, its a brick, while Im reading all forums about bricked G1... but there must be way how to repair it =D
MiTMaNeK said:
Thx )
Yea, I know, its a brick, while Im reading all forums about bricked G1... but there must be way how to repair it =D
Click to expand...
Click to collapse
As of yet your options are to send it to HTC to have it fixed, replace the motherboard, or follow this thread
http://forum.xda-developers.com/showthread.php?t=591048
Maybe these guys will figure it out.
Thx for this link, Its last hope for my friends G1 =), or buy used broken G1 with good motherboard =)
In all the cases I've read about if you can't access bootloader and recovery then your phone is bricked for good, but if you can access at least one of them your phone can still be fixed
Its fully bricked. So Power+ Cam and Power + Home dont work, maybe they found the way how to repair it )

Categories

Resources