Hi,
I've downloaded Ripper ROM V17 from the i9305 part of the forum and copied it to my SD card. I have done a clean factory reset and cleared the cache before install.
In Android System Recovery <3e> when trying to install the .zip file, the phone can find and open the file but hangs on verification. The following message is displayed.
E:signature verification failed
A search has turned up one similar problem but nothing the same and nothing that can help me resolve this. Please can someone offer some guidance or ideas as to what I could try?
Many thanks.
If its any help the phone is the i9305 LTE running on the UK EE network
s13b said:
Hi,
I've downloaded Ripper ROM V17 from the i9305 part of the forum and copied it to my SD card. I have done a clean factory reset and cleared the cache before install.
In Android System Recovery <3e> when trying to install the .zip file, the phone can find and open the file but hangs on verification. The following message is displayed.
E:signature verification failed
A search has turned up one similar problem but nothing the same and nothing that can help me resolve this. Please can someone offer some guidance or ideas as to what I could try?
Many thanks.
If its any help the phone is the i9305 LTE running on the UK EE network
Click to expand...
Click to collapse
this is not the problem must pass CWM recovery after install Ripper ROM V17
for CWM recovery http://forum.xda-developers.com/showthread.php?t=1914394
s13b said:
Hi,
I've downloaded Ripper ROM V17 from the i9305 part of the forum and copied it to my SD card. I have done a clean factory reset and cleared the cache before install.
In Android System Recovery <3e> when trying to install the .zip file, the phone can find and open the file but hangs on verification. The following message is displayed.
E:signature verification failed
A search has turned up one similar problem but nothing the same and nothing that can help me resolve this. Please can someone offer some guidance or ideas as to what I could try?
Many thanks.
If its any help the phone is the i9305 LTE running on the UK EE network
Click to expand...
Click to collapse
You can disable signature verification in the recovery menu somewhere. Can't quite remember where it is
Related
Can someone help me out? I’m what you might call a noob. I’ve root my phone. I have s-on because my radio is 2.42.02.10.29 and I don’t think unrevoked caries that yet. But as far as I understand, that shouldn’t be a big deal since this is signed. I just have to flash manually. So I rename aospCMod-20110201-signed.zip to update.zip and save it into the root of the sd card. I start in recovery. I first Wipe data/factory reset, I then Wipe cache and I finally update. But after trying to update for a couple of seconds I get an error that says signature verification failed. I tried downloading it twice and the same thing happened both times, so I’m pretty sure it’s not a corrupted file.
Someone please help.
-thanks
also, when I enter the Android system recovery I have the error E:Can't open /cache/recovery/command
I'm not sure what that means.
Flash the recovery in the op of the thread, and leave the rom filename alone.
stayclean said:
Flash the recovery in the op of the thread, and leave the rom filename alone.
Click to expand...
Click to collapse
But if it's not called update.zip the phone won't recognize it as something to flash. At least as far as I can tell.
Thanks for your help. I figured it out. I wasn't in the clockwork recovery because it just wasn't loading. When I switched to amon_ra, it worked fine. And I understand now that I don't need it to be named upgrade if you're in one of the fancy (clockwork/amon_ra) recoveries.
hi guys
this is my first post on this kickass site and i hope that someone can help me with this rather strange error :victory:
as the subject of topic says , i get this error whenever i boot my friends sgs into recovery as normal booting goes on loop forever.
this is the error i get in the recovery of stock I9000XXJVU:
----------------------------------------------------------------------------------------
--Copying media files...
E:failed to mount /sdcard (file exists)
E:copy_dbdata_media:can't mount /sdcard
your storage not prepared yet,please use UI menu for format and reboot actions
media files copy failed
# MANUAL MODE #
-- Applying Multi-CSC...
Installing Multi-CSC
Can't access to '/system/csc/TRA/system/'.
Successfully applied multi-CSC
----------------------------------------------------------------------------------------
what happened is this:
my friend had a sgs and i wanted to flash it with cyanogenmod 10 (android 4.1)
the stock firmware was 2.2 iirc.
i just rooted the stock and flashed the 4.1
it went ok but i saw the mounting error back then sometime that i rebooted the device with 4.1 on it but didn't get that error all the time and it would boot just fine.
then the error popuped more and more.
so i decided to flash stock 2.3.6 ,rooting it and finaly go back to 4.1.
after i flashed the device using I9000XXJVU it goes on loop.
recovery and downloading mode works.but the recovery give me that error i said above.
i guess a hardware issue but i don't know for sure
i'm lost here :silly:
help me plz
Thanks in advance
Hi flash this http://db.tt/T8ZpfTPa in pda section in odin
Then see & follow my last post in this thread
http://forum.xda-developers.com/showthread.php?t=1993937
Donovan662 said:
Hi flash this http://db.tt/T8ZpfTPa in pda section in odin
Then see & follow my last post in this thread
http://forum.xda-developers.com/showthread.php?t=1993937
Click to expand...
Click to collapse
thanks for the reply.
i did what you said and its still in loop and same error in recover.
why my internal sdcard isn't mountable?can it be hardware failure?
Same errors?
Donovan662 said:
Same errors?
Click to expand...
Click to collapse
yep same error as before.
after flashing is done and it want to install the package,it get stock and give me that mounting error.
i just want to know if this problem is software or hardware
I also had this problem. Was on stock JVT with semaphore, partitions converted to ext4.
I decided to reboot my phone for no particular reason (was working reat) and when i powered it on kept boot looping without really getting past the samsung gt-i9000 white letters / black background screen.
CWM recovery said it was unable to mount any partition. External SD mounted fine, just nothing from the internel sd. No system, data, whatever. Got me thinking i may had my internal sd malfunctioning.
I just flashed it with odin and my stock branded operator rom (2.3.3) and done nothing more. No repartition. Working great. Was probably some ext4 error.
Before that i had been using cyanogen stable. Started giving FC like mad, so i flashed that stock JVT. On hindsight it may only had been the data partition that had run out of free space but i had no way of knowing when it happened and needed my phone running.
Reflashing got mine running again. Maybe try with Heimdall if odin's not working for you? Be sure to get a complete rom, with bootloaders and such. I'd suggest your operator's stock one. That way you can also send it back to samsung if it still doesn't work.
Click to expand...
Click to collapse
Found this post somewhere in the xda forum, it helped many people having the same problem as yours, hope it helps you !!!!
http://forum.xda-developers.com/showthread.php?t=1841250
See problem 11 exact same problem described
thanks for the help guys
i tried everything that came to my mine and used this topic for my errors but still get errors
problem 11 and 12 are the ones i get flashing different roms
even tried a Rescue kit from here but no go...
why this is happening to me?
the failed to mount as i have come to understand is internal SD card failure you will have to give external SD card a try
Check this thread
http://forum.xda-developers.com/showthread.php?t=2059098&page=2
file moved or deleted
hi friend, file link not working file moved or deleted........
Hello, everyone. This is my first post so excuse my newbliness, if any is noticed...
I've been trying to flash my Mini for quite a while and all I got was a series of epic fails. The ROM that I was trying to flash is the Unofficial CyanogenMod 10, by rohan007; to be more specific, Unofficial CM10_15-12-12, which is the latest update, I think. I was using Cyanogenmod Recovery Image 5.0.2.6-tass which worked quite fine, giving me the advanced options and everything, but each time I would try to install zip from sd, I would get the following error:
~some incomplete log text above, not sure if it matters~
/E:Error in /sdcard/customrom/CM-10_15-12-12.zip
(Status 7)
Installation aborted.
Of course, I followed the exact instructions on how to flash a custom ROM; Clear cache partition, Wipe Data/Reset, Clear Dalvik Cache, etc...
My phone is rooted, by the way. I used the universal_gb_root_v25.zip to root my phone, since it was the only method that worked.
Then, after further investigation, I found out that the image version 5.0.2.6 sometimes fails to intall a custom ROM. So, I found the ClockWorkMod Touch Recovery Lilg Version for Galaxy Mini, CWM TOUCH 5.2.0.8 version. And when I flashed it, I just got "Install from sdcard completed" log message. Since I didn't got any advanced options, I tried to flash the ROM by selecting the option to apply update from sdcard and yet again, I got the following error:
~again, some incomplete log text above, not sure if it matters~
E:Error in /tmp/sideload/package.zip
(Status 7)
Installation aborted.
Then, when I rebooted my system, my phone got stuck on the Samsung GALAXY mini GT-S5570I text and now, every time when I press the power button, it keeps doing the same! I'm seriously getting frustrated here... Anyways, I can only go to the Android system recovery, and the Cyanogenmod system recovery and that is it. Also, I can still manipulate my data from the sd card. (Move and remove files from it, I mean).
One more thing about the Android system recovery. Now I get the log text saying:
-- Appling Multi-CSC --
E:failed to mount /system (Invalid argument)
E:failed to mount /system (Invalid argument)
And obviously, I did something(s) wrong in the whole process, so I beg you to help me resolve this issue. Thank you.
If you need any additional data about the whole bundle of problems, I will be more than glad to post them in my next reply.
see if odin detects your phone, and reflash cwm.
yackovsky said:
see if odin detects your phone, and reflash cwm.
Click to expand...
Click to collapse
ODIN MODE works, reflashing only works with image version 5.0.2.6...
As far as I know ...
we can't flash CWM in GT-S5570i
we can use in temporary only ....
this mean we can use CWM 5.0.2.6 in CWM mode and after reboot the phone goes into original CWM mode.
What I would u to do is ...
If u can go into CWM recovery mode then wipe data / Factory reset
if this doesn't help ...
Go into download mode and flash with original firmware using ODIN ...
shwe said:
As far as I know ...
we can't flash CWM in GT-S5570i
we can use in temporary only ....
this mean we can use CWM 5.0.2.6 in CWM mode and after reboot the phone goes into original CWM mode.
What I would u to do is ...
If u can go into CWM recovery mode then wipe data / Factory reset
if this doesn't help ...
Go into download mode and flash with original firmware using ODIN ...
Click to expand...
Click to collapse
For the CWM, I know. You have to flash it every time on reboot on the android system recovery to get it working.
I tried with factory reset several times and that did nothing. Download mode, also nothing.
So the best solution for me would be to find the stock firmware on the internet and flash that. I'll tell you how that went...
Also, when I try to format system, I get an error: "Error mounting /system! Skipping format... Done"
So for the future, is there any other way, besides CWM, to do a full, complete wipe of the Android OS?
Don't flash gts5570 roms on gts5570i for gawds sake, unless you want to brick your phone...
yackovsky said:
Don't flash gts5570 roms on gts5570i for gawds sake, unless you want to brick your phone...
Click to expand...
Click to collapse
Eh... It's too late for that now... Darn it. Any good methods on how to unbrick it? And, can I take it to the service shop to let them fix it?
Symeonus said:
Eh... It's too late for that now... Darn it. Any good methods on how to unbrick it? And, can I take it to the service shop to let them fix it?
Click to expand...
Click to collapse
if your phone gets detected by odin, just flash any official firmware from samfirmware.com and it's done. if not, hopefully you're still under warranty, then only samsung service center can help you. play dumb, don't mention rooting, flashing, custom roms and such...
yackovsky said:
if your phone gets detected by odin, just flash any official firmware from samfirmware.com and it's done. if not, hopefully you're still under warranty, then only samsung service center can help you. play dumb, don't mention rooting, flashing, custom roms and such...
Click to expand...
Click to collapse
YAY! I UNBRICKED MY PHONE! All is working just fine. Now then, if anything gets seriously wrong, I know what to do. Thank you, yackovsky, for your help.
It seems that all of those errors were caused by me trying to flash GTS5570 ROM on GTS5570I.
Hello there,
Where to start. Ok, I'm not a techy person (so pls dont reply with abreaviations) but I'm half capable, so I decided to upgrade my galaxy s to the x-bean rom.
I flashed my phone using odin to the standard XXJW4 upgrade, rooted it, and transfered the x-bean 3.0 zip and the fix file to the sdcard. Wiped date/factory reset as needed, then when I went to install zip from sdcard the following error message occurs:
E:Error in /sdcard/x-bean 3.0.zip
(status 0)
installation aborted
I'm now using semaphore cwm recovery v6.0.1.3 which i got from a fix I tried.
I've hunted through youtube vids, the recovery section, and the threads for hours!! I've downloaded and tried flashing every file his man and his dog have posted up as fix but nothing is working, all I get is boot loop and this error.
Every time I try upload anything from odin the download stops shortly after it starts and disconnects from the phone. As i can still access recovery and download option tho, does anyone else have a suggedtion which its having a problem accessing the sdcard?
Any help would be greatly appreciated, as phone is useless right now
managed to find a file that resolved it all, just incase anyone else has same problem in future
http://forum.xda-developers.com/showthread.php?t=984140
So I posted a help thing about EFS a while back and didnt get to much help with that but i managed to figure things out. Now however
ive got myself into another predicament i cant seem to get out of.
So, from the start, i have a galaxy s3 (GT i-9305T) it was rooted, i still had the stock rom, but was running the beoffla kernal.
The idea was to download and install "JustArchi I9300XXUGML2 stock, deodexed and all the rest" then start finding
some nice themes. Ive got philz_touch_6.07.9-i9305.tar installed for my recovery.
This is where the trouble starts...
So first off i wipe the cache and the davik cache, go to install the rom then i get this: (ill go from installing update)
assert failed: write_raw_image (" /tmp/boot.img" , " /dev/block/mmcblk0p5" )
E: Error in /storage/sdcard1/Just archi........zip
(Status 7)
Installation aborted
Now i looked up a whole heap of pages to see if i could sort it out myself and i tried a few different things,
none of which have prevailed. First i tried to reflash an insecure boot image then try again, nup. I tried to
flash back to stock recovery and re format (No errors) then back to custom. Mounted /data and /system
and re formatted which worked with no error, still same error when flashing rom though. Also tried flashing
with different custom recovery, no luck there either.
There were a few other things i tried but i cant really remember what i did because
this has been a problem for a while now. Some of the pages i looked over for
information were:
http://www.droidforums.net/forum/android-hacks-help/26658-assert-failed-write_raw_image-tmp-boot-img.html
http://forum.xda-developers.com/showthread.php?t=1045887
And this is the one im on at the moment, im currently downloading a stock rom from sammobile to try flash.
http://forum.xda-developers.com/galaxy-s3/help-i9305/i9305t-10-2-upgrade-boot-stops-unable-t2406422
"UPDATE"
Finished downloading the stock rom, tried to install with philz recovery and got this:
Installing: /storage/sdcard1/I9305TDVBME2_I9305TTELBME1_TEL (STOCK).zip
Finding update package...
Opening update package....
Installing update...
Installation aborted.
And thats it, no kind of specific error codes or anything.
Thanks in advance to anyone who can help me out,
really stuck on this one.
IIEsoticoII said:
So I posted a help thing about EFS a while back and didnt get to much help with that but i managed to figure things out. Now however
ive got myself into another predicament i cant seem to get out of.
So, from the start, i have a galaxy s3 (GT i-9305T) it was rooted, i still had the stock rom, but was running the beoffla kernal.
The idea was to download and install "JustArchi I9300XXUGML2 stock, deodexed and all the rest" then start finding
some nice themes. Ive got philz_touch_6.07.9-i9305.tar installed for my recovery.
This is where the trouble starts...
So first off i wipe the cache and the davik cache, go to install the rom then i get this: (ill go from installing update)
assert failed: write_raw_image (" /tmp/boot.img" , " /dev/block/mmcblk0p5" )
E: Error in /storage/sdcard1/Just archi........zip
(Status 7)
Installation aborted
Now i looked up a whole heap of pages to see if i could sort it out myself and i tried a few different things,
none of which have prevailed. First i tried to reflash an insecure boot image then try again, nup. I tried to
flash back to stock recovery and re format (No errors) then back to custom. Mounted /data and /system
and re formatted which worked with no error, still same error when flashing rom though. Also tried flashing
with different custom recovery, no luck there either.
There were a few other things i tried but i cant really remember what i did because
this has been a problem for a while now. Some of the pages i looked over for
information were:
http://www.droidforums.net/forum/android-hacks-help/26658-assert-failed-write_raw_image-tmp-boot-img.html
http://forum.xda-developers.com/showthread.php?t=1045887
And this is the one im on at the moment, im currently downloading a stock rom from sammobile to try flash.
http://forum.xda-developers.com/galaxy-s3/help-i9305/i9305t-10-2-upgrade-boot-stops-unable-t2406422
"UPDATE"
Finished downloading the stock rom, tried to install with philz recovery and got this:
Installing: /storage/sdcard1/I9305TDVBME2_I9305TTELBME1_TEL (STOCK).zip
Finding update package...
Opening update package....
Installing update...
Installation aborted.
And thats it, no kind of specific error codes or anything.
Thanks in advance to anyone who can help me out,
really stuck on this one.
Click to expand...
Click to collapse
Can anybody at all shed some light on my situation,
or at least a place for me to start learning myself...
Hi.
If you downloaded the stock ROM from sammy mobile are these not meant to be installed via Odin?
There are a few post if you search for some of the pre rooted stock ROMs that you can flash with odin.
I would start from there.
Sent from my GT-I9305 using xda app-developers app
johnnyblaze1977 said:
Hi.
If you downloaded the stock ROM from sammy mobile are these not meant to be installed via Odin?
There are a few post if you search for some of the pre rooted stock ROMs that you can flash with odin.
I would start from there.
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
The roms i downloaded from samsmobile were in .zip files, which im pretty
sure has to be flashed with one of the custom recoveries.
Thanks though
at first seems you tried to flash rom designed for i9300
then, you downloaded an ODIN image and you have to flash it by ODIN, no way you'd flash it over any recovery
to be more specific:
unzip the file I9305TDVBME2_I9305TTELBME1_TEL (STOCK).zip you downloaded, you should get a huge file with extension of .md5 or .tar
read in the forums how to use ODIN to flash firmware
adamuadamu said:
at first seems you tried to flash rom designed for i9300
then, you downloaded an ODIN image and you have to flash it by ODIN, no way you'd flash it over any recovery
to be more specific:
unzip the file I9305TDVBME2_I9305TTELBME1_TEL (STOCK).zip you downloaded, you should get a huge file with extension of .md5 or .tar
read in the forums how to use ODIN to flash firmware
Click to expand...
Click to collapse
Yes ive just done this now and flashed the stock rom with odin
and i think everything has gone well (im not sure as my screen is
water damaged but i did here boot audio only once) so im
letting my phone sit in a bag of rice in pieces for the night
and am going to check things out tommorrow.