Related
Hi,
I Just noticed That when I plug it into my computer the nook charger has an orange/Yellow LED color, but when I plug it into another computer it has a green color - without any relation to how much battery he has.
At first I thought that orange means charging and green means full But apparently that's not true.
Thanks.
P.S
-- I wouldn't have even bothered asking this if it weren't for this rule:
New members (those with fewer than 10 posts) are not permitted to post to development-related forums.
Click to expand...
Click to collapse
EDIT:
Figured out the problem, the other computer slow usb ports were just not fast enough to chrage it, so the nook charger lighted green
Today, for the first time, I noticed my Nook Color USB power cable had an illuminated red colored "n". And that was while the cable was unplugged from the Nook Color itself. (But, obviously, while plugged into the wall charger.)
I thought to unplug the charger from the AC wall power. It takes several seconds for the LED to stop glowing. I waited about 15 seconds after the light was not visible before I plugged the charger back into the AC socket. The cable glowed red again.
Upon plugging the cable into the Nook Color, the cable shows orange again. (As I'd expect, since it's been a couple of days since I last charged my Nook.) The battery icon on the top status bar is "filling", so I think it's actually charging.
I'm used to seeing a green "n" when the battery is full. And orange/amber/yellow when charging. Until today I have not seen a red "n" at all.
[Later, the same day... .]
I -do- find the battery is fully charging. I just have this funny feeling that I ought not leave this thing alone in the house, or take a nap, or whatever, charging. Somehow I think I'll end up on the nightly news... another "victim" of Lithium-Ion gone horribly wrong. ;-) I'll probably try, like some others I've now found via Google, to get B&N to replace the cord or charger.
Wonder if this has something to do with the poor quality of the charger? There is a thread about the chargers breaking easily and the plug bending and eventually breaking.
Just a thought...
Sent from my Nook Color using taptalk
I love both my Nooks (they serve different purposes) but the chargers/cables are very problematic. I had a perfectly working one with my first purchase but an accident destroyed the usb connector and B&N sent me a replacement. It worked for a couple of days and then died a slow death. I ordered a second Nook and got its cable confused with the third cable sent to replace the second defective one. Both worked fine, though, for a couple of days and then suddenly the N on one turned red while plugged in to the Nook or even connected to the computer. Tried it on two other Nooks and the same thing happened. So, I'll be calling in for my fourth replacement cable. I am very glad that I paid for the warranty; it has more than paid for itself with the replacement chargers/cables that B&N has sent to me.
On a side note, when I was waiting for the replacement cable and had no other Nook charging cable available, I used my Blackberry microusb charger to trickle charge the Nook. It literally took all night but at least it was up and running the next morning. It doesn't charge fast enough to use while running apps, as the battery discharges faster than the BB charger can charge the battery.
Again, I love my Nook, even with the charger/cable issues!
I'm running Froyo off the SD. Every since I've done that, I noticed that power cord never turns green when charging is finished at 100%. Has anyone else run into this problem as well?
is it just my unit or anyone else have this issue? the battery indicator (lock screen and notification bar) shows 99% and just wont go up anymore.
UPDATE 2: Trick - when the phone stop at 99% while charging after a while, unplug the cable and immediately plug the cable back in. The battery indicator now should show "Charged".
UPDATE 1: Seem to be a safety mechanism to protect the battery from overcharged.
Also notice the following issues:
2) battery indicator may show as still charging when cable is already unplugged (only happened 2 times so far)
3) screen on by itself randomly while charging (not always but do happen some times)
4) battery discharging mechanism (to protect from over charge) may go haywire! It may go down from full/ 99% to 90% or less while still charging (may be related to (1) ).
Check your cable while charging. Also check to see if its charging as AC not USB. When it switches to USB, then screen will turn on.
Sent from my Nexus 4
Can't speak for the other 2 issues, but only charging to 99% isn't really a bug. This used to occur on the Galaxy Nexus. More reading here
Battery Charges Only to 99%
You can just ignore it, as it's apparently a way to safeguard the battery. Not sure the exact percentage point at which your battery stats reset, but it will have already occurred at 99%, for sure.
noodles2224 said:
Check your cable while charging. Also check to see if its charging as AC not USB. When it switches to USB, then screen will turn on.
Sent from my Nexus 4
Click to expand...
Click to collapse
I was charging with AC, and I used a cable which is for charging only (can't transfer data). I tried it again today with the original cable from the Nexus 4 box, and have not noticed the screen turn on by itself again... Suppose it is the cable fault.
As for the stuck charging icon, it happened twice since I got the phone, but have not appeared again. Can't pinpoint the issue.
crachel said:
Can't speak for the other 2 issues, but only charging to 99% isn't really a bug. This used to occur on the Galaxy Nexus. More reading here
Battery Charges Only to 99%
You can just ignore it, as it's apparently a way to safeguard the battery. Not sure the exact percentage point at which your battery stats reset, but it will have already occurred at 99%, for sure.
Click to expand...
Click to collapse
Ah... this is my first Nexus device. Surprised to find that it is actually a safeguard feature :silly: well as long as it is not faulty I guess I just have to get used to it. Thanks for sharing.
It has to be the dumb usb adaptor that comes with the phone. Mines charges perfectly fine to 100% using an LG AC wall charger I bought.. And even if I restart the phone it stays as charged at 100, USB would be at 99% when I rebooted..
Sent from my Nexus 4
yea my screen turns on randomly sometimes.
also, try this , when u plug in your charger to the wall but dont plug it into the phone , listen to it itll sound like its gonna explode.
I cannot get my sisters TP to boot. I guess she let it die completely, so now when I plug it in, all I get is the home button to blink back and forth. If I try to turn it on, I get the red battery with a lighting bolt icon, then a white plug icon, and when I plug it in from there I get the "To reliably charge" message. I don't have the original ac adapter or cable because she lost it. I have already reflashed the A6 firmware. Also, if I leave it plugged it with the home button flashing, after about 20 minutes or so, the flashing stops for a few seconds, then starts for a few seconds, then stops again and so on and so forth. Is there anything else I should try? Or is this thing dead?
See if you can get an OEM cable or a Touchstone.
pr621 said:
I cannot get my sisters TP to boot. I guess she let it die completely, so now when I plug it in, all I get is the home button to blink back and forth. If I try to turn it on, I get the red battery with a lighting bolt icon, then a white plug icon, and when I plug it in from there I get the "To reliably charge" message. I don't have the original ac adapter or cable because she lost it. I have already reflashed the A6 firmware. Also, if I leave it plugged it with the home button flashing, after about 20 minutes or so, the flashing stops for a few seconds, then starts for a few seconds, then stops again and so on and so forth. Is there anything else I should try? Or is this thing dead?
Click to expand...
Click to collapse
Leave it charging for a long time, 24 hrs +, it should charge.
Good luck.
original charger
pr621 said:
I cannot get my sisters TP to boot. I guess she let it die completely, so now when I plug it in, all I get is the home button to blink back and forth. If I try to turn it on, I get the red battery with a lighting bolt icon, then a white plug icon, and when I plug it in from there I get the "To reliably charge" message. I don't have the original ac adapter or cable because she lost it. I have already reflashed the A6 firmware. Also, if I leave it plugged it with the home button flashing, after about 20 minutes or so, the flashing stops for a few seconds, then starts for a few seconds, then stops again and so on and so forth. Is there anything else I should try? Or is this thing dead?
Click to expand...
Click to collapse
You need to find an original charger or maybe a compare able 2amp Carter will work. A standard phone charger or USB port on your computer is not powerful enough to charge it.
Check amazon it shouldn't cost more than $10
I have another tablet charging block that is 5.0v and 2 amps, but when I use that all it does is make the home button flash then stop then flash again. I left it charge on my computer overnight to try and get it to trickle charge. When I woke up the home button wasn't flashing and when I try to turn it on, the red battery comes up for a second then the white plug icon. I guess I'll see about getting an OEM cable, hopefully that works.
UPDATE: I got it into "recovery" mode? It was plugged into my PC so I held power and vol up until my pc recognized it. But it's showing up as palm in the device manager, and no drivers seem to work for it.
UPDATE 2: My sister found her OEM charger and now it seems to be actually charging. Thanks for the help, I'll let you know if this doesn't work.
Yep, usually issues like that are because of not using the OEM Charger.
pr621 said:
I cannot get my sisters TP to boot. I guess she let it die completely, so now when I plug it in, all I get is the home button to blink back and forth. If I try to turn it on, I get the red battery with a lighting bolt icon, then a white plug icon, and when I plug it in from there I get the "To reliably charge" message. I don't have the original ac adapter or cable because she lost it. I have already reflashed the A6 firmware. Also, if I leave it plugged it with the home button flashing, after about 20 minutes or so, the flashing stops for a few seconds, then starts for a few seconds, then stops again and so on and so forth. Is there anything else I should try? Or is this thing dead?
Click to expand...
Click to collapse
Only hope is original charger or Touchstone
Sent from my cm_tenderloin using Tapatalk 2
Battery dead, bricking issue
I have had several charging issues with my Touchpad. I am using ClassicNerd Butta OS. IF I am using the Android OS (Butta) and I turn off the Touchpad and then plug it in to charge it will restart the Butta OS. When this happens the Touchpad discharges instead of charging. So, when I come back later the Touchpad is dead and it takes a lot of messing around to get it going again. To prevent this I always turn off the Touchpad when I am using the Butta OS but I don't immediately attach the charging cable. Instead, I wait a bit. Then when I plug in the charging cable I immediately switch to the WebOS operating system. The device seems to charge well using WebOS. When it is done charging I unplug the cable and turn the device off. Next time I restart the Touchpad I let it boot to Butta. Then when it discharges to 80% or so I start the process again as stated. Sticking with these procedures has prevented the no-charge / no-boot issue from reoccurring. I also no longer charge the Touchpad at night. Instead, I charge it in the morning or during the day and only leave it on the charger for an hour or two until it is fully charged. It is my understanding that technique should result in longer battery life and better (longer) charge in the battery.
When my Touchpad battery has gone completely dead it is a real pain to get it to charge up the battery again. When the batter is totally dead the device will not boot into any OS or allow me to even get to the boot loader program. Takes a lot of messing around to get it to start charging again. Though I have been able to, eventually, get it to boot into WebOS and start to charge. But this was not an easy process by any means.
Also, I would agree that you really need to get a stock charger with the cable for your Touchpad. Using a different charger could damage the battery in your Touchpad and/or cause the battery to charge too slowly.
Good luck!
pr621 said:
I cannot get my sisters TP to boot. I guess she let it die completely, so now when I plug it in, all I get is the home button to blink back and forth. If I try to turn it on, I get the red battery with a lighting bolt icon, then a white plug icon, and when I plug it in from there I get the "To reliably charge" message. I don't have the original ac adapter or cable because she lost it. I have already reflashed the A6 firmware. Also, if I leave it plugged it with the home button flashing, after about 20 minutes or so, the flashing stops for a few seconds, then starts for a few seconds, then stops again and so on and so forth. Is there anything else I should try? Or is this thing dead?
Click to expand...
Click to collapse
My Hp TouchPad tablet came today and I was told when bidding that it was doing exactly the same thing as mentioned here. I have the OEM charger and cable.. I'll let you know when I can get it straightened out and I hope it is a good one.. Thanks for the info..
While on the OEM charger it booted and I selected webos for the tptb to reflash A6, but soon after it was off charger it went back to the battery icon. battery life low I guess? I selected shutdown. Let it charge over night and see what happens.
Many thanks to many members who are so helpful...
Hi,
I seem to have a peculiar problem with my brother's Nook HD+. When I plug it into the wall charger, the device shows a green light, which turns orange and the Nook powers on to show the Nook logo, but all of a sudden it switches off and the light disappears too.
I have tried holding down the power button while the device is plugged in, holding the n and power button down, using another charger, but nothing seems to work.
How can I troubleshoot this?
Any help would be much appreciated.
Sibot
Let it in charge for 1 hour. (orange light) then remove it. Wait like 10 minutes and try to turn it on. Press the power button for 10 seconds. Repeatedly
I'd suggest leave it plugged in and charged with the BN wall-charger for 4-6 hours.
extrem0 said:
Let it in charge for 1 hour. (orange light) then remove it. Wait like 10 minutes and try to turn it on. Press the power button for 10 seconds. Repeatedly
Click to expand...
Click to collapse
The device is not charging, the orange light does not glow.
Here is what happens after plugging it into the charger - the light turns green for 2 seconds, then orange, the screen comes alive with the nook logo and then all of a sudden, the screen wipes out blank and the charging light also switches off.
I've tried to put it on charge the whole night, tried to turn on the device, hard reset - nothing worked.
Had a very similar issue with mine when I first got it. Turned out it was my USB cable, I called Barnes and Noble and they sent me a free replacement.
Sent from my BN NookHD+ using Tapatalk 4
boomboxcity said:
Had a very similar issue with mine when I first got it. Turned out it was my USB cable, I called Barnes and Noble and they sent me a free replacement.
Sent from my BN NookHD+ using Tapatalk 4
Click to expand...
Click to collapse
I've tried using two different USB cables. The other one is from my other Nook HD+, both the cables seem to be working fine on the other Nook.
I have the exact same issue with my nook right now. It has cm 10.1 installed. But my screen isn't even flashing on at all. It just charges green for 2 seconds, charges orange for 2 seconds, then goes black. Won't turn on. I've had it charges for like 2 days with no luck. Have you figured out what was wrong with your nook yet? I'm going to get a new cord this weekend I guess. Can't think of anything else to try.
Sent from my SCH-I535 using xda app-developers app
I had the same issue of not powering up. Plug it in get the green ,then yellow, then nothing. tried everything. Well almost everything. My last effort got it going. plugged it into a PC at that point it went green , then yellow, but this time stayed on yellow after about 40 minutes it booted.. I was elated.Hope this helps:laugh:
ifearnogod said:
I had the same issue of not powering up. Plug it in get the green ,then yellow, then nothing. tried everything. Well almost everything. My last effort got it going. plugged it into a PC at that point it went green , then yellow, but this time stayed on yellow after about 40 minutes it booted.. I was elated.Hope this helps:laugh:
Click to expand...
Click to collapse
Thanks! Went to a B&N today and got a new cord. Plugged my nook into the charger at their display booth and it showed the charging screen and the LED stayed orange. I was stoked, so I assumed the cord was broken and I bought a new one. Tried it at home, and same #%^#ing problem: green for 2 seconds, orange for 2 seconds, and then off. No screen boot up or battery charging display. Last resort, plugged it into my computer, and it is keeping the orange LED on (yay), but still hasn't booted. It's been a couple of hours, so hopefully it boots here soon. I'm gonna keep it charging with my computer overnight and see if that fixes the problem. Then (if it ever boots), I'm going to put a new OS on the thing so hopefully I don't have to fuss around with the issue anymore. Thanks Ifearnogod. I also fearnogod.
NOOK HD Plus no charge/or power on
mathedrivein said:
Thanks! Went to a B&N today and got a new cord. Plugged my nook into the charger at their display booth and it showed the charging screen and the LED stayed orange. I was stoked, so I assumed the cord was broken and I bought a new one. Tried it at home, and same #%^#ing problem: green for 2 seconds, orange for 2 seconds, and then off. No screen boot up or battery charging display. Last resort, plugged it into my computer, and it is keeping the orange LED on (yay), but still hasn't booted. It's been a couple of hours, so hopefully it boots here soon. I'm gonna keep it charging with my computer overnight and see if that fixes the problem. Then (if it ever boots), I'm going to put a new OS on the thing so hopefully I don't have to fuss around with the issue anymore. Thanks Ifearnogod. I also fearnogod.
Click to expand...
Click to collapse
Had the same problem with the Grandson's, pressed and held numerous button combinations no luck so sent it back to argos for a complete swap out replacement. Guess what after a couple of days the replacement unit did the same thing. Now i'm tearing my hair out after looking through various forums with no answer i tried the daughters Galaxy note charger and bingo it worked, it appears that the original charger supplied with the nook HD plus is not powerful enough to do the job from a completely discharged state. I've told him not to allow it to go completely discharged and we haven't had a problem since with the nook supplied charger.
I have the same prob
I have the same problem, but with my Nook HD (not HD+). I used a different adapter at one point because I lost my Nook adapter. This may have caused the problem for me.
I've got a Nook HD that's acting like this, if I plug it into my computer or into the original charger it blinks green orange green orange, but never powers on. I've held the power button until it starts flashing orange only but it never charges it. When it's connected to the PC it keeps popping up a usb device failed to install prompt so I am thinking that this means the cable is working. I bought a replacement battery to put in it. Hoping that fixes the issue.
I did try it with another usb charger and it changed it's behavior slightly. It would flash green orange then show the N logo then shut off. If I left it on this usb charging adapter it still never would charge it up.
That is why I'm suspecting that it's a bad battery.
I'll get another charging cable next if that doesn't work.
doctor_evil said:
I've got a Nook HD that's acting like this, if I plug it into my computer or into the original charger it blinks green orange green orange, but never powers on. I've held the power button until it starts flashing orange only but it never charges it. When it's connected to the PC it keeps popping up a usb device failed to install prompt so I am thinking that this means the cable is working. I bought a replacement battery to put in it. Hoping that fixes the issue.
I did try it with another usb charger and it changed it's behavior slightly. It would flash green orange then show the N logo then shut off. If I left it on this usb charging adapter it still never would charge it up.
That is why I'm suspecting that it's a bad battery.
I'll get another charging cable next if that doesn't work.
Click to expand...
Click to collapse
I would go with testing a new cable / wall plug before anything else - but then for the price I would probably just jump on it then chuck it before spending money on a proprietary cable for an aging device.
sandsofmyst said:
I would go with testing a new cable / wall plug before anything else - but then for the price I would probably just jump on it then chuck it before spending money on a proprietary cable for an aging device.
Click to expand...
Click to collapse
Aging device? I would try to get a new cable/charger under warranty. Stores will do that if you can show the old one defective.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
Aging device? I would try to get a new cable/charger under warranty. Stores will do that if you can show the old one defective.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
Its aging to me. Its been out for a long time now. I would go with something newer [then spend money on it] - but that's subjective - so I'm not getting into any debate here.
So they do that with just the cable - that's cool stuff.
lol.
yeah the battery didn't fix the issue. It's still not charging, if I connect the charging cable and adapter while it is turned off it turns it on, flashes green orange a couple of times then goes solid green. It boots up but I'm running on the remaining charge in the replacement battery I put in. visual inspection of the charging jack on the nook HD doesn't show any issues, visual inspection of the cable also doesn't show any issues. I'm going to take it to the closest barnes and noble and hope that they are willing to give me a new charging cable today. I guess we will see. Hopefully a new charging cord will fix the issue.
doctor_evil said:
yeah the battery didn't fix the issue. It's still not charging, if I connect the charging cable and adapter while it is turned off it turns it on, flashes green orange a couple of times then goes solid green. It boots up but I'm running on the remaining charge in the replacement battery I put in. visual inspection of the charging jack on the nook HD doesn't show any issues, visual inspection of the cable also doesn't show any issues. I'm going to take it to the closest barnes and noble and hope that they are willing to give me a new charging cable today. I guess we will see. Hopefully a new charging cord will fix the issue.
Click to expand...
Click to collapse
Make sure you still have stock on it if taking the device to the store. Alternate ROMs void the warranty. Maybe you can just take your charger and cable along with your serial number if the device is not stock. They can test to see if it charges their devices.
Sent from my BN NookHD+ using XDA Premium HD app
great...
my nook HD have booted on. when i plug it in a DELL's laptop. the light was green -> orange -> and still orange, after few minutes it boot on and install 148update :laugh::good::laugh::good::laugh::good:
The battery not charging and tablet appearing dead other than the led is a common problem with tablets, not just the nook.
In the tablet they use a chip that has a controller integrated to charge lithium ion batteries. The controller has limits that have to fall into a preset range or the controller will not allow charging. If the battery voltage is low enough , the controller will experience a spike in current when the power is connected, that will trigger an excessive current limit in the controller which blocks it from charging the battery. The cycle repeats over and over and it will not charge because it is never on long enough to get the battery voltage higher.
The fix is easy on most tablets including the nook. You have to open up the case , will void warranty, unplug the internal battery and then connect that battery to an external charger for about 20 minutes to get the battery voltage up high enough to stop the over limit from occurring. I have about 6 tablets of various models that wouldn't turn on or charge and all were fixed and working great by doing the above. Actually a way to get tablets cheap if you see some with the same symptoms.
On the nook the wires you need to connect to charge on the battery are any red for + and any black for - . There are I think 3 red and 3 black bunched together on the connector, any one will work. After charging re-attach the battery and it should boot right up. Just be careful about letting the nook get below about 10% charge.
The charger you use can be just about any standard charger that can charge 7 volt lithium cells, the nook has them wired in series , 2 batteries x 3.7 ~ 7.4V.
A good cheap one that takes out having to worry about charger settings is :
TLP-2000-Tenergy-Universal-Charger-3-7V-14-8V
Here's my story:
Rooted, running CM11 no problems. Read some comics, decided to download and try out Dragon Age from the play store. I had ~35% battery remaining (hard to tell exactly, circular battery mod). After the game downloaded from the store, I opened the app and it began to download the larger files the game requires. I sat the Nook down while it was downloading and eventually the screen turned off/timed out. I tapped the power button to see where the download was and it would not turn on.
So, as of now, pushing the buttons in any combination for any amount of time does nothing. Plugging the tablet into the wall gives me a green light only (never orange). Holding the power button (and any button in combo) for ~10 seconds kills the green light. Pressing the button again lights the green light. I've left the tablet on the charger for over eight hours, two different times now, no change.
Plugging the tablet into the PC acts the same as above, however the PC also repeatedly gives USB device connect/disconnect warnings (sounds) for a bit.
WTF, any advice?
My HTC One had a full discharge a couple days ago.When I got home to plug it in, it showed a blinking red LED and the battery charging animation, but didn't charge at all over a full day. I tried rebooting while still plugged in to the wall charger, which took me to the OS. From the OS I could do anything -- text,call, use Chrome, etc -- but the battery symbol had an exclamation point and the LED was still blinking red. As soon as I took it off the charger, it turned off.
I have tried Power + Volume Down, Power + Volume Up + Volume Down, and the bright light methods.
I was able to restore the phone to a previous backup from TWRP while plugged in, but the problem continues.
Any suggestions?
yelmelnobrainer said:
My HTC One had a full discharge a couple days ago.When I got home to plug it in, it showed a blinking red LED and the battery charging animation, but didn't charge at all over a full day. I tried rebooting while still plugged in to the wall charger, which took me to the OS. From the OS I could do anything -- text,call, use Chrome, etc -- but the battery symbol had an exclamation point and the LED was still blinking red. As soon as I took it off the charger, it turned off.
I have tried Power + Volume Down, Power + Volume Up + Volume Down, and the bright light methods.
I was able to restore the phone to a previous backup from TWRP while plugged in, but the problem continues.
Any suggestions?
Click to expand...
Click to collapse
Try connecting the phone to your computer's USB port. If it charges there, then your charger is bad. You can check to see if is charging by going to Settings -> Power on the phone. If you are using the cable from your charger to connect to the computer and it isn't charging then try another cable. It that works, it may just be the cable that is bad and the rest of the charger is OK.
majmoz said:
Try connecting the phone to your computer's USB port. If it charges there, then your charger is bad. You can check to see if is charging by going to Settings -> Power on the phone. If you are using the cable from your charger to connect to the computer and it isn't charging then try another cable. It that works, it may just be the cable that is bad and the rest of the charger is OK.
Click to expand...
Click to collapse
I have tried multiple cables, including the HTC stock cable and charger. When I plugged the phone into my computer, it did not show the blinking red LED and did not power up. The phone was basically unresponsive. I assume this is from lower amperage from the laptop's USB ports, but could be wrong. The laptop was also plugged into its charger at the time.
yelmelnobrainer said:
I have tried multiple cables, including the HTC stock cable and charger. When I plugged the phone into my computer, it did not show the blinking red LED and did not power up. The phone was basically unresponsive. I assume this is from lower amperage from the laptop's USB ports, but could be wrong. The laptop was also plugged into its charger at the time.
Click to expand...
Click to collapse
The battery is severely discharged. Since, it will not charge via the charger or the computer it looks to be a phone hardware issue. You probably need to take it back to your dealer for servicing. Before you do that, give the connection to the laptop one more go except leave it on the for about an hour or two undisturbed. When batteries are severely discharged, it takes a while for it to recharge enough to give any indication of life.
I ended up sending the phone to HTC. I had modified the kernel and OS, but figured it was worth a shot since the phone was dead and it was still under warranty.
They told me it was out of warranty due to liquid damage. I have no idea how it may have been liquid damaged, but oh well. I wasn't going to pay the $200 to replace the motherboard so I asked them to send the phone back to me.
I received the phone last week and plugged it in. I wanted to make sure I could repeat the symptoms and that HTC hadn't further messed up the phone before I took it to a local repair shop. But what happened when I plugged it in? It came to life and began charging as normal. Either a generous HTC tech fixed my phone for free or the phone needed some interior jostling to get circuits back to normal.
Whatever the situation, my phone has been good as new with all the data just as I left it. For a full week, I've had no problems charging.