My HTC One had a full discharge a couple days ago.When I got home to plug it in, it showed a blinking red LED and the battery charging animation, but didn't charge at all over a full day. I tried rebooting while still plugged in to the wall charger, which took me to the OS. From the OS I could do anything -- text,call, use Chrome, etc -- but the battery symbol had an exclamation point and the LED was still blinking red. As soon as I took it off the charger, it turned off.
I have tried Power + Volume Down, Power + Volume Up + Volume Down, and the bright light methods.
I was able to restore the phone to a previous backup from TWRP while plugged in, but the problem continues.
Any suggestions?
yelmelnobrainer said:
My HTC One had a full discharge a couple days ago.When I got home to plug it in, it showed a blinking red LED and the battery charging animation, but didn't charge at all over a full day. I tried rebooting while still plugged in to the wall charger, which took me to the OS. From the OS I could do anything -- text,call, use Chrome, etc -- but the battery symbol had an exclamation point and the LED was still blinking red. As soon as I took it off the charger, it turned off.
I have tried Power + Volume Down, Power + Volume Up + Volume Down, and the bright light methods.
I was able to restore the phone to a previous backup from TWRP while plugged in, but the problem continues.
Any suggestions?
Click to expand...
Click to collapse
Try connecting the phone to your computer's USB port. If it charges there, then your charger is bad. You can check to see if is charging by going to Settings -> Power on the phone. If you are using the cable from your charger to connect to the computer and it isn't charging then try another cable. It that works, it may just be the cable that is bad and the rest of the charger is OK.
majmoz said:
Try connecting the phone to your computer's USB port. If it charges there, then your charger is bad. You can check to see if is charging by going to Settings -> Power on the phone. If you are using the cable from your charger to connect to the computer and it isn't charging then try another cable. It that works, it may just be the cable that is bad and the rest of the charger is OK.
Click to expand...
Click to collapse
I have tried multiple cables, including the HTC stock cable and charger. When I plugged the phone into my computer, it did not show the blinking red LED and did not power up. The phone was basically unresponsive. I assume this is from lower amperage from the laptop's USB ports, but could be wrong. The laptop was also plugged into its charger at the time.
yelmelnobrainer said:
I have tried multiple cables, including the HTC stock cable and charger. When I plugged the phone into my computer, it did not show the blinking red LED and did not power up. The phone was basically unresponsive. I assume this is from lower amperage from the laptop's USB ports, but could be wrong. The laptop was also plugged into its charger at the time.
Click to expand...
Click to collapse
The battery is severely discharged. Since, it will not charge via the charger or the computer it looks to be a phone hardware issue. You probably need to take it back to your dealer for servicing. Before you do that, give the connection to the laptop one more go except leave it on the for about an hour or two undisturbed. When batteries are severely discharged, it takes a while for it to recharge enough to give any indication of life.
I ended up sending the phone to HTC. I had modified the kernel and OS, but figured it was worth a shot since the phone was dead and it was still under warranty.
They told me it was out of warranty due to liquid damage. I have no idea how it may have been liquid damaged, but oh well. I wasn't going to pay the $200 to replace the motherboard so I asked them to send the phone back to me.
I received the phone last week and plugged it in. I wanted to make sure I could repeat the symptoms and that HTC hadn't further messed up the phone before I took it to a local repair shop. But what happened when I plugged it in? It came to life and began charging as normal. Either a generous HTC tech fixed my phone for free or the phone needed some interior jostling to get circuits back to normal.
Whatever the situation, my phone has been good as new with all the data just as I left it. For a full week, I've had no problems charging.
Related
I posted this question before, but no one answered. But this problem drives me crazy!
My Kaiser turned off when the battery was running out.
When I connect wall power to charge it, the orange LED indicates it was charging, but just few seconds later it automatically boot, and the orange LED was off.
The problem is, it can't boot into OS due to low battery(it only shows "Smart Mobility", but can't even enter bootloader mode) And only if it boots into OS successfully, it can be charged.
Anyone met this problem on any other devices before?
How can I stop auto boot when charging?
What can I do?
That must be something specific to the rom on yours... mine does not automatically boot when when power is applied (assuming it is off, not just in sleep mode), and it charges fine when powered off.
dscline said:
That must be something specific to the rom on yours... mine does not automatically boot when when power is applied (assuming it is off, not just in sleep mode), and it charges fine when powered off.
Click to expand...
Click to collapse
Thanks
I use the ROM from this forum
RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship
What is yours?
I'm just using the stock AT&T Tilt rom.
Here's the fix!
Yes, I've had the same problem a few times on my Vario (Wizard). Very annoying.
Here's what to do:
- Take a mini-usb cable (the one you use for sync and charging from a PC) and cut off the mini-USB connector
- Strip the wires
- Take the battery out of your TyTN
- Carefully connect the ground wire (black) with the ground connector (-) on the battery. Fix it with clear tape.
- Now do the same with the (+) (red wire).
- Attach the USB cable to a running PC and let the battery charge for about an hour. After that, put it back in your phone, you'll be able to boot it up and charge it the regular way.
Yes, it costs you a cable, but it solves the problem.
dscline said:
That must be something specific to the rom on yours... mine does not automatically boot when when power is applied (assuming it is off, not just in sleep mode), and it charges fine when powered off.
Click to expand...
Click to collapse
I think you misunderstood. The problem is that the phone only charges when the OS has loaded completely. So if you really run your battery out completely and there is not enough power in your battery to boot up the phone (read: it turns off again before the boot has completed) you won't be able to charge it the regular way. SOMETIMES a heavier charger (2A) does seem to be able to charge the battery even with the OS shut down, but most of the times it won't work anymore... see below for fix.
SteRo said:
I think you misunderstood. The problem is that the phone only charges when the OS has loaded completely.
Click to expand...
Click to collapse
That's not how I read the original post:
When I connect wall power to charge it, the orange LED indicates it was charging, but just few seconds later it automatically boot, and the orange LED was off.
Click to expand...
Click to collapse
Based on this, it sounds like it is starting to charge without the phone booted (orange LED on), but for some reason it then automatically boots up, then crashes because there's not enough power(??)
But if the problem IS that the phone only charges when the OS has loaded, that is also not how my phone operates. In fact, that even goes against the manual, which tells you to plug the phone in (without turning on the phone) and let it charge fully for the initial charge before turning on the phone and allowing it to boot.
Sorry if I misunderstand, but neither way is how my phone operates... it can charge without the OS loaded, and the phone does not automatically boot once power is applied.
Not sure I fully understand what's going on here but, I am wondering if the power on/off button is stuck in (i.e the micro-switch is clicked in and not releasing). I cannot think of any other reason the device would turn on when connecting the charger if the device is powered completely off. ( Except perhaps shorted connections in the Usb port)
Mike
To SteRo:
Thx a lot for the solution, I tried, but still doesn't work.(I charge it more than 2 hours, and still can't boot into OS)
To mikechannon:
yes, it happened. :-( the power on/off button is NOT stucked. And the device is powered off completely.
To All:
Thx for your reply. What I mean is almost what dscline said:
It starts to charge without the phone booted (orange LED on), but for some reason it then automatically boots up(around 15 sec after I plugin power), meanwhile orange LED is off. But it can't load into OS, just re-boot again and again because there's no enough battery. That makes it's impossible to charge, 'coz it's only charged when the OS has loaded completely.
Anyway, I called customer service to ask them replace the battery. I may try to use different ROM and see what will happen. I'll post the result here.
It's also possible that it has nothing to do with the battery or charging at all. I just checked mine, and the charging indicator is lit with the unit off, but it does go out for a bit during the boot processes, then comes back on again. So what you're seeing with the charging light is normal. It may simply be that there's something corrupted, or some other failure with the device, that is causing it to not boot properly, and get stuck in a reboot loop. If so, it will probably do the same thing with a completely charged battery. You may have just been assuming that it was related to a low charge.
That's what I'm worry about,, Coz I can't boot it by SteRo's solution.
okay... they say trouble comes in three's...
Yesterday I flew to Asia, 20-hours with a full charge. No suprises during the trip. Checked email from Narita during the layover, no prob. But after I arrived in Taipei I received the low battery warning. Plugged in my usb-to-usb (notebook to kaiser) cable and "no charge light"!
This morning I plugged it into a ac battery charger and waited for >10 minutes, still no charge light.
Now, at the risk of a battery, I'm attempting to charge the battery removed from the kaiser using the previous mentioned method. In an hour I'll test it.
This afternoon I'll pick up a new battery charger and spare battery.
In 14-months with my trusty TyTN (cht9000) I never once had a problem like this... I'm a little bummed right now...
[update]
okay -- battery is okay and can be charged externally (using the two wire method or an external battery charger). BUT... the device still won't take a charge using either a direct AC adapter or a USB cord. This was also retested after performing a hard-reset. Not a good sign folks.
The charger works (connected to a Trinity), so it's not the problem. They battery works (charged to 45% after 45-minutes connected to an external battery charger). The HTC OS after a clean hard-reset used to work but now doesn't, so it's unlikely it's software related.
I've made no other modifications to the bootloader or SSPL... everything is original stock. Wish I had my TyTN with me right about now...
Sounds like something I had on my previous TyTN:
The power connector was a bit flaky on my charger at home. So when I'd hookup the powerlead it would charge to 10 secs or so and then no longer charge. I had to put some pressure on the connector to have it continue to charge. So I put a ballpen on the powerlead, just under the phone, when charging.
It's a long shot - hope of use. When you've connected the phone to power, and the orange light goes off, try wiggeling the connector a bit - see if that helps.
Hope of use.
Re
OK,
I've got excactly the same problems... I dont want to make you illusions, but you cant solve it and you need to send it back for repair. Your usb connecter on your tytn is broken...
first i will tell my story...
My tytn did excactly the same, shows the led, powers on automatically (normally it don't do that, so it;s not a rom issue) and then powered down in the smart mobility screen. I tried 4 chargers, and 2 battery's. with a full battery it will power on and load windows, but unable to charge. with the empty battery it will power down in the smart mobility screen. soft reset, hard reset, it won't work.
You can check if it's the same problem, by attaching it to your usb on your computer and call up the bootscreen by pressing the camera button and stick your stylus in the soft reset hole. If it comes up with serial instead of usb, then your device usb connector is broken.
BUT, you can charge your battery in a very strange way i figured out. since i am on a buisness trip i need my phone and don't send it back!!!!!
ok, this is what you have to do, plug in the powercable, call the hard reset screen BUT DON'T APPLY!!!! you will notice it will not power down, so just leave it on this screen for a night with the cable connected. you don't see the charging light, but actually it is charging. for me this temporarely solution works fine... but when i'm back in about seven weeks i send it in for repair.
Hope this will help you!
Swiftgs:
Many thanks for your insight -- you are correct, in bootloader mode the Serial shows instead of USB. I just purchased a spare battery (1100mAh, made in Taiwan) and battery charger for US$17. It'll get me through my business trip, but this is disappointing. As I mentioned in my earlier post, I used a TyTN for 14-months (July 2006 to Sept 2007) as my primary phone, recharging it daily via the USB connector and on a desk charger in my office. I can only conclude that if the USB is physically damaged (not evident visually), then it is not as robust as the USB port used in the original TyTN. The strangest part of all is it worked perfectly until the battery level fell below 10%...
FWIW: I purchased the phone through R&D Marketing. Ron Webber quickly responded to my note and gave me a contact at HTC America. I'll follow-up
after I return and report my experience.
Cheers
well, thanks for all of your replies/infomation.
I tried evey possible methods mentioned above, unfortunatelly none of them works :-(
and the most depressed thing is I filnally get a new battery, but it still doesn't work!
So I sent it back to repair, cross figure...
It works
I would like to thanx 2 SteRo for his advice. I am using Qtek 9000 and had the same problem. Battery was empty, and I tried many times to turn on my PPC, but without success. All the time when red light appeared after 10-15 sec display become black and tried to restart from boot again, and it's happened many times. Finally I thought that I just can trow my Qtek, but seeing your recommendation decided to try. I took USB cable cut it and strap the wires. Connecting red on (+) and black on (-) after 1 hour charging I was able to start my PPC, to recharge battery by 100% and it is working now OK. I must check duration of the battery tomorrow, because reason why I discharged battery was automatic turn off of my PPC when it was on around 45-50% battery capacity. Tomorrow I will check how it's working when I recharge battery again.
Dear SteRo you are the king.
My battery died last night and i charged the phone up and now the phone will not turn on anymore. Anyone have any ideas cause i'm completely out of them???
have you tried takin git out an putting in the phone again?
Yup. I dunno what is going on. I was using sony's cable to charge the thing and the power button was lit up red and now i switched to a different cable and the power button doesn't turn red anymore but the indicator lights are flashing like it doesn't have enough power to start. It may just be dead and sony's cable just stopped working and never charged the thing
Nope that isn't it... it just won't power on for some reason. i hope someone has an idea as to what is going on because i don't
I had a similar problem and had to leave it plugged in for at least 10 mins before the LEDs indicated it was charging.
THANK THE LORD THANK THE LORD. I was right. The crap cable sony uses just didn't charge the phone at all. Now that i switched i was able to turn the phone on again.
Try hard reseting the device while it is powered, might do something if its a software issue.
battery stone dead~won't recharge
I have the same problem. I don't believe ti has anything to do with the cable. The first time it suddenly came to life after a day or two fo being dead, but this time so far it is still in a coma. It did briefly awaken when connected to the pc, but it kept blacking out, and now it's completely gone again.
Could it be that it is not set to power off until the battery is completely stone dead, and therefore it won't recharge?
I think you are absolutely right. I don't believe it allows you to charge it until it is turned on. So try and plug it for like 15mins and try and power it on. Let us know if it works
This sounds like what I have seen on more than one device. If you let the battery go completely dead it will not take a charge from a USB cable to a PC or hub, even if it was a powered hub. We had some old HTCs that would only take a charge from a transformer when the battery had been fully depleted. It was like the USB to PC or hub did not give it enough amps or watts to turn it on and start charging.
Tanquen said:
This sounds like what I have seen on more than one device. If you let the battery go completely dead it will not take a charge from a USB cable to a PC or hub, even if it was a powered hub. We had some old HTCs that would only take a charge from a transformer when the battery had been fully depleted. It was like the USB to PC or hub did not give it enough amps or watts to turn it on and start charging.
Click to expand...
Click to collapse
Came accross this also in the Kaiser forums - think it has something to do with the battery being absolutely drained, so much that there isn't enough power to switch the current to the battery again.
Never happened to me, so never quite figured it out. But the Kaiser forum had a lot of discussion (and solutions I think) on this. (Xperia has HTC involvement..or so it's rumoured).
Tanquen said:
This sounds like what I have seen on more than one device. If you let the battery go completely dead it will not take a charge from a USB cable to a PC or hub, even if it was a powered hub. We had some old HTCs that would only take a charge from a transformer when the battery had been fully depleted. It was like the USB to PC or hub did not give it enough amps or watts to turn it on and start charging.
Click to expand...
Click to collapse
yep... I have had that happened to my blackjack 2 a couple times too. everytime I had to connect it to the charger for like 10 15mins before it can turn on again... plugging it to the pc/hub never work.... also happened once to my iphone as well
Hey I just ran into this problem today.
Turns out it was activesync messing with the phone
Ended the mobile device center process in task manager and phone went back to normal.
EDIT: Ok maybe its not back to normal. But it was definitely caused by activesync...
EDIT2: Back to normal now... Had to plug in the wall charger. After a minute the charging lights flashed and i was able to turn it on.
Checking battery status, and its in the red.. I guess the activesync was just a coincidence.
But wow, I left the thing plugged into my computer overnight to charge, and apparently it drained more than it charged?
There is defiantly something extra going on with the Xperia. While other devices I’ve seen fully drained refuse to start charging again from a USB to PC cable and even some power outlet charges. My Xperia is also doing as Nipperos. With an almost full charge I plugged it into the USB to PC cable and the icon went to the little plug and when I clicked on it the status said that it is was charging but when I got ready to leave for the day it had drained down one red bar. It was also very warm. With this, the $800 price tag and the random crashing made worse by the incredibly poor location of the reset button and made even worse by the incredibly poor design of the battery cover. Really, what is the proper way to get the thing off without breaking it? I’m fighting the urge to return it.
Any word on a new firmware?
Nippero said:
Hey I just ran into this problem today.
Turns out it was activesync messing with the phone
Ended the mobile device center process in task manager and phone went back to normal.
EDIT: Ok maybe its not back to normal. But it was definitely caused by activesync...
EDIT2: Back to normal now... Had to plug in the wall charger. After a minute the charging lights flashed and i was able to turn it on.
Checking battery status, and its in the red.. I guess the activesync was just a coincidence.
But wow, I left the thing plugged into my computer overnight to charge, and apparently it drained more than it charged?
Click to expand...
Click to collapse
I've noticed this too... My phone will be on full charge, i connect it to my PC to install a software, then i check one bar's gone... it drains more than it charges...
my x1 did this today. my buddy has a verizon htc phone and let me use hus htc wall charger and it did the trick...
my x1 is a x1i so i dont know if the US. plugs or what dont agree with the phone. but out of 6 cables and chargers only 2 will charge the phone from a dead battery the other 4 would only charge after it was on.
so my best solution for you all is to find yourself a htc wall charger and let it charger for 20 mins before trying to turn it on.
and of course theres htc involvment on the x1. look in the windows folder. all drivers are HTCxxx.dll the comm manager is htc. theres a forum here the htc developers site. this isnt a site for samsungs and other makers. this is a site for htc devices. if it wasnt a htc device it wouldnt be here.
My experience
I had a similar experience while on a trip to Korea. I didn't foresee that a 200mA difference in the current output of a wall socket charger will cause me so much pain.
I had always been able to charge the X1 with my Jabra headset's wall socket charger, hence I brought it on my trip. Not being mindful of the ratings, it can only supply 500mA, which is different from the X1's charger, 700mA. I was using it happily on a bus, happily keeping it alive with a solar USB charger (till it ran out of juice too). A while later, playing with the GPS I noticed my battery power dropped to 20% (2 bar) so I pressed the power button to conserve energy.
Unknowingly, the battery kept draining and the next time I wanted to turn it on I couldn't. The top 2 LEDs gave me 3 red blinks. I thought, "ok, so I just go back to the hotel to charge it with my Jabra charger."
When I tried that, I noticed that the power button gave a constant red LED and the battery did not charge. Taking out the battery and putting it back, I noticed the power LED went off (which indicates it was going to charge) but came back out again. It never charged.
Back home, after using the supplied SE charger, the power LED went off and never came back. I tried to turn on the X1 after 15mins and it powered up, showing the usual charging LED cycles.
Lesson Learnt. Always use original accessories.
Same problem here....
I knew about problem charging totally dead battery with wall plug-in (from previous HTC). Totally dead battery was not possible to charge via USB (from PC). But I have bought xperia via ebay and didn't know the wall charger is not original SE charger... Hope to work with previous HTC charger
Tx for coming to the idea
Just happened to me :S
I had used it all day and Wifi was turned on so obviously battery was almost dead. To save battery I turned off the Xperia.
When I tried to turn it on again it wouldnt and so I connected it to the pc.
That didnt work out so I connected it to the standard charger but that also didnt work. Right now my Xperia X1 is lying unplugged on the table because someone said you should leave it unplugged for a couple of minutes.
Hopefully it will work, I only have had it for 3 days :´(
Also hope this doesnt happen everytime your battery is drained because that would be annoying as hell.
--Edit--
Ok so what I did was I removed the battery and plugged it back in. This worked and I managed to turn it on and right now its charging.
Though when I try to go to sleep mode it turns the display on again after about 3 seconds and does what I am guessing is a low battery beep (Sorry windowsmobile noob here) but then stops instantly, which is pretty stange.
ok anyone know a way to increase the power wattage from your pc to the usb device? (sounds dangerous i know), but there must be someone who has had a similar prob and was able to fix with a bit of tweaking....ill google and come back with any results
okay...i had similar problem today morning..it wudnt start.
so i left it charging for ten minutes...and now it has turned on finally.
i think the battery goes completely dead.
I cannot get my sisters TP to boot. I guess she let it die completely, so now when I plug it in, all I get is the home button to blink back and forth. If I try to turn it on, I get the red battery with a lighting bolt icon, then a white plug icon, and when I plug it in from there I get the "To reliably charge" message. I don't have the original ac adapter or cable because she lost it. I have already reflashed the A6 firmware. Also, if I leave it plugged it with the home button flashing, after about 20 minutes or so, the flashing stops for a few seconds, then starts for a few seconds, then stops again and so on and so forth. Is there anything else I should try? Or is this thing dead?
See if you can get an OEM cable or a Touchstone.
pr621 said:
I cannot get my sisters TP to boot. I guess she let it die completely, so now when I plug it in, all I get is the home button to blink back and forth. If I try to turn it on, I get the red battery with a lighting bolt icon, then a white plug icon, and when I plug it in from there I get the "To reliably charge" message. I don't have the original ac adapter or cable because she lost it. I have already reflashed the A6 firmware. Also, if I leave it plugged it with the home button flashing, after about 20 minutes or so, the flashing stops for a few seconds, then starts for a few seconds, then stops again and so on and so forth. Is there anything else I should try? Or is this thing dead?
Click to expand...
Click to collapse
Leave it charging for a long time, 24 hrs +, it should charge.
Good luck.
original charger
pr621 said:
I cannot get my sisters TP to boot. I guess she let it die completely, so now when I plug it in, all I get is the home button to blink back and forth. If I try to turn it on, I get the red battery with a lighting bolt icon, then a white plug icon, and when I plug it in from there I get the "To reliably charge" message. I don't have the original ac adapter or cable because she lost it. I have already reflashed the A6 firmware. Also, if I leave it plugged it with the home button flashing, after about 20 minutes or so, the flashing stops for a few seconds, then starts for a few seconds, then stops again and so on and so forth. Is there anything else I should try? Or is this thing dead?
Click to expand...
Click to collapse
You need to find an original charger or maybe a compare able 2amp Carter will work. A standard phone charger or USB port on your computer is not powerful enough to charge it.
Check amazon it shouldn't cost more than $10
I have another tablet charging block that is 5.0v and 2 amps, but when I use that all it does is make the home button flash then stop then flash again. I left it charge on my computer overnight to try and get it to trickle charge. When I woke up the home button wasn't flashing and when I try to turn it on, the red battery comes up for a second then the white plug icon. I guess I'll see about getting an OEM cable, hopefully that works.
UPDATE: I got it into "recovery" mode? It was plugged into my PC so I held power and vol up until my pc recognized it. But it's showing up as palm in the device manager, and no drivers seem to work for it.
UPDATE 2: My sister found her OEM charger and now it seems to be actually charging. Thanks for the help, I'll let you know if this doesn't work.
Yep, usually issues like that are because of not using the OEM Charger.
pr621 said:
I cannot get my sisters TP to boot. I guess she let it die completely, so now when I plug it in, all I get is the home button to blink back and forth. If I try to turn it on, I get the red battery with a lighting bolt icon, then a white plug icon, and when I plug it in from there I get the "To reliably charge" message. I don't have the original ac adapter or cable because she lost it. I have already reflashed the A6 firmware. Also, if I leave it plugged it with the home button flashing, after about 20 minutes or so, the flashing stops for a few seconds, then starts for a few seconds, then stops again and so on and so forth. Is there anything else I should try? Or is this thing dead?
Click to expand...
Click to collapse
Only hope is original charger or Touchstone
Sent from my cm_tenderloin using Tapatalk 2
Battery dead, bricking issue
I have had several charging issues with my Touchpad. I am using ClassicNerd Butta OS. IF I am using the Android OS (Butta) and I turn off the Touchpad and then plug it in to charge it will restart the Butta OS. When this happens the Touchpad discharges instead of charging. So, when I come back later the Touchpad is dead and it takes a lot of messing around to get it going again. To prevent this I always turn off the Touchpad when I am using the Butta OS but I don't immediately attach the charging cable. Instead, I wait a bit. Then when I plug in the charging cable I immediately switch to the WebOS operating system. The device seems to charge well using WebOS. When it is done charging I unplug the cable and turn the device off. Next time I restart the Touchpad I let it boot to Butta. Then when it discharges to 80% or so I start the process again as stated. Sticking with these procedures has prevented the no-charge / no-boot issue from reoccurring. I also no longer charge the Touchpad at night. Instead, I charge it in the morning or during the day and only leave it on the charger for an hour or two until it is fully charged. It is my understanding that technique should result in longer battery life and better (longer) charge in the battery.
When my Touchpad battery has gone completely dead it is a real pain to get it to charge up the battery again. When the batter is totally dead the device will not boot into any OS or allow me to even get to the boot loader program. Takes a lot of messing around to get it to start charging again. Though I have been able to, eventually, get it to boot into WebOS and start to charge. But this was not an easy process by any means.
Also, I would agree that you really need to get a stock charger with the cable for your Touchpad. Using a different charger could damage the battery in your Touchpad and/or cause the battery to charge too slowly.
Good luck!
pr621 said:
I cannot get my sisters TP to boot. I guess she let it die completely, so now when I plug it in, all I get is the home button to blink back and forth. If I try to turn it on, I get the red battery with a lighting bolt icon, then a white plug icon, and when I plug it in from there I get the "To reliably charge" message. I don't have the original ac adapter or cable because she lost it. I have already reflashed the A6 firmware. Also, if I leave it plugged it with the home button flashing, after about 20 minutes or so, the flashing stops for a few seconds, then starts for a few seconds, then stops again and so on and so forth. Is there anything else I should try? Or is this thing dead?
Click to expand...
Click to collapse
My Hp TouchPad tablet came today and I was told when bidding that it was doing exactly the same thing as mentioned here. I have the OEM charger and cable.. I'll let you know when I can get it straightened out and I hope it is a good one.. Thanks for the info..
While on the OEM charger it booted and I selected webos for the tptb to reflash A6, but soon after it was off charger it went back to the battery icon. battery life low I guess? I selected shutdown. Let it charge over night and see what happens.
Many thanks to many members who are so helpful...
My battery totally died last night and powered off when it ran out of battery however now I cannot charge the phone at all. It was on charge all night and no charging light comes on. Ive tried with the mains cable, usb cable to pc and in car charger.
Does anyone have any suggestions to get it working again?
Thanks
Did it just randomly die? Is there anything you did beforehand that could influence it, like dropping it (in water)?
I'm not entirely sure what it could be, but if you could provide this info, others mide have an easier time troubleshooting.
dr9722 said:
My battery totally died last night and powered off when it ran out of battery however now I cannot charge the phone at all. It was on charge all night and no charging light comes on. Ive tried with the mains cable, usb cable to pc and in car charger.
Does anyone have any suggestions to get it working again?
Thanks
Click to expand...
Click to collapse
HI
greetings,
connect the phone to charger and press and hold the power button for 30 sec and see if the led is flashing
if not then connect to pc and try to boot into bootloader menu and tell what happens. weather it boots, does it just vibrates or does the led flash
this is a problem on Xperia Devices (at least the ones with a sealed battery my x10 never had this).
This drain brick happens because the hell i know, but is phone bricked, dark, no light , no vibration, nada, its was a real brick.
how i fixed it? sort of i fixed my Xperia T had to provoke charging but the Z1 doesnt have a red blinking light after charging it for a while... but it does have a magnetic charging port!.
now to the instructions. following what i did to try and revive my phone.
1. try to charge the phone for an hour or so.
2. most like it wont charge but if you connect it to the PC, it will sort of react to it, just try unplugging and plugging the phone till it reacts, you may even leave it to charge there just in case (for about 10 mins if you want i leaved it for 3).
3. get a 2 AMP charger, the original one or a known brand charger like anker (i did it with my anker charger and it worked).
4. get or Use a magnetic cable/dock and connect it simultaniously with the usb cable on the PC. (and no the magnetic cable wasnt enough to jump charge the phone).
5. if the stimulation worked, it should be able to show a really dim red led, that means your phone is still alive
6.let it charge it will turn on alone.
7. smile and cry out of joy because your 500-700 dollar phone still works.
if it worked or you have any modifications on this method leave a comment and hit the THANKS button.
btw i turned on my phone and it had 1% that means it never charged until i jump charged it.
Interesting. For normal charging, will plugging the Z1 to the USB and magnetic ports simultaneously speed up charging as well?
Celestial Fury said:
Interesting. For normal charging, will plugging the Z1 to the USB and magnetic ports simultaneously speed up charging as well?
Click to expand...
Click to collapse
no you can't speed up charging. Charging speed is limited to cable quality, AC plug quality and software/hardware restrictions.
the USB on PC and magnetic cable combo for some reason helps to start the phone like you do when you want to recharge an depleted car battery.
It just open the circuit and let the phone charge again.
someone please confirm if this works for more than one person/situation.
Thanks for assistance btw, hopefully it works for all of us.
Nope doesn't work.
I tried it already.
Sorry guys.
Worked for me. Took some time before PCC registered it though.
help me please
Asadroid said:
this is a problem on Xperia Devices (at least the ones with a sealed battery my x10 never had this).
This drain brick happens because the hell i know, but is phone bricked, dark, no light , no vibration, nada, its was a real brick.
how i fixed it? sort of i fixed my Xperia T had to provoke charging but the Z1 doesnt have a red blinking light after charging it for a while... but it does have a magnetic charging port!.
now to the instructions. following what i did to try and revive my phone.
1. try to charge the phone for an hour or so.
2. most like it wont charge but if you connect it to the PC, it will sort of react to it, just try unplugging and plugging the phone till it reacts, you may even leave it to charge there just in case (for about 10 mins if you want i leaved it for 3).
3. get a 2 AMP charger, the original one or a known brand charger like anker (i did it with my anker charger and it worked).
4. get or Use a magnetic cable/dock and connect it simultaniously with the usb cable on the PC. (and no the magnetic cable wasnt enough to jump charge the phone).
5. if the stimulation worked, it should be able to show a really dim red led, that means your phone is still alive
6.let it charge it will turn on alone.
7. smile and cry out of joy because your 500-700 dollar phone still works.
if it worked or you have any modifications on this method leave a comment and hit the THANKS button.
btw i turned on my phone and it had 1% that means it never charged until i jump charged it.
Click to expand...
Click to collapse
Hello my friend I have Xperia Z1 and I fall into the Hard Brick Pc didn't recognized my phone but I put myself in the wall charger after a few hours LED red blinking you can post a picture for this solution because I did not understand exactly and thank you
pheel said:
Nope doesn't work.
I tried it already.
Sorry guys.
Click to expand...
Click to collapse
did the computer detected the phone but for a brief moment like trying to install the drivers?
Kirkymole said:
Worked for me. Took some time before PCC registered it though.
Click to expand...
Click to collapse
@Kirkymole;
can you share what you did exactly and what i can up to the guide?
and im glad that i could help you
momo-infos said:
Hello my friend I have Xperia Z1 and I fall into the Hard Brick Pc didn't recognized my phone but I put myself in the wall charger after a few hours LED red blinking you can post a picture for this solution because I did not understand exactly and thank you
Click to expand...
Click to collapse
as i told you on the PM write up how you bricked it exactly and what steps have you done so i can help you correctly.
i will post pictures of the procedure of how i did it when i get a few hours to edit and upload it.
Tried this trick last night. After 2 hours LED stopped blinking and became stable RED (no flashing). This is the first time in 1 month that LED stopped flashing, I was even able to Hold Power+Volume up button and it vibrated 3 times (nothing like that happened in the past). So it was a significant improvement from where I was 2 days ago. However, LED suddenly turned off and when I connected it to charger again it started to blink again. Buttons do not respond again.
Little info from the past:
I bricked my Z1 when I flashed .290 ROM. Left it on charge for 2 days nothing happened, flashtool would not recognize it and kept saying USB debugging off. Then I decided to open back cover and remove the battery so it could reset. That didnt resolve the issue and i just gave up.
Video instruksion would be very helpfull maybe
Asadroid said:
did the computer detected the phone but for a brief moment like trying to install the drivers?
Click to expand...
Click to collapse
Yes. But the computer simply recognised it as a normal "unknown" usb device with usb debugging disabled.
--
ruinkhan said:
Tried this trick last night. After 2 hours LED stopped blinking and became stable RED (no flashing). This is the first time in 1 month that LED stopped flashing, I was even able to Hold Power+Volume up button and it vibrated 3 times (nothing like that happened in the past). So it was a significant improvement from where I was 2 days ago. However, LED suddenly turned off and when I connected it to charger again it started to blink again. Buttons do not respond again.
Little info from the past:
I bricked my Z1 when I flashed .290 ROM. Left it on charge for 2 days nothing happened, flashtool would not recognize it and kept saying USB debugging off. Then I decided to open back cover and remove the battery so it could reset. That didnt resolve the issue and i just gave up.
Click to expand...
Click to collapse
Exact same thing happened to me. "USB debugging off"
All I did was plug in the magnetic connector, then with the PC turned on and Pc companion running I plugged in the USB, it took about 20 minutes to recognise it but once it did, I unplugged it, left it on charge via the magnetic plug for around 5 hours and although the charging symbol never appeared it booted into recovery the normal way (I did that just to see what would happen) then restarted the phone via Cwm and it worked normally from then on.
Kirkymole said:
although the charging symbol never appeared it booted into recovery the normal way .
Click to expand...
Click to collapse
BY saying "Charging Symbol never appeared", do you mean LED was not red and turned off?
ruinkhan said:
BY saying "Charging Symbol never appeared", do you mean LED was not red and turned off?
Click to expand...
Click to collapse
The symbol that appears on the screen.
I also kind of used this method.
I directly plugged in, in these steps.
1) Plug in magnetic charging dock with 1A charger (Plugged USB into charger)
2) Plug in USB with 2.1A charger (Plugged USB into charger)
Dim-ish red light popped up and the phone began booting.
Plugging into the phone for me wasn't as effective as plugging into the charger as I left it for a while and nothing happened but upon plugging USB into my single dual port charger this method worked to get my phone onto the charging screen, Android L
Had to plug the USB in and out a few times, not too many times, but eventually it booted up to the charging screen.
Be patient is the key I suppose?
For me worked with magnetic and usb 1A charger! Thanks!