Hey guys
I got the minor 1.47 mb uodate for my htc one but i didnt get the actual 4.2.2 update
Sent from my HTC One using xda app-developers app
khedir said:
Hey guys
I got the minor 1.47 mb uodate for my htc one but i didnt get the actual 4.2.2 update
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
you'll get 4.2.2 pretty some .. check for update again ..
Sent from my HTC One using xda app-developers app
Sent from my HTC One using xda app-developers app
rhtzshahriar said:
you'll get 4.2.2 pretty some .. check for update again ..
Click to expand...
Click to collapse
I got the 1.47 like one hour ago
And it said that it well let me update my phone to 4.2.2
But when i check for updates it tells me that my phone is up to date
Sent from my HTC One using xda app-developers app
I`ve got this small update too, and right after I received 4.22 OTA. Keep verifying for updates.
khedir said:
Hey guys
I got the minor 1.47 mb uodate for my htc one but i didnt get the actual 4.2.2 update
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
OTA update is a difference (delta) between previous and next the official software of your phone.
You don't receive big 4.2.2 OTA because your CID/MID and an image of your software isn't suitable for updating.
Return your phone software to stock in compliance to yours MID/CID and you will receive 4.2.2. OTA.
I have returned my phone back to stock using the steps in the forum
I have downloaded the stock rom
I have stock recovery and relocked bootloader
Sent from my HTC One using xda app-developers app
tash2013 said:
OTA update is a difference (delta) between previous and next the official software of your phone.
You don't receive big 4.2.2 OTA because your CID/MID and an image of your software isn't suitable for updating.
Return your phone software to stock in compliance to yours MID/CID and you will receive 4.2.2. OTA.
Click to expand...
Click to collapse
I have returned my phone back to stock using the steps in the forum
I have downloaded the stock rom
I have stock recovery and relocked bootloader
Sent from my HTC One using xda app-developers app
khedir said:
I have returned my phone back to stock using the steps in the forum
I have downloaded the stock rom
I have stock recovery and relocked bootloader
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
And? Did you receive OTA?
In an adjacent topic I read, what you have 2.17.401.1 ROM? It not official version, you never receive OTA with it.
tash2013 said:
And? Did you receive OTA?
In an adjacent topic I read, what you have 2.17.401.1 ROM? It not official version, you never receive OTA with it.
Click to expand...
Click to collapse
well i followed these steps
Method 1 - only for users with .401 devices (for more info click here - RUU variants)
Visit this thread - [ROM] HTC One *STOCK* ROM
Download stock odexed version of most recent firmware and recovery.img
Move recovery.img to c:\mini-sdk location
Boot your device in recovery mode (power off the device and turn it on using power + vol down buttons and select "RECOVERY")
In main menu, select "install zip from sdcard" and "choose zip from sdcard".
Navigate to the location of stock ROM (zip) package and confirm flashing procedure.
After flashing process is complete, reboot the device in bootloader mode.
Connect your device to the PC
Boot your device in fastboot mode (like you did during unlocking bootloader - power off the device and turn it on using power + vol down buttons and select "FASTBOOT")
Open up command prompt ( Start > Run > type cmd and hit enter ). The window that appears is called Command Prompt. <click here to see the image>
Navigate to where you unzipped "mini-sdk" package (type in Command Prompt: cd c:\mini-sdk). Note: make sure the path is not c:\mini-sdk\mini-sdk
In the Command Prompt type following command: fastboot flash recovery recovery.img
You have now stock boot, system and recovery partitions. Time to relock your bootloader.
In the Command Prompt type following command: fastboot oem lock
Click to expand...
Click to collapse
i downloaded the rom and flashed it then i returned to stock recovery
so what can i do now
someone gave me an ruu but it didnt work
can u give me a dowmload link off the 4.1.2 stock rom ?
khedir said:
well i followed these steps
i downloaded the rom and flashed it then i returned to stock recovery
so what can i do now
someone gave me an ruu but it didnt work
can u give me a dowmload link off the 4.1.2 stock rom ?
Click to expand...
Click to collapse
What your MID ?
What your CID ?
tash2013 said:
And? Did you receive OTA?
In an adjacent topic I read, what you have 2.17.401.1 ROM? It not official version, you never receive OTA with it.
Click to expand...
Click to collapse
tash2013 said:
What your MID ?
What your CID ?
Click to expand...
Click to collapse
my cid is htc_j15
how can i know my mid ?
I received the 1.47mb update today. That was about two weeks after receiving 4.2.2
Firmware is still 2.24.701.1
I know not what the update did.
Sent from my HTC One 801e using Tapatalk 2
khedir said:
my cid is htc_j15
how can i know my mid ?
Click to expand...
Click to collapse
Print here (without imei and s/n)
result of "fastboot getvar all"
tash2013 said:
Print here (without imei and s/n)
result of "fastboot getvar all"
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.29.401.17
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0711000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 4082mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
khedir said:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.29.401.17
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0711000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 4082mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
Click to expand...
Click to collapse
m7_u and (if you did not change hboot) last official firmware 1.29.401.17, I don't see proper RUU for you.
Any case you need get S-OFF, to play with RUU
tash2013 said:
Print here (without imei and s/n)
result of "fastboot getvar all"
Click to expand...
Click to collapse
tash2013 said:
m7_u and (if you did not change hboot) last official firmware 1.29.401.17, I don't see proper RUU for you.
Any case you need get S-OFF, to play with RUU
Click to expand...
Click to collapse
so please can u tell me how to do that ?!
khedir said:
so please can u tell me how to do that ?!
Click to expand...
Click to collapse
S-OFF here
http://forum.xda-developers.com/showthread.php?p=43484712#post43484712
And then you have two way.
1) To look for suitable RUU, someone can another will help, I don't see it.
2) VERY DANGEROUS! To change your MID from PN0711000 to PN0710000 and to flash this RUU_M7_UL_JB_50_HTC_Europe_1.28.401.7_Radio_4A.13. 3231.27_10.31.1131.05_release_310878_signed.exe
ADD
Third way
To forget about OTA and just to flash 2.24.401.1
http://forum.xda-developers.com/showthread.php?t=2353083
tash2013 said:
S-OFF here
http://forum.xda-developers.com/showthread.php?p=43484712#post43484712
And then you have two way.
1) To look for suitable RUU, someone can another will help, I don't see it.
2) VERY DANGEROUS! To change your MID from PN0711000 to PN0710000 and to flash this RUU_M7_UL_JB_50_HTC_Europe_1.28.401.7_Radio_4A.13. 3231.27_10.31.1131.05_release_310878_signed.exe
ADD
Third way
To forget about OTA and just to flash 2.24.401.1
http://forum.xda-developers.com/showthread.php?t=2353083
Click to expand...
Click to collapse
so does this rom have lockscreen widgets ?!
Related
I've installed CM7 but when I wanted to recover to my originele sense 3 rom, the phone would not boot. So my question is if I can download the stock rom from my Incredible S?
Method01 said:
I've installed CM7 but when I wanted to recover to my originele sense 3 rom, the phone would not boot. So my question is if I can download the stock rom from my Incredible S?
Click to expand...
Click to collapse
yes you can. however your bootloader will change.so are you s-off by xtc clip or software hack?
here are the roms:
http://forum.xda-developers.com/showthread.php?t=1033922
ajeya said:
yes you can. however your bootloader will change.so are you s-off by xtc clip or software hack?
here are the roms:
http://forum.xda-developers.com/showthread.php?t=1033922
Click to expand...
Click to collapse
Thanks. Which one i have to choose? Bought it in Europe and it is unbranded
I did it like here:
http://forum.xda-developers.com/showthread.php?t=1337105
And for going back to the stock rom, do I need to flash some things again or is it just factory reset + install from zip file?
http://forum.xda-developers.com/showpost.php?p=18079795&postcount=1 so that is the method to get the phone
back like new?
Or is it this topic I have to follow: http://forum.xda-developers.com/showthread.php?t=1359555
Gave it a try.. Wit the RUU method it always gave an error on my desktop and a security and update fail on my phone
So i copied the PG32IMG.zip on my sdcard and bootloader found the file.
Then in the right top corner is see some kind of status bar en when it is full, nothing happens. The phone didn't ask for any update.
What now
nobody who can help plz?
Method01 said:
Gave it a try.. Wit the RUU method it always gave an error on my desktop and a security and update fail on my phone
So i copied the PG32IMG.zip on my sdcard and bootloader found the file.
Then in the right top corner is see some kind of status bar en when it is full, nothing happens. The phone didn't ask for any update.
What now
Click to expand...
Click to collapse
OK, in reading through your posts, it sounds like you currently have HBOOT version 2.00.0000 Unlocked on your phone. That version is not going to let you install an older RUU/PG32IMG.zip file. You will have to flash the Sense 3.0 /3.08.405.3 RUU to get rid of CM7.
tpbklake said:
OK, in reading through your posts, it sounds like you currently have HBOOT version 2.00.0000 Unlocked on your phone. That version is not going to let you install an older RUU/PG32IMG.zip file. You will have to flash the Sense 3.0 /3.08.405.3 RUU to get rid of CM7.
Click to expand...
Click to collapse
That's correct.
I used the P32IMG.zip from:
RUU_VIVO_SENSE30_S_HTC_WWE_3.08.405.3_Radio_20.4802.30.0822U_3822.10.08.28_M_release_227170_signed.exe
That is already the right one, not?
When I use the RUU installer on pc it says I'll update from image version 2.30.405.1 to 3.08.405.3
c:\Android>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.00.0000
(bootloader) version-baseband: 3822.10.08.28_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.08.405.3
(bootloader) serialno: HT12TTD09339
(bootloader) imei: 355301040658406
(bootloader) product: vivo
(bootloader) platform: HBOOT-7630
(bootloader) modelid: PG3213000
(bootloader) cidnum: HTC__E11
(bootloader) battery-status: good
(bootloader) battery-voltage: 3768mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-af9874be
(bootloader) hbootpreupdate: 12
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
Method01 said:
That's correct.
I used the P32IMG.zip from:
RUU_VIVO_SENSE30_S_HTC_WWE_3.08.405.3_Radio_20.4802.30.0822U_3822.10.08.28_M_release_227170_signed.exe
That is already the right one, not?
When I use the RUU installer on pc it says I'll update from image version 2.30.405.1 to 3.08.405.3
Click to expand...
Click to collapse
Yes that is the right one. Everything looks good.
tpbklake said:
Yes that is the right one. Everything looks good.
Click to expand...
Click to collapse
Strange thing is that I always tried with that one and it didn't update..
Method01 said:
Strange thing is that I always tried with that one and it didn't update..
Click to expand...
Click to collapse
OK, since you have the HBOOT in an UNLOCKED state, the PG32IMG.zip/RUU will not update. You need to go into FASTBOOT mode and relock the HBOOT and then you can flash the PG32IMG.zip file.
Here's a link:
http://rootzwiki.com/topic/9322-how-to-relocked-hboot-htc-root-method/
tpbklake said:
OK, since you have the HBOOT in an UNLOCKED state, the PG32IMG.zip/RUU will not update. You need to go into FASTBOOT mode and relock the HBOOT and then you can flash the PG32IMG.zip file.
Here's a link:
http://rootzwiki.com/topic/9322-how-to-relocked-hboot-htc-root-method/
Click to expand...
Click to collapse
it worked!
thank you very much !
Can someone please tell me how to get there safely?(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.26.502.12
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT35ZW900606
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3901mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.096s
I don't see any stickies. i'm sure I can search, but i'm scared to death of following the wrong one and bricking this phone.
Bump?
Sent from my HTC One using xda app-developers app
spark plugs. said:
Bump?
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
Here are all available RUU`s, OTA`s and CWM/TWRP firmwares http://forum.xda-developers.com/showthread.php?t=2207874. Hope you find something there. You have a AT&T device? Here is a TWRP flashable backup http://bugsylawson.com/files/file/1829-m7-twrp-nandroid-backup-cid-cws-001-12950210/.
Please remove imei from first post!
gee2012 said:
Here are all available RUU`s, OTA`s and CWM/TWRP firmwares http://forum.xda-developers.com/showthread.php?t=2207874. Hope you find something there. You have a AT&T device? Here is a TWRP flashable backup http://bugsylawson.com/files/file/1829-m7-twrp-nandroid-backup-cid-cws-001-12950210/.
Click to expand...
Click to collapse
Thanks. The last time i tried, it failed. I was told the error was due to model id mismatch. Should I be editing my phone's Model ID and CID or should I just edit the android.txt file?
gee2012 said:
Here are all available RUU`s, OTA`s and CWM/TWRP firmwares http://forum.xda-developers.com/showthread.php?t=2207874. Hope you find something there. You have a AT&T device? Here is a TWRP flashable backup http://bugsylawson.com/files/file/1829-m7-twrp-nandroid-backup-cid-cws-001-12950210/.
Click to expand...
Click to collapse
also, with the TWRP flashable backup, you're saying I could flash that then do OTA updates? would i have to re-lock bootloader? will I have to go s-on?
spark plugs. said:
also, with the TWRP flashable backup, you're saying I could flash that then do OTA updates? would i have to re-lock bootloader? will I have to go s-on?
Click to expand...
Click to collapse
After the flash you would have to flash the stock recovery for that RUU and do a factory reset afterwards to get OTA`s. Your phone will stil be flagged as a test device if you have S-Off and/or a unlocked bootloader (maybe there is a fix for that so look on XDA/Google for that).
I don't necessarily need OTA, just want the latest firmware
Sent from my HTC One using xda app-developers app
Bump for more info
Sent from my HTC One using xda app-developers app
spark plugs. said:
Bump for more info
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
What do you need to know?
To install the latest firmware, do I need stock RUU or can I just change CID to supercid?
Which firmware can I install with supercid?
What's the process for installing?
Sent from my HTC One using xda app-developers app
spark plugs. said:
To install the latest firmware, do I need stock RUU or can I just change CID to supercid?
Which firmware can I install with supercid?
What's the process for installing?
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
1. Read this thread for unlocking the bootloader and getting S-Off http://forum.xda-developers.com/showthread.php?t=2314582.
2. Read this thread for writing supercid (11111111) http://forum.xda-developers.com/showthread.php?t=2317536
3. Choose a RUU from here and download it (do not extract it) http://forum.xda-developers.com/showthread.php?t=2207874 and flash the file by opening it as administrator and your phone usb connected in fastboot mode.
This is great. I'm s-off already. I don't need to change mid do I?
Sent from my HTC One using xda app-developers app
spark plugs. said:
This is great. I'm s-off already. I don't need to change mid do I?
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
No, you don`t have to change the model ID.
great success. s-off, changed CID to 11111111, flashed firmware with this guide:
http://forum.xda-developers.com/showpost.php?p=42586614&postcount=25330
switched CID back. all is well.
Hello! Thank u in advance of helping me.
this is my phone info in HBOOT:
Tampered
Unlocked
m7_ul pvt ship s-off rh
cid-cws__001
hboot-1.54.0000
radio-4a.17.3250.14
opendsp-v31.120.274.0617
os-
emmc-boot 2048mb
________________________
i have touch recovery installed, but nothing on my phone storage to flash.
after get s-off my phone wont start. htc logo appears and then goes black screen.
please help me , because im loosing my mind on that...
thank u a lot!!!
Try here:
http://forum.xda-developers.com/showthread.php?t=2318497
Sent from my HTC One using xda premium
Potapson said:
Try here:
http://forum.xda-developers.com/showthread.php?t=2318497
Sent from my HTC One using xda premium
Click to expand...
Click to collapse
tried it. gives me error even when type "adb devices" it shows me that its attached...
Can you access bootloader ?
Btw it's not bricked if you can get into bootloader.
Sent from my HTC One using XDA Premium 4 mobile app
Shan89 said:
Can you access bootloader ?
Btw it's not bricked if you can get into bootloader.
Sent from my HTC One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
i can get it ...
Just flash your RUU rom.zip and you're all set.
This might help: http://forum.xda-developers.com/showthread.php?t=2497614
electronical said:
Just flash your RUU rom.zip and you're all set.
This might help: http://forum.xda-developers.com/showthread.php?t=2497614
Click to expand...
Click to collapse
can u give it whats it? i really dont want to mess up the things and i need my phone .... :I
i go to cid: htc_001. tell me what RUU i need please
kokobaliev said:
i go to cid: htc_001. tell me what RUU i need please
Click to expand...
Click to collapse
You need to know your MID as well as your CID. Watch out for the M7 UL or M7 U in the filename (make the correct choice): http://www.htc1guru.com/downloads/ruu-file-downloads/
If you're still having difficulty to find/choose your RUU, just follow step 1 from the guide (link in my previous reply) and post it here, but remove your serial and imei.
electronical said:
You need to know your MID as well as your CID. Watch out for the M7 UL or M7 U in the filename (make the correct choice): http://www.htc1guru.com/downloads/ruu-file-downloads/
If you're having difficulty to find/choose your RUU, just follow step 1 from the guide (link in my previous reply) and post it here, but remove your serial and imei.
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4166mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d16dc66985
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
kokobaliev said:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4166mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d16dc66985
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
This RUU should work fine for you. :cyclops:
http://www.htc1guru.com/dld/ruu_m7_...1-27_10-31-1131-05_release_310878_signed-exe/
Just download and run it. Keep it safe if you ever need to return to 100% stock again. Your S-OFF and unlocked bootloader will stay unchanged and you will be able to receive OTAs.
An alternate solution would have been to adb push a stock/custom ROM to your device and then flash it in custom recovery, but maybe the RUU method is easier for you.
electronical said:
This RUU should work fine for you. :cyclops:
http://www.htc1guru.com/dld/ruu_m7_...1-27_10-31-1131-05_release_310878_signed-exe/
Just download and run it. Keep it safe if you ever need to return to 100% stock again. Your S-OFF and unlocked bootloader will stay unchanged and you will be able to receive OTAs.
An alternate solution would have been to adb push a stock/custom ROM to your device and then flash it in custom recovery, but maybe the RUU method is easier for you.
Click to expand...
Click to collapse
THANK U MAN! i managed to turn on my phone with this RUU but now i have another problem.
the ruu was android version 4.1 and i managed to update it to 4.2.2 + the little fix (30mb) and now it shows me that my device is up to date and theres no update for it.
what to do to update to 4.3?
kokobaliev said:
THANK U MAN! i managed to turn on my phone with this RUU but now i have another problem.
the ruu was android version 4.1 and i managed to update it to 4.2.2 + the little fix (30mb) and now it shows me that my device is up to date and theres no update for it.
what to do to update to 4.3?
Click to expand...
Click to collapse
Glat that it worked out for ya , you should have system version with 401 in it , it's interational EU base , you should have update on your phone , i've got it when i went back to stock to apply OTA. if it doesn't work use THIS http://www.htc1guru.com/dld/guru_reset_m7_2-24-401-1-zip/
It's stock HTC One rom , the one you need , that's the one i used and applied ota i'm HTC_032 cid , it's pretty much same like yours since the 401 base supports more cids like yours HTC_001 , 401 rom has these cids :
HTC__001, HTC__E11
HTC__102, HTC__203
HTC__405, HTC__Y13
HTC__304, HTC__032
HTC__A07, HTC__J15
Click to expand...
Click to collapse
you need to flash recovery , then flash this , it has aroma options , you'll get prompted to flash STOCK RADIO and STOCK RECOVERY , check those 2 and let it flash , after that you'll get few minor updates then the big one 675 mb sense 5.5 and 4.3 , this worked for me should work for you as well.
Shan89 said:
Glat that it worked out for ya , you should have system version with 401 in it , it's interational EU base , you should have update on your phone , i've got it when i went back to stock to apply OTA. if it doesn't work use THIS http://www.htc1guru.com/dld/guru_reset_m7_2-24-401-1-zip/
It's stock HTC One rom , the one you need , that's the one i used and applied ota i'm HTC_032 cid , it's pretty much same like yours since the 401 base supports more cids like yours HTC_001 , 401 rom has these cids :
you need to flash recovery , then flash this , it has aroma options , you'll get prompted to flash STOCK RADIO and STOCK RECOVERY , check those 2 and let it flash , after that you'll get few minor updates then the big one 675 mb sense 5.5 and 4.3 , this worked for me should work for you as well.
Click to expand...
Click to collapse
Тhank u for your quick response! I have 1 last question. Now my phone is unrooted. 1st i need to root it to flash recovery or i can go flash recovery via fastboot without rooting it?
edit: the other question is if i want to flash Android Revolution 31ver. can i do it right now ? in this phone codition?
kokobaliev said:
Тhank u for your quick response! I have 1 last question. Now my phone is unrooted. 1st i need to root it to flash recovery or i can go flash recovery via fastboot without rooting it?
edit: the other question is if i want to flash Android Revolution 31ver. can i do it right now ? in this phone codition?
Click to expand...
Click to collapse
1. At 1st question you need unlocked bootloader , if you have s-off you can do it without need of htc ( also no need to lock bootloader when applying ota ) then you flash recovery via fastboot after that go to recovery and flash the Rom I gave you link for and update to latest 3.62 with new hboot and radio. ( remember to select when flashing the Rom above " flash stock radio / recovery " )
After applying ota you can flash recovery of your choice and flash any Rom. My suggestion is do what I wrote here mainly so you get latest hboot / radio. Then make a nandroid backup of stock Rom and keep it for next ota.
2nd question :
Yes you can flash any Rom on any hboot version we have right now. But it's adviced to apply latest hboot / radio for better compatibility.
@ rooting , root is not needed for flashing roms all you need is unlocked bootloader for recovery , this isn't Sony :sly:
Sent from my HTC One using XDA Premium 4 mobile app
Shan89 said:
1. At 1st question you need unlocked bootloader , if you have s-off you can do it without need of htc ( also no need to lock bootloader when applying ota ) then you flash recovery via fastboot after that go to recovery and flash the Rom I gave you link for and update to latest 3.62 with new hboot and radio. ( remember to select when flashing the Rom above " flash stock radio / recovery " )
After applying ota you can flash recovery of your choice and flash any Rom. My suggestion is do what I wrote here mainly so you get latest hboot / radio. Then make a nandroid backup of stock Rom and keep it for next ota.
2nd question :
Yes you can flash any Rom on any hboot version we have right now. But it's adviced to apply latest hboot / radio for better compatibility.
@ rooting , root is not needed for flashing roms all you need is unlocked bootloader for recovery , this isn't Sony :sly:
Sent from my HTC One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
thanks a lot man! im already on Android Revolution 31. thank u for helping me!
Hey guys,
Sorry if I am in the wrong place for this question but I am completely stuck. I recently bought a HTC One M7 which was rooted. I did not know this when I was buying it. The new update came out and my phone asked me to update. I hit yes. My phone switched off and didn't come back on. After extensive research I got it back on to find the following:
1) It was rooted
2)Bootloader started up and TWRP is on the phone
3) There is now nothing on the phone. No firmware or packages at all
4) When I try to flash anything I get the error message: can't mount to system. I can mount to everything else ok just not internal storage.
I am unsure what recovery image and RUU to use. The phone (I was told was unlocked) was O2(Giffgaff).
Details are:
***Tampered***
***Unlocked***
M7_UL PVT SHIP S-ON RH
HBOOT-1.55.0000
Radio-4A.21.3263.04
OpenDSP-v32.120.724.0909
OS-3.62.206.1
eMMC-boot 2048MB
Oct 18 2013, 00:29:38. 0
IMAGE CRC
rpm: 0xC5567FC
sbl1: 0x9FE7A28C
sbl2: 0XA915A4DD
sbl3: 0xB221B6BB
tz: 0XCCD5DF62
radio: 0XEFA42613
hboot: 0xC174663B
boot: 0x94C89910
recovery: 0x59BF6CD
system: 0xFF83AB1
Any help at this stage would be greatly appreciated! I am about to just give up and bin it...
Thanks in advance!
When does it fail mounting system? When flashing a ROM in TWRP or flashing an RUU?
aooga said:
When does it fail mounting system? When flashing a ROM in TWRP or flashing an RUU?
Click to expand...
Click to collapse
it seems to be both. I try to flash RUU via fastboot and I get a signature fail. So I try to flash a ROM to the phone and it says failed to mount system. I put the items on a usb and tried it but get an 'unable to unzip' error. Its a bit above me to be honest. Thank you so much for helping.
olimoh8464 said:
it seems to be both. I try to flash RUU via fastboot and I get a signature fail. So I try to flash a ROM to the phone and it says failed to mount system. I put the items on a usb and tried it but get an 'unable to unzip' error. Its a bit above me to be honest. Thank you so much for helping.
Click to expand...
Click to collapse
... buddy when bootloader is unlocked and phone s-on, no ruu will work. now for ruu to flash you need to relock the bootloader and then run ruu. it will surely flash :victory: ...
Devilish_Angel said:
... buddy when bootloader is unlocked and phone s-on, no ruu will work. now for ruu to flash you need to relock the bootloader and then run ruu. it will surely flash :victory: ...
Click to expand...
Click to collapse
When you say run the RUU to you mean the RUU from the desktop or directly from the phone? How do I know if I have the correct RUU? the closest one I could find was for O2 and the radio was the same down to the last digit being different. Sorry for sounding stupid but it is a lot to take in for such a noob. I read that I need to flash a boot recovery image and then run the RUU is that right?
olimoh8464 said:
When you say run the RUU to you mean the RUU from the desktop or directly from the phone? How do I know if I have the correct RUU? the closest one I could find was for O2 and the radio was the same down to the last digit being different. Sorry for sounding stupid but it is a lot to take in for such a noob. I read that I need to flash a boot recovery image and then run the RUU is that right?
Click to expand...
Click to collapse
... run it from desktop while phone in bootloader. no need to run boot image ...
olimoh8464 said:
When you say run the RUU to you mean the RUU from the desktop or directly from the phone? How do I know if I have the correct RUU? the closest one I could find was for O2 and the radio was the same down to the last digit being different. Sorry for sounding stupid but it is a lot to take in for such a noob. I read that I need to flash a boot recovery image and then run the RUU is that right?
Click to expand...
Click to collapse
RUU must match your CID number.
I add you here link to a good thread:
http://forum.xda-developers.com/showthread.php?t=2358738
tetakpatalked from Nexus 7 flo
Devilish_Angel said:
... buddy when bootloader is unlocked and phone s-on, no ruu will work. now for ruu to flash you need to relock the bootloader and then run ruu. it will surely flash :victory: ...
Click to expand...
Click to collapse
This is wrong. You can flash the ruu that mathches the cid and mid of your phone even with a locked bl.
Sent from my GT-I9505 using Tapatalk
Thank you for the advice and the link! I will go try this now and let you know how I get on!
aooga said:
This is wrong. You can flash the ruu that mathches the cid and mid of your phone even with a locked bl.
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
... did i say something different than what you are saying ...
@aooga Angel's point was S-On, I think.
tetakpatalked from the legendary i9000
olimoh8464 said:
Hey guys,
Sorry if I am in the wrong place for this question but I am completely stuck. I recently bought a HTC One M7 which was rooted. I did not know this when I was buying it. The new update came out and my phone asked me to update. I hit yes. My phone switched off and didn't come back on. After extensive research I got it back on to find the following:
1) It was rooted
2)Bootloader started up and TWRP is on the phone
3) There is now nothing on the phone. No firmware or packages at all
4) When I try to flash anything I get the error message: can't mount to system. I can mount to everything else ok just not internal storage.
I am unsure what recovery image and RUU to use. The phone (I was told was unlocked) was O2(Giffgaff).
Details are:
***Tampered***
***Unlocked***
M7_UL PVT SHIP S-ON RH
HBOOT-1.55.0000
Radio-4A.21.3263.04
OpenDSP-v32.120.724.0909
OS-3.62.206.1
eMMC-boot 2048MB
Oct 18 2013, 00:29:38. 0
IMAGE CRC
rpm: 0xC5567FC
sbl1: 0x9FE7A28C
sbl2: 0XA915A4DD
sbl3: 0xB221B6BB
tz: 0XCCD5DF62
radio: 0XEFA42613
hboot: 0xC174663B
boot: 0x94C89910
recovery: 0x59BF6CD
system: 0xFF83AB1
Any help at this stage would be greatly appreciated! I am about to just give up and bin it...
Thanks in advance!
Click to expand...
Click to collapse
Post a fastboot getvar all
RUU.exe files or ROM Update Utility files are executable files that run on Windows PC
RUU.zip files are simply the same as above but rather than using a Windows exe file to run them, they are packaged in a zip file that can be flashed in Fastboot mode
The RUU has to match your CID/MID. If your S-On, the RUU as to be same version or higher
Sent from my Nexus 7 using XDA Premium 4 mobile app
Devilish_Angel said:
... did i say something different than what you are saying ...
Click to expand...
Click to collapse
Uh..yeah. You said:
when bootloader is unlocked and phone s-on, no ruu will work
Click to expand...
Click to collapse
bored_stupid said:
Post a fastboot getvar all
RUU.exe files or ROM Update Utility files are executable files that run on Windows PC
RUU.zip files are simply the same as above but rather than using a Windows exe file to run them, they are packaged in a zip file that can be flashed in Fastboot mode
The RUU has to match your CID/MID. If your S-On, the RUU as to be same version or higher
Sent from my Nexus 7 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks! Is there any way you could tell me the correct RUU to download? I will post a fastboot getvar all after work this evening. I tried one that I thought was right but when I click to run it as administrator I get prompted with the normal are you sure? click yes and nothing happens. It just doesn't run. Tried downloading it again but still nothing. Any ideas?
olimoh8464 said:
Thanks! Is there any way you could tell me the correct RUU to download? I will post a fastboot getvar all after work this evening. I tried one that I thought was right but when I click to run it as administrator I get prompted with the normal are you sure? click yes and nothing happens. It just doesn't run. Tried downloading it again but still nothing. Any ideas?
Click to expand...
Click to collapse
Yeah no problems. Off to work myself now, but will post correct link if any and possible other solutions.
Sent from my HTC One using XDA Premium 4 mobile app
bored_stupid said:
Yeah no problems. Off to work myself now, but will post correct link if any and possible other solutions.
Sent from my HTC One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
C:\Users\milo\Desktop\Newest>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.62.206.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA366W900013
(bootloader) imei: 3578640********
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: O2___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3965mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bb768ae1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.047s
OMG My phone literally did the same exact thing today!! I woke up, a few things were force closing so I decided that I would just reboot the phone...... Big mistake, once I did that, the phone just stayed in the booting up animation. So I figured hey what ever ill just reflash the ROM in TWRP.......Nope, couldn't boot into recovery either, the phone would flash the TWRP screen then just reset itself. Again, I thought no biggie ill just reinstall TWRP. This (again) proved to be useless, after multiple (successful) install's the phone still refused to boot into TWRP. So I finally got CWM to install, a noticed a few things at the bottom of the screen about something not being mounted properly, I didn't pay that much attention to it, i just wanted my phone back at that point. I tried to wipe my phone for a fresh flash, but as soon as the wipe began the phone reset itself. At this point I was on the brink of throwing this thing into the torrential down-pour that god decided to place in my city.
Next I tried to install Viper ROM because I knew it had a wipe functionality built into it's Aroma installer. Went through all the checklists got to the start install screen, clicked next, and then began to wipe......... and then reset again........
So finally I got TWRP reinstalled, and go install a fresh ROM and and immediately met with a screen full of : "Unable to Mount XXXXXXX" (Picture attached). So then I figure alright well my last resort has to be to use a RUU. Found this nice little thread (http://forum.xda-developers.com/showthread.php?t=2316726) and decided to use the FUU (4.19.401.11 Full Wipe). Unfortunately all that did was move my HBoot from 1.4 (or something like that) to 1.5 (or something like that), put the tamper flag back, and bring back the annoying red text at the bottom of the phone at boot (the thing about development build, blah blah blah). I reinstalled TWRP yet again hoping for the best, but still nothing. It cant seem to mount anything (what ever that means).
So now im here, stuck using my old One X. Any suggestions or answers or criticism would be very much appreciated.
Thank you!!!!!
olimoh8464 said:
C:\Users\milo\Desktop\Newest>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.62.206.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA366W900013
(bootloader) imei: 3578640********
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: O2___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3965mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bb768ae1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.047s
Click to expand...
Click to collapse
This is the RUU.exe you require. Run from PC
http://www.htc1guru.com/dld/ruu_m7_..._10-38r-1157-04l_release_353143_signed_2-exe/
Sent from my HTC One using XDA Premium 4 mobile app
bored_stupid said:
This is the RUU.exe you require. Run from PC
http://www.htc1guru.com/dld/ruu_m7_..._10-38r-1157-04l_release_353143_signed_2-exe/
Sent from my HTC One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks for that! I have downloaded it and tried to run it but it doesn't open? I get the loading message after I click run as administrator but nothing happens. Do I need HTC sync installed or deleted for this?
Thanks
olimoh8464 said:
Thanks for that! I have downloaded it and tried to run it but it doesn't open? I get the loading message after I click run as administrator but nothing happens. Do I need HTC sync installed or deleted for this?
Thanks
Click to expand...
Click to collapse
Did you check the MD5
4961fdbbadba53c9640f3638f56faec1
When you say nothing happens.. Doesn't it even try to run?
Sent from my HTC One using XDA Premium 4 mobile app
I have unlocked htc one m7_ul model no.PN07200
and it is s-off and already rooted want to update to stock lolipop .
I m using it in india with gsm carrier
And in bootloader mode it shows this
**locked**
M7_UL PVT SHIP S-OFF RH
CID-11111111
HBOOT- 1.57.0000
RADIO- 4T.27.3218.14
OpenDSP- v32.120.274. 0909
OS- 5.12.708.3
eMMC-boot - 2048
I google for my htc one some site says its sprint version and it is cdma but i m using gsm carrier and it is working fine ��. Does it really sprint version ???
It's definitely not Sprint version. If it was, it would say m7_wls instead of m7_ul
livinsacrfice said:
It's definitely not Sprint version. If it was, it would say m7_wls instead of m7_ul
Click to expand...
Click to collapse
Is it that so plz help me or suggest some thread where i can find where this device belongs
http://forum.xda-developers.com/htc-one/help
Hi,
I moved it to the correct section
livinsacrfice said:
http://forum.xda-developers.com/htc-one/help
Click to expand...
Click to collapse
I was asking about the thread but u have given me the link or whole section.....
Sent from my HTC One using XDA Free mobile app
sharartiprashant said:
I have unlocked htc one m7_ul model no.PN07200
and it is s-off and already rooted want to update to stock lolipop .
I m using it in india with gsm carrier
And in bootloader mode it shows this
**locked**
M7_UL PVT SHIP S-OFF RH
CID-11111111
HBOOT- 1.57.0000
RADIO- 4T.27.3218.14
OpenDSP- v32.120.274. 0909
OS- 5.12.708.3
eMMC-boot - 2048
I google for my htc one some site says its sprint version and it is cdma but i m using gsm carrier and it is working fine ��. Does it really sprint version ???
Click to expand...
Click to collapse
look back side of phone and tell model id PN07???
sprint is world phone it works fine with GSM
yatindroid said:
look back side of phone and tell model id PN07???
sprint is world phone it works fine with GSM
Click to expand...
Click to collapse
At the back side of phn modelno. PN07200 is written.
And in bootloader i have showed it above .
Sent from my HTC One using XDA Free mobile app
sharartiprashant said:
At the back side of phn modelno. PN07200 is written.
And in bootloader i have showed it above .
Sent from my HTC One using XDA Free mobile app
Click to expand...
Click to collapse
what is the output of "fastboot getvar all" ?
yatindroid said:
look back side of phone and tell model id PN07???
sprint is world phone it works fine with GSM
Click to expand...
Click to collapse
sharartiprashant said:
At the back side of phn modelno. PN07200 is written.
And in bootloader i have showed it above .
Sent from my HTC One using XDA Free mobile app
Click to expand...
Click to collapse
just FYI, I have an M7_UL modelid: PN0710000, but on the back it says PN07140 (<- yep only 7 characters, not 9)
and I know it wasnt changed, as i bought it the UK in April 2013 (ie no S-OFF back then for the M7)
only way to tell for sure, is by getvar as @alray mentioned
nkk71 said:
just FYI, I have an M7_UL modelid: PN0710000, but on the back it says PN07140 (<- yep only 7 characters, not 9)
and I know it wasnt changed, as i bought it the UK in April 2013 (ie no S-OFF back then for the M7)
only way to tell for sure, is by getvar as @alray mentioned
Click to expand...
Click to collapse
PN07140 is m7_ul for south east asia I think any stock shortage led them supply this no print and PN07100 internally flashed system
but most of case both are identical until modified mid or changed housing
best way to find out hardware type is fastboot showing m7_ul or m7_wls else can be modified
alray said:
what is the output of "fastboot getvar all" ?
Click to expand...
Click to collapse
This the output of getvar
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\atom>cd c:\fastboot_adb\
C:\fastboot_adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.27.3218.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.12.708.3
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT**4W******
(bootloader) imei: ****************
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3896mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-1f512bb6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.094s
Sent from my HTC One using XDA Free mobile app
sharartiprashant said:
This the output of getvar
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\atom>cd c:\fastboot_adb\
C:\fastboot_adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.27.3218.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.12.708.3
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3896mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-1f512bb6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.094s
Sent from my HTC One using XDA Free mobile app
Click to expand...
Click to collapse
Its PN0712000 not PN072000 (sprint)
PN0712000 was originally a Developer edition, Google Play Edition, At&t branded, or could be any Canadian carriers (Bell, Telus, Rogers)
The phone is s-off, supercid and PN0712000 which is good things. You can flash what you want, the simplest would be to flash the latest developer edition lollipop ruu. Ruu posted in my thread (link in my signature). But to flash a lollipop ruu, your phone must be at least on kitkat firmware or above (6.xx.xxx.x or above) so you'll first need to flash the 6.02.1540.2 full (not firmware extracted from ota) firmware and then the 7.17.1540.7 ruu.
If you want to go that route and need more help to flash these files, just ask here, unless you want to keep that x.xx.708.x version which is an Asian software version and update it to lollipop.
And btw, edit out your IMEI and SERIALNO from your getvar above, don't post these numbers.
alray said:
Its PN0712000 not PN072000 (sprint)
PN0712000 was originally a Developer edition, Google Play Edition, At&t branded, or could be any Canadian carriers (Bell, Telus, Rogers)
The phone is s-off, supercid and PN0712000 which is good things. You can flash what you want, the simplest would be to flash the latest developer edition lollipop ruu. Ruu posted in my thread (link in my signature). But to flash a lollipop ruu, your phone must be at least on kitkat firmware or above (6.xx.xxx.x or above) so you'll first need to flash the 6.02.1540.2 full (not firmware extracted from ota) firmware and then the 7.17.1540.7 ruu.
If you want to go that route and need more help to flash these files, just ask here, unless you want to keep that x.xx.708.x version which is an Asian software version and update it to lollipop.
And btw, edit out your IMEI and SERIALNO from your getvar above, don't post these numbers.
Click to expand...
Click to collapse
I just want lolipop update with any method by staying on this firmware or either leave this firmware and one more thing after update should i have to do sim unlock for using my carrier in this and btw thanx for helpin' me bro and what about the s-off, super cid , and root ?
Sent from my HTC One using XDA Free mobile app
sharartiprashant said:
I just want lolipop update with any method by staying on this firmware or either leave this firmware and one more thing after update should i have to do sim unlock for using my carrier in this and btw thanx for helpin' me bro and what about the s-off, super cid , and root ?
Sent from my HTC One using XDA Free mobile app
Click to expand...
Click to collapse
staying on x.xx.708.x firmware and updating it to lollipop will require to change your MID. x.xx.708.x version use PN0714000 MID.
Its up to you, you can either change your mid, flash the 7.xx.708.x firmware and then the 7.xx.708.x RUU
or you can flash the 6.07.1540.2 firmware and then the 7.17.1540.7 ruu
If your phone is already sim-unlocked, it will stay unlocked, no worry.
alray said:
staying on x.xx.708.x firmware and updating it to lollipop will require to change your MID. x.xx.708.x version use PN0714000 MID.
Its up to you, you can either change your mid, flash the 7.xx.708.x firmware and then the 7.xx.708.x RUU
or you can flash the 6.07.1540.2 firmware and then the 7.17.1540.7 ruu
If your phone is already sim-unlocked, it will stay unlocked, no worry.
Click to expand...
Click to collapse
6.07.1540.2 Reset Rom Download:
6.07.1540.2 Signed RUU.exe
6.07.1540.2 OTA update zip file
6.07.1540.2 Firmware patch
6.07.1540.2 stock firmware (full)
7.17.1540.7 Signed RUU.exe
7.17.1540.7 TWRP nandroid backup
OTA update zip 7.17.1540.7
stock Firmware patch (firmware package from OTA.zip) 7.17.1540.7
No red text hboot (modded hboot) 7.17.1540.7
/data/preload folder for 7.17.1540.7
Which one from the 6 series and which one 7series and thanx a lot frnd!
Sent from my HTC One
sharartiprashant said:
6.07.1540.2 Reset Rom Download:
6.07.1540.2 Signed RUU.exe
6.07.1540.2 OTA update zip file
6.07.1540.2 Firmware patch
6.07.1540.2 stock firmware (full)
7.17.1540.7 Signed RUU.exe
7.17.1540.7 TWRP nandroid backup
OTA update zip 7.17.1540.7
stock Firmware patch (firmware package from OTA.zip) 7.17.1540.7
No red text hboot (modded hboot) 7.17.1540.7
/data/preload folder for 7.17.1540.7
Which one from the 6 series and which one 7series and thanx a lot frnd!
Yes my phone is sim unlocked
Sent from my HTC One
Click to expand...
Click to collapse
Sent from my HTC One using XDA Free mobile app
sharartiprashant said:
6.07.1540.2 Reset Rom Download:
6.07.1540.2 Signed RUU.exe
6.07.1540.2 OTA update zip file
6.07.1540.2 Firmware patch
6.07.1540.2 stock firmware (full)
7.17.1540.7 Signed RUU.exe
7.17.1540.7 TWRP nandroid backup
OTA update zip 7.17.1540.7
stock Firmware patch (firmware package from OTA.zip) 7.17.1540.7
No red text hboot (modded hboot) 7.17.1540.7
/data/preload folder for 7.17.1540.7
Which one from the 6 series and which one 7series and thanx a lot frnd!
Sent from my HTC One
Click to expand...
Click to collapse
download and save the 6.07.1540.2 stock firmware (full) zip file in the same folder you have fastboot and adb on your computer,
open a command window from this folder (or change directory to that folder in the command window).
Reboot your phone in bootloader / fastboot usb mode
Code:
fastboot oem rebootRUU
phone will reboot in ruu mode, a black screen with silver HTC logo then:
Code:
fastboot flash zip Firmware_6.07.1540.2.zip
Wait for the process to complete, it should report something like "failed, flush image again immediately" so proceed with the same command again:
Code:
fastboot flash zip Firmware_6.07.1540.2.zip
Now it should report something like "flashed successfully". If yes you can proceed with the next command (the green progress bar on your phone might not reach 100% but its safe to proceed with the next command if fastboot reported "flashed successfully")
Code:
fastboot reboot-bootloader
phone will now reboot in bootloader. You can now execute the 7.17.1540.7 ruu.exe, follow instructions from the application.
Remember that this will wipe everything on your phone, like if it was brand new so don't forget to backup your important files before if any.
If something goes wrong, post here, don't reboot the phone or quit the ruu mode if the second "fastboot flash zip" failed.
take your time and everything should be fine
alray said:
download and save the 6.07.1540.2 stock firmware (full) zip file in the same folder you have fastboot and adb on your computer,
open a command window from this folder (or change directory to that folder in the command window).
Reboot your phone in bootloader / fastboot usb mode
Code:
fastboot oem rebootRUU
phone will reboot in ruu mode, a black screen with silver HTC logo then:
Code:
fastboot flash zip Firmware_6.07.1540.2.zip
Wait for the process to complete, it should report something like "failed, flush image again immediately" so proceed with the same command again:
Code:
fastboot flash zip Firmware_6.07.1540.2.zip
Now it should report something like "flashed successfully". If yes you can proceed with the next command (the green progress bar on your phone might not reach 100% but its safe to proceed with the next command if fastboot reported "flashed successfully")
Code:
fastboot reboot-bootloader
phone will now reboot in bootloader. You can now execute the 7.17.1540.7 ruu.exe, follow instructions from the application.
Remember that this will wipe everything on your phone, like if it was brand new so don't forget to backup your important files before if any.
If something goes wrong, post here, don't reboot the phone or quit the ruu mode if the second "fastboot flash zip" failed.
take your time and everything should be fine
Click to expand...
Click to collapse
Will my phn loose s- off and supercid
Sent from my HTC One using XDA Free mobile app
sharartiprashant said:
Will my phn loose s- off and supercid
Sent from my HTC One using XDA Free mobile app
Click to expand...
Click to collapse
No, phone will stay s-off unless you manually turn it back s-on by using the appropriate fastboot command. Stay s-on. Same thing for CID, it will stay supercid unless you change it using the appropriate fastboot command.