Hello. Can anyone tell me if it is possible to make a flash through Smart flash or nvflash on our phones?
My device is with the driver NV damaged and need repairs it. Common flash via KDZ or LGFlash will not solve the situation.
Thanks in advance!
Sent from my GT-N7100 using xda premium
Related
Guys, I'm soft-bricked and looking for somebody who can help how I can re-flash cdrom partition in the fastboot.
The old one from 2.3.6 roms are not flashing, INFOpreflash validation failure.
I tried to use dumped cdrom partition from dd, it's mostly same, but I can't flash it using moto-fastboot.
Any suggestion?
I stuck in the fastboot, nothing else is available.
UPDATE.
here is the want to buy thread.
http://forum.xda-developers.com/showthread.php?t=1793023
I want to buy Motorola Droid 4 XT894 broken, any ESN, cracked screen, no water damage, fully working motherboard. Battery is not important, but preffered.
Shipping is possible to USA or Russia. Payment by paypal.
Make your offers to me in PM.
Click to expand...
Click to collapse
I would do a full flash of. 219, then do the jump ics flash in the Droid 4 Upated Utility and it should work, I did something similar and it seemed to work for me and I even kept all my data.
Sent from my DROID4 using xda premium
moah909 said:
I would do a full flash of. 219, then do the jump ics flash in the Droid 4 Upated Utility and it should work, I did something similar and it seemed to work for me and I even kept all my data.
Sent from my DROID4 using xda premium
Click to expand...
Click to collapse
Flashing 219 is ending up with error cdrom partition in fastboot mode. No go after.
cdrom partition from 2.3.6 219 doesn't want to flash after ics leak.
updated thread, please let me know if somebody has broken droid4
Does anyone know how to full flash Lg optimus 2x Su660..
as i did update of ICS on it now i am unable to use CWM every time when i try to use nvflash it gives an error Command failed: partition download error and some thing like nv 140000...
i think i have done something wrong with the partition of my cell phone so i want to full format(flash) it and again make new partitions. if anyone knows it please help me out.
and suggest me a stable Rom or any official update for my korean Su660.
Are you sure you have a SU660? Is it made in Korea? Because that says nothing, you only know if you have a hard home button and no search button. Try smartflash otherwise you're pretty much screwed.
Sent from my Optimus 2X using xda app-developers app
I assume you already made a backup. Nvflash is more powerful than smart flash. Make sure you're in apx mode when using Nvflash.
Sent from my LG-SU660 using xda premium
Hi dears,
After installing CWM Installer_V10F, the phone does not opened. It does not pass lg screen. However I tried factory reset, no change happened. How can i solve it?
Thanks.
before you're flashing,what's firmware do you use?
in thai forum has people can not boot like you.He use v10c and he flash cwm for v10f.I reccommend him re-flash .kdz again to solve problem.
Sent from my LG-P880 using xda app-developers app
somboons said:
before you're flashing,what's firmware do you use?
in thai forum has people can not boot like you.He use v10c and he flash cwm for v10f.I reccommend him re-flash .kdz again to solve problem.
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
I was used official v10c and I tried install v10f using cwm. But the phone was brick. I re-flashed v10f kdz and it worked successfully. The problem is be solved but I don not understand what is problem.
Hey,
I come from a Stock 2.3.4 ROM for LG Optimus 2x (P990). Wanted to install the latest Cyanogenmod and booted into Recovery, did the 3 wipe steps but then I couldnt find my zip from Cyanogenmod on my external SD. So I rebooted and only the LG logo showed up. Only solution was to flash it and for that I used a stock T-Mobile ROM which was U.S. (so I cant even use my SIM card there, Wifi is working though) But I didnt know it was for P999 and I have a German P990.
So now I'd like to either go back to Stock ROM or go straight to Cyanogenmod but I cannot do a SmartFlash Tool reset as it doesnt recognize my phone as P990. I tried dozens different methods but just would like to go back and then to flash to Cyanogenmod as my Stock ROM was 1&1 carrier branded (branded, NOT SIM locked) and couldnt update to the latest Android version and was basically stuck on 2.3.4.
Did this method too (http://forum.xda-developers.com/showthread.php?t=2585264), it goes into "S/W Upgrade Please wait while upgrading..." but SmartFlash Tool doesnt recognize the phone as P990 due to the P999 ROM probably (LG USB driver installed, APX driver also).
Aio toolkit works wonders in this situation ....u can download it from development section ....install apx driver first which is included in toolkit ....
Pm for further help if needed
Sent from my LG-P990 using Tapatalk 2
gxmu28 said:
Aio toolkit works wonders in this situation ....u can download it from development section ....install apx driver first which is included in toolkit ....
Pm for further help if needed
Sent from my LG-P990 using Tapatalk 2
Click to expand...
Click to collapse
No it doesnt. As I mentioned I did this and it gave out an error. Could not locate partition or something. Bootloader is okay the toolkit said.
Goa11 said:
No it doesnt. As I mentioned I did this and it gave out an error. Could not locate partition or something. Bootloader is okay the toolkit said.
Click to expand...
Click to collapse
Can you post an image of the error?
Sent from my Nexus 5 using xda app-developers app
Did u try nv flash instead of smartflash?
Sent from my LG-P990 using xda premium
I'd suggest NV flash too.
Sent from my LG-P990 using xda premium
Have you tried ProgMaq's Full Brick Repair tool?
http://forum.xda-developers.com/showthread.php?t=1975274
Hi everyone.
Yesterday night i tried to install twrp recoveryon my Lg L90 (d405).
I rooted it, and i installed aboot.img, and flashed twrp.zip.
After that, i restarted the phone, but it was dead.
Nothing hapend, when i wanted to turn on, same thing for the firmware upgrade screen, and nothing when i pluged in the charger.
I found a solution here at xda, i reinstalled the rom, but it was v20b, and i had v20a.
And now i even cant take back the v20a rom. If i flash a v20a rom with LG flash tool 2014, evrything is okay, but my rom is still v20b. Even i cant flash v20b, when i flash a KitKat v10c, and after that i flash v20a.
My IMEI also lost. And my wifi dosent work with v20b, and no roaming.
I use the v10c Kitkat now.
Sorry for my bad english.
Can anyone help flash the v20a rom?
Hi. Did you use LG Flashtool in emergency mode as it is explained in the thread to relock the phone? Make sure you use a kdz for the exact phone model you have.
http://forum.xda-developers.com/showthread.php?t=2803479
[Easy][GUIDE][UNROOT][RELOCK BOOTLOADER]Flash Stock KDZ Offline LG L90 [All Variants]
Sent from my LG-D410 using XDA Free mobile app
lfom said:
Hi. Did you use LG Flashtool in emergency mode as it is explained in the thread to relock the phone? Make sure you use a kdz for the exact phone model you have.
http://forum.xda-developers.com/showthread.php?t=2803479
http://imgur.com/Lh8rPM7
Sent from my LG-D410 using XDA Free mobile app
Click to expand...
Click to collapse
http://imgur.com/Lh8rPM7
I do the same u told, but nothing.
Do you have any other idea?
Sorry, I don't have any other ideas...
If you flashed the wrong kdz for your model, probably you have to find a tutorial to wipe everything for your model (there are many D405, remove the battery and look for your exact model), or perhaps the post for hard brick that requires that you disassemble your phone.
Sent from my LG-D410 using XDA Free app