I bought a HTC One charger from Amazon, and when I try to charge my phone it connects but does not stay connected. Any ideas what I can do to get the charger to charge my phone?
Well. If it's a 2 piece charger, usb and converter unplug the Usb and connect it to ur pc. Does it connect? Or try a different wall outlet. Try it on a different device. Most likely it's defective if nothing works
Sent from my HTC One
Related
I have a tilt that now will charge from the USB to computer connection, but does not charge when plugged into the wall with my wall charger (an after-market charger that worked fine until today). The phone says "charging" but actually loses battery power .. and after a while the orange charging light goes off.
Any thoughts -- sure is a drag to have to charge my phone through the laptop.
What after market wall charger do you have? Does it use the USB cord to charge? I'm assuming that you plug the USB cord into the wall charger and then into your phone. If so this will not work. The USB cable is only capable of trickle charging. If you are doing anything while it is charging over USB you will use power faster than the trickle charger can provide. You have to charge it with a wall charger that does NOT use the USB cable.
Yes I realize that the standard wall charger uses a mini-USB plug but the internals of the cable are not the same as a data USB cable. The difference in juice it can provide is like comparing a PVC pipe to straw.
I was just using a radio shack iGo charger with a usb tip ... it worked fine until my latest ROM upgrade.
Ahh I see. Yep the charger is most likely bad.
HI Guys
I have a Tytn II and recently I went abroad, and the phone said MM#6 phone not allowed.
Now I'm back in my home country, but now my phone will not charger from any charger ( I have tried more than 1), however it will charge ok using a car charger.
If I plug it into the PC , it does not detect the phone, I done a hard reset, and that didn't fix it.
Can anyone help me with this problem or any trouble shooting idea's.
Oh and I took the battery out and put it back in.
Thanks
xltsport said:
HI Guys
I have a Tytn II and recently I went abroad, and the phone said MM#6 phone not allowed.
Now I'm back in my home country, but now my phone will not charger from any charger ( I have tried more than 1), however it will charge ok using a car charger.
If I plug it into the PC , it does not detect the phone, I done a hard reset, and that didn't fix it.
Can anyone help me with this problem or any trouble shooting idea's.
Oh and I took the battery out and put it back in.
Thanks
Click to expand...
Click to collapse
The PC should charge it regardless if the OS knows what is going on. The phone will just pull the 5V off of the USB and charge the phone. It is not like some other phones (my motorola IDEN i335) that require a PC driver to be installed to charge. There may be something wrong with your PC or cable if it's not charging up. Have you tried wiggling the cable or blowing out the port? I have a few USB cables that require some attention in order to work. Hope that helps.
Hi there, thanks for your help.
I tried several USB cables, and chargers, some HTC chargers and a generic one, but none of them charge the phone up. I've tried wiggling the cable , blown air in it etc.
Its weird as it charges from the car charger no problem at all, just not off the PC , or a normal charger....arghh don't know what to do with it.
xltsport said:
Hi there, thanks for your help.
I tried several USB cables, and chargers, some HTC chargers and a generic one, but none of them charge the phone up. I've tried wiggling the cable , blown air in it etc.
Its weird as it charges from the car charger no problem at all, just not off the PC , or a normal charger....arghh don't know what to do with it.
Click to expand...
Click to collapse
it won't charge off of a normal charger either?! Sounds like you have some black magic goin on
Hey there....
Nope wont charge off a normal charger
Wont charge off a USB cable
but WILL charge off a car charger.
Have you checked the HTC website? I was just there on another issue and seem to recall seeing something in the FAQs about this issue.
nope
thanks for the help bud, but that FAQ if for phones that charge off AC adapters but not of usb
mine doesnt charge ofan AC or a USB...ONLY a car charger
Hey there Xlt, What contry did you go to and what country are you from?
If you went to a country with a 220v and your charger only supports 110v you may of damage the charger and the phone with the voltage difference and vice visa.
The car charger may work because it is only coming from a 12v power supply, you could buy a adapter that lets you use the car charger in the home socket and then see if it works to see if it was the volt difference.
Hope that Helps
When I first got the phone earlier this week, I could plug it into the charger in the wall just fine with no issues, it would just charge. Now suddenly it started telling me USB connected and goes to the MTP screen and of course locks up the phone.
I can of course bypass this by switching the phone to mass storage mode, but since I have Kies and use it occasionally, it would be nice to not have to switch that setting each time depending on my charging/syncing situation.
Why would it have not locked it up with the MTP screen originally when charging from the wall but now it does? The results are the same whether its plugged into the wall or the USB port on the computer. I have two Captivates bought brand new on a family plan, both do this now with any combination of chargers and USB cables, wall USB port, or car charger. Neither one has a common application installed since the other is my girlfriends who hasnt done much to it yet, so Im blaming the phone itself for now...
~T.J.
Interesting. I just checked with my BB charger and they dont do it using that charger, but they do it as soon as I connect the stock charger again.
Im wondering if its a voltage sensing circuit thats tripping due to the different voltages which should be applied - either wall charger or USB port. Maybe for some reason my wall chargers arent putting out enough voltage and its thinking its a USB port, but the BB charger is putting the right amount of voltage out?
Am I on base as to how it differentiates between wall or USB port? The number of pins obviously doesnt matter as all the cables have all the pins in them, unlike some charger cables which only have the power and ground. The only thing I can think of is that it uses the amount of voltage/current to tell the difference and create its reaction.
~T.J.
Sounds like a problem with the stock charger, maybe usb cable alignment. My iphone wall adapter does this with the samsung cable but the samsung wall adapter doesn't, same with my car charger from att. Also I have a $5 walmart car charger that has a cable that splits into both a mini usb and a micro usb that isn't a real usb cable, it's charge only. That cable has no problem on any wall or car adapter. I believe the phone detects if its connected by checking voltage on a data pin (just a guess really) so if a nonstock charger is used it assumes that it is a computer. But it may also be a data signal that is given off by the charger.
Sent from my SAMSUNG-SGH-I897 using Tapatalk
did you try a new charger and if so, did it work? I've had my captivate since Thursday and on Thursday it charged and everything fine, but then yesterday,
a) no computer I connect it to while recognize it, no matter what I have it set too and have latest drivers installed
b) if I charge it, after I unplug it, it locks up to black screen and I have to remove the battery to get it to work
c) I also have an in-dash touchscreen monitor in my car that has a usb port because it works with an ipod. I plugged the usb into to use it as a car charger, unplugged it, same thing
d) it did say usb connected after it was unplugged, but I switched from mass storage to ask on connection and it went away
so is an actual wall charger the solution?
Sent from my SAMSUNG-SGH-I897 using XDA App
and now I unplug it, and if it locks, it will not unlock, just black screen
I have to take out the battery and then only way to get it to turn back on, is to plug it back in the wall
Sent from my SAMSUNG-SGH-I897 using XDA App
^^^Ouch that's not right, if you can't figure it out you may need to re-flash or just bring it back under warranty, or insurance
Sent from my SAMSUNG-SGH-I897 using Tapatalk
after years of not issue, yesterday my note stop charging in the outlet chargers, I have several all do not charge it but have no issues charge my wifes phone.
but I can charge the phone with the same orig cable when the usb is my computer and not the outlet.
any clues why my phone will charge in my computer with same cable but not in orig outlet plug. please tell me I do have to have my $2K high end gaming desktop on just to charge my phone in its usb slot.
I cleaned everything, it is a new battery
-----------
any help is apprecaited
I guess problem is in your adapter..try different adapter and see if it helps
Sent from my AweSoMe ?♥Note2♥?
I have tried 4 different adapter/cords combos ( just in my house) none of them charge my phone in an outlet - all work with my wife's smaller samsung in output. so weirdly only a direct usb with the oem cord to computer works ( in both my desk and laptop). so weird. so annoying.
You have to buy a new charging port, and the board that comes with it. This is a link to the part you need. If you search "n7000 charging port flex ribbon" you should be able to find other places that have it. http://www.etradesupply.com/oem-samsung-galaxy-note-gt-n7000-charging-port-flex-cable-ribbon.html
So, I have the official Sony DK48 dock for my Z3 Compact (no case). The phone will recognize that it is connected to the dock by giving the notification sound, but the battery will not charge while on it. I've tried wiggling it all sorts of different ways, and tried at least 3 different USB cables, but still no dice.
Is anyone else having this issue?
Have you used original cable? I had this problem with some poor quality cables, they were too thin inside for the designed current
plug it in the mains...
techguyone said:
plug it in the mains...
Click to expand...
Click to collapse
With 'mains' you can mean so many things.
I guess you mean plug the cable in an electrical outlet, rather then in a computer. I believe that I had the same issue. (Worked fine in an outlet)
The DK48 will only charge the phone when power comes from the mains. It does not charge the phone when connected to a USB port of a PC or laptop.
Use the original charger and the original cable that came with your phone and the Z3/Z3C should charge just fine in the DK48; that's at least what my does.
Yes all of my attempts occurred while plugging the dock into the AC adapter that came with the phone.
I guess then it seems like its a faulty DK48...
It should work with the original cable, adapter and electric outlet (not a PC).
Why wouldn't the DK48 charge through PC? How does it know? Amperes?
The input from the computer is too low even when you plug the USB to 3.0 port... Unfortunately you MUST use wall charger for the DK48 to be working.
Lazer72 said:
Why wouldn't the DK48 charge through PC? How does it know? Amperes?
Click to expand...
Click to collapse
I am a bit late in this thread, but I will post it anyway in case somebody has the same problem. Dk48 won't charge phone while connected to PC, because it checks if data lanes in Micro USB port are used. If they are, charging is stopped. If someone wants to charge phone using dock connected to PC (I for example connect it to my active USB hub, which is connected to my PC) it is necessary to use Micro USB cable, which doesn't use data lanes, just charging ones.
I hope it will help somebody.