[Q] Did I brick my phone/fried emmc? - One (M7) Q&A, Help & Troubleshooting

Ok so long story short,, I think I messed my htc one pretty bad today.
1)I installed 1.28.401.7 update from this thread:http://forum.xda-developers.com/showthread.php?t=2305490 <----I changed the CID of the phone to 11111 when doing this
2)After that I installed the custom rom from trickdroid.
3)Then I installed the 30 steps volume or something and my phone would just freeze with the htc boot logo. After several on and off and still being freezed, I think I erased the current rom.
4)Then with NO rom on the phone , I changed the Model ID and basically here's my info from the txt that I filled in:
modelid: PN07120
cidnum:HTC__Y13 VZW__001
mainver: 1.28.401.7
btype:1
aareport:1
hbootpreupdate:12
I followed this guide to do the above steps
http://forum.xda-developers.com/showthread.php?t=2322820
Only after flashing that PN07120(model id found in the back of the phone) that I read on fastboot that the model number was PN0712000.
But still everything went fine and my phone was already unlocked and s-off before I changed CID and MID. My phone was now displaying HTC_001 and PN071000 as model.
After trying to reflash the 1.28.401.7 firmware, I had no luck...tried the:
RUU_M7_UL_JB_50_Cingular_1.26.502.12
RUU_M7_UL_JB_50_BrightstarUS_WWE_1.29.1540.3 but still no luck.
when I do adb devices, it doesn't find any device...after that I tried a fastboot command to relock the bootloader and it DID work. So fastboot is working. But nothing can be mounted while i'm in recovery e.g can't mound /sd card....etc
So I'm basically left with a phone with no rom, just bootloader(relocked) and recovery(cwm). Any help would be really appreciated. I'm quite stressed right now for having damaged my phone permanently and being such a noob .
About to go to bed, I'll try to flash via RUU.zip and will post tomorrow. if i get any success

Dude, you're messing around with incredibly sensitive partitions and parameters in a really haphazard way, I'm surprised your device isn't already bricked. However if you can use fastboot then you're phone is likely salvageable. You could try following this guide to push a ROM to your phone and flash that to get it running again. Is your phone now s-off?

Related

restore to stock?

my mic isn't working and need to take in, I have a modified hboot, can I run stock RUU or do I need to revert my hboot? if so, does anyone have a link?
jpwhre said:
my mic isn't working and need to take in, I have a modified hboot, can I run stock RUU or do I need to revert my hboot? if so, does anyone have a link?
Click to expand...
Click to collapse
assuming you are s-off you can ruu any version you like, there are a few threads in the development section with some ruu's....but it will still show s-off, you can re-write the security flag with a fastboot command, I am sure a googel search will find the command...
flash recovery locked bootloader
mcerk02 said:
assuming you are s-off you can ruu any version you like, there are a few threads in the development section with some ruu's....but it will still show s-off, you can re-write the security flag with a fastboot command, I am sure a googel search will find the command...
Click to expand...
Click to collapse
thanks, going thru process of removing "relocked"
found these threads but for vzw and att
http://forum.xda-developers.com/showthread.php?t=2358738
http://forum.xda-developers.com/showthread.php?t=2475914
http://forum.xda-developers.com/showthread.php?t=2441299
download for flashing recovery on locked device comes with twrp for vzw and this command txt
modelid: PN0731000
cidnum: VZW__001
mainver: 1.10.605.8
btype:1
aareport:1
hbootpreupdate:3
I know if I change
cidnum to SPCS__001
mainver to 3.04.651.2 since that is the ruu I ran
and put a sprint twrp recovery in, I can flash the zip in bootloader, but I don't know if I change the modelid to pn072 or pn0721000
jpwhre said:
thanks, going thru process of removing "relocked"
found these threads but for vzw and att
http://forum.xda-developers.com/showthread.php?t=2358738
http://forum.xda-developers.com/showthread.php?t=2475914
http://forum.xda-developers.com/showthread.php?t=2441299
download for flashing recovery on locked device comes with twrp for vzw and this command txt
modelid: PN0731000
cidnum: VZW__001
mainver: 1.10.605.8
btype:1
aareport:1
hbootpreupdate:3
I know if I change
cidnum to SPCS__001
mainver to 3.04.651.2 since that is the ruu I ran
and put a sprint twrp recovery in, I can flash the zip in bootloader, but I don't know if I change the modelid to pn072 or pn0721000
Click to expand...
Click to collapse
You know we have a FAQ Guide for Sprint right?
Please don't mess with those links or you may end up with a shiny brick.
jpwhre said:
thanks, going thru process of removing "relocked"
found these threads but for vzw and att
http://forum.xda-developers.com/showthread.php?t=2358738
http://forum.xda-developers.com/showthread.php?t=2475914
http://forum.xda-developers.com/showthread.php?t=2441299
download for flashing recovery on locked device comes with twrp for vzw and this command txt
modelid: PN0731000
cidnum: VZW__001
mainver: 1.10.605.8
btype:1
aareport:1
hbootpreupdate:3
I know if I change
cidnum to SPCS__001
mainver to 3.04.651.2 since that is the ruu I ran
and put a sprint twrp recovery in, I can flash the zip in bootloader, but I don't know if I change the modelid to pn072 or pn0721000
Click to expand...
Click to collapse
Dont mess with links from verizon or att, not gonna end well, maybe a simpler way to accomplish your goal is to flash a stock rom, and flash a hex edited hboot, that is exactly what I did when I returned mine for repairs, its simple, a sprint tech wouldnt know the difference, if sending to HTC, I am sure they will know.... read this... http://forum.xda-developers.com/showthread.php?t=1786498 ....you can create an edited hboot to flash to your device, will be strictly cosmetic, and flash a stock rom, or a stock backup you may have made before you started modding.....a local sprint tech aint gonna know the difference.....
USB data will not work
I am S ON and my PC will not recognize by phone. I have win 8.1 using the updated universal naked drivers. My phone was recognized under this configuration for a couple months. I have tried several USB cords in different USB ports. I have tried three other computers. When I plug the phone into an outlet, I get a Slow Charge notification. When I try to run ADB Devices command on terminal after running ADB mode in TWRP I receive error: no Devices Found.
It seems obvious that I have a faulty USB port. Is there a way to return to stock without connecting to a computer and ridding TAMPERED from HBOOT? I just want to return to Sprint and see if one of the Techs can fix .
Thanks

HTC One RUU Problems

So I've searched this forum and other forums numerous times before I posted this. Androidcentral, amongst other forums, and i still can't find a solution to my many RUU problems.
Basically AT&T is making me send my phone back, I rooted it, S-Off, And my bootloader is currently unlocked. Every time I try and used RUU, I get errors ranging from Error 155, to Error 170. Sometimes RUU will begin to flash my phone back to stock. But then my phone hangs at the HTC One silver logo, and I have to restart the phone because it won't go any further.
I have tried to lock my bootloader, as well as unlock it, and S-Offed my phone and tried it with S-On and I am still getting numerous errors. It managed to start flashing once, and put me back on HBOOT 1.44, from HBOOT 1.55, and it seems like it doing that has made my problems worse.
I DO have the correct RUU exe for my phone, I'm certain of it, and now whenever I go to manually push the .ZIP file through ADB, it hangs on the screen that says waiting for device, or when I try and getvar as well.
Any solutions would be greatly appreciated. I'm usually very very very very knowledgeable about rooting and unrooting and going back to factory stock on numerous phones. But this is my first HTC.
S-Off
HBOOT 1.44 from 1.55
modelid: PN0712000
cid: CWS__001
EasyTiger6x13 said:
So I've searched this forum and other forums numerous times before I posted this. Androidcentral, amongst other forums, and i still can't find a solution to my many RUU problems.
Basically AT&T is making me send my phone back, I rooted it, S-Off, And my bootloader is currently unlocked. Every time I try and used RUU, I get errors ranging from Error 155, to Error 170. Sometimes RUU will begin to flash my phone back to stock. But then my phone hangs at the HTC One silver logo, and I have to restart the phone because it won't go any further.
I have tried to lock my bootloader, as well as unlock it, and S-Offed my phone and tried it with S-On and I am still getting numerous errors. It managed to start flashing once, and put me back on HBOOT 1.44, from HBOOT 1.55, and it seems like it doing that has made my problems worse.
I DO have the correct RUU exe for my phone, I'm certain of it, and now whenever I go to manually push the .ZIP file through ADB, it hangs on the screen that says waiting for device, or when I try and getvar as well.
Any solutions would be greatly appreciated. I'm usually very very very very knowledgeable about rooting and unrooting and going back to factory stock on numerous phones. But this is my first HTC.
S-Off
HBOOT 1.44 from 1.55
modelid: PN0712000
cid: CWS__001
Click to expand...
Click to collapse
Are you on Win8.1? hboot 1.44 doesn't play nice with Win 8.1
take a look at my guide (also the FAQs!!!), http://forum.xda-developers.com/showthread.php?t=2541082
and use the RUU.ZIP method using: http://www.htc1guru.com/dld/ruu-zip-m7_ul_jb_50_cingular-1-26-502-12-zip/

[Q] (HELP) Stuck in bootloader, no USB-debugging

Hi,
I'm really stressing out right now because my HTC one is stuck in bootloader and i think i've tried everything.
Basically i thought it would be fun to root my phone (first time), i used the cyanogenmod installer. But i really did not like the looks of thing and actually wanted to go back to sense 6. Although i can't really remember what i actually did to remove CM, but i managed to. And now all i get is the fastboot/bootloader screen.
Adb won't recognize my phone, USB-debugging is turned off, S-ON, and bootloader is RELOCKED.
I have not flashed a recovery even though i did try to but failed.
I really have no clue what to do now.
Please is there still a solution or did i screw up my phone for good?
Thanks in advance, Giagi
Giagi said:
Hi,
I'm really stressing out right now because my HTC one is stuck in bootloader and i think i've tried everything.
Basically i thought it would be fun to root my phone (first time), i used the cyanogenmod installer. But i really did not like the looks of thing and actually wanted to go back to sense 6. Although i can't really remember what i actually did to remove CM, but i managed to. And now all i get is the fastboot/bootloader screen.
Adb won't recognize my phone, USB-debugging is turned off, S-ON, and bootloader is RELOCKED.
I have not flashed a recovery even though i did try to but failed.
I really have no clue what to do now.
Please is there still a solution or did i screw up my phone for good?
Thanks in advance, Giagi
Click to expand...
Click to collapse
first thing is first, get your bootloader unlocked again, you cant do anything to fix your phone before you do that, and that is why the recovery failed to install, once that is done, download and install TWRP recovery 2.6.3.3 from here: http://techerrata.com/browse/twrp2/m7 it has the best success rate, and flash it.
Fastboot commands are for when you are in the bootloader, ADB is only for when you are in recovery and in a ROM.
Once all that is done you will be able to push and flash any custom ROM.
ps, put USB debugging out of your mind, it has nothing to do with what you are trying to do.
Thanks for your respond. But as far as i can tell i either need to enable USB-debugging in order to unlock bootloader, or i need to do it via htcdev for which i need adb to recognize my phone. Or did i miss anything?
I did not use the htcdev method the first time so i do not have a token.
Giagi said:
Thanks for your respond. But as far as i can tell i either need to enable USB-debugging in order to unlock bootloader, or i need to do it via htcdev for which i need adb to recognize my phone. Or did i miss anything?
I did not use the htcdev method the first time so i do not have a token.
Click to expand...
Click to collapse
Do you have your USB drivers installed on your computer, can you post a screen shot of your device manager whilst your phone is plugged into the PC ?
USB debugging is only for when you are booted into a ROM, and as you don't have a working rom on your phone, it doesn't apply.
Are you S-OFF ?
If not then you will have to goto HTC Dev and follow their instructions on how to unlock your bootloader
Put your phone in bootloader mode, plug it into the PC, it will then say fastboot USB, not ADB USB, ie fastboot commands not ADB commands.
post your fastboot getvar all please.
Seanie280672 said:
Do you have your USB drivers installed on your computer, can you post a screen shot of your device manager whilst your phone is plugged into the PC ?
USB debugging is only for when you are booted into a ROM, and as you don't have a working rom on your phone, it doesn't apply.
Are you S-OFF ?
If not then you will have to goto HTC Dev and follow their instructions on how to unlock your bootloader
Put your phone in bootloader mode, plug it into the PC, it will then say fastboot USB, not ADB USB, ie fastboot commands not ADB commands.
post your fastboot getvar all please.
Click to expand...
Click to collapse
First of all, thank you so much! I've now been able to unlock bootloader and flash CWM.
But there's just one more thing, and i'm sorry but i'm very noob with this: How can i find and install the stock HTC ROM (sense 6)?
I downloaded Android Revolution HD 71.1 and installes the zip via CWM but it does not seem to work.
EDIT: Im an S-On
And as requested my getvar all:
Code:
version: 0.5
version-bootloader: 1.57.0000
version-baseband: 4T.27.3218.14
version-cpld: None
version-microp: None
version-main: 5.11.1540.9
version-misc: PVT SHIP S-ON
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: HTC__E11
battery-status: good
battery-voltage: 4329mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-e47fb74b
hbootpreupdate: 11
gencheckpt: 0
Giagi said:
First of all, thank you so much! I've now been able to unlock bootloader and flash CWM.
But there's just one more thing, and i'm sorry but i'm very noob with this: How can i find and install the stock HTC ROM (sense 6)?
I downloaded Android Revolution HD 71.1 and installes the zip via CWM but it does not seem to work.
Click to expand...
Click to collapse
It doesn't work because you installed CWM, I said install TWRP recovery 2.6.3.3, most custom rom's require that recovery, it should also mention that in the original thread of the rom you flashed.
I will need your fastboot getvar all output in order to know what your stock rom is.
Seanie280672 said:
It doesn't work because you installed CWM, I said install TWRP recovery 2.6.3.3, most custom rom's require that recovery, it should also mention that in the original thread of the rom you flashed.
I will need your fastboot getvar all output in order to know what your stock rom is.
Click to expand...
Click to collapse
I'm sorry I meant TWRP. Got them confused. But i have installed TWRP.
Giagi said:
I'm sorry I meant TWRP. Got them confused. But i have installed TWRP.
Click to expand...
Click to collapse
You have developer edition on your phone ? 5.11.1540.9
did you put that on there yourself ?
Your CID-HTC__E11 states you should have WWE 401.
Just to confirm, could you tell me what it says in you bootloader beside os- ??????????
Seanie280672 said:
You have developer edition on your phone ? did you put that on there yourself ?
Just to confirm, could you tell me what it says in you bootloader besides os- ??????????
Click to expand...
Click to collapse
I did not put developer edition on my phone knowingly.
OS-5.11.1540.9
It used to be something else 5.11.401.10 i believe.
Giagi said:
I did not put developer edition on my phone knowingly.
OS-5.11.1540.9
It used to be something else 5.11.401.10 i believe.
Click to expand...
Click to collapse
yup 401 is your correct version for your CID, the strange thing is, you can only flash firmware if you are s-off, or if you had a lower firmware first.
this is your correct stock reset file, but I wouldn't flash it myself as your firmware doesn't match anymore: http://www.htc1guru.com/dld/guru_reset_m7_3-62-401-1-zip/
Stock ROM version for these types:
modelid: PN0710000
cid: HTC__001, HTC__E11
HTC__102, HTC__203
HTC__405, HTC__Y13
HTC__304, HTC__032
HTC__A07, HTC__J15
HTC__016
im sorry but I don't have any experience with dev edition firmware and not sure which ruu's etc you can flash, maybe one of the other senior members can guide you from here.
But if I was to be up front with you, especially with you being s-on, I would say you were stuck with custom rom's only now, as you cant back flash or flash the correct firmware without s-off.
Seanie280672 said:
yup 401 is your correct version for your CID, the strange thing is, you can only flash firmware if you are s-off, or if you had a lower firmware first.
this is your correct stock reset file, but I wouldn't flash it myself as your firmware doesn't match anymore: http://www.htc1guru.com/dld/guru_reset_m7_3-62-401-1-zip/
Stock ROM version for these types:
modelid: PN0710000
cid: HTC__001, HTC__E11
HTC__102, HTC__203
HTC__405, HTC__Y13
HTC__304, HTC__032
HTC__A07, HTC__J15
HTC__016
im sorry but I don't have any experience with dev edition firmware and not sure which ruu's etc you can flash, maybe one of the other senior members can guide you from here.
But if I was to be up front with you, especially with you being s-on, I would say you were stuck with custom rom's only now, as you cant back flash or flash the correct firmware without s-off.
Click to expand...
Click to collapse
And this one?: http://forum.xda-developers.com/showthread.php?t=2183023
I believe it's a custom ROM but i've not been able to get it to work.
Do you know of a way to revert back to the original OS? (preferable with S-On)
Giagi said:
And this one?: http://forum.xda-developers.com/showthread.php?t=2183023
I believe it's a custom ROM but i've not been able to get it to work.
Do you know of a way to revert back to the original OS? (preferable with S-On)
Click to expand...
Click to collapse
try fastboot erase cache and then try flash this one: http://www.androidrevolution.org/downloader/download.php?file=One_5.11.401.10_odexed.zip
again make sure its with twrp 2.6.3.3
Seanie280672 said:
try fastboot erase cache and then try flash this one: http://www.androidrevolution.org/downloader/download.php?file=One_5.11.401.10_odexed.zip
again make sure its with twrp 2.6.3.3
Click to expand...
Click to collapse
WOW, Thank you sooo much!!!
I'm running the ROM you sent and my htc backup is restoring my phone to it's original state.
I am so happy right now. I really appreciate your help.
I've donated you some money, it's not much and i'm sorry for that, but it's all i have on my paypal account currently.
Again, many thanks.
Giagi said:
WOW, Thank you sooo much!!!
I'm running the ROM you sent and my htc backup is restoring my phone to it's original state.
I am so happy right now. I really appreciate your help.
I've donated you some money, it's not much and i'm sorry for that, but it's all i have on my paypal account currently.
Again, many thanks.
Click to expand...
Click to collapse
Ive refunded it back to you, I don't expect donations for helping people out, I don't know where that button came from below my user name and don't know how to get rid of it.
Hit the thanks button is perfectly enough.
Seanie280672 said:
Ive refunded it back to you, I don't expect donations for helping people out, I don't know where that button came from below my user name and don't know how to get rid of it.
Hit the thanks button is perfectly enough.
Click to expand...
Click to collapse
Sorry, to bother you again, but it seems as if my problem is not completely resolved.
Every time i shut down my phone it goes into a bootloop, where it boots up, stay on for about 2 mins where it just works as normal, and then shuts down again. After which it reboots again and so on.
The first time this happened i did a factory reset and this seemed to work. But after i shut down my phone for a second time the problem appeared again. And i really don't want to reset it again.

[Q] need some help by updating my m7

hey I want to update my htc one to 4.4 and get rid of twrp.
I´ve unlocked it via htcdev and installed twrp.
i have got s-on
hboot 1.54.0000
CID vodap120 (as far as i know this is still the orginal one)
can I just relock the phone or do i need stock recovery? (hop I´m useing the coreced terms here :/ )
if so can I follow this guide http://forum.xda-developers.com/showthread.php?t=2545227.
I remeber that I had to download some drivers when I unlocked the phone and I dont think that they are still on my computer. could someone send me a link to them?
thanks
joachim (austria)
You don't want to lock the bootloader unless you plan to reflash an RUU. with it unlocked you will just need to reflash to the stock recovery and then do your update. Are you trying to run an ota to 4.4?
Here is a link to drivers: http://forum.xda-developers.com/showthread.php?t=2232799
uuu91 said:
hey I want to update my htc one to 4.4 and get rid of twrp.
I´ve unlocked it via htcdev and installed twrp.
i have got s-on
hboot 1.54.0000
CID vodap120 (as far as i know this is still the orginal one)
can I just relock the phone or do i need stock recovery? (hop I´m useing the coreced terms here :/ )
if so can I follow this guide http://forum.xda-developers.com/showthread.php?t=2545227.
I remeber that I had to download some drivers when I unlocked the phone and I dont think that they are still on my computer. could someone send me a link to them?
thanks
joachim (austria)
Click to expand...
Click to collapse
This tool might be easier to use and quicker for getting the required ADB & Fastboot tools. Here is what is required to receive an OTA update. And yes, you will need your stock recovery installed. However, since you are on a lower hboot, it might be more beneficial to S-OFF first before the 4.4 update. S-OFF gives you more options going forward.
majmoz said:
This tool might be easier to use and quicker for getting the required ADB & Fastboot tools. Here is what is required to receive an OTA update. And yes, you will need your stock recovery installed. However, since you are on a lower hboot, it might be more beneficial to S-OFF first before the 4.4 update. S-OFF gives you more options going forward.
Click to expand...
Click to collapse
I couldn't agree more. the ability to change CID and flash any available RUU while bootloader unlocked is a huge advantage if you like to be adventurous with your devices' software.
first of all thanks for the quick reply
so more detail:
right know I´m getting the information that there has been an update issue.
I´m running on 4.2.2 (the software number is 2.24.161.1(I dont know how important that is or what it actually is)
after clicking on software-updates he told me that I can download 3.63.161.6
yes I want to make an ota update
need to reflash to the stock recovery
Click to expand...
Click to collapse
how do I do that. I need a file for that am i right? Which is the right one for me?
after reflashing stock recovery do i need to do something else.
oh yes i forgot to mention that i have super su. is that a problem?
ps I dont need advantages because I decided that I wont do any changes improvements to my system
uuu91 said:
first of all thanks for the quick reply
so more detail:
right know I´m getting the information that there has been an update issue.
I´m running on 4.2.2 (the software number is 2.24.161.1(I dont know how important that is or what it actually is)
after clicking on software-updates he told me that I can download 3.63.161.6
yes I want to make an ota update
how do I do that. I need a file for that am i right? Which is the right one for me?
after reflashing stock recovery do i need to do something else.
oh yes i forgot to mention that i have super su. is that a problem?
ps I dont need advantages because I decided that I wont do any changes improvements to my system
Click to expand...
Click to collapse
First, read this post about OTA Updates.
Next, you need to download two OTA files from this site. The 2.24.161.1 OTA and the 3.63.161.6 OTA will be used to update your phone.
After downloading the first (2.24 OTA) open up the zip and find the firmware.zip file. Open the firmware.zip and extract the recovery.img file from it. This file is your stock recovery. You flash it like you did your custom recovery by placing it in your ADB/Fastboot folder. Here are the steps:
In bootloader/FASTBOOT USB:
fastboot flash recovery recovery.img
fastboot erase cache
fastboot reboot-bootloader
Relock your bootloader with this command in FASTBOOT USB: fastboot oem lock
You can follow the steps in this post on Manually Installing OTAs.
Please read everything at least twice. If you don't understand something then don't hesitate to ask!
uuu91 said:
hey I want to update my htc one to 4.4 and get rid of twrp.
I´ve unlocked it via htcdev and installed twrp.
i have got s-on
hboot 1.54.0000
CID vodap120 (as far as i know this is still the orginal one)
can I just relock the phone or do i need stock recovery? (hop I´m useing the coreced terms here :/ )
if so can I follow this guide http://forum.xda-developers.com/showthread.php?t=2545227.
I remeber that I had to download some drivers when I unlocked the phone and I dont think that they are still on my computer. could someone send me a link to them?
thanks
joachim (austria)
Click to expand...
Click to collapse
much simpler way, as unlocking the bootloader deletes some files required to update, just leave twrp on your phone for the time being, and download this rom ive linked below, if your phone is currently booting up, then just plug it into the computer and move the zip file to your internal storage, then reboot into recovery and install it like you would do with any other rom, during the aroma installer, select wipe data, install stock recovery and install stock radio, upon reboot, you couldn't be anymore stock.
http://www.htc1guru.com/dld/guru_reset_m7_2-24-161-1-zip/
guru reset stock rom 2.24.161.1 Vodafone for the following devices:
modelid: PN0710000
cidnum: VODAP001
cidnum: VODAP102
cidnum: VODAPE17
cidnum: VODAP405
cidnum: VODAP304
cidnum: VODAPD18
cidnum: VODAP120
cidnum: VODAP110
I´ll follow your guide majmoz
why should i relock bootloader if unlocked doesnt matter?
thank you Seanie280672 but this sounds more complicated to me
i cant download that 2.24.161.1 OTA
error server cannot send any data
now i can.
so lets get started
fuuu
my antivirus tells me that one file in there is a virus.
is this serious?
what shell i do?

Please help me revive this sick m7

Hi Guys,
Bought an m7 cheap on ebay. I don't know anything about the history, except to say it's been fiddled with...
It powers up but it won't boot up; it hangs on the HTC logo.
Bootloader's unlocked, it's been rooted... S-ON
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: ** edited out **
(bootloader) imei: ** edited out **
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4297mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-e47fb74b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
I'm thinking I should try and take it back to stock, but I don't know where I should go from here and I'm worried I might screw it up.
Any help would be greatly appreciated
Thanks in advance!
Go to RUU mode and flash an RUU. There's a lot of threads explaining how to go to back to stock on this forum. If it still doesn't work, it might be an internal issue like the motherboard.
Can someone please recommend an RUU to go to... I'm just worried if I use the wrong one it will cause more issues. I thought RUUs were dependent on the CID num and as that's been changed to allow custom roms... I'd be happy taking it back to a plain old vanilla HTC / Google - just something to get it back alive.
Thanks
Should also add I can't get s-off... adb devices doesn't show anything... I'm guessing usb debugging wasn't set up
mdb said:
Can someone please recommend an RUU to go to... I'm just worried if I use the wrong one it will cause more issues. I thought RUUs were dependent on the CID num and as that's been changed to allow custom roms... I'd be happy taking it back to a plain old vanilla HTC / Google - just something to get it back alive.
Click to expand...
Click to collapse
There is no ruu we can recommend because your version-main is blank the fact that you also have superCID doesn't help identifying which ruu you'll need to use.
mdb said:
Should also add I can't get s-off... adb devices doesn't show anything... I'm guessing usb debugging wasn't set up
Click to expand...
Click to collapse
You'll have to unlock the bootloader, flash a custom recovery (twrp preferred), flash a rom and use your phone like that or, if you want, from there you will be able to achieve s-off again and convert your phone to wherever you want (Stock Sense or stock GPE) by flashing a RUU.
alray said:
There is no ruu we can recommend because your version-main is blank the fact that you also have superCID doesn't help identifying which ruu you'll need to use.
You'll have to unlock the bootloader, flash a custom recovery (twrp preferred), flash a rom and use your phone like that or, if you want, from there you will be able to achieve s-off again and convert your phone to wherever you want (Stock Sense or stock GPE) by flashing a RUU.
Click to expand...
Click to collapse
Thanks so much for this... I've been learning more all day (traditionally an iOS guy)...
Am I right in thinking I would need to sideload a custom rom through twrp and then install it? If so, I'm having an issue getting my laptop to talk to the phone - "adb devices" is pretty flakey to say the least, sometimes it works sometimes it doesn't... I've read various things about Windows 8 and that adb works best on Windows 7, can you please confirm I'm on the right track here. I'd like to put the Viper rom on it.
Thanks again
In order to flash custom recovery you need to be booted to bootloader menu, and use fastboot commands. If you flash TWRP 2.8.6.0 or later, there's no need to sideload a ROM because newer TWRP recoveries have MTP option, so you use that. Try to go to bootloader, connect your phone to your laptop or PC, and issue a command fastboot devices. If it shows your phone, you're good to go
Thanks donkeyking1...
I got it working eventually, I needed to install new drivers for Windows 8 then adb started behaving properly. I ended up pushing the Viper ROM to the phone... The phone's alive now but currently it has no IMEI, baseband or OS - they're all blank. I'm wondering if it's because I've installed Viper 9 without upgrading the firmware first? My next goals are to try and S-OFF the device so I can install a stock rom, at which point hopefully I'll get OTA updates and then go back to Viper 9 - it looks great, I just can't use it! - no phone signal!
Does that sound like the right approach? I'm trying to flash different custom roms to hopefully find one that works with rumrunner. I've read that some folks have managed to S-OFF on hboot 1.57 with rumrunner, but it's picky on the rom that's installed. It doesn't work on Viper 9...
If anyone can add any help it would be much appreciated!
Thanks in advance
mdb said:
Thanks donkeyking1...
I got it working eventually, I needed to install new drivers for Windows 8 then adb started behaving properly. I ended up pushing the Viper ROM to the phone... The phone's alive now but currently it has no IMEI, baseband or OS - they're all blank. I'm wondering if it's because I've installed Viper 9 without upgrading the firmware first? My next goals are to try and S-OFF the device so I can install a stock rom, at which point hopefully I'll get OTA updates and then go back to Viper 9 - it looks great, I just can't use it! - no phone signal!
Does that sound like the right approach? I'm trying to flash different custom roms to hopefully find one that works with rumrunner. I've read that some folks have managed to S-OFF on hboot 1.57 with rumrunner, but it's picky on the rom that's installed. It doesn't work on Viper 9...
If anyone can add any help it would be much appreciated!
Thanks in advance
Click to expand...
Click to collapse
flash the 7.19.401.2 firmware and then the 7.19.401.2 RUU. If you still have imei problem after that, its most likely an hardware defect.
relock your bootloader if not already locked or re-locked:
Code:
fastboot oem lock
Code:
fastboot orm rebootRUU
fastboot flash zip M7_UL_Firmware_7.19.401.2.zip
fastbppt flash zip M7_UL_Firmware_7.19.401.2.zip
fastboot reboot-bootloader
fastboot oem rebootRUU
htc_fastboot flash zip PN07IMG_M7_UL_L50_SENSE60_MR_HTC_Europe_7.19.401.2_Radio_4T.35.3218.16_10.33Q.1718.01L_release_421790_signed.zip
fastboot reboot
*** use htc_fastboot.exe for flashing the ruu (linked below). Save all files in the same folder where you already have fastboot.exe and adb.exe on your computer.
M7_UL_Firmware_7.19.401.2.zip
PN07IMG_M7_UL_L50_SENSE60_MR_HTC_Europe_7.19.401.2_Radio_4T.35.3218.16_10.33Q.1718.01L_release_421790_signed.zip
htc_fastboot.exe
Alray, just curious (still learning ), how do you know from the info I've given you that the firmware / RUU you've suggested is one to fix the issues - I've struggled to understand this the past few days - thanks!
mdb said:
Alray, just curious (still learning ), how do you know from the info I've given you that the firmware / RUU you've suggested is one to fix the issues - I've struggled to understand this the past few days - thanks!
Click to expand...
Click to collapse
To flash a ruu on a s-on phone there are many prerequisites:
The RUU must match your MID: 7.19.401.2 is for PN0710000
The RUU must match your CID: You have superCID so its not a problem.
The RUU must be the same version or an upgrade from your actual version, we don't know your actual version because of your blank versio-main but you have 1.57 hboot which suggest a 6.xx.xxx.x version. So 7.19.401.2 should be an upgrade.
The bootloader must be locked or re-locked.
There is no risk trying it, the worst that can happen is that the phone won't accept the ruu and nothing will be flashed.
mdb said:
Alray, just curious (still learning ), how do you know from the info I've given you that the firmware / RUU you've suggested is one to fix the issues - I've struggled to understand this the past few days - thanks!
Click to expand...
Click to collapse
Super CID + your MID. WWE firmware should work just fine. Right @alray?
donkeykong1 said:
Super CID + your MID. WWE firmware should work just fine. Right @alray?
Click to expand...
Click to collapse
:good:
Well, thanks so much for your help guys, but alas it seems the phone is k-put... Flashed the firmware and the rom no problem.... but it still shows no IMEI / IMEI SV / IMSI and it can't recognise the phone number - I'm guessing it can't read the sim. It does show the OS and IMEI in the bootloader, but once booted it's a no go.
mdb said:
Well, thanks so much for your help guys, but alas it seems the phone is k-put... Flashed the firmware and the rom no problem.... but it still shows no IMEI / IMEI SV / IMSI and it can't recognise the phone number - I'm guessing it can't read the sim. It does show the OS and IMEI in the bootloader, but once booted it's a no go.
Click to expand...
Click to collapse
Try to bend your sim tray just a little bit. Maybe your sim card is not reaching the contacts inside the phone. Or put a piece of paper under the sim and see what happens
Thanks donkeykong1, I've tried but it's not working... The fact the IMEI / IMEI SV and baseband are unknown though... they're not sim related...
It does show the baseband and IMEI in fastboot getvar all though?...
There were a lot of people with that same issue, and their phones worked fine, so I doubt it has anything to do with your sim. Your sim works in another phone?
Yeah, the sim's fine. @alray said it's likely a hardware issue if the firmware / rom didn't repair the IMEI issue, and the other threads I've looked at with the same issue are all saying the motherboard's faulty.
Although I am baffled as to why it is showing the IMEI / baseband in the bootloader, in fastboot etc. but not once the phone has booted up?...
I read on another thread (http://forum.xda-developers.com/showthread.php?t=2253514) that maybe flashing a kernal and/or radio might solve it?
Just wondering whether I should try flashing an official HTC rom? I've been in touch with the guy I got it off and he said it was originally on Orange, UK:
http://www.htcdev.com/devcenter/downloads > One M7 / v5.0.2 > Find Files : Page 6
One M7 / Orange / UK / CRC / 3.4.10 / v5.0.2 / 539.0 MB / 7.19.61.10
Was also thinking of...
http://www.htcdev.com/devcenter/downloads > One M7 / v5.0.2 > Find Files : Page 1
One M7 / HTC / EU / MR 3 / 3.4.10 / v5.0.2 / 486.0 MB / 7.19.401.22
If I did that would I need to update the firmware first like you advised originally @alray?
If I know I can revive the IMEI etc. I'll be happy to go ahead and pay to S-OFF
Thanks in advance
You need a kernel to match your firmware. If you're on 7.19.401.2, then you need 7.19.401.2 kernel. I can give you boot.img, but I don't have the whole zip, with modules. Then again, if your phone boots fine, maybe boot.img will help. I'd [email protected] to confirm my thoughts though. He's much more into this than I am

Categories

Resources