Database Develop

gingerDX alfs ROM graphics bug

installed as it should be. flashed to alfs rom, installed ginger dx v028, then installed alfs update patch and it seems to work fine.. Fresh install and after entering settings happens strange things, sometimes loading facebook app is just the same. Screen attached. Anyone know how to fix this? Never happened with earlier gingers on stock rom.
The thing is.. you have to touch a bit left of buttons, as the touch matrix is in correct position, but the graphics a float to the right. If i did not reboot, it floats more and more.
any help appreciated

*facepalm*
Sent from my E15i using xda app-developers app

Chris95X8 said:
*facepalm*
Sent from my E15i using xda app-developers app
Click to expand...
Click to collapse
thank you for a constructive colaboration..
anyone else who's too smart for me, please don't bother writing smiles..

This is "screen cut" !
Change governor to smartassV2!
It's bug in alfs if is yours governor ondemand!:cyclops:

change governor and cpu speed anything but 691

ngoralph said:
change governor and cpu speed anything but 691
Click to expand...
Click to collapse
thank you both!
any help on changing governor would be appreciated link? google doesn't find answers

Majklas said:
thank you both!
any help on changing governor would be appreciated link? google doesn't find answers
Click to expand...
Click to collapse
GH, dragons ahead did the trick
thank you very much for debugging!

Majklas said:
thank you both!
any help on changing governor would be appreciated link? google doesn't find answers
Click to expand...
Click to collapse
Go to Settings aplication and then go to CyanogenMod settings/Performance/CPU Settings/Available governors and choose Smartassv2 from that list
Sent from my E15i using xda app-developers app

Godra said:
Go to Settings aplication and then go to CyanogenMod settings/Performance/CPU Settings/Available governors and choose Smartassv2 from that list
Sent from my E15i using xda app-developers app
Click to expand...
Click to collapse
hmz, after reboot i still get the screen cut.. but i changed to smarass v2 and 746mhz

Majklas said:
hmz, after reboot i still get the screen cut.. but i changed to smarass v2 and 746mhz
Click to expand...
Click to collapse
Then reflash rom and kernel! Strange problem :silly:

Majklas said:
thank you for a constructive colaboration..
anyone else who's too smart for me, please don't bother writing smiles..
Click to expand...
Click to collapse
Thank you for not using the search feature and spamming our forums.
Sent from my E15i using xda app-developers app

2010matej said:
Then reflash rom and kernel! Strange problem :silly:
Click to expand...
Click to collapse
heh, the thing is.. after reboot all the settings get back. The set cpu setting at bootime is disabled

Majklas said:
heh, the thing is.. after reboot all the settings get back. The set cpu setting at bootime is disabled
Click to expand...
Click to collapse
You must to click in performance settings "set on boot" !

yes

Majklas said:
heh, the thing is.. after reboot all the settings get back. The set cpu setting at bootime is disabled
Click to expand...
Click to collapse
Please atleast check what all features you're phone provides you..
And read the bug log in the rom's thread b4 using any rom or kernel..
Now for you're problem go to performance settings as you did b4 change governor as b4
(recommended 600mhz smartassv2 overclocking will drain battery and is not good for cpu) (overclocking cpu means when you push you're cpu beyond its default limits, ours have 600mhz)
and at the bottom last option would be to "set on boot" just click on the box beside, it will be checked..
Now you shouldn't have any question, i guess..

Doubt about Kernel Zerogravity

Hey guys, I'm using kernel Zerogravity and there are several options governor, some being easier to understand as: powersave, ondemand and lgfree, but others are not so clear.
Could someone help me understand better how to work each of these governors?
Another question is about the options for I / O scheduler that can not fully understand the function of each option.
If complidado much explain everything, could you pass me some stuff where I can search on the subject?
Sorry my English, I use google translator.

http://forum.xda-developers.com/showthread.php?p=17131902
Its xda ull find answers to anything here so just search next time....
Hope this helps :beer::beer:
Sent from my LG-P970 using xda app-developers app

Ereckson said:
http://forum.xda-developers.com/showthread.php?p=17131902
Its xda ull find answers to anything here so just search next time....
Hope this helps :beer::beer:
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
Thank You!!

Ereckson said:
http://forum.xda-developers.com/showthread.php?p=17131902
Its xda ull find answers to anything here so just search next time....
Hope this helps :beer::beer:
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
Great, I didn't know all these things!
Up this thread just to ask if someone as tried any governor on V30b and how it work...
Inviato dal mio LG-P970 con Stock V30B

If you're on stock kernel, dont use the default ondemand governor cuz it wont get into deep sleep.
Instead change it to Interactive.
And about zero gravity kernel, I didnt really try it, but many people said many governors had weird scaling between freqs, so just a few governors acted normally. Someone made a small review about how governors are working on the kernels thread. =)

Grakel said:
If you're on stock kernel, dont use the default ondemand governor cuz it wont get into deep sleep.
Instead change it to Interactive.
And about zero gravity kernel, I didnt really try it, but many people said many governors had weird scaling between freqs, so just a few governors acted normally. Someone made a small review about how governors are working on the kernels thread. =)
Click to expand...
Click to collapse
Ok thank you, when I'll flash the repack V30b i'll try Interactive!
Inviato dal mio LG-P970 con Stock V30B

[Q&A Thread][KERNEL][T] DooMKernel {JB}

please use this thread to discuss the questions/queries you have regarding my kernel:
[KERNEL][T] DooMKernel {JB}
use the kernel thread only for reporting bugs...
please do not flood the development thread with non-development related questions...
DO NOT POST UNLESS YOU HAVE READ ALL THE POSTS IN BOTH OF THESE THREADS
REPEAT QUESTIONS WILL BE IGNORED

So what value do you recommed for ur kernel ??
1728 and the lowest
----
also my phone seems to be " hotter " now..I mean that it gets hot very quick with 1728 :-s.
------
also again can anyone make a quadrant test and tell me how much do you make...
With stock kernel I make 6600 but now 6000/5300 ....its wierd that the values are so " changed " ..

nemer12 said:
So what value do you recommed for ur kernel ??
1728 and the lowest
----
also my phone seems to be " hotter " now..I mean that it gets hot very quick with 1728 :-s.
------
also again can anyone make a quadrant test and tell me how much do you make...
With stock kernel I make 6600 but now 6000/5300 ....its wierd that the values are so " changed " ..
Click to expand...
Click to collapse
Yep, I've got 6000 after second run of quadrant test.
Hit thanks if helped.
Cheers,
Lunar.
sent from my T.

nemer12 said:
With stock kernel I make 6600 but now 6000/5300 ....its wierd that the values are so " changed " ..
Click to expand...
Click to collapse
lunarjetman1 said:
Yep, I've got 6000 after second run of quadrant test.
Click to expand...
Click to collapse
That may be thermal throttling actuating.

Nope I ve waited am hour phone was cold and made 4000-4500 in qiadrant for like 4 times in a row..also games like real racing 3 are running not so good as before low fps sometimes and lower fps in general..maybe is not optimized

AW: [Q&A Thread][KERNEL][T] DooMKernel {JB}
okay I got a small problem. when I turn my phone off and on again the WiFi is not working, it started working after some minutes, once a router reboot only helped. I think there is something not 100% right.
Gesendet von meinem LT30p mit Tapatalk 2

lunarjetman1 said:
Yep, I've got 6000 after second run of quadrant test.
Hit thanks if helped.
Cheers,
Lunar.
sent from my T.
Click to expand...
Click to collapse
nemer12 said:
Nope I ve waited am hour phone was cold and made 4000-4500 in qiadrant for like 4 times in a row..also games like real racing 3 are running not so good as before low fps sometimes and lower fps in general..maybe is not optimized
Click to expand...
Click to collapse
Well you can check that the cpu has throttled back to either 918Mhz or 1026Mhz...
I think I will remove this kernel level fail-Safe..
cmajetic said:
okay I got a small problem. when I turn my phone off and on again the WiFi is not working, it started working after some minutes, once a router reboot only helped. I think there is something not 100% right.
Gesendet von meinem LT30p mit Tapatalk 2
Click to expand...
Click to collapse
Hmmm thanks for reporting this... Please let us know in detail what cpu speeds and cpu governor were you using when this happened...
Sent from my LT30p using xda app-developers app

AW: [Q&A Thread][KERNEL][T] DooMKernel {JB}
it happened with stock settings and with overclocked to 1728 MHz. ondemand and cfq.
a bit weird, maybe it's just the router that causes this.
Gesendet von meinem LT30p mit Tapatalk 2

DooMLoRD said:
Well you can check that the cpu has throttled back to either 918Mhz or 1026Mhz...
I think I will remove this kernel level fail-Safe..
Click to expand...
Click to collapse
You probably know that these thermal throttling values can be edited in /system/etc/sysmon.cfg, so you could symlink this file to your kernel. But I am writing this, just to be sure.
I've played much with these values and I really don't suggest removing this feature.
S4 cannot even handle continuous 1200MHz in room temperature for longer time and cpu temperature has tendency to go over 80°C. That makes battery temperature to go over 50°C and it's quite high.
Edit:
And I forgot, I had to disable "thermald", because it is somehow involved in thermal throttling too (in JB) and two thermal throttling features in one phone, is too much. Sysmon is enough.

Is there any chance to edit kernel values for display calibration? Would be awesome

Doomlord has posted that if we have trouble changing volatges by using apps we should try adb
I have never done it this way, could anyone with some knowledge post the commands here so that we have a list of commands to change the voltages via adb and a way to restore stock voltages if needed.
Also, a command to set them at boot once we have tested them.
That would be great, thanks

gregbradley said:
Doomlord has posted that if we have trouble changing volatges by using apps we should try adb
I have never done it this way, could anyone with some knowledge post the commands here so that we have a list of commands to change the voltages via adb and a way to restore stock voltages if needed.
Also, a command to set them at boot once we have tested them.
That would be great, thanks
Click to expand...
Click to collapse
Greg i think you missed this:
http://forum.xda-developers.com/showthread.php?p=38599923#post38599923

DooMLoRD said:
Greg i think you missed this:
http://forum.xda-developers.com/showthread.php?p=38599923#post38599923
Click to expand...
Click to collapse
ffs, slap me in the face with a kipper and call me noob!
Thanks for pointing that out and making me look foolish, but I suppose I deserved it...many thanks!

gregbradley said:
ffs, slap me in the face with a kipper and call me noob!
Thanks for pointing that out and making me look foolish, but I suppose I deserved it...many thanks!
Click to expand...
Click to collapse
Greg
U are a NOOB:

DooMLoRD said:
Greg
U are a NOOB:
Click to expand...
Click to collapse
Even though I have seen it before, I shall watch it again and hang my head in shame.!
lol...

AW: [Q&A Thread][KERNEL][T] DooMKernel {JB}
I got no init.d folder in system/etc, should I just create it? is this normal and is init.d still supported or do I have a bug?
Gesendet von meinem LT30p mit Tapatalk 2

cmajetic said:
I got no init.d folder in system/etc, should I just create it? is this normal and is init.d still supported or do I have a bug?
Gesendet von meinem LT30p mit Tapatalk 2
Click to expand...
Click to collapse
u have to manually create that folder incase its not there in the ROM

AW: [Q&A Thread][KERNEL][T] DooMKernel {JB}
DooMLoRD said:
u have to manually create that folder incase its not there in the ROM
Click to expand...
Click to collapse
okay did it, last question: can you please help me with the permissions of the folder that it works? and the scripts should have the same? maybe
rw
r
r
?
or do I need a custom rom for working init.d? I have just stock 489 ftf..
Gesendet von meinem LT30p mit Tapatalk 2

cmajetic said:
okay did it, last question: can you please help me with the permissions of the folder that it works? and the scripts should have the same? maybe
rw
r
r
?
or do I need a custom rom for working init.d? I have just stock 489 ftf..
Gesendet von meinem LT30p mit Tapatalk 2
Click to expand...
Click to collapse
keep permissions rwxrwxrwx (777)
u dont need custom rom for init.d
just create that folder using root explorer or using adb commands as follows:
Code:
[B]adb shell
su
busybox mount -o remount,rw /system
mkdir -p /system/etc/init.d
chmod 777 /system/etc/init.d[/B]
if anyone is still facing issues i will post a small update.zip which can be used to set voltages, this will automatically create the init.d folder...

I don't know if I'm doing something wrong, or there's something weird with my device:
Setting voltages thru incredicontrol, voltage cotrol, antutu, rom toolbox, etc. is ineffective. So I tried using the adb method DoomLord suggested, and while I can succesfully connect an adb shell to the device, ¡it also ignores all voltage settings!.
I can cat /sys/devices/system/cpu/cpu0/cpufreq/vdd_levels, I can echo -25 (or whatever number), but the voltage table stays the same.
¿Does anybody have a hint at what may be the problem?.
EDIT: Nevermind, stupid me, ADB was asking for root permissions, but I never looked at the screen so I didn't see it.
I still don't know why apart from adb commands no other program can change voltages though.

Had many "Error opening a file......" (with SS)

to the point, please someone take a look at my attachment. this's Xperia V.
*last changed i had before :
-updated to .140, and flash vKernel, removed bloatwares, installed init.d via PimpMyRom, use intellidemand gov.

Any chance you could tell us which file and which process/app was trying to open it?

gregbradley said:
Any chance you could tell us which file and which process/app was trying to open it?
Click to expand...
Click to collapse
see attachment,buddy.
thats screenshot i taken from catlog. it something like cant access/open files from interactive gov's folder at /sys/device/system/cpu/cpufreq/

when i take a look at that error (/sys/device/system/cpu/cpufreq), it doesnt have folder named interactive.
i think this path is telling 'what' governor are im using now.
now, i think i resolved my own problem
the problem is that when i change governor besides interactive (default V's governor), that error will appears continuously at catlog.

andrasandhi said:
see attachment,buddy.
thats screenshot i taken from catlog. it something like cant access/open files from interactive gov's folder at /sys/device/system/cpu/cpufreq/
Click to expand...
Click to collapse
The screen shot does not show that, so that doesnt help
andrasandhi said:
when i take a look at that error (/sys/device/system/cpu/cpufreq), it doesnt have folder named interactive.
i think this path is telling 'what' governor are im using now.
now, i think i resolved my own problem
the problem is that when i change governor besides interactive (default V's governor), that error will appears continuously at catlog.
Click to expand...
Click to collapse
OK, its all sorted now then

How are you setting governor?
Looks like that app doesn't have root permissions...
Sent from my LT30p using Tapatalk 2

mpiekp said:
How are you setting governor?
Looks like that app doesn't have root permissions...
Sent from my LT30p using Tapatalk 2
Click to expand...
Click to collapse
Of course i have root.
im using doom's kernel and installed superSU after flashing .140 ftf.
if i dont, i cant change the governor.
take a look again properly this SS (see this post attchmnt), its weird.
i dont have this problem before when i changed governor.
it happen when i change other governors EXCEPT interactive.
for now, that continuously error dissapeared bcoz use interactive gov.

Yes that was my point, the governor is not actually changing, hence the reference to interactive whilst using another governor.
Do you have any init scripts running?
Sent from my LT30p using Tapatalk 2

mpiekp said:
...........the governor is not actually changing, hence the reference to interactive whilst using another governor.
Click to expand...
Click to collapse
oh, really?
now i remember ive installed PimpMyRom before, just to have init.d support.
hmm, i have some script like zipalign and cpu-i/o setting.
im changing gov using SystemTunerPro.

Bet your cpu script is set to intelli.....
Sent from my LT30p using Tapatalk 2

mpiekp said:
Bet your cpu script is set to intelli.....
Sent from my LT30p using Tapatalk 2
Click to expand...
Click to collapse
i win
that script is script created from SystemTunerPro app. so when i change gov from that app, the script will rewrite it automaticaly.
i already removed that script and use SetCPU, it still have same problem.
i can only thinking it happen from kernel related.
maybe the only way i can do is re-install ROM and kernel, but later.
thanks for ur attention, sir :thumbup:

[KERNEL] [CM10.2/PAC-man] Turnip Kernel - XT907/XT905 --> Overclocking Enabled

This is a CM10.2/PACman kernel I compiled.
UPDATE: I have changed the CPU frequency tables to allow 192MHz minimum speed in addition to enabling overclocking.
You can download a CWM/TWRP flashable zip of the kernel from HERE
Feedback welcomed!
http://www.spice.net.au/razrm/Kernel/TurnipKernel-XT-907-v1.0.1-CM10.2-20131020013720-CWM.zip
----- Older -----
The only changes I have made at this point are to enable over clocking.
You can download a CWM/TWRP flashable zip of the kernel from HERE
My device is happy at 1728MHz - Your results may vary.

ecips said:
This is a CM10.2/PACman kernel I compiled.
The only changes I have made at this point are to enable over clocking.
You can download a CWM/TWRP flashable zip of the kernel from HERE
My device is happy at 1728MHz - Your results may vary.
Click to expand...
Click to collapse
What is "CPU min" on your kernel?

thx,bro's.can i use it on stock rom?thx so much

St.Noigel said:
What is "CPU min" on your kernel?
Click to expand...
Click to collapse
384MHz - but I am working on a couple of changes and 192MHz min is one of them.
Cheers

hiro1215 said:
thx,bro's.can i use it on stock rom?thx so much
Click to expand...
Click to collapse
I haven't tried it, but I think it unlikely to work.
Cheers

ecips said:
384MHz - but I am working on a couple of changes and 192MHz min is one of them.
Cheers
Click to expand...
Click to collapse
It will be perfect! Thanx, Sir!

I'm reporting very good battery life with this Kernel. Check out my screen shot!
Sent from my XT907 using xda app-developers app

Do you know if flashing this gets rid of slight lag 4.3 roms have? That's the only reason I've been staying away from them.

New Build
First post updated.

dreamjaeil said:
Do you know if flashing this gets rid of slight lag 4.3 roms have? That's the only reason I've been staying away from them.
Click to expand...
Click to collapse
Curious about this as well.
Sent from my XT907 using Tapatalk 2

MistPhoenix said:
Curious about this as well.
Sent from my XT907 using Tapatalk 2
Click to expand...
Click to collapse
Why don't you give it a try and see??

very happy to see some kernel development for xt907. It needs it. Thanks ecips.

Prob. a noob question but does anyone know if this will work on the AOKP rom?

jb14813 said:
Prob. a noob question but does anyone know if this will work on the AOKP rom?
Click to expand...
Click to collapse
I tried flashing this over liquid smooth and couldn't get it to boot. Boot animation was very choppy and then just froze. Not sure about AOKP though.

Just a note, GPL dictates you must provide kernel source within 80 days of public release. I know we're not at that limit but thought I might say something since I didn't see source linked in the OP.
Sent from my Nexus 4 using Tapatalk

BytecodeMe said:
Just a note, GPL dictates you must provide kernel source within 80 days of public release. I know we're not at that limit but thought I might say something since I didn't see source linked in the OP.
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
If you want the code changes I have made, you could try asking me.
The changes are really quite trivial.

ecips said:
If you want the code changes I have made, you could try asking me.
The changes are really quite trivial.
Click to expand...
Click to collapse
It's not about what I want. GPL is the law. It's possible for you to get in serious legal trouble.
I'm not trying to be a douche, if anything I'm looking out for you...
Sent from my Nexus 4 using Tapatalk

This work for a stock rooted debloated ROM?
Sent from my Galaxy Nexus using Tapatalk

zoomy942 said:
This work for a stock rooted debloated ROM?
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
Strongly doubt it since it's for 4.3
Sent from my Nexus 7 using Tapatalk 4

Will this work on Carbon?
Sent from my XT907 using XDA Premium 4 mobile app