Related
Yesterday my galaxy note got rained on now it says its charging all the time.mtp connected also shows up on notification. if turn the phone off I can't turn out back on again just shows battery charging. The only way to turn back on is hold home power and up boot into cwm then select reboot.If I plug USB in PC it doesn't register so no mounting sdcard.The phone works perfectly but says its charging with nothing plugged in.Is there away to unroot without connecting to PC.
As you say it yesterday I believe you have some light short circuit in the hardware or simply in the usb pins. There light acid in the rain (depending on where you leave) and that makes it a conductor.
Back in the old days what we did was take the phone apart and hair dry. But those where the big-a$s Nokias from late 90-s. This system is more fragile.
Actually you are doing the worst thing that you can do to it right now. That is turning it on and keeping it on. All you should do in my opinion is turn it off, remove battery and leave it in a dry place to dry up (~2 day). And only start using it after that. Every thing should be fine.
P.S: The Galaxy Note is not IP rated, so dont leave it out in the rain and dont take it with you to the shower
The phone only had acouple of spots of rain on it but was enough to cause problems.
However its has now recovered and working fine but be aware that the slightest bit of rain may brake it.
if ever you get an electronic device wet... put it in a container with rice... for at least 48hrs...
it has always worked for me... especially when I buy devices off CList that are water damaged, put them in rice for a week (swap out rice 3x), after i have SIMPLEGREEN'd them, then sell the mobo's for PROFIT on eBay...
thats a more Desi style
Okay, first thing to mention is that I have searched for information on my issue and while I have found (and tried) solutions that approach my goof, I need to post this:
Last night I finished reading from Kindle app, hit the power button to shut off the screen and laid it down. I know I should have plugged it to recharge but too late now. I am running CM nightly from 07172012, so I know I didn't download the nightly CM battery issue versions.
This morning the screen will not light up; I have tried charging it, hard reset with power and home screen buttons for 15-20 seconds (and longer), and nothing works. My concern is that the screen is dead. I connected the touchpad to my laptop and I get the connection sound from the laptop; it sees the TP but does not accept it as a portable storage device. Device Manager lists it as: QHSUSB_DLOAD with driver(s) not loaded.
When I try the volume rocker button I do not hear the small audible ping as volume goes up or down. Of course, with the resets, who knows where I am in the OS (or even if it is WebOS or Android).
I really didn't want to be a noob and post this, but I need some advice from the brethren here on XDA. Thanks in advance.
It seems to me that it's not even booting if your getting that strange device in device manager. Try the webos recovery tool from hp. It may help. Although it will wipe android off.
Sent from my SGH-I777 using xda app-developers app
my son-in-law is in the same boat. Nothing he does wakes it up. I believe there are tp's out there with this hardware issue. I let my tp battery drain completely. It powers down around 4% battery. I place it on the touchstone, it charges backup and boots into moboot, then webos. I've done this twice. no problems. If it's under warranty still, send it in.
If you have a touchstone charger put it on that and leave it for a couple of hours and it Will come back to life.
See this article by Reverend Kyle http://www.reverendkyle.com/index.php/articles/146-hp-touchpad-charging-issues-solution
I hope this helps.
I've had multiple instances of black screen of death failure.
The latest one I had, I was able to restore by using a standard USB to micro USB cable (and recently NOT the HP OEM cable) to connect to the computer I usually use to sync or use HP web doctor with.
Same symtpom as the OP, get the three dings when connecting the touchpad to the computer, no responses and the QHUSB driver load error. HP charger wouldn't chage it, touchstone would not charge it.
Anyhow, I left it connected for a few hours to charge connected to my PC. Then, I disconnected from the PC using the large USB connector and reconnected. Whamo, got to the bootloader.
I believe what happened was I trickle charged the touchpad enough to get the touchpad to boot.
You can try the various hard boot keypresses too, but wait for a few hours while trying to trickle charge the touchpad via the computer USB.
Update
Okay, so I followed the old rule of doing the simple (and/or free) solutions first and then move on.
1) I set the touchpad on the touchstone for several hours yesterday - no luck
2) I connected the touchpad to my pc through the USB and let it charge - no luck
3) I let it be plugged into the standard charging plug all night - no luck
4) I prayed to the great old god Cthulhu - no luck
My only option remaining is to use WebOS Doctor. One question on that: in all the literature I have read thus far (and perhaps I am mistaken), I need to be able to get the TP into USB mode to download the corrections/reboot back into WebOS. Is that right or can I expect that when the doctor sees the mangled mess of an OS through the USB connection, it will know what to do?
Again, as always that for the previous posts and for the support.
mnachazel said:
Okay, so I followed the old rule of doing the simple (and/or free) solutions first and then move on.
1) I set the touchpad on the touchstone for several hours yesterday - no luck
2) I connected the touchpad to my pc through the USB and let it charge - no luck
3) I let it be plugged into the standard charging plug all night - no luck
4) I prayed to the great old god Cthulhu - no luck
My only option remaining is to use WebOS Doctor. One question on that: in all the literature I have read thus far (and perhaps I am mistaken), I need to be able to get the TP into USB mode to download the corrections/reboot back into WebOS. Is that right or can I expect that when the doctor sees the mangled mess of an OS through the USB connection, it will know what to do?
Again, as always that for the previous posts and for the support.
Click to expand...
Click to collapse
Another piece of black magic that worked for me and is worth a try as it is free. Connect Touchpad to standard HP brick charger plugged into power outlet. Unplug cable from charger, count to 5, plug it back in, count to 5, take it back out. Repeat the cycle until you get bored or until you get a red charging symbol. If you get the latter then let it charge up normally and you are back in business. The theory behind this method is that it takes a few seconds on plugging in for the circuits to realise they "shouldn't be charging" and this allows a little bit of charging to take place on each insertion. Repeat enough times and you get enough to kick start the proper charging. In my case about 20 times did the trick.
As I didn't want to get into this situation again I then set up a Tasker process to power down th eTouchpad if the battey charge dropped below 8% and I've been OK since.
RIP Touchpad / EOT
Well, I had to wait a day to get my hands on a WinXP laptop; I upgraded my Dell to Win8 about 3 months ago and WebOS Doctor does not play well with Win8.
While that time passed, the touchpad finally gave up the ghost. There is no power left in the TP. When I run WebOS Doc the laptop cannot see the TP connecting via USB. I also checked by connecting the TB to the Dell, since it would at least see the device. Not any more.
My thanks again to those that responded. I did try the plug in, plug out with 5 second waits between, just in case. You never know. However, after 50+ attempts I had to call it a no-go.
does your home button light come on at all? Are you able to see moboot bootloader at all or are you able to start the tablet in webos recovery mode by holding the vol key while powering it on? are you able to ./adb connect? Also I've never had much luck with the resest method youre using, holding down the power and home key, I always hold down the power key and press the home key 15 times, when I get hard freezes and lockups, it's always worked.
Mine is in the same boat for a couple of months, removed battery and charged. Boot loader is borked I get only get a qualcomm usb device but nothing thats of any use for webos doctor or qualcomm tools. We'll have to wait until someone figures out jtag or how to replace the bootloader with qualcomm tools. I'm amazed with the number of touchpads out there that something hasn't leaked from hp to fix it. Anyone got friend in hp or qualcomm :angel:
OP Update
Well, I thought this was a dead issue but here is the latest.
After wallowing it a pit of despair the likes of which can only be described as wretched, (I even coveted my wife's TP up close, almost giving into temptation and swapping decals to reverse ownership) I looked outside of XDA and did general Google searches and happened upon this site:
http://forums.webosnation.com/hp-touchpad/299256-dead-touchpad.html
After reading a bit I realized that the touchstone may be able to recharge the dead battery even though fully drained. I began the quest that Friday morning the 24th of August, after verifying that my Dell laptop did not see the TP when plugged in via the USB cable.
I just did a quick check and the laptop now "sees" the TP when connected. Still no luck on booting into Moboot or the USB icon screen - neither Power and Volume Up or Power and Home buttons achieve anything. But I am glad to see that the touchstone has placed enough charge into the battery that the laptop is aware of the TP when connected.
I believe that given a few more days on the touchstone I should be able to boot into moboot.
@ haxin - I have nothing. Not a single light from the Home button - my only evidence that there is SOMETHING going on is when I connect the TP to the laptop and get my connection "sound". Again, I have high hopes that the touchstone will get me where I am going, albeit at a snails pace.
@ paddy - Yeah, I hope that when (if) I get to a lit screen, I am able to move past where you are at. My big concern is that I am toast even with a semi charged or fully charged battery from the touchstone.
I will update later on. Again, thanks to all for the input and probing questions. You have made me think harder and work a bit longer on this project.
OP Update - 31 August
After 7 days on the touchstone, the touchpad is currently showing the low battery charge icon; I have now plugged it into the A/C adapter.
Each morning I have picked up the TP, held down the power button and held the home button for 15+ seconds. Today it worked, turning on the screen for the first time in a week and letting me see the low battery image.
In my quest to resolve this issue, I have read so many variations on what buttons to hold and how long to hold them that after awhile you end up considering the possibility that SOME of the button options are not correct. That the operator has booted their TP up, but they misconstrued the actual solution; how else can you explain the idea that HP built so many different button combinations and hold times to boot a TP from a nearly or fully dead battery state?
Anyway, I will continue to post updates until my beloved TP is back to running CM9.
And to all those who gave their TP up because the battery got too low; find a touchstone or other "trickle" charger solution, connect and let it sit for a week or so.
Thanks!
Glad the Touchstone worked for you , don't know why it has taken so long to charge but when your up an running properly Llama is a good app to install as
A:You can set alarms for when the battery gets to a certain level/levels
B:Have it shut down when the battery gets to a certain level.
I use 20% for an alarm and 10% to shut down which allows me to sleep easy and not worry if someone else is using it . .
I am up and running. I most definitely will load that app on my TP, plus my wife's and a coworker who bought a TP because of mine.
I don't know either why it took so long; I am just glad it worked and I have it back. I am on it right now.
Thanks again to all who provided feedback and guidance. This is why I love XDA.
Sent from my HP Touchpad using xda app-developers app
HP Touchpad sleeping and will not turn on
Just a note to those HP tablet owners who experience the Black screen of death or sleep of death.
I am the proud owner of 4 HP tablets and two of them so far have had the black screen of death. I have read forum after forum trying to get answers to this problem. There was only one posting that has made cense to me. Someone posted that the tablets symptoms are very much like when the Phones use to go to sleep. The solution was to disconnect the battery for a few minutes then plug it back in. Then simply hit the hold the power button down to turn on the tablet.
The problem is taking the TP apart. There is a video on youtube on how to disassemble the tp. It is a little annoying that you have to go to such lengths to reset the hardware but HP will charge you 250 dollars to fix the problem. After you watch the video on how to open the TP, remove the 3 little screws holding the battery. Now slowly pry the battery up, they use double sided tape to hold it in place along with the screws. Wiggle the battery side to side and try to disconnect the battery connector. This can be done without removing the boards in the TP. Wait 1 min then try to replace the connector in the socket. It is on the underside of a board so when you have it in place use something to make sure it is tight. Plug the charger in to the USB cable. Without closing up the unit hold the tablet power button in until you get the battery charging symbol on the display. Let the unit charge while it is still disassembled. Just in case you have a problem. Once everything is operating disconnect to charger and replace the battery screws, now snap everything together.
This was the only way I was able to fix two of my four TP's. I am sure I will have to do this again because my kids always let the tablets go dead and they don't pay attention when placing them on the Stone for charging. If the tablet is not properly placed on the stone the tablet will not charge.
Hope this helps.
This by far is the best tablet for the money anywhere.
msousa1 said:
Just a note to those HP tablet owners who experience the Black screen of death or sleep of death.
The solution was to disconnect the battery for a few minutes then plug it back in. Then simply hit the hold the power button down to turn on the tablet.
The problem is taking the TP apart. There is a video on youtube on how to disassemble the tp. It is a little annoying that you have to go to such lengths to reset the hardware but HP will charge you 250 dollars to fix the problem. After you watch the video on how to open the TP, remove the 3 little screws holding the battery. Now slowly pry the battery up, they use double sided tape to hold it in place along with the screws. Wiggle the battery side to side and try to disconnect the battery connector.
Click to expand...
Click to collapse
I realise this is an old thread, but I recently had a reoccurrence of the black screen of death issue and thought given the number of touchpads still out in the wild, I would share my experience on the off-chance it may help somebody.
My first experience of the black screen issue was a few months after having my touchpad (many years ago). The screen just went black and no combination of holding the reset keys for any period of time would restart the unit. I had suffered lock-ups before and found the reset combination to be successful, but this time none of that worked and I had effectively what appeared to be a dead unit.
Having contacted HP, I returned the unit under warranty and a unit was returned working. I say “a unit” as I was never quite sure if it was the same unit or a refurbed unit, but to be honest given the speed the units went out of stock during the fire sale, I was just glad to have a working unit again.
Well this week after several years of use including the installation of Android, the black screen occurred again. As before, no combination of the keys / holding for a period of time / pressing them a number of times etc had any effect. The unit was three quarters charged and I was using it up till the point the screen went black. :crying:
Given that the unit has no warranty and it was “dead” anyway, I decided to take it apart. Despite watching YouTube videos, this appeared to be more troublesome than I thought, but eventually I was in. Interestingly, the backlight on the screen was still lit, suggesting the unit was still powered. I did consider disconnecting the battery, having removed the screws as per the previous poster, but mine seemed to be well and truly stuck down and I felt I may damage it prying it away from the base.
However, looking around inside the unit, I spotted what was clearly a surface mounted switch that faced upwards towards the back of the screen. Out of interest, I pressed on this switch with my finger nail and my unit powered off (shown by the backlight turning off). I then pressed the normal power switch and the unit powered up as normal. I have attached a photo of the switch which resides close to the popout tab with serial numbers on that can be found on the right hand side of the unit.
It does appear strange that HP put this “reset” button inside the unit, facing inwards rather than outwards where a small hole in the back of the case could be used to press it. So if you do get to the opening the case stage, consider this as an alternative to prying the battery loose. Also if somebody can work out a way to make the button accessible from outside the case it might be a useful modification.
JoeG90 said:
<.......................................>
However, looking around inside the unit, I spotted what was clearly a surface mounted switch that faced upwards towards the back of the screen. Out of interest, I pressed on this switch with my finger nail and my unit powered off (shown by the backlight turning off). I then pressed the normal power switch and the unit powered up as normal. I have attached a photo of the switch which resides close to the popout tab with serial numbers on that can be found on the right hand side of the unit.
It does appear strange that HP put this “reset” button inside the unit, facing inwards rather than outwards where a small hole in the back of the case could be used to press it. So if you do get to the opening the case stage, consider this as an alternative to prying the battery loose. Also if somebody can work out a way to make the button accessible from outside the case it might be a useful modification.
Click to expand...
Click to collapse
Oh I was so keen when I came across this post. A Reset Button! How great would that be?
Tried it, unfortunately it did not resurrect my dead as a doorstop TP. I was so hoping...
I just put a 'new' EBay battery in it a couple of days ago and tried trickle charging with a 1000mA charger for 24hrs. No joy there either.
All I get when I plug it into the PC is that it shows up as a "QDLoader 9008" (QHSUB_DLOAD driver) .
No flicker of life or light whats so ever...
_mr
middle_road said:
Oh I was so keen when I came across this post. A Reset Button! How great would that be?
Tried it, unfortunately it did not resurrect my dead as a doorstop TP. I was so hoping...
I just put a 'new' EBay battery in it a couple of days ago and tried trickle charging with a 1000mA charger for 24hrs. No joy there either.
All I get when I plug it into the PC is that it shows up as a "QDLoader 9008" (QHSUB_DLOAD driver) .
No flicker of life or light whats so ever...
_mr
Click to expand...
Click to collapse
Try to borrow a Touchstone conductive charger if you can. It's the only thing that has worked for me when it has totally drained down.
All the best.
sstar said:
Try to borrow a Touchstone conductive charger if you can. It's the only thing that has worked for me when it has totally drained down.
All the best.
Click to expand...
Click to collapse
That's what I was thinking - no joy there either... It is not even showing signs of getting the least bit warm.
I keep thinking and hoping that there is some way to resurrect this one but I may be wrong...
It's currently trickling on a 1000mA charger. Tomorrow I'm going to try the Touchstone behind it.
If that doesn't start something then I'm going to yank the new battery and along with the old battery charge them like an RC device.
(if I can ascertain the proper way to do that --- )
_mr
After several days on the trickle, still no life.
Took it apart at lunch and with the battery still connected to mobo it is showing 3.1V across the red/black. So I figure the battery
is good. Looks like the mobo is gone.
Not sure what else to try.
_mr
I've seen several threads about this in the past month on other websites with no solutions so it seems to be a common issue.
The problem I'm having is that after not using my gear for a few days it refuses to charge or turn on. Not even a flicker when the charger is attached. Tried two different cords. Pins are clean and lined up. Left it plugged in overnight several times. Anyone else having or had this issue? Thanks
I don't have an answer for the problem at hand but I would like to stay updated with this thread. I'm looking into getting one very soon.
53N7 FR0M M4 N073-3 V1A 7A9A7A7K
Had not heard of issue before. Did you try holding down power button for 10secs+?
Brendo said:
Had not heard of issue before. Did you try holding down power button for 10secs+?
Click to expand...
Click to collapse
Yes but since the unit is completely dead it has no effect
Here are some other threads where users are having the same issue:
http://forums.androidcentral.com/samsung-galaxy-gear-smartwatch/345647-gear-wont-power-charge.html
http://forums.androidcentral.com/sa...watch/348248-gear-watch-wont-charge-turn.html
http://forums.androidcentral.com/sa...watch/323132-galaxy-gear-will-not-charge.html
After trying a third cord for a Samsung blue tooth headset I finally got the gear to show it is charging and states 60% battery. Very strange. Tried turning it on and resetting it several times beforehand too so even though it had charge it was temporarily bricked. Hope this doesn't happen again
I had an similar experience the other day, the clock wouldn't start/charge or react to the power button. After i repeatedly tried to hold the powerbutton i finally rebooted. I suspect the gear was actually on, but that the system froze. Was about to do the surgery to remove the battery to check when it booted up
sent from my carrier pidgeon
I recently had this issue with one of my gear.this problem comes when you leave you watch on and battery drains and you don't charge for couple of weeks.I think it has something to do motherboard.only way to fix this is to replace battery which has juice in it.that's how I got mine working.I replaced the battery from my working watch and it started working and the dead battery I took out put in my other watch also started charging and working.this is a factory defect and Samsung should replace it free lifetime of watch instead of one year.
FIX
bladerealm124 said:
I've seen several threads about this in the past month on other websites with no solutions so it seems to be a common issue.
The problem I'm having is that after not using my gear for a few days it refuses to charge or turn on. Not even a flicker when the charger is attached. Tried two different cords. Pins are clean and lined up. Left it plugged in overnight several times. Anyone else having or had this issue? Thanks
Click to expand...
Click to collapse
I found that if you take the Galaxy Gear apart and disconnect the power from the motherboard then plug back in and put the gear back together has got them to turn back on almost every time just give it a charge for a few minutes. This will fix it as long as the issue was not due to rooting to trying to put a custom ROM on the Gear. There is a few videos on YouTube that can help you take it apart.
- I work for Samsung experience shop and i have run into this issue often and just about every time this has fixed it.
- sorry for late response hope your back in the business with the Gear.
I've had this issue with wall chargers and did some reading online. Someone suggested to plug it into a computer/laptop usb port.
I plugged it into the laptop and walked away and guess what? It's charging. I tried many different chargers varying in ratings but nothing worked
Try leaving it plugged into the pc for a good while. After two days of trying various chargers, my gear is back up and running
Had this issue as well. I tried a series of taps to the power button followed by a hold and it eventually turned on and has been working fine since.
tap - hold
tap tap - hold
tap tap tap - hold
eventually it will come on, i cant remember how many taps it was when it finally reset.
Hi had this issue also spent 3 hours trying to figure it out as had just got gear out of its box at very first plugging charger in a quick image appeared on screen then off after that nothing. Eventually being as carefully as possible while gear was in charging dock still plugged in i opened the lid not once did i move gear off contacts but did give sight wiggle then it came to life appears to me its a docking problem of some sort. of course I DON'T RECOMMEND opening lid while charging but thought id pass on what i figured out do at your own risk, I hope this helps others with this issue
Thanx
robfarley772 said:
I found that if you take the Galaxy Gear apart and disconnect the power from the motherboard then plug back in and put the gear back together has got them to turn back on almost every time just give it a charge for a few minutes. This will fix it as long as the issue was not due to rooting to trying to put a custom ROM on the Gear. There is a few videos on YouTube that can help you take it apart.
- I work for Samsung experience shop and i have run into this issue often and just about every time this has fixed it.
- sorry for late response hope your back in the business with the Gear.
Click to expand...
Click to collapse
I was suffering from this issue for days.. Finally made it.. Thank you buddy... Now working like charm!
Gear Watch Charging FIXED!
Thanks to this thread I am very happy!
Just bought a 2nd hand Gear Watch at auction. No idea about how they work and wondered why it wouldn't switch on or respond when charging. Just a black screen regardless of which charger or cable was connected. Read above about disconnecting the power from the motherboard so watched this youtube video on tear down ( won't let me post the full link but this is the video number... v=5WzGC0786U0 )
Luckily had a small 'star' toolset available. Pulled the watch apart... disconnected the power...reconnected the power...reassembled the watch... plugged into the charger and voila! Instantly showed up on the screen with an orange timer and then went black (held my breath) then came on with the battery symbol with 0% charge. Looking at it as I write...touched the screen and now has 10% charge (only been about 5 minutes).
Looking forward to playing with it when fully charged Thank you to the contributors to this thread. I thought I'd been ripped off...but now it seems I'm the one who has scored a working Gear Watch for £20 )))
mine started working on its own... strangely enough.
taking the advice from this thread, i looked into alternate ways to get my Galaxy Gear up and running. I tried cleaning the metal tabs that connect, tried opening the holster while it was plugged in, nothing. i didn't have a star kit to take it apart, so i left it on the charger while i could go find one. thing is, i completely forgot about it, since i've got the Gear 2 for my S5. i was cleaning around my desk and bumped into the gear which fell over and showed that it was at 100% charged capacity. beforehand, it was completely dead, despite the fact that i left it on the charger for a solid 24 hours and no response. maybe it just needed a little more time on there, who knows. but i powered it on, and it's fully functioning. the only drawback is that it needs a factory reset since it was without power for so long. i could connect it as an accessory to my S5, but i couldn't use it in the place of my Gear 2 as it's been rooted/running a _null ROM, and the Gear Manager software has been updated a few times. i'm going to factory reset it and pair it with my Note 3, and see if _null has an updated version of his ROM out there. but i figured i'd let someone know my experience in case it might help in some way.
Fixed it !
terryzzz said:
Thanks to this thread I am very happy!
Just bought a 2nd hand Gear Watch at auction. No idea about how they work and wondered why it wouldn't switch on or respond when charging. Just a black screen regardless of which charger or cable was connected. Read above about disconnecting the power from the motherboard so watched this youtube video on tear down ( won't let me post the full link but this is the video number... v=5WzGC0786U0 )
Luckily had a small 'star' toolset available. Pulled the watch apart... disconnected the power...reconnected the power...reassembled the watch... plugged into the charger and voila! Instantly showed up on the screen with an orange timer and then went black (held my breath) then came on with the battery symbol with 0% charge. Looking at it as I write...touched the screen and now has 10% charge (only been about 5 minutes).
Looking forward to playing with it when fully charged Thank you to the contributors to this thread. I thought I'd been ripped off...but now it seems I'm the one who has scored a working Gear Watch for £20 )))
Click to expand...
Click to collapse
Just to share my experience, I left my gear about 2 months discharged, today I tried to charge it and nothing. I tried everything, clean, connect, disconnect etc, so, I pulled the watch apart and disconnected the power etc and everything is working fine now, charging as usual.
Here's what worked for me
I read on another site to try a piece of paper folded and put next to the on button so when the charging cradle is snapped closed it pushes it down. I just tried it and after many days of a dead gear watch....ta da! Success. Now it's on and charging. Take the paper out once it starts to reboot otherwise it will just cycle over and over. Hope this helps someone else. It's tricky to fit just right...i folded a tiny piece of post it note ...good luck. Penelope
ph00ny said:
I've had this issue with wall chargers and did some reading online. Someone suggested to plug it into a computer/laptop usb port.
I plugged it into the laptop and walked away and guess what? It's charging. I tried many different chargers varying in ratings but nothing worked
Try leaving it plugged into the pc for a good while. After two days of trying various chargers, my gear is back up and running
Click to expand...
Click to collapse
I had the same problem: the gear is dead and not charging with a wall charger after leaving the gear for more than 1 month unused. I followed ph00ny's advice and tried to charge it via usb and it immediately started to charge. So before taking it apart I suggest try it out with usb charger.
Cheers
Stopped my gear update by shutting off my phone and now gear wont power on
I have been trying everything to get it to turn on.... (holding down the power button, tap and hold, charging with USB) nothing is working. Don't have a star driver to open it up, but may have to invest in one.
Anyone have the same issue? This is driving me crazy!
Galaxy gear charging
itisagoodname said:
Had this issue as well. I tried a series of taps to the power button followed by a hold and it eventually turned on and has been working fine since.
tap - hold
tap tap - hold
tap tap tap - hold
eventually it will come on, i cant remember how many taps it was when it finally reset.
Click to expand...
Click to collapse
Bingooooooo, It's paradoxal All you have to do when the battery is left drained for a couple of days is to start charging on a Laptop or a desktop with a s4 usb cord for about 10 mn then you continue charge if you like with à wall charger
Regards
tarhounir said:
Bingooooooo, It's paradoxal All you have to do when the battery is left drained for a couple of days is to start charging on a Laptop or a desktop with a s4 usb cord for about 10 mn then you continue charge if you like with à wall charger
Regards
Click to expand...
Click to collapse
Oddly enough this is nothing but the truth. Funny enough. I lost my charger dock thingamajig recently and not one hour ago i started making my own out of a 2x4, and a few bits laying around. Was sad to see gear wouldnt charge or boot. tried different chargers and nothing. I read everything and saw this and didnt think to try as im only running two wires to charge my gear, as those with homemade chargers know. Plugged it into a laptop and boom. charging... please someone explain to me the theory behind this. and dont say the current as i even tried 500ma and 250ma chargers to no avail. how does a pc usb magically do it without data lines connected.... so confused..
The tablet is dead, it was suddenly. Won't charge or turn on and it's not recognised by the PC. Recovery mode (power button + volume-) doesn't work either.
I know that is not the screen, because the PC doesn't detect the tablet at all. I tried with another battery (my wife has the same tablet), but I had no luck. I also know that the charger and the usb cable are fine.
What else I can do, any ideas or suggestions?
maloyztor said:
The tablet is dead, it was suddenly. Won't charge or turn on and it's not recognised by the PC. Recovery mode (power button + volume-) doesn't work either.
I know that is not the screen, because the PC doesn't detect the tablet at all. I tried with another battery (my wife has the same tablet), but I had no luck. I also know that the charger and the usb cable are fine.
What else I can do, any ideas or suggestions?
Click to expand...
Click to collapse
Are you using the OE usb cable? Have you tried charging using the OE wallwart?
TonyStark said:
Are you using the OE usb cable? Have you tried charging using the OE wallwart?
Click to expand...
Click to collapse
Yes, I'm using the OE usb cables (I have 2) and the OE charger.
maloyztor said:
The tablet is dead, it was suddenly. Won't charge or turn on and it's not recognised by the PC. Recovery mode (power button + volume-) doesn't work either.
I know that is not the screen, because the PC doesn't detect the tablet at all. I tried with another battery (my wife has the same tablet), but I had no luck. I also know that the charger and the usb cable are fine.
What else I can do, any ideas or suggestions?
Click to expand...
Click to collapse
I had the same symptoms after disconnecting and reconnecting battery,I hed to disconnect it for like an hour and then three times try to power on the tablet and it did power on. Maybe your battery is dead so after another hour you may try to use the other battery. If it will work, try to connect the batteries together so the dead one can get a little charge (but do some research I am not sure if it won't have a chance to damage anything) then the same after an hour connect try power on and if it powers on immediately give it a charge.
Mis012 said:
I had the same symptoms after disconnecting and reconnecting battery,I had to disconnect it for like an hour and then three times try to power on the tablet and it did power on. Maybe your battery is dead so after another hour you may try to use the other battery. If it will work, try to connect the batteries together so the dead one can get a little charge (but do some research I am not sure if it won't have a chance to damage anything) then the same after an hour connect try power on and if it powers on immediately give it a charge.
Click to expand...
Click to collapse
Just wondered if you had tried this and if so, how you got on? Asking because I bought my daughter one off ebay and it was working fine when I got it, am sure I recharged it once , she played it and then again in morning and thinks she played it till battery ran out. I have since tried charging via pc and mains power, and have disconnected battery twice (case was v. easy to remove so concerned this fault may be reason it was sold), but cannot get a flicker of a response on screen. i got my daughter this as she was desperate for an android tablet for mods for minecraft as I had bought her a Amazon Fire 7 and from what I could see just after xmas, it wasnt possible to root it or sideload at that time, and she said Amazon had no mods compared to the play store and she had been ecstatic with the mods she had found for her android for the short time she had it. I do know when I plug it into the wall charger that the motherboard area gets warm if its been plugged in for a while? Bit of a noob on this stuff,and off sick with probs with my nervous system so my concentration and memory can be a pia. Anyway I was wondering how I can find out if its goosed or what I can try? One of the batterys advertised on ebay is about £50 which seems steep to me, esp. if it doesnt fix it, and esp since I have been unable to work for a few years cos of this illness. I only bought the tablets cos I had extra money after I finally applied and got pip, and got it backdated. Any recommendations for a reasonably priced option for her for her minecraft? Should I go the tablet\notebook type route or can they not handle minecraft? Bit confused by these new notebooks esp touchscreen ones as new ones seem to have small amounts of ram yet are v. popular.
Thanks for advice\thoughts\feedback and let me know if I should start ,y own thread...I only jumped on this to see how he got on and then as I do nowadays with this illness, I then jumped from topic to topic that jumped into my head x sorry x
nikkiandmidgets said:
Just wondered if you had tried this and if so, how you got on? Asking because I bought my daughter one off ebay and it was working fine when I got it, am sure I recharged it once , she played it and then again in morning and thinks she played it till battery ran out. I have since tried charging via pc and mains power, and have disconnected battery twice (case was v. easy to remove so concerned this fault may be reason it was sold), but cannot get a flicker of a response on screen. i got my daughter this as she was desperate for an android tablet for mods for minecraft as I had bought her a Amazon Fire 7 and from what I could see just after xmas, it wasnt possible to root it or sideload at that time, and she said Amazon had no mods compared to the play store and she had been ecstatic with the mods she had found for her android for the short time she had it. I do know when I plug it into the wall charger that the motherboard area gets warm if its been plugged in for a while? Bit of a noob on this stuff,and off sick with probs with my nervous system so my concentration and memory can be a pia. Anyway I was wondering how I can find out if its goosed or what I can try? One of the batterys advertised on ebay is about £50 which seems steep to me, esp. if it doesnt fix it, and esp since I have been unable to work for a few years cos of this illness. I only bought the tablets cos I had extra money after I finally applied and got pip, and got it backdated. Any recommendations for a reasonably priced option for her for her minecraft? Should I go the tablet\notebook type route or can they not handle minecraft? Bit confused by these new notebooks esp touchscreen ones as new ones seem to have small amounts of ram yet are v. popular.
Thanks for advice\thoughts\feedback and let me know if I should start ,y own thread...I only jumped on this to see how he got on and then as I do nowadays with this illness, I then jumped from topic to topic that jumped into my head x sorry x
Click to expand...
Click to collapse
Firt I would try to trickle charge the battery.
BEFORE YOU DO THIS:
Remove the SD CARD. I forgot to do this and snapped my card straight in half removing the back cover.
This started happening to my ME176 as well but of course not until after I retired it and gave it to my mom.
I would start by letting it sit on the charger for about 30 minutes (since we don't know the current charge state and if the overcharge block is functioning). This will give it a slight charge if dead.
Disconnect charger and remove the back cover and disconnect the battery (as posted earlier). Push and hold the power button a few times even though there is no power.
It may take a few tries of disconnecting and reconnecting the battery before it decides to power up, so keep the cover off while doing this.
Hi
I’m wondering if anybody has any advice regarding my problem. I have looked here and tried what has been suggested.
My stock, never rooted, never flashed, Xperia T (think it was Android 4.3 but can’t now check, the latest Sony rolled out) was working fine until yesterday. I was on a plane and noticed it had 20% battery life left so I plugged it into the onboard USB port. The problem is I think I hay have plugged the cable into the port the work way round – not the connection on the phone, but the actual USB socket. This should be impossible but somebody obviously had broken the port and it turned out the cable could be plugged in both ways! (I don’t know if it was plugged in the wrong way round but is the only thing that could possible explain the sudden death.)
Could this have bricked it? I suddenly couldn’t get a red light to show charging and holding down power on and volume up or down does nothing. I tried charging overnight via a wall socket when I got home but the result is still the same. Just a black screen and no sign of life. I have also tried plugging it into a computer with Sony’s PC Companion but as the phone is not ‘on’, it can’t be found.
Does anybody have any advice where to go from here? I’m more concerned about some recent data from holiday on the phone than the actual handset itself. If the phone is dead, is there any way to read the internal memory?
Thanks
Try this: Unplug the charger, press the power button. The phone won’t power up because there is no charge left in the battery. But press the power button along and while doing so, connect the charger without releasing the button. Now, you will probably see the red light. Please don’t take off your finger from the power button for around 1 to 2 minutes when the red light for charging will glow continuously. If you feel tired holding it, you can try sticking a tape on it in it’s pressed mode. Once you are sure that the phone is now charging the battery again(red light keeps glowing even after the power button is released) kindly wait for 5 to 10 minutes or may be more before you press the power button again to power the phone up. Now the phone will be up and running
If that doesnt work maybe ur battery is dead or usb port broken
Thanks for the advice. I gave that a go after trying a 24h wall charge and not touching it (which did nothing).
So, I held the power down, plugged it in but nothing. I held it down for around 5 minutes both manually and then repeated the process using the rubber band trick to keep the button held down but no red light ever came on. I think I’m going to try a new battery as I genuinely see that I have nothing to lose as I doubt it will be possible for anybody to recovery data given as the phone can’t be switched on so if I break it further I’m in no worse position!
Thanks again for trying to help though!:good:
When I got my xperia t it was in described condition. I also tried everything (rubberband trick and so on) but the only thing working was to open it and pull and put in again the plug of the battery. After that it booted immediately and I got this sleep-of-death-thing nearly every day... Since I soldered the battery as described in this Topic it happens only ~once a week. Good luck!
SOLVED! In preparation for the new battery arriving, I decided to take the back cover off. I unhooked the top battery connector and decided to connect it back up again, just to see if it did anything. Plugged in the charger and a red light came on straight away! I let it charge for a good couple of hours and switched it on – not as easy without the case attached – and it worked. I’m so frustrated with it being such a simple issue as needing to disconnect the battery but even more frustrated with the design that it is meant to be a ‘sealed’ unit with a non-removable battery. I used to often need to disconnect my old Omnia II battery to restart it but that was a simple case of cover off, remove battery, replace battery , put cover back on, not the creaky, back cover fear of cracking exercise of yesterday. Still it’s working now and hopefully life in the old phone yet!
Isodrac said:
SOLVED! In preparation for the new battery arriving, I decided to take the back cover off. I unhooked the top battery connector and decided to connect it back up again, just to see if it did anything. Plugged in the charger and a red light came on straight away! I let it charge for a good couple of hours and switched it on – not as easy without the case attached – and it worked. I’m so frustrated with it being such a simple issue as needing to disconnect the battery but even more frustrated with the design that it is meant to be a ‘sealed’ unit with a non-removable battery. I used to often need to disconnect my old Omnia II battery to restart it but that was a simple case of cover off, remove battery, replace battery , put cover back on, not the creaky, back cover fear of cracking exercise of yesterday. Still it’s working now and hopefully life in the old phone yet!
Click to expand...
Click to collapse
Nice to see that bro!