Hello, I have a small problem with my XZ. It's currently running 4.2.2 with build number 10.3.A.0.423.
The issue I'm facing with, is that when I am in a call and someone else calls me there is no warning sound that another person is calling me. The reject or answer call appears but there is no actual sound to announce that another person is calling me.
I have tried without any luck the following:
- checked/unchecked the call waiting option = it didn't work, if the option is unchecked than the person that tries to call me while I am on call with someone else gets a busy line, so in this case the option works as expected
- used pc companion to restore 4.2.2 as I thought that maybe some app i installed messed up this option = this also didn't work as after the fresh restore there was still no sound while I was in call with another person while someone else called me
So my question is that is this a bug of 4.2.2, does anyone else know of this issue? I goggled this problem without any luck in finding an answer.
Any suggestions or ideas?
Nice to see that the thread got 94 views but no reply. Am I the only one with this problem?
Can someone with the same firmware as mine test the behavior described by me? That way I could find out if it's a 4.2.2 bug or another issue.
Related
Hello,
Sometimes I receive calls with unknown caller-id's but I hear one ring and than it is gone.
When I asked someone to make his number invisible, before calling me, the ' unknown-caller ' get my voicemail.
I tried everything to deblock unknown caller-id's but can't find a solution for this problem, only find options to block unknown callers.
Does anyone have the trick for me to do this?
Thanks in advance.
note:
My Nexes One is rooted and flashed with the latest version ROM of CM7.
It must be a problem with the telephone because when I put the simcard in another one the problem is over.
I hope someone can help me.
I have in call sound problems.
When I reboot I can sometimes place one call without problems for as long as I want.
Other calls after that I have no sound, can't hear the call tone and other parties can't hear me.
Also incoming calls, i hear the phone ring but when i answer the other party can't hear me and i can't hear the other party.
The settings for sounds in the accessibility menu and noise reduction etc were off and stayed off. (other forum tips)
I also tried numerous factory resets with no avail
Can someone give me a hint how to fix it?
I have stock 4.2.2 International version of the S4 Active.
Baseband I9295XXUBMK2
Build JDQ39.I9295XXUBMK2
Kernel 3.4.0-2015525
Headset
I tried a different option. I can call with my bluetooth headset.
When i switch to speaker the in call sound drops. giong back to headset will not activate in call sound.
Same Here
The same happens to me. Only the bluetooth option works every time. I have tried several firmware and kernel versions and nothing has changed.
There is a workaround that I could find but it is totally impractical: http://forum.xda-developers.com/showthread.php?t=2371034
In forums for models / ROMs with a lot more users than this one (Nexus / CM) people with 4.2.2-based firmware versions there are many posts describing what could seems to be the exact same problem, which they have been able to fix via baseband updates or custom patches, but that does not really seems to be an option for the S4 Active...
mobieletelefoons said:
I have in call sound problems.
When I reboot I can sometimes place one call without problems for as long as I want.
Other calls after that I have no sound, can't hear the call tone and other parties can't hear me.
Also incoming calls, i hear the phone ring but when i answer the other party can't hear me and i can't hear the other party.
The settings for sounds in the accessibility menu and noise reduction etc were off and stayed off. (other forum tips)
I also tried numerous factory resets with no avail
Can someone give me a hint how to fix it?
I have stock 4.2.2 International version of the S4 Active.
Baseband I9295XXUBMK2
Build JDQ39.I9295XXUBMK2
Kernel 3.4.0-2015525
Click to expand...
Click to collapse
I to have the same problem but im on a I537! This is the second replacement device from ATT! Have noticed i can call out fine when someone calls no audio nor can they hear me,call back and it works fine.Also have noticed when a call is incoming or outgoing LTE will switch to 4G. My 1st I537 never did this!
davenger1 said:
I to have the same problem but im on a I537! This is the second replacement device from ATT! Have noticed i can call out fine when someone calls no audio nor can they hear me,call back and it works fine.Also have noticed when a call is incoming or outgoing LTE will switch to 4G. My 1st I537 never did this!
Click to expand...
Click to collapse
Same problem with my SGS4A. I was on i9295XXUBMK2, tried to update using the phone update option, which rendered my phone unusable. Flashed new stock ROM i9295XXUBMK3, now I can use the phone, although sound problem persists.
Making a call: reboot, call
Receiving a call: answer, hang-up, reboot, call back
Anyone with 4.3 that has this problem on SGS3, SGS4 or SGS4A?
Edit 21.8.2014
I had the speaker changed last week and so far no problems. I am slowly getting confident that I can rely on S4A as a phone also, not just tiny surf tablet.
I have same phone, never got this pb. However I got some SD card issues after updating to KitKat...
Partial solution... for me at least
Hi guys ,
having same issue, disabling 4G option solves my problem. But it-s impractic cause I want to use the 4g... in a huawei phone I solved same issue by disabling an option of "mobile data always on"
Don't know how it's related...
Same issue for me. I made lots of research with no results. Nobody knows...
same problem here with no solution yet
mobieletelefoons said:
I have in call sound problems.
When I reboot I can sometimes place one call without problems for as long as I want.
Other calls after that I have no sound, can't hear the call tone and other parties can't hear me.
Also incoming calls, i hear the phone ring but when i answer the other party can't hear me and i can't hear the other party.
The settings for sounds in the accessibility menu and noise reduction etc were off and stayed off. (other forum tips)
I also tried numerous factory resets with no avail
Can someone give me a hint how to fix it?
I have stock 4.2.2 International version of the S4 Active.
Baseband I9295XXUBMK2
Build JDQ39.I9295XXUBMK2
Kernel 3.4.0-2015525
Click to expand...
Click to collapse
same problem with in call and out call .... searched a lot about solution and no solution yet
I had a similar issue with bluetooth calls. First call would be fine, but after that I couldn't hear the other person on the line and they couldn't hear me. It turned out to be some kind of incompatibility with the Google "OK Google" detection with Galaxy S4-based phones. If I disabled it from detecting "From any screen", this seemed to correct the problem. However the setting might return on application updates. I would recommend trying that and see if it makes a difference. If it's not that, then I don't really know how to help you. I moved on from that phone over a year ago and have been happier ever since.
I've experienced a couple of problems recently and I'm not sure if it's a bug or something they changed with the last update. I'm on 4.4.2 with Sprint.
Previously, when I tried to call a business (i.e. "Call Pizza Hut"), it would find it via Google Now and make the call. Recently, I've noticed that if the business is not listed in my contacts, it will try to call one of my contacts.
Also, if there's a contact with more than one phone number, it used to give you a prompt to confirm whichever number you're trying to call. Now, it just calls the default number.
Has anyone else noticed this and do you know of a fix?
clankfu said:
I've experienced a couple of problems recently and I'm not sure if it's a bug or something they changed with the last update. I'm on 4.4.2 with Sprint.
Previously, when I tried to call a business (i.e. "Call Pizza Hut"), it would find it via Google Now and make the call. Recently, I've noticed that if the business is not listed in my contacts, it will try to call one of my contacts.
Also, if there's a contact with more than one phone number, it used to give you a prompt to confirm whichever number you're trying to call. Now, it just calls the default number.
Has anyone else noticed this and do you know of a fix?
Click to expand...
Click to collapse
Unfortunately, I have the same exact issue on Republic Wireless (Sprint MVNO) 4.4.2 and haven't found a solution....
Strangely, the issue seems to come and go. Additionally, the voice recognition is WAYYY off....it will try to call a contact that doesn't even sound like who I'm trying to call.
My solution is to instead, turn the screen on, then hit the microphone icon (top right corner). From there if you say "Call Pizza Hut", it seems to work 100% of the time.
I agree that the issue is quite irritating. Hopefully a future update to Touchless Controls fixes this.
It will be interesting to see if those on later android versions also experience the same issue...
Are you also experiencing the 2nd problem?
Voice recognition doesn't seem to be an issue for me.
clankfu said:
Are you also experiencing the 2nd problem?
Voice recognition doesn't seem to be an issue for me.
Click to expand...
Click to collapse
Nope, just confirmed -- tried to call a contact with 2 numbers in phonebook (cell & home) and the phone responded:
"I found two matches. Say the name after you hear the one you want to call. 'Person' home. 'Person' cell."
samwathegreat said:
Nope, just confirmed -- tried to call a contact with 2 numbers in phonebook (cell & home) and the phone responded:
"I found two matches. Say the name after you hear the one you want to call. 'Person' home. 'Person' cell."
Click to expand...
Click to collapse
Yea, that's what mine used to do. Now it just calls the top number.
Can anyone suggest a good caller name announcer for the device running MIUI 9 Global Developer ROM? I've tried a few available in the Play Store, but none of them works. They were not able to announce the caller real-time. A few read the missed call notification after the call gets disconnected. I assume it is some kind of a limitation of the OS. May be a change in setting could resolve the issue. Would really appreciate if anyone could help. I just want to listen who's calling while using my Bluetooth headset. That's all.
I have the same problem! Does anyone have the same problem and found the way to solve it?
When someone calls me, it rings once and disconnects on their end, but for me, I have no information on a missed call or anything, like they never called me, did anyone else face this problem?
And if yes, can someone help me solve this issue?
Exynos S21 ultra running April patch on ONE UI 5.1
It sounds to me like this is a carrier issue. Are you able to make outgoing calls? Did you get a new line of service when you got your phone, or did you use a different phone before?