When someone calls me, it rings once and disconnects on their end, but for me, I have no information on a missed call or anything, like they never called me, did anyone else face this problem?
And if yes, can someone help me solve this issue?
Exynos S21 ultra running April patch on ONE UI 5.1
It sounds to me like this is a carrier issue. Are you able to make outgoing calls? Did you get a new line of service when you got your phone, or did you use a different phone before?
Related
I've seen a similar thread on here about not being able to hear calls on the Qtek 909 whereby they can hear you but you can't hear them. I have this problem occasionally on my Vodafone VPx and it's very annoying.
More annoying though is the fact that I get no notification, sound, vibration, visual or otherwise, when someone is calling me. I do however get an alert afterwards to let me know that I have missed the call and I have to call them back.
Normally a soft reset will sort the problem out in the short term but normally only until 1 call has been received or volume settings have been changed or any buttons pressed.
Anyone else had similar problems or know of a ROM upgrade for the phone that may fix it? Vodafone currently have no support that I can find for the phone as it is relatively new in the UK.
After reading various problems I think this could be related to a known bluetooth issue. I've upgraded to BT3900 but still get the problem with not being able to hear calls or have them hear me.
Maybe some reading along those lines may help you decide if that's your problem.
The only thing I can think off with regards receiving no alerts could be you call options. I know this sounds basic, but you'd be amazed how often it's something like that we all seem to overlook.
How this gives you some ideas.
When you are calling someone that has another call (Call waiting), your PPC do not show in a notification or beep that the second party is having another line.
This is available on any very basic symbian phone.
Is there a cab to fix that?
Share a solution if you have one..
This is a feature from your carrier.... Call waiting works just fime on my Kaiser
rohanmaini said:
This is a feature from your carrier.... Call waiting works just fime on my Kaiser
Click to expand...
Click to collapse
Call waiting works fine on my Kaiser as well.
The carrier here has this option.
This is not the problem though.
The problem is when you call someone up from a PPC and that party has another line.
You should get a beep or a visual notification showing that the person you are calling has another line (my call is waiting on his phone).
So, if someone has a solution for this; please share.
Ok what I think your talking about is when you call someone that is on the phone, you hear a quick beep indicating that they are on the line, correct????
If this is what you are talking about, YES it is carrier specific. For example, when I call my father on Verizon and he is on the phone with someone else, after each ring there is a small beep. This is telling me that he is on the line.
There is nothing you can do to the Tilt to change this, it is carrier specific.
True... and there are also some PBX systems that provide the ring/beep when you are the call waiting. It usually depends on the phone system of the person you're calling.
fireblade63 said:
Call waiting works fine on my Kaiser as well.
The carrier here has this option.
This is not the problem though.
The problem is when you call someone up from a PPC and that party has another line.
You should get a beep or a visual notification showing that the person you are calling has another line (my call is waiting on his phone).
So, if someone has a solution for this; please share.
Click to expand...
Click to collapse
I think that is carrier specific too.. if I am calling some someone who is busy on another call, I get a completely diff to ringing tone.. Infact in most cases I get a audio message that the person I am calling is busy on another call and I should wait or call back later... Atleast thats what we have on all major carriers here in India...
ok we know that carrier has to support it, i know t-mobile does...
i used an old nokia to check and it works, it beeps and the whole screen says CALL WAITING, then it starts ringing...
i haven't seen any Windows Mobile touch screen or not that can do this
so its a carrier thing, yes t-mobile supports it.. windows mobile doesnt support it though!!!
so there is no way to make a .cab or something to fix this problem
It's not broken so how can you fix it? It's just not a feature that is offered.
it is not about the carrier. for instance when i had a nokia, when the other party was on the phone i had a beep in my phone, but with the WM devices, you cannot see that you call is waiting.
Hello, I have a small problem with my XZ. It's currently running 4.2.2 with build number 10.3.A.0.423.
The issue I'm facing with, is that when I am in a call and someone else calls me there is no warning sound that another person is calling me. The reject or answer call appears but there is no actual sound to announce that another person is calling me.
I have tried without any luck the following:
- checked/unchecked the call waiting option = it didn't work, if the option is unchecked than the person that tries to call me while I am on call with someone else gets a busy line, so in this case the option works as expected
- used pc companion to restore 4.2.2 as I thought that maybe some app i installed messed up this option = this also didn't work as after the fresh restore there was still no sound while I was in call with another person while someone else called me
So my question is that is this a bug of 4.2.2, does anyone else know of this issue? I goggled this problem without any luck in finding an answer.
Any suggestions or ideas?
Nice to see that the thread got 94 views but no reply. Am I the only one with this problem?
Can someone with the same firmware as mine test the behavior described by me? That way I could find out if it's a 4.2.2 bug or another issue.
I have in call sound problems.
When I reboot I can sometimes place one call without problems for as long as I want.
Other calls after that I have no sound, can't hear the call tone and other parties can't hear me.
Also incoming calls, i hear the phone ring but when i answer the other party can't hear me and i can't hear the other party.
The settings for sounds in the accessibility menu and noise reduction etc were off and stayed off. (other forum tips)
I also tried numerous factory resets with no avail
Can someone give me a hint how to fix it?
I have stock 4.2.2 International version of the S4 Active.
Baseband I9295XXUBMK2
Build JDQ39.I9295XXUBMK2
Kernel 3.4.0-2015525
Headset
I tried a different option. I can call with my bluetooth headset.
When i switch to speaker the in call sound drops. giong back to headset will not activate in call sound.
Same Here
The same happens to me. Only the bluetooth option works every time. I have tried several firmware and kernel versions and nothing has changed.
There is a workaround that I could find but it is totally impractical: http://forum.xda-developers.com/showthread.php?t=2371034
In forums for models / ROMs with a lot more users than this one (Nexus / CM) people with 4.2.2-based firmware versions there are many posts describing what could seems to be the exact same problem, which they have been able to fix via baseband updates or custom patches, but that does not really seems to be an option for the S4 Active...
mobieletelefoons said:
I have in call sound problems.
When I reboot I can sometimes place one call without problems for as long as I want.
Other calls after that I have no sound, can't hear the call tone and other parties can't hear me.
Also incoming calls, i hear the phone ring but when i answer the other party can't hear me and i can't hear the other party.
The settings for sounds in the accessibility menu and noise reduction etc were off and stayed off. (other forum tips)
I also tried numerous factory resets with no avail
Can someone give me a hint how to fix it?
I have stock 4.2.2 International version of the S4 Active.
Baseband I9295XXUBMK2
Build JDQ39.I9295XXUBMK2
Kernel 3.4.0-2015525
Click to expand...
Click to collapse
I to have the same problem but im on a I537! This is the second replacement device from ATT! Have noticed i can call out fine when someone calls no audio nor can they hear me,call back and it works fine.Also have noticed when a call is incoming or outgoing LTE will switch to 4G. My 1st I537 never did this!
davenger1 said:
I to have the same problem but im on a I537! This is the second replacement device from ATT! Have noticed i can call out fine when someone calls no audio nor can they hear me,call back and it works fine.Also have noticed when a call is incoming or outgoing LTE will switch to 4G. My 1st I537 never did this!
Click to expand...
Click to collapse
Same problem with my SGS4A. I was on i9295XXUBMK2, tried to update using the phone update option, which rendered my phone unusable. Flashed new stock ROM i9295XXUBMK3, now I can use the phone, although sound problem persists.
Making a call: reboot, call
Receiving a call: answer, hang-up, reboot, call back
Anyone with 4.3 that has this problem on SGS3, SGS4 or SGS4A?
Edit 21.8.2014
I had the speaker changed last week and so far no problems. I am slowly getting confident that I can rely on S4A as a phone also, not just tiny surf tablet.
I have same phone, never got this pb. However I got some SD card issues after updating to KitKat...
Partial solution... for me at least
Hi guys ,
having same issue, disabling 4G option solves my problem. But it-s impractic cause I want to use the 4g... in a huawei phone I solved same issue by disabling an option of "mobile data always on"
Don't know how it's related...
Same issue for me. I made lots of research with no results. Nobody knows...
same problem here with no solution yet
mobieletelefoons said:
I have in call sound problems.
When I reboot I can sometimes place one call without problems for as long as I want.
Other calls after that I have no sound, can't hear the call tone and other parties can't hear me.
Also incoming calls, i hear the phone ring but when i answer the other party can't hear me and i can't hear the other party.
The settings for sounds in the accessibility menu and noise reduction etc were off and stayed off. (other forum tips)
I also tried numerous factory resets with no avail
Can someone give me a hint how to fix it?
I have stock 4.2.2 International version of the S4 Active.
Baseband I9295XXUBMK2
Build JDQ39.I9295XXUBMK2
Kernel 3.4.0-2015525
Click to expand...
Click to collapse
same problem with in call and out call .... searched a lot about solution and no solution yet
I had a similar issue with bluetooth calls. First call would be fine, but after that I couldn't hear the other person on the line and they couldn't hear me. It turned out to be some kind of incompatibility with the Google "OK Google" detection with Galaxy S4-based phones. If I disabled it from detecting "From any screen", this seemed to correct the problem. However the setting might return on application updates. I would recommend trying that and see if it makes a difference. If it's not that, then I don't really know how to help you. I moved on from that phone over a year ago and have been happier ever since.
Hey everybody, I'm experiencing a strange issue with the new Moto X. It is not my phone only, because my friend has the same phone with the same problem.
When receiving or making calls, I can't hear the other end. When I make a call, I don't hear the ringing and I don't hear the voice when somebody calls me. If I try again to make or receive a call, I will then be able to hear the other end.
I don't have many apps installed, nor am I a novice to Android, so I've tried many of the typical troubleshooting methods. I'm wondering if this is a bug that others may be experiencing and if anybody has discovered a fix or workaround. Thanks!