Database Develop

[Q] Galaxy knackered after flashing new kernel

My Galaxy GTI9000 has gone into boot loop following attempting a kernel upgrade. I was trying to install the voodoo control for improved sound control and needed to upgrade the kernel to get it to work which I did, now all I get is the boot animation then a blank screen and the phone vibrates. Any advice on getting into recovery mode using a pc or other would be appreciated. I have a backup of the previous kernel on the phone.

Mate, info info info........
What kernal did you try to install? What Rom?
Are you rooted? How did you flash Odin, kernel flasher?
Can you pull batt, replace and get into download mode?
Have you tried to use a froyo kernel with gingerbread?
Sent from my GT-I9000 using XDA Premium App

Just reflash with stock rom if you can get into download mode.

pull out your battery, wait for 15 sec. Put it back and make 3 button combo. You shall be in download mode. Flash an other kernel

[Q] Galaxy Note totally Dead

Hi friends
I asking for help because yesterday i flash AOKP JB-4 in to my galaxy note N7000 but something went wrong in the middle of the rom install the screen put black and since then the phone is not working.
I'm going to explain all the process i made to flash the new rom
1. I install Clockwork Recovery in the galaxy note
2. I did a nandroid
3. I flash the rom with rom manager v5.0.2.1
4. The phone enter recovery wipe delvik and cache and started to install the rom
5. In the middle of the process the phone went black. is not the battery because it was 80% full
I have tried to enter recovery mode, download mode, use odin (but the PC dosent recognized the phone) i have also use [Linux] ModeDetect USBID Detector but this method is not compatible with the n7000
The phone was already rooted but the person who rooted didn't used odin so i don't now if that has something to do with the problem i have.
So is there anyone that can help me to safe the phone or is totally brick

Probably bricked since you didnt follow the warnings and instructions. There are methods in here somewhere were you might be able to partially revive the phone but loose some storage I believe.
Skickat från min GT-N7100 via Tapatalk 2

Happend to me to. Had to sent it to repair nothing made the phone to come on. They had to replace the motherboard in the phone.
Sent from my GT-N7000 using xda app-developers app

dante501 said:
Happend to me to. Had to sent it to repair nothing made the phone to come on. They had to replace the motherboard in the phone.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
You can try using PC odin in download mode to try installing a stock rom. If post update the phone is stuck in boot it probably means your phone is bricked.
Take it to samsung and if you are under warranty they will replace the mother board.
Happened to me. One of those unlucky ones who did factory wipe before the news spread out

Well he said I can't turn it so no download or battery charging mode just nothing. Black screen dead. Like I said when I flash a Rom that what happen to me and nothing no jig nothing made it possible to even turn on make the screen light up other then a motherboard exchange.
Sent from my GT-N7000 using xda app-developers app

[Q] [HELP]Can't access recovery or download

I have made a stupid mistake with my note, running an asylum rom, hydracore kernel, with no problems, however I hastily flashed the CM9/10 samsung apps zip and it has broken the phone, it boots however it hangs at the end of updating apps, and will not go any further.
The big problem is that I now cant get recovery or download mode with any key presses.
Any way to recover the device?

Check if it is taking charging or not.if taking charging then go for a jig.jig will put you in download mode.there is a thread on how to use a jig.ok
And in my opinion stay on stock please
Sent from my GT-N7000 using xda app-developers app

I don't understand is how flashing apk will break the recovery or download mode. remove the battery and try after a while

Have you tried removing the battery to turn off the phone and boot into recovery with home+power+up vol keys? Of course battery charge is of primary consideration when flashing.

Desperate call for help!

I recently rooted my Galaxy Exhibit 4G and installed the unofficial CM10 ROM. After a while I realized how slow everything was working, so I decided to turn back. However, when I tried to recover my previous backup (rooted stock) it gave me the stupid md5 error. followed directions on how to fix it, but then I had problems recovering the system and data. I then turned to Odin, but it didn't help, and my phone now tries to start up, reaches the Galaxy Exhibit 4G logo, and then fails to load, and tries over again. I can still access odin mode, but recovery won't boot and just reboots the whole system.
Can anybody please help me? What can I do? I tried to follow directions on the forums, and on the wiki, but everything just got worse. I have nowhere else to turn

Why not install a flavor of Gingerbread like Peach Sunrise or...gosh, I forget our GB days!
Honestly, look at Slimbean and an OC kernel. They've given me personally the best performance I've seen on this phone, but even they will slow down after a while. I do a fresh install every few months when the lag gets atrocious, keeps the phone spic and span.
There's only so much you can do on 300 Mb of ram- even on Gingerbread.

Sounds like you will have to flash a recovery using Odin. Once in recovery then you can flash a rom. The reason your phone won't boot up is probably because it has nothing to boot into. Try cm7. I have been running it while waiting for my Lumia 521 to get here and it is amazingly fast. Fastest my phone has ever been.
Sent from my SGH-T679 using xda app-developers app

BrandonCormier said:
Sounds like you will have to flash a recovery using Odin. Once in recovery then you can flash a rom. The reason your phone won't boot up is probably because it has nothing to boot into. Try cm7. I have been running it while waiting for my Lumia 521 to get here and it is amazingly fast. Fastest my phone has ever been.
Sent from my SGH-T679 using xda app-developers app
Click to expand...
Click to collapse
i used odin but i now have no access to recovery mode on my phone. every time i try to access i see the recovery logo but then it just reboots. i have factory phpne now which is already an improvement from the most brick my phone was beforre

danikvsn said:
i used odin but i now have no access to recovery mode on my phone. every time i try to access i see the recovery logo but then it just reboots. i have factory phpne now which is already an improvement from the most brick my phone was beforre
Click to expand...
Click to collapse
If you are using stock recovery then when you see the recovery screen hit the menu key. It should make the screen dim a bit. You should reboot into recovery then where you can flash cwm.
Sent from my SGH-T679 using xda app-developers app

[Q] Return to Official Firmware

I rooted and installed CWM and Cyanogen 10.1.3 on by brothers Note, GT-N7000. He didnt enjoy it as some unexpected errors were coming up sometimes. Luckily i found the official Rom 4.1.2 N7000DDLSC_INU.zip through sammobile. Now My questions are:-
1. What must i do to completely remove cyanogenmod and clock work recovery.
2. Do i need some additional files like, kernel or bootloader or phone or csc (or will just all this zip to pda will install it)
3. What else should i take care of?
Please advice i want to completely return to official state

nothing much.. just the rom file you downloaded in tar.md5 format. Boot into recovery and factory reset the phone. then boot into download mode and flash the new rom..

But will that remove clock work mod.?
And will my device get recognised in kies?
Sent from my GT-I9500 using xda app-developers app

Yes

Now there's another panga. The phone received the files properly fine through doing but not installing after booting
Gets shut down at logo. This I tried it 2.
Sent from my GT-I9500 using xda app-developers app

Kindly elaborate... Did you factory reset prior to using Odin?

Ok.
I went into cwm.
1 I factory reset. Wiped the data
2 wiped catche
3 wiped dalvic catche
4 went into download mode
5 with Odin 1.85 recognised device installed official rom.
The progress was shown in both phone and Odin. Factoryfs, kernel, hidden and catche shown to be successfully copied.
Only the auto reboot was selected
After device restated it shouted the Samsung logo. Without triangle
I thought it was a success.
Then I saw green Android logo with install process which seemed to have successfully completed on the phone.
but then just as the Samsung and a ring revolving screen came up, insured of booting up the device got shut down.
I thought it will reboot ok but it didn't. I tried restating several times but it kept getting shutdown.
I then flashed the official firmware again but this time after Odin transferred all the files on the phone, the green android logo is not able to complete the installation in the middle of it the phone is restating showing the battery charging logo, then the green bot trying to install then again it restarts.
To sum up
I note
Sent from my GT-I9500 using xda app-developers app

Sorry I posted by mistake
To sum up I I now am stuck in a loop where connecting the cable starts showing the battery charge logo, starts the device shows android logo with progress in the belly and a progress bar at the bottom restarts again allowing the battery logo again the Android thing and so on in a loop.
Please advice
Sent from my GT-I9500 using xda app-developers app

killachandra said:
I rooted and installed CWM and Cyanogen 10.1.3 on by brothers Note, GT-N7000. He didnt enjoy it as some unexpected errors were coming up sometimes. Luckily i found the official Rom 4.1.2 N7000DDLSC_INU.zip through sammobile. Now My questions are:-
1. What must i do to completely remove cyanogenmod and clock work recovery.
2. Do i need some additional files like, kernel or bootloader or phone or csc (or will just all this zip to pda will install it)
3. What else should i take care of?
Please advice i want to completely return to official state
Click to expand...
Click to collapse
Not sure if you have any other strong reason to go back to pure stock. Otherwise the easiest way is to install a stock base custom rom using PhilZ kernel and rom.zip. Sweet rom 10.5 is very good. Fast and stable.
Install purestock rom via odin is a pain and can cause lots of problems due to poor cable connection.
Sent from my phone.

killachandra said:
Sorry I posted by mistake
To sum up I I now am stuck in a loop where connecting the cable starts showing the battery charge logo, starts the device shows android logo with progress in the belly and a progress bar at the bottom restarts again allowing the battery logo again the Android thing and so on in a loop.
Please advice
Sent from my GT-I9500 using xda app-developers app
Click to expand...
Click to collapse
Did you have enough battery before flashing? Power off the phone.. Then connect it to ac charger for couple of hours and then remove the charger and start the phone.

I do believe I had more than 80%on the 1st attempt but I can't say that about this morning.
Any ways I did put it on charge today. Nearly two hours. Since it was looping on the battery and installation thing I put it on download mode. But now after removing from download mode is not even starting on download mode. I feel is further damaged. Any other software to interact with the phone or any other options I might have left
Sent from my GT-I9500 using xda app-developers app

If it is not the batery then software does not help. There is a tool name usb jig which can help put phone to DL mode.
Sent from my phone.

Thanks people for all the support. I think I will take it to the Samsung people as it is getting a little scary for my brother to trust me with this
Sent from my GT-I9500 using xda app-developers app