Stuck on CM boot screen - Galaxy S I9000 Q&A, Help & Troubleshooting

Hello
After installing CM10.1M2-I9001-STABLE-BY RDKK I am stuck on boot screen. Difference is that many other people can fix it with wipe data/factory reset and wipe cache partition, but I dont. Also I cannot get into download mode, all I do, I can enter into recovery mode.
I hope to get some help because who can live without phone these days...

mitzzž said:
Also I cannot get into download mode, all I do, I can enter into recovery mode.
Click to expand...
Click to collapse
look in My Android Solutions link below

read here http://forum.xda-developers.com/showthread.php?p=29331775#post29331775

Related

[Q] I think its a brick

my phone is looping the cyanogen mod 7 found here http://forum.xda-developers.com/showthread.php?t=849676 and it is not letting me do anything with it it is just in a constant boot loop can anyone help me
do you use Open recovery to update it?
do you wipe all? factory reset, cache and dalvik cache?
just restart back ur milestone and go to OR mode.
wipe all 3 and apply update again. that should work
milestone123 said:
my phone is looping the cyanogen mod 7 found here http://forum.xda-developers.com/showthread.php?t=849676 and it is not letting me do anything with it it is just in a constant boot loop can anyone help me
Click to expand...
Click to collapse
Can you enter bootloader mode?
Press d-pad up while powering on.
If the bootloader screen appears you're not bricked.
This might be helpful too:
http://and-developers.com/modes:bootloader_mode
http://and-developers.com/sbf:milestone
Please read and learn!
Regards,
scholbert

Galaxy S Problems - Need Help Fast!

Ok so I have been looking around for two days now and have not been able to find an answer to my problem. I've even searched and tried everything on these forums so please don't ask me to google or use the forums search.
I've got a Bell Canada Samsung Galaxy S GT-I9000M, it was working fine a few days ago and I picked it up to check my messages and it was frozen. After a few minutes I pulled the battery and went to restart the phone.
The phone will now only show the Samsung Galaxy S white logo and simply restart itself and play that logo over and over. If the phone is plugged into the wall it will show the battle charge logo briefly and than restart to the logo. It will go no further than this point.
I have tried to do a factory reset via Home + Power + Vol Up but it seems to reset itself before it will actually load into that menu. Home + Power + Vol Dn will bring me to the download screen which is stable and will not reset the phone.
This is where it gets strange, I have tried Odin and a 100% stock flash on the phone with no luck the phone just sits resetting. After a download of DarkyROM it will actually load the white Galaxy S logo along with the DarkyROM logo and simply go back to resetting.
So the phone is clearly in some state of a working order able to download and accept ROMs but just keeps restarting itself after the white initial Galaxy S logo.
Any and all help would be appreciated! I hope I have explained this problem well enough, maybe it is in need of being brought to a shop to be fixed? Just happens that the warranty expired last week, almost seems coincidental.
Thanks!
After you installed DarkyRom (or any other ROM with CWM), did you try re-entering the recovery menu? Perhaps you will now be able to enter recovery?
tptp said:
After you installed DarkyRom (or any other ROM with CWM), did you try re-entering the recovery menu? Perhaps you will now be able to enter recovery?
Click to expand...
Click to collapse
No, after the install of the ROM it would load up the white galaxy logo along with the DarkyROM logo and than just go back to resetting itself over and over. I could still go back to to the download but not access the reset menu.
Knagar said:
No, after the install of the ROM it would load up the white galaxy logo along with the DarkyROM logo and than just go back to resetting itself over and over. I could still go back to to the download but not access the reset menu.
Click to expand...
Click to collapse
run through My Android Solutions, link below and do the first step after that to immediately to recovery or download mode , than flash a rescue or resurrection kit from My Android collections, link below, all this done without sim card or exts SD card inserted
None of this has worked, I have tried every trick I can find on the net but I can't seem to get it to go.
As before the phone will go into download mode, will accept roms and so on as shown by the DarkyROM logo showing up and going away with the removal of it.
After every attempt I am still not able to get into recovery mode but am still able to access download mode. The phone seems to be in some state of working order but continues to reset itself only when turned on but will run stable in download mode.
ADB doesn't see the device and even if it did I think it would still just reboot once it started into recovery.
It's almost as if the phone starts and after it shows the starting Galaxy S GT I9000 it just turns itself off for some reason
Is their any way to totally reformat the phone and start 100% from scratch without getting into recovery to do factory reset?
Step by step instructions on what to do and download for Odin would be fantastic. I am still not sure 100% on what the PIT/Bootloader/PDA/Phone/CSC are or do so the files I need to put in those and a good explanation would be great!
This happens sometime. To fix, Do this.
1. Boot into download mode.
2. Flash stock ginger bread with Odin using 512 pit.
3. Now boot into recovery and wipe data/factory reset.
4. Boot again into download mode.
5. Flash devil or semaphore kernel.
5a note. Your phone doesn't need to be able to boot. All we need is recovery mode.
6. Boot into the new recovery and wipe data/factory reset.
7. Format /system.
8. Flash ROM / gapps etc.
9. Boot with success.
10. Happy dance time, brings good luck.
Sent from my GT-I9000 using xda premium
Knagar said:
Step by step instructions on what to do and download for Odin would be fantastic. I am still not sure 100% on what the PIT/Bootloader/PDA/Phone/CSC are or do so the files I need to put in those and a good explanation would be great!
Click to expand...
Click to collapse
ok, try flashing a gingerbread Ezboot loader, visit My Android collections, link below, has complete guide at download page
Well I've tried both suggestions with no luck. I am starting to think it's some sort of hardware problem which I can't understand because it is 100% stable and won't reset in download mode. It will accept ROMs and so on but instantly just starts to restart itself after the first logo is shown. No work around will let me into recovery mode and no method I have found so far will just reload how the phone boots. I guess it's time for a new phone eh chaps?
Knagar said:
Well I've tried both suggestions with no luck.
Click to expand...
Click to collapse
hmm, its strange..anyway, you should remove SIM Card and Ext SD card, and try to use any tool from My Android Collection, to format the Internal SD card and flash a 2e recovery to see , if you can get your recovery back or even a i9000 rescue kit would be good to go after formating your Internal SD card
Formatting you Internal SD card, will resolve any settings, data, delvik cache etc that would be the cause of your initial problem.. there are formatting tools as well a recovery tools that can be used to achieve this
Did u flash the correct stock firmware for ur I9000M? try this http://www.hotfile.com/dl/162558059/7efd7bc/I9000UGKG3_I9000BMCKG3_VMC.zip.html.
Source : http://www.sammobile.com/firmware/?page=3&model=GT-I9000M&pcode=0&os=1&type=1#firmware
Ok progress is being made, first I used Odin to load I9000UGKG3-I9000BMCKG3_VMC in the PDA slot without doing a reboot. Then I loaded JPK_Root_Recovery_2e using just the i9000_Kernel and was able to boot recovery.
After doing a Wipe Cache and then Factory reset the phone went back to a boot loop and I was unable to get back to the recovery menu.
After repeating the first steps I am once again in the recovery mode with no boot loot but am unsure as to where to go from here.
Currently the screen reads
Android system recovery <2e>
Samsung Recovery Utils
- for BML -
reboot system now
apply sdcard:update.zip
wipe data/factory reset
wipe cache
-------------------------------------------------
E: Invalid command argument
-- Install from package...
Finding update package...
Opening update package...
# Manual Mode #
--Appling Multi-CSC...
Installing Multi-CSC
multicsc : src /system/csc/BMC/system/ .
*EDIT* Seems once you restart from the recovery mode it goes right back to a boot loop, was not able to apply the SD card update either. So getting to recovery is currently a one time deal without having to go back and reload VMC and 2e. Once restarted all is lost.
You will need to flash another firmware with 3 file method @odin. Search on this forum a firmware and flash it!
Don't worry, u can't brick your phone that easily. I flashed my phone 10times in a day, for boot loops, when i tried to upgrade to 4.0.4
Sent from my GT-I9000 using xda premium
Ok so this time I used Odin to do VMC in the PDA slot, then I9000 Kernel went back to VMC and loaded that then when I restarted the phone it went back to the same boot loop.
I have no way to clear the internal SD or anything like that because the programs will not see my phone connected to my PC.
What could be causing my phone to just continue to restart?
Knagar said:
Ok so this time I used Odin to do VMC in the PDA slot, then I9000 Kernel went back to VMC and loaded that then when I restarted the phone it went back to the same boot loop.
I have no way to clear the internal SD or anything like that because the programs will not see my phone connected to my PC.
What could be causing my phone to just continue to restart?
Click to expand...
Click to collapse
I gave u a source, download the guide on flashing through odin. It should work. Dun flash 1 file by 1 file.
EDIT : u can find more firmwares here. http://forum.xda-developers.com/showthread.php?t=1102881&page=1
Pm me if you need any help!
Ok so here is where I am at..
I have tried everything everyone has listed so far. The only think that has made any sort of progress at the moment is going into download mode, connecting to the USB after loading Odin. Using JPK_Root_Recovery_2e I9000_Kernel.tar will bring me to the recovery screen.
wipe cache partition + reboot = boot loop
wipe cache partition + wipe data/factory reset + restart = boot loop
wipe data/factory reset + restart = boot loop
Any of the above mentioned plus loading stock firmware results in a boot loop.
Any of the above mentioned plus loading DarkyROM Resurrection 10.2 will again show the Galaxy S I9000 Logo plus the DarkyROM logo and proceed to boot loop.
Clear cache and factory reset than load of i9000XXJVT pit/pda/modem/csc results in boot loop.
If I am missing something please explain in detail and not shunt me off to some other page.
As before I have tried everything mentioned with no luck at getting past this boot loop. Clearly the phone is able to accept roms and so on so the internel SD seems to be ok but the boot sequence seems scrambled. Strange that it will boot to download and boot to recovery with JPK but upon restart it just boot loops and without Odin and JPK I can only get back to download mode.
Seems to me you also have some partition woes. Try to find an older rom (Milky's worked for me) that requires re-partitioning to be done. Flash via ODIN, wait for 10-15 mins for whole process to complete. CWM flash any rom from there ... (Darky's Extreme also repartitions)

Phone stuck on "No command" while trying to wipe the cache partition

I'm on 5.1.1 and this has not happened before. I booted into the Recovery mode and tried to wipe the cache partition, but as soon as I wiped the cache partition, the phone went into a mode with "No command" on the screen. I'm not able to reboot the phone using any of the reboot methods. Does anyone know what I can do to get resolve this issue or is there a way to reboot the phone somehow through the PC?
Resolved.
incisivekeith said:
I'm on 5.1.1 and this has not happened before. I booted into the Recovery mode and tried to wipe the cache partition, but as soon as I wiped the cache partition, the phone went into a mode with "No command" on the screen. I'm not able to reboot the phone using any of the reboot methods. Does anyone know what I can do to get resolve this issue or is there a way to reboot the phone somehow through the PC?
Click to expand...
Click to collapse
I was finally able to reboot the phone using the Download Mode button combinations, which didn't work earlier. Whew!

Xiaomi Mi 3 always reboot to recovery, cannot turn on phone

Hi guys, can anyone pls do help me. been troubleshooting and try to fix this thing for 2 days already.
The problem is, my fon will always boot to recovery. Eventhough i choose restart to system it will always go back to recovery.
I tried turn off, and push the power button only, still it will boot to recovery.
This started happening just a sudden, my fon run out of battery. Then its dead, i recharge. When try boot again the recovery boot problem begin.
I tried to restore my backup that iv made after the fresh installation of the CM13, restoration is good. But it still boot to recovery.
I then tried flashed the original rom with fastboot, ( i can access fastboot via the options in recovery, im using the TWRP recovery.
Or else i wouldnt be able to access fastboot also, even if i push (vol down+power button) when the fon is off, it will goes directly to recovery.
Anyone has any idea? please help =(
Fix
mufanz said:
Hi guys, can anyone pls do help me. been troubleshooting and try to fix this thing for 2 days already.
The problem is, my fon will always boot to recovery. Eventhough i choose restart to system it will always go back to recovery.
I tried turn off, and push the power button only, still it will boot to recovery.
This started happening just a sudden, my fon run out of battery. Then its dead, i recharge. When try boot again the recovery boot problem begin.
I tried to restore my backup that iv made after the fresh installation of the CM13, restoration is good. But it still boot to recovery.
I then tried flashed the original rom with fastboot, ( i can access fastboot via the options in recovery, im using the TWRP recovery.
Or else i wouldnt be able to access fastboot also, even if i push (vol down+power button) when the fon is off, it will goes directly to recovery.
Anyone has any idea? please help =(
Click to expand...
Click to collapse
Go the miui forum and search FIX : MI FLASH PARTITION TABLE DOESNT EXIST
You'll find a link by Harsimrat Sethi, me,, its the perfect fix
Harsimratsethi said:
Go the miui forum and search FIX : MI FLASH PARTITION TABLE DOESNT EXIST
You'll find a link by Harsimrat Sethi, me,, its the perfect fix
Click to expand...
Click to collapse
Hi bro thanks for suggestion, will do try it out. Iv looked at the solution, but it seems that is a problem if cant use fastboot flash with Mi Flash, I have no problem flashing to stock rom in fastboot. Iv used this solution from this link below to manually flash in the fastboot. Its working for people who are having problem of "MI FLASH PARTITION TABLE DOESNT EXIST".
http://forum.xda-developers.com/xiaomi-mi-3/general/guide-flashing-fastboot-miui-roms-t2938279
But the problem is still it will boot up to recovery also.

HTC one stuck on logo

Hello guys,today i tried to root my phone for the first time,i made all the steps (i think so)..it was working fine but i had some issues with the supersu,so i tried to flash it and after this i cant get my phone working,it stuck on htc logo..what should i do?
darky299 said:
Hello guys,today i tried to root my phone for the first time,i made all the steps (i think so)..it was working fine but i had some issues with the supersu,so i tried to flash it and after this i cant get my phone working,it stuck on htc logo..what should i do?
Click to expand...
Click to collapse
Can you boot to recovery?
VOLUME DOWN + POWER
Once hboot appears, release the buttons and use the volume keys to navigate to recovery.
Once in recovery, wipe Dalvik Cache and Cache and then attempt to boot normally. If that doesn't help, I would boot to recovery again and WIPE DATA/FACTORY RESET.
Hope this helps. Let me know what happens.
Sent from my Nexus 6 using XDA-Developers mobile app
fast69mopar said:
Can you boot to recovery?
VOLUME DOWN + POWER
Once hboot appears, release the buttons and use the volume keys to navigate to recovery.
Once in recovery, wipe Dalvik Cache and Cache and then attempt to boot normally. If that doesn't help, I would boot to recovery again and WIPE DATA/FACTORY RESET.
i tried it already nothing happens..
Click to expand...
Click to collapse
any solutions guys ?
darky299 said:
any solutions guys ?
Click to expand...
Click to collapse
Install ADB and fastboot on your PC. Connect your phone to your computer and use fastboot to boot into recovery. The steps are already on the site so I'll leave you to find them.
coal686 said:
Install ADB and fastboot on your PC. Connect your phone to your computer and use fastboot to boot into recovery. The steps are already on the site so I'll leave you to find them.
Click to expand...
Click to collapse
I can boot to recovery pressing power button and volume down..bootloader is unlocked with twrp..i dont know if this matters
darky299 said:
I can boot to recovery pressing power button and volume down..bootloader is unlocked with twrp..i dont know if this matters
Click to expand...
Click to collapse
The quote got messed up in your post above so I wasn't sure what you were having trouble with. Unless it's the systemless version, flashing Supersu (or any other root) changes your system partition. Wiping data or the caches won't fix that. The first thing to try is reflashing your ROM. If that doesn't work, you could use the RUU to go completely back to stock.
coal686 said:
The quote got messed up in your post above so I wasn't sure what you were having trouble with. Unless it's the systemless version, flashing Supersu (or any other root) changes your system partition. Wiping data or the caches won't fix that. The first thing to try is reflashing your ROM. If that doesn't work, you could use the RUU to go completely back to stock.
Click to expand...
Click to collapse
yes sorry its my fault i should mention it at the start..i have downloaded some roms,how im gonna flash them into to mobile?can i using fastboot ?
Ok i installed a rom to my phone,i connected with pc with the phone on recovery mode and i could copy paste some roms..i couldnt install most of them i got error,something about dm5 or something
darky299 said:
Ok i installed a rom to my phone,i connected with pc with the phone on recovery mode and i could copy paste some roms..i couldnt install most of them i got error,something about dm5 or something
Click to expand...
Click to collapse
Never seen that before. Maybe md5 error? If so, it could be that the files aren't downloading correctly for some reason.
Oook i solved the problem and now my phone is ok again,i had problem copying roms to my phone,i tried on mac and now its fine..thank you very much for helping you can close this thread

Categories

Resources