Database Develop

Has anyone gotten the Chromecast to turn ON the TV?

And if you have, tell us how you did it. I have been trying everything on my LG SIMPLINK TV and no go. All the right settings on the TV are ON but still no go,

CEC, or Consumer Electronics Control, allows for HDMI devices to be controlled with one remote control. If your television has CEC support, you may be able to turn on and change the input on your TV using your phone, tablet or computer while using Chromecast. Please note that in order for CEC to work (if CEC is supported by your TV), your Chromecast must be powered by a power outlet.
Manufacturers often call CEC by different names, including Anynet+ (Samsung), Aquos Link (Sharp), BRAVIA Link and BRAVIA Sync (Sony), HDMI-CEC (Hitachi), CE-Link and Regza Link (Toshiba), SimpLink (LG), HDAVI Control, EZ-Sync, VIERA Link (Panasonic), EasyLink (Philips), and NetCommand for HDMI (Mitsubishi).
Click to expand...
Click to collapse
From: https://support.google.com/chromecast/answer/3210071?hl=en&ref_topic=3267370

larryvand said:
And if you have, tell us how you did it. I have been trying everything on my LG SIMPLINK TV and no go. All the right settings on the TV are ON but still no go,
Click to expand...
Click to collapse
It worked after I turned on Anynet+ on my Samsung TV (from 2009). I also had to move from the TV USB to an external USB Power (actually it's my Google TV that provides power) because when the TV is off, it does not power the USB port.

This is a brand new 2013 LG smart TV. I have turned on the SIMPLINK and the auto power on, and the chromecast is using its own powersupply. I also have a SIMPLINK blu-ray player and that works perfectly. When I use the blu-ray player remote it will turn on the TV and switch to the right channel. Same with the LG TV remote control it can turn off and on the blu-ray player. So the HDMI-CEC (SIMPLINK) is not the issue. It is Chromecast as far as I can tell. With the TV off, if I try to cast a youtube video, chromecast does not turn on the TV for some reason. If the TV is already on but in a different input, it does switch to the right input so part of the Chromecast HDMI-CEC is working. I'm at a loss here.
What version of firmware your chromecast uses?

eyeballer said:
From: https://support.google.com/chromecast/answer/3210071?hl=en&ref_topic=3267370
Click to expand...
Click to collapse
That's interesting, because I have my Chromecast running off of USB power (from my TV's USB port), and it still turns on my TV and switches inputs automatically when it detects casting. For what it's worth, my TV is a cheap 32" Vizio smart TV (purchased earlier this year from Target).

Has anyone been able to plug it directly into their receiver and get it to turn it on?

Mine is working as advertised. Powered by AC.

wsimon said:
Has anyone been able to plug it directly into their receiver and get it to turn it on?
Click to expand...
Click to collapse
I got mine to flip to the input when I started a YouTube. Still working with it to see what all can be automated.
Also no power without the USB.
Marantz av7005 processor
---------- Post added at 02:49 AM ---------- Previous post was at 02:23 AM ----------
wsimon said:
Has anyone been able to plug it directly into their receiver and get it to turn it on?
Click to expand...
Click to collapse
I got mine to flip to the input when I started a YouTube. Still working with it to see what all can be automated.
Marantz av7005 processor

I have a Monoprice 4 port HDMI switcher and the Chromecast is plugged into it. It keeps turning on the other TV. My wife thought we had a ghost.

My 5 yo Samsung 46in LCD detects it as an AnyNet device and switches inputs but won't power on. My 2 yo Insignia 24in powers on.
I think it all rests on age
Sent from my Nexus 10 using Tapatalk HD

Mine works and turns the TV on and even switches to the Chromecast input if I start a cast.
I have a 3 year old Sony 46EX710 with the Chromecast plugged into power using the USB port on the TV. It seems my TV powers the USB ports at all time, even if the TV is off.
It doesn't switch back to the last input or turn the TV off if I stop the cast though (I'm sure that has more to do with the TV than the Chromecast).

My Sony 40EX400 turns on when I have it plugged into the wall, but not when plugged into the USB port. (indicating the usb port does not provide power when the tv is turned off)

I dont believe usb ports receive power from tvs when the tv is off thus the reasoning that you need the wall outlet. I have setup 3 chromecasts and all require wall outlet power to turn on tvs, 2 samsung and 1 sony tv.

I've got a 2011 LG TV (simplink) that works with turning it on. However, my Vizio smart TV doesn't turn on. I need to do some more testing with the Vizio, because it would be handy if it turned it on.

empirescrumble said:
That's interesting, because I have my Chromecast running off of USB power (from my TV's USB port), and it still turns on my TV and switches inputs automatically when it detects casting. For what it's worth, my TV is a cheap 32" Vizio smart TV (purchased earlier this year from Target).
Click to expand...
Click to collapse
That is interesting. Your USB ports must be powered all the time, even when your TV is off. What TV do you have.

timtlm said:
I've got a 2011 LG TV (simplink) that works with turning it on. However, my Vizio smart TV doesn't turn on. I need to do some more testing with the Vizio, because it would be handy if it turned it on.
Click to expand...
Click to collapse
Finally someone with an LG. I have a brand new LG 2013 47LA6200 smart TV and I still can not turn the TV ON (switches inputs just fine). I have both settings to ON for the SIMPLINK and AUTO POWER.
My Chromecast Firmware version is 12072 (you can see that on the Chromecast app). What is yours?

Mine has the same build number. My TV is the 47LW5600. Mine just worked without messing with any settings. Although, I've looked, and I can't seem to fine my simplink settings in the menus.
EDIT: Just realized that there's a simplink button on the stock remote that opens up the simplink menu. Only has options to turn off and on.

larryvand said:
That is interesting. Your USB ports must be powered all the time, even when your TV is off. What TV do you have.
Click to expand...
Click to collapse
Here is the TV I have:
http://store.vizio.com/e322ar.html
However, after the TV has been off for a long while, the Chromecast seems to shut off at some point, not sure at what point though. Oh well, I can live with that. My TV is usually on, even when I'm not watching it, for some kind of background noise, haha

timtlm said:
I've got a 2011 LG TV (simplink) that works with turning it on. However, my Vizio smart TV doesn't turn on. I need to do some more testing with the Vizio, because it would be handy if it turned it on.
Click to expand...
Click to collapse
I had to go into the CEC settings on my Vizio smart TV to make it work, but it now works perfectly!

mikaelsnavy said:
I had to go into the CEC settings on my Vizio smart TV to make it work, but it now works perfectly!
Click to expand...
Click to collapse
I have turned CEC on in the settings. There's only an on/off option, and detect devices, which it does detect the chromecast. It switches inputs just fine, but won't turn on the TV. I've also tested my HDMI receiver, and it doesn't turn that on either. However, I know the receiver can be turned on via CEC because my TV is capable of turning the receiver on. Maybe an update will offer better CEC compatibility.
EDIT: My raspberry pi turns on my vizio TV when you power it on, so the TV is definitely capable of being turned on via CEC.

AV Receiver setting

I have chromecast plugged into my receiver and want to play music through it without the TV on. I have been messing with the receiver settings but can't figure it out.
Control HDMI off - auto power on tv but receives now signal from receiver.
Control HDMI on with sub setting...
HDMI Passthrough off - auto power on the receiver and tv. turn off tv, receiver turns off as well.
HDMI Passthrough auto or on - auto power on the tv (reciver stays off)
I realize that this will vary with different av receiver models (mine is a sony d520). Any ideas?

Just a simple thought, because it is how I have mine hooked up, but are you powering your chromecast through your TV?
Edit: I unplugged the power for my Chromecast through my TV and plugged it in a desperate outlet. I am currently listening to Play Music through my receiver with my TV off.
Sent from my Nexus 7 using Tapatalk HD

monkey082506 said:
Just a simple thought, because it is how I have mine hooked up, but are you powering your chromecast through your TV?
Edit: I unplugged the power for my Chromecast through my TV and plugged it in a desperate outlet. I am currently listening to Play Music through my receiver with my TV off.
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
No I have the chromecast powered through an outlet. What are your hdmi pass through settings?

lol
got u

Jmahoneyy said:
No I have the chromecast powered through an outlet. What are your hdmi pass through settings?
Click to expand...
Click to collapse
I'll have to check when I get to the house.
Another thing to check is if your TV is able to turn on with an input such as Simplink, Anylink, etc. Each name changes depending on TV. Try turning that feature off in your TV menu.
Sent from my Nexus 7 using Tapatalk HD

monkey082506 said:
I'll have to check when I get to the house.
Another thing to check is if your TV is able to turn on with an input such as Simplink, Anylink, etc. Each name changes depending on TV. Try turning that feature off in your TV menu.
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
Thanks that did it for me. I obviously have to manually turn on the tv now but I figure if I want to watch something I am near the remote. In my case turning off cec on the tv as well as turning hdmi pass through off on the receiver gave me the setup I wanted. Now I can turn music on from anywhere in the house and have chrome cast turn the receiver on and play through the receiver.
Sent from my ASUS Transformer Pad TF300T using xda app-developers

Glad it worked. I have it setup as an option on my universal remote but when I'm just doing music I just have the receiver on.
Sent from my Nexus 7 using Tapatalk HD

Chromecast freezes TV control after use

After I stream something to Chromecast on my old 2007 LG HDTV all the physical TV controls on the TV and the remote don't do anything, and I have to unplug the power to my TV to regain control over my TV.
Is this a common issue?

I don't have that problem on two Samsungs.
Are you powering from the TV or the charger?
Do you have CEC enabled? Yes or no, have you toggled that in your tv settings?

Precog29 said:
After I stream something to Chromecast on my old 2007 LG HDTV all the physical TV controls on the TV and the remote don't do anything, and I have to unplug the power to my TV to regain control over my TV.
Is this a common issue?
Click to expand...
Click to collapse
Similar thing happened on my Seiki TV but only caused the favorite list freezing and caused several channels disappearing so that I had to rescan to get the channel list back.
My TV is still operational but it's quite annoying to rescan the channels.
BTW: I am using the USB port on the TV.
Sent from my SGH-T999 using XDA Premium App

Try your charger instead - just an idea for troubleshooting, you never know.

[Q] Turn TV Off after done with Chromecast

I really like how the Chromecast can turn my TV to the correct source and turn it on when I start casting. But is there a way to tell it to turn the TV off when I'm done with it. For example I'm using my ipad to start a movie on Netflix and cast it to the Chromecast. Everything works good. But I left the TV remote next to the TV. Is there a way to turn the TV off from the ipad or a computer with the Chromecast that way I can literally leave my TV remote in a drawer and never have to tough it?

I don't believe chromecast is capable of that. The device you're using has to have an IR blaster to be able to turn the tv on and off. Most new high-end androids have an IR blaster (G2, Note 3, S4, One).
Sent from my JEE TWO

If you have Verizon fios they have an app that goes through your router that you can change tv don't need IR, since it uses wifi.
Sent from my SM-N900P using xda app-developers app

The CEC Power off command is usually sent as part of the power down sequence of the device tat is sending it.
Pull the plug on the TV and it will not send a power down command to other devices on the CEC Network but hit the power Button and it will.
Since the Chromecast never really powers down (it does restart) it is difficult to know when it should send a power off command.
It would not be good to have it send one after every stream is done because most people aren't done watching TV after every stream completes.
Better would be if the CCast would send a Change Input command to go back to the last input before it took over (No command for that in CEC that I know of) so that if you streamed something when the TV was seeing the Cablebox, It would switch to CCast Input when it had a stream and then would switch back to whatever input it was on before CCast took over the screen.
That would be much more useful than a power off command which is great only when you want to watch one stream and then nothing else.

SKyRocKeting727 said:
I don't believe chromecast is capable of that. The device you're using has to have an IR blaster to be able to turn the tv on and off. Most new high-end androids have an IR blaster (G2, Note 3, S4, One).
Click to expand...
Click to collapse
Huh? The Chromecast can already turn on and change inputs on some tvs using HDMI CEC. It is most likely a design decision not to turn the tv off when it disconnects.

My TV has an option in the menu to auto switch inputs when it detects activity on one of them through HDMI. So when I turn my bluray on the TV will detect that and switch to INPUT 3 and preempt my satellite input. It's kind of a pain that when I insert a bluray into the player it auto switches even if I'm not ready.
-- EDIT: nevermind, that was an older TV. New one doesn't, so it's HDMI CEC (VieraLink for mine) as bozzykid said.

Asphyx said:
The CEC Power off command is usually sent as part of the power down sequence of the device tat is sending it.
...
Since the Chromecast never really powers down (it does restart) it is difficult to know when it should send a power off command.
It would not be good to have it send one after every stream is done because most people aren't done watching TV after every stream completes.
Click to expand...
Click to collapse
It'd be nice if there was a manual option... Maybe an option when you long click the chromecast button...

edscholl said:
It'd be nice if there was a manual option... Maybe an option when you long click the chromecast button...
Click to expand...
Click to collapse
I would rather they just made a TV Remote app for CCast to control the whole damn thing! LOL

I pull the USB plug (which supplies power) when I'm done watching.
Sent from my VEGAn-TAB using xda app-developers app

While I watching a stream on Chromecast, Google Android smartwatch with Chromecast control popped into my head as I picked up the smartphone to pause Netflix for a snack break.

For those having problems with LG tv's not displaying chromecast

This was driving me.crazy for days. My receiver would play chromecast on my LG tv but when plugged directly to any hdmi port on my LG tv, nothing would happen. My LG would say starting chromecast, then nothing, no signal. I tried all Google troubleshoot recommendations and nothing. Finally, when I changed the aspect ratio of my tv to 4:3 then unplugged and plugged the chromecast back in (movie was already being casted from Netflix) it finally recognized it and I was showing the movie! It worked on all hdmi ports, after being able to cast, i then changed the aspect ratio back to just scan or 16:9 . Hope this helps somebody
Sent from my HTCONE using xda app-developers app

No issues with my lg 2013 led 3d model. Set to 16:9 as normal and has always worked. Wonder if it is more a model specific issue. You should post your TV model info for others to compare as it isn't really "lg TVs" exactly
Sent from my SCH-R970 using Tapatalk

shelby04861 said:
No issues with my lg 2013 led 3d model. Set to 16:9 as normal and has always worked. Wonder if it is more a model specific issue. You should post your TV model info for others to compare as it isn't really "lg TVs" exactly
Sent from my SCH-R970 using Tapatalk
Click to expand...
Click to collapse
There have been many different TV's with this issue, especially with LG TVs. My sanyo has a similar issue, so I'm about to try this.
There have been many similar reports over on the chromcast google users forum:
https://productforums.google.com/forum/#!forum/chromecast

I just jumped on over there. A few here and there but there doesn't seem to be any rhyme or reason. What I am getting at is we really need model number of TV, how you have it setup, is powered by USB wall adapter or USB port on TV, extension vs no extension. If we can get model info and setup info we might be able to learn more. Even TV firmware will help. From there we might be able to find another person with the exact same TV to learn if they have the same issue or not. Just want to help of course so don't take this the wrong way. It could be something simple.
Sent from my SCH-R970 using Tapatalk

It could be something as simple as a timing issue, especially in the case where Chromecast is powered by TV USB port.
Counter-intuitive as it may seem, HDMI prefers being plugged in to a "live" receiver for the handshake to happen. If the TV doesn't listen to HDMI while powered "off" but Chromecast still gets powered, Chromecast might not negotiate the HDMI handshake properly - and that usually requires a disconnect and reconnect to renegotiate.
IMO Google should really push wall power more. TV power is asking potential trouble if the TV powers off the USB port while flashing an update. Unless the TV specifically supports connecting a USB hard drive, I don't expect it to have any sort of predictable power output. Yes, I know USB spec says it must, but I've had numerous USB hosts with variable output, or at least that's what USB Voltage Doctor tells me...

I actually did this this weekend....
I have my TV mounted to a wall like most people and there is a pair of dual outlets on the wall that the TV plugs into...
I replaced one of the standard AC outlets with one that had a single Grounded AC and Two USB ports and now power my CCast with those.
Most folks use the TV USB because it hides the wires but for the price of $5 you can replace a outlet and get a much better USB Power source.

shelby04861 said:
I just jumped on over there. A few here and there but there doesn't seem to be any rhyme or reason. What I am getting at is we really need model number of TV, how you have it setup, is powered by USB wall adapter or USB port on TV, extension vs no extension. If we can get model info and setup info we might be able to learn more. Even TV firmware will help. From there we might be able to find another person with the exact same TV to learn if they have the same issue or not. Just want to help of course so don't take this the wrong way. It could be something simple.
Sent from my SCH-R970 using Tapatalk
Click to expand...
Click to collapse
Someone over there, I'm assuming who works at google, keeps insinuating that they only have problems with TV's that have bad EDID's.

AustinMartin said:
Someone over there, I'm assuming who works at google, keeps insinuating that they only have problems with TV's that have bad EDID's.
Click to expand...
Click to collapse
Would be easy (but not free) to test with an EDID replacer like Dr. HDMI or HDMI Detective but to be honest I would expect other HDMI sources like DVRs and Blu-ray players to also have trouble if it was truly an EDID issue.
I know some very old (early days of HD) sets report they accept 1080p but don't actually display it, which is an EDID issue, but that really shouldn't be happening for anything modern.

bhiga said:
Would be easy (but not free) to test with an EDID replacer like Dr. HDMI or HDMI Detective but to be honest I would expect other HDMI sources like DVRs and Blu-ray players to also have trouble if it was truly an EDID issue.
I know some very old (early days of HD) sets report they accept 1080p but don't actually display it, which is an EDID issue, but that really shouldn't be happening for anything modern.
Click to expand...
Click to collapse
Yes, you would think, but google hasn't really made too much hdmi input equipment. The major things that are failing with hdmi issues are non-1080 native TV's such as 720 plasma's, and a lot of LG problems. I think that the latter additions to the edid standard to accommodate hdtv signals might be the issue.
Of course it would be nice if Google actually listed the TV sets that they are having issues with, but at least one person listed that when they talked to google support direct, they said that the one TV wasn't supported right now.

42Lw5300 from the wall outlet and from the tv usb both work
When I first got the cc it worked flawlessly on the tv hdmi input. Then I decided to plug it into my av receiver then when I went back to the tv recently, it wasn't working. All I got was , starting chromecast and then it would switch to the LG screensaver saying no signal. Numerous hard resets nothing..then I did the change screen format thing and it worked all the way
Sent from my HTCONE using xda app-developers app

I did the switch my tv thing to 4:3 after I notice when the cc starts it looks like the starting chromecast font was at a lower resolution...so by switching it I thought it would recognize my cc at that a lower resolution
Sent from my HTCONE using xda app-developers app

pelon90005 said:
I did the switch my tv thing to 4:3 after I notice when the cc starts it looks like the starting chromecast font was at a lower resolution...so by switching it I thought it would recognize my cc at that a lower resolution
Click to expand...
Click to collapse
AFAIK the Chromecast boot screen is 480p, but after that Chromecast will try to negotiate 720p or 1080p.
Aspect ratio (4:3 or 16:9) just determines how your TV handles the signal (don't stretch or anamorphic stretch) - it shouldn't change what the TV communicates.

I was also having problems with my LG television and Chromecast. Chromecast turned on via the LG's usb port but tv was pitch black. I had to pull the powercord off and plug it in 2-3 times before the tv worked. Turns out that the LG had faulty panel.. and the TV was like that from the first moment I bought it. Hooray for warranty! The tv was 2 weeks old when I had it repaired.