Hi,
i just installed CWM and Cyanogenmod yesterday everything is fine.
Now i tried to install a new kernel but the phone gets not detected in cwm mode, the driver and the fastboot drivers are installed, i hope somebody can help me. :fingers-crossed:
wudini said:
Hi,
i just installed CWM and Cyanogenmod yesterday everything is fine.
Now i tried to install a new kernel but the phone gets not detected in cwm mode, the driver and the fastboot drivers are installed, i hope somebody can help me. :fingers-crossed:
Click to expand...
Click to collapse
try to uninstall all drivers and reinstall them again
Danke für den Tipp Steppenwolf.
I manually installed the fastboot driver, its called "Fastboot interface (Google USB ID)" in CWM mode, it worked for me.
Related
I installed build27 AOKP one hour ago and after a first normal boot my phone keeps booting and cannot enter in recovery, can enter in download mode but the device is not recognized by the PC..I was doing a clean install from b23..which could be the problem?How can I solve this?? please help! thank you so much!
Try other usb ports and other odin version. If still not working, download your phone pc drivers again.
Need you help. Unsucsessful flashing, result - recovery is dead, bootloops.
Phone boots only in bootloader mode. I want to reflash recovery using Odin.
But Odin won't see my phone untill drivers are installed. So, here is the question:
Is it possible anyhow?
I've tryed everything I could.
I was on JB cm10 based rom.
-------------------------------------------------------------------------------------------------------------------------------------
Okay. xsenman, jiffer1991, thank you!
For some reason everything just worked ok on its own x)
Alex073 said:
Need you help. Unsucsessful flashing, result - recovery is dead, bootloops.
Phone boots only in bootloader mode. I want to reflash recovery using Odin.
But Odin won't see my phone untill drivers are installed. So, here is the question:
Is it possible anyhow?
I've tryed everything I could.
I was on JB cm10 based rom.
Click to expand...
Click to collapse
read this to install drivers http://forum.xda-developers.com/showpost.php?p=27205737&postcount=4571 and get your PC to recognize your phone
use WIKI to learn about how to go into download mode as well as flashing http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Series
dont u have to boot into download mode to make odin recognize ure phone
i´ve never had to install any drivers on my own
after booting into download mode everything went on its own
Hi all
I had to wipe my phone in custom recovery.
I wanted to flash it with RSD lite, as a lot of time, and i can't get it detected by my computer
I search to install drivers (wtf, they were on the computer..?!) and failed.
I gone to the configuration panel in my computer and uninstalled adb drivers
The i got "Fastboot smi S" drivers trying to install, failed too
I uninstalled moto drivers and reinstalled with the file Motorola_End_User_Driver_Installation_5.9.0_64bit.msi
rebooted
same problem...
i dont know how to make this fastboot mode detected again ....
Thx for help!
I had the same problem 2month ago with windows 8.
Instal sdk tools if you don't do that before or if it's always not working use an other computer because it's just a driver bug.
Sent from my XT890 using xda premium u
PELLET Nolwenn said:
I had the same problem 2month ago with windows 8.
Instal sdk tools if you don't do that before or if it's always not working use an other computer because it's just a driver bug.
Sent from my XT890 using xda premium u
Click to expand...
Click to collapse
hi
i tried to reinstall sdk, didnt worked.
i finally restored the computer to a prior date, like 3/4 days ago it was working, and i have been able to flash the rom with RSD
fabulous69 said:
hi
i tried to reinstall sdk, didnt worked.
i finally restored the computer to a prior date, like 3/4 days ago it was working, and i have been able to flash the rom with RSD
Click to expand...
Click to collapse
Just had the same kind of problem on Window 7 after playing with fastboot mode and various tools, this is how I solved it:
My XT890 in fastboot mode was recognized as "Unkown device"
=> I uninstalled the driver for this device.
My XT890 was thenidentified as "fastboot smi s" and would not install whatever I did
=> uninstalled "Motorola Device Manager" and "Motorola Mobile Drivers Installation 6.3.0"
=> reinstalled Motorola Device Manager (get it there : motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481 , sorry new users cant post links)
then I plugged back my phone in fastboot mode and Windows correctly installed the drivers
dont have the phone anymore, but thx for sharing your experience, might be useful if anybody meets this problem again in the future.
have a nice week.
hi all,
i have the following problem...
yesterday i obtained the root permisions for the galaxy and then i installed a cwm... and after that i got the problem bootloop. i tried to use odin and fix it but my windows 7 doesn't recognize it (i installed samsung kies and all the drivers). then i removed the cwm recovery and now i get Deleting Cryption Meta Data message before i enter in stock recovery and can't do nothing. Any solution?
sorry for my bad english
Check this link may help : HERE
nothing if i connect the phone to the pc windows says USB device not recognized
Try this HERE
EwOkie said:
Try this HERE
Click to expand...
Click to collapse
the phone goes into download mode and recovery mode 3e stock...i see the battery logo and samsung logo but if i connect the phone when in download mode to the PC it doesnt recognize it
Ok Follow this here :
Unplug Phone from PC.. if using Kies uninstall it ...Reboot PC
Install Samsung latest USB Drivers.. Reboot PC when done
Open ODIN
Plug in Phone while in Download mode to PC.. till it Recognises it
Now open ODIN and Try again
Check My HOW TO at my signature and scroll to bottom
ewokie said:
ok follow this here :
Unplug phone from pc.. If using kies uninstall it ...reboot pc
install samsung latest usb drivers.. Reboot pc when done
open odin
plug in phone while in download mode to pc.. Till it recognises it
now open odin and try again
check my how to at my signature and scroll to bottom
Click to expand...
Click to collapse
all done bro!!! You are the best! Thanx a lot
No problem glad it worked out for you :good:
danielbulan97 said:
hi all,
i have the following problem...
yesterday i obtained the root permisions for the galaxy and then i installed a cwm... and after that i got the problem bootloop. i tried to use odin and fix it but my windows 7 doesn't recognize it (i installed samsung kies and all the drivers). then i removed the cwm recovery and now i get Deleting Cryption Meta Data message before i enter in stock recovery and can't do nothing. Any solution?
sorry for my bad english
Click to expand...
Click to collapse
hey buddy i experienced this problem before...
use this CWM6012-CM9-recovery ..
hope this help you
Sent from my GT-I9001 using xda premium
Hy all,
My phone it s booting only in recovery mode and that is a black screen and i can t do anything and my pc also can t see the device ... how can i fix this problem ? I can only enter in download mode ...but if my device is not recognized my posibilities are limitated or 0 !
I unnistalled kies and all samsung usb driver and installed again samsung usb driver and my pc see the device but don t recognize the drivers. i can t use odin also.
Pls help !
Cocutzul said:
Hy all,
My phone it s booting only in recovery mode and that is a black screen and i can t do anything and my pc also can t see the device ... how can i fix this problem ? I can only enter in download mode ...but if my device is not recognized my posibilities are limitated or 0 !
I unnistalled kies and all samsung usb driver and installed again samsung usb driver and my pc see the device but don t recognize the drivers. i can t use odin also.
Pls help !
Click to expand...
Click to collapse
Try to use different usb port on pc. To pull out, push in cable in usb port while phone is in download mode and Odin is started. Try another usb cable.
P.S. what did you do that you got non booting system?
Sent from my GT-I9070 using Tapatalk
Flashing cm 10.2.. I ve changed the cable, the usb ports...same sitation...my pc see an unknown device and install the drivers 1.5.27.00 and that s all
Cocutzul said:
Flashing cm 10.2.. I ve changed the cable, the usb ports...same sitation...my pc see an unknown device and install the drivers 1.5.27.00 and that s all
Click to expand...
Click to collapse
Is recognised by Odin?
If it is, then reflash stock!
highmage said:
Is recognised by Odin?
If it is, then reflash stock!
Click to expand...
Click to collapse
Nop
Cocutzul said:
Nop
Click to expand...
Click to collapse
Why didn't you read CM 10.2 thread? It is written that it has black screen on recovery.
Try with Odin again, try to pull and put back usb cable. You have Windows 7? Does it show new hardware at all?
You have used Odin before? If not look for some guide on youtube. Maybe you miss something.
Try with ODIN v1.85 and ODIN v3.xx
Do you have any PC activity when you get to Recovery? I read that it just has black screen, but it is functional. Maybe ADB shell is working, so you can flash CoCore over it.
You can try to install this on PC: http://forum.xda-developers.com/showthread.php?t=2105707
There you have adb shell, and with some commands you can install kernel. After that you can reboot to Recovery again and you will have working Recovery (but still non booting system). Next step is to download some JB stock based ROM and to push it to sd card (you can use that Total commnader in link I gave you). After that just install ROM and it should work.
I am at work now, so I can't help you in details.
shut_down said:
Why didn't you read CM 10.2 thread? It is written that it has black screen on recovery.
Try with Odin again, try to pull and put back usb cable. You have Windows 7? Does it show new hardware at all?
You have used Odin before? If not look for some guide on youtube. Maybe you miss something.
Try with ODIN v1.85 and ODIN v3.xx
Click to expand...
Click to collapse
I wanted to flash somthing else ... and for no attention i flashed that! I tried odin 1.85 and 3.04 and 3.07 on win 7,8 and xp sp3 . The device is unkonwn for all of this .
Cocutzul said:
I wanted to flash somthing else ... and for no attention i flashed that! I tried odin 1.85 and 3.04 and 3.07 on win 7,8 and xp sp3 . The device is unkonwn for all of this .
Click to expand...
Click to collapse
Read rest of my post, I change it.
If you can't handle it - find someone that has more knowlage in Android to help you (that can do it for you).
Uninstall Kies if you have reinstalled it and remove any samsung drivers, do a registry clean on Windows with CCleaner (you can find it with Google), reboot pc then install this usb drivers, reboot again and try if now the phone in download mode is recognized on Odin (firstly powen on in download mode then connect to usb)