Revolution 3.5 ROM Boot loop when mobile data is turned on - HTC Desire C

I have just loaded rev 3.5 desensed rom (tried the same with Rev sense rom 3.3 too) and everything worked fine. Apps run well and fast, wifi is working well at all 722, 767 and 806 mhz kernels included.
Problem i have is that regardless of kernels (including original stock kernel @ 600mhz), the phone reboots when i turned on mobile data. It will reboot back into the android launcher and load up to the point when it connects to 3G mobile data... it would reboot.
I do not use an EXT3 partition and hv not selected to use it for swapspace when installed the rom.
Anyone faced the same challenge before? and any resolution? Seems like the phone i have is happy running @ 806mhz for whatever apps i throw at it. Problem just lies with the mobile data. I can use it now as per normal without mobile data.
Help please. Thank you

Resolved not fixed
Further testing with the apn fixed version 3.5 desensed revolution rom yields success but only when mobile network is set to GSM only, which reduces speed to only 2G for mobile data. Revolution roms does not seem to support wcdma well, despite the really good work done and excellent performance. A pity. Hope this is fixed in future.
Went with nameless rom 7.4.3 with latest 800mhz Prometheus kernel to stabilise the wifi, and things are working flawless now. Thought i might pop this for others facing similar challenges. You will have to source nameless roms from other sites. Cheers.

No WCDMA
Thanks for this.
I have exactly the same problem and thought it was a problem with my settings. Obviously a Revolution Rom problem.

i found that too

Related

Wifi problem FIXED

Ok.. so i thought this was weird.
i was having wifi problem. not being able to get connected or even see the networks on my phone.
CM6.1 and superhybrid 2.11 does not have problem its just when you flash a theme or kernel it start causing problem (FOR ME IN MY CASE, i dont know about you), and wifi eventually stops working.
currently i am running lastest radio korean version.
Whenever i flash a wild monk or other kernels on CM6.1 wifi stops working
When i flashed the stock theme that was provided on the op from superhybrid 2.1.1 the wifi stopped working.
i just thought it was weird and wanted to know if any of you guys are experiencing same problem as me.
Let me know Thanks!
I've tried a few WildMonks on CM 6.1 nightlies, and don't have any wifi problems...
Sent from my Nexus One using XDA App
which version are u using.
CM 250 nightly, and I think the WildMonks is:
2.6.35.8_AVS-925mV-CM_CFS_20101116_2329.zip
Its listed as #154 in the About Phone info (don't know why they never make the file name the same as the version info)
Sent from my Nexus One using XDA App
I always flashed wildmonk's kernel right after i flashed CM6.1 nightlies, and my wifi is always wonky (i get a lot of errors enabling wifi and wifi tethering).
Next time I do a full wipe, i wont apply the kernel and see if that happens

[Q]NEW CM10 UNOFFICIAL - By Aben / Mobile data

Hello
I have been using NEW CM10 UNOFFICIAL - By Aben now for a whole day and it is running fast and good, no reboots or fc.
My problem is that i can not get Mobile data to work on EDGE/GPRS, APN saves correctly and using same info as another A99 running GB (and connects) This rom is the first i have problem to get the data to run on.
Does anyone here have EDGE working on CM10
/ Found out that i had a typo in the settings =)
Now everything i need works
kunghenke said:
Hello
I have been using NEW CM10 UNOFFICIAL - By Aben now for a whole day and it is running fast and good, no reboots or fc.
My problem is that i can not get Mobile data to work on EDGE/GPRS, APN saves correctly and using same info as another A99 running GB (and connects) This rom is the first i have problem to get the data to run on.
Does anyone here have EDGE working on CM10
/ Found out that i had a typo in the settings =)
Now everything i need works
Click to expand...
Click to collapse
Hi kunghenke,
this is also my first rom ( technically second for AndroId rc3 for Kernel)
My data with BSNL was working fine (manual inout , saves after)( bsnlnet Accesspoint work very quick, as compared to GB)
i also updated to FIX 1, and patch also.then i didnt check for NET, i m on Vodafone now, without internet.
FIX 1 is very drastic improvement over previous 1.
Strange Problem today : Carrier Signal bars are missing, only that blank triangle...
Rest call ,incoming/outgoing are working well.........

[HELP] Need bluesleep fix for galaxy ace & wifi connection error

My previous mobile was Galaxy S2 i had no problems in searching for fixes in tweaks for it.
but now am using iPhone 5 & my sidekick mobile is mys sisters old galaxy ace.
was an S2 user so I dont like stock roms & i like to tweak the ROMS as i need.
Here are my problems
1.after searching a lot i found a decent working ICS MIUI ROM .
no lag, everything works perfectly.
but i have a great drop in battery. when i checked the stats it was a kernel wakelock names "bluesleep" which is preventing the device from sleep. i had found fix for this in forum but not a fix for ace so people please gimme a link for fix
2. Wifi problem was ter since i was in stock ROM, wifi gets connected but no internet. but when i tether from my iPhone wifi is working. in other places its not working.
HELP ME PLEASE !!
rajaspidey said:
My previous mobile was Galaxy S2 i had no problems in searching for fixes in tweaks for it.
but now am using iPhone 5 & my sidekick mobile is mys sisters old galaxy ace.
was an S2 user so I dont like stock roms & i like to tweak the ROMS as i need.
Here are my problems
1.after searching a lot i found a decent working ICS MIUI ROM .
no lag, everything works perfectly.
but i have a great drop in battery. when i checked the stats it was a kernel wakelock names "bluesleep" which is preventing the device from sleep. i had found fix for this in forum but not a fix for ace so people please gimme a link for fix
2. Wifi problem was ter since i was in stock ROM, wifi gets connected but no internet. but when i tether from my iPhone wifi is working. in other places its not working.
HELP ME PLEASE !!
Click to expand...
Click to collapse
For the bluesleep process that pervent your device to enter sleep mode you should take a look if it's a bug of the rom and if it's reported from other users. I think that the Wi-Fi is maybe a problem due to a not perfect flash of the rom. In anyway wipe everything, format system and sd card, than reflash the rom, you migh be good to go.
P.S. Try to freez bluesleep with greenfy and see what appen. This could be call a temporary fix if you don't care that much about Wi-Fi.
Good luck and have a great life
MeltingSnowman said:
For the bluesleep process that pervent your device to enter sleep mode you should take a look if it's a bug of the rom and if it's reported from other users. I think that the Wi-Fi is maybe a problem due to a not perfect flash of the rom. In anyway wipe everything, format system and sd card, than reflash the rom, you migh be good to go.
P.S. Try to freez bluesleep with greenfy and see what appen. This could be call a temporary fix if you don't care that much about Wi-Fi.
Good luck and have a great life
Click to expand...
Click to collapse
Bluesleep is the problem with Bluetooth in ICS rom with non ICS kernel. gonna try Ics kernel now. but for someother devices there is flashable fix for bluesleep.
wifi problem has been ter since stock ROM. i think its related to Baseband. Am searching for a good baseband for India.
Also can you suggest me a decent MIUI rom which work without lag. the rom which i was is without lag but the only problem is bluesleep & the previous wifi one
rajaspidey said:
Bluesleep is the problem with Bluetooth in ICS rom with non ICS kernel. gonna try Ics kernel now. but for someother devices there is flashable fix for bluesleep.
wifi problem has been ter since stock ROM. i think its related to Baseband. Am searching for a good baseband for India.
Also can you suggest me a decent MIUI rom which work without lag. the rom which i was is without lag but the only problem is bluesleep & the previous wifi one
Click to expand...
Click to collapse
I'm not very much in MIUI rom, I've never test out one so I don't know what suggest to you, sorry. I prefer the up-to-date CM 10.1 by armv6 team that works perfectly with no bugs.
MeltingSnowman said:
I'm not very much in MIUI rom, I've never test out one so I don't know what suggest to you, sorry. I prefer the up-to-date CM 10.1 by armv6 team that works perfectly with no bugs.
Click to expand...
Click to collapse
i tried CM 10.1 its laggy. BTW there are lotta CM 10's here dunno which is official. can you link me to that. i like the features in MIUI.
rajaspidey said:
i tried CM 10.1 its laggy. BTW there are lotta CM 10's here dunno which is official. can you link me to that. i like the features in MIUI.
Click to expand...
Click to collapse
Here are some roms you can test and I think you'll ot get in troubles
MIUI ICS (based on CM9): http://forum.xda-developers.com/showthread.php?t=2234863
MIUI GB (based on CM7.2): http://forum.xda-developers.com/showthread.php?t=2280553
Here are the two reliable and up to date CM 10.1 available for now:
CM 10.1 by Armv6 Team: http://forum.xda-developers.com/showthread.php?t=2199575
CM 10.1 by Mardon (based on Armv6 version): http://forum.xda-developers.com/showthread.php?t=2212438 (contains some modification and fix)
MeltingSnowman said:
Here are some roms you can test and I think you'll ot get in troubles
MIUI ICS (based on CM9): http://forum.xda-developers.com/showthread.php?t=2234863
MIUI GB (based on CM7.2): http://forum.xda-developers.com/showthread.php?t=2280553
Here are the two reliable and up to date CM 10.1 available for now:
CM 10.1 by Armv6 Team: http://forum.xda-developers.com/showthread.php?t=2199575
CM 10.1 by Mardon (based on Armv6 version): http://forum.xda-developers.com/showthread.php?t=2212438 (contains some modification and fix)
Click to expand...
Click to collapse
am using woft studio version. that CM9 one. no lag but bluesleep i ll try a different kernel & post results then.
am a civil engineer. this is my work phone(iPhone is primary) all i need is an decent rom(preferebly MIUI) with working wifi, no lag cz i need to call quickly & good battery
rajaspidey said:
am using woft studio version. that CM9 one. no lag but bluesleep i ll try a different kernel & post results then.
am a civil engineer. this is my work phone(iPhone is primary) all i need is an decent rom(preferebly MIUI) with working wifi, no lag cz i need to call quickly & good battery
Click to expand...
Click to collapse
The rom you may looking for is a slimmed rom based on stock 2.3.6 rom by Samsung with Battery Extender kernel. The fastest and less battery-eater rom is the AOSP GB but has no working 3G connection so that's why you may not like it. Custom ROM suffers some instability some times and they're not perfect so that's why you should use on a phone you use for your job a stock based rom, in my opinion.
P.S. Do you really need a MIUI rom updated to a newer version of Android?
Also i have one more doubt. when i moved to custom kernel the boot logo animates like my phone gonna die i9s that normal or due to some voltage fluctuations ??
MeltingSnowman said:
The rom you may looking for is a slimmed rom based on stock 2.3.6 rom by Samsung with Battery Extender kernel. The fastest and less battery-eater rom is the AOSP GB but has no working 3G connection so that's why you may not like it. Custom ROM suffers some instability some times and they're not perfect so that's why you should use on a phone you use for your job a stock based rom, in my opinion.
P.S. Do you really need a MIUI rom updated to a newer version of Android?
Click to expand...
Click to collapse
yes i need MIUI with ICS (JB is laggy)
does MIUI in GB had same feature as ICS one.
the ROM i have is perfect except for bluesleep
rajaspidey said:
Also i have one more doubt. when i moved to custom kernel the boot logo animates like my phone gonna die i9s that normal or due to some voltage fluctuations ??
Click to expand...
Click to collapse
No problems at all, it's "normal" (i know sounds weird XD) when you flash a kernel that do not came with the rom itself. I've never faced instability related to voltages even in overclock. Remember that not every CPU is capable of the same overclock. If you doubt about stability do a stress test of cpu trough an app (I use it to test oveclock frequecies).

[Q]ROM with fully working 2g network (=no signal lost)

Premise : as I said in the title,I'm not asking 'what is the best rom ?'.
Now,here's my problem and my question :
Since a month I have 2g connecyion problems (YES,I use 2g connection and I switch to 3g only when I need a data connection;I save more battery and my phone can last 30-40 hours from 100 to 15%),very often my phone loose the signal and it won't turn back until I reboot.
I read in the forum that is a cm bug and in some vanir rom the problem is fixed.
Here's what i did trying to fix the problem :
-restore stock firmware through kdz file (v20a)
-root/recovery and unsecure boot flash.
-flash cm 10.1.3 and iodak kernel (clean instal) -> still 2g problem.
-flash vanir stable 4.3.1 with stock or werewolf kernel (clean install) -> 2g problem and sometimes when I lost the signal the phone gets hot and my battery drains really fast. I have also another problem : my phone was at 90%,i turned it off and in the morning the battery was at 0%.
-flash zaiben rom with iodak kernel(really old version that worked correctly in the past)-> wifi problems after some reboots.
-flashed miui 3.12.6 from miuiandroid with optimus prime kernel -> 2g problems.
I don't know what to do,can someone suggest me a stable rom without network problems (wifi/2g,3g/gps/nfc) and maybe with good performance and battery life ?
Yesterday I flashed 4 different rom (always with a clean install) and I'm tired to try different rom so please,don't answer me 'make backup and try this or that rom' and share your experience instead.
Thanks in advice.
stock rom, or any custom 4.2.2+ rom with EPRJ RIL implemented, which you can do yourself. look for my tutorial in general subforum, replacing CM RIL with EPRJ RIL gives rock-stable connection
I already looked your tutorial and the official thread of the tool but afterinstalling java,net framework etc,the tool doesn't work.
It says 'java not recognised' or something similar.
And what about kernels ? Does they (or some of them) create some kind of problems ?
So,if I'll make the tool works and I'll replace the ril,can I use cm 10.1.3 with iodak 8.0 kernel without problems ?
The strange thing is that network worked correctly with cm 10.1.3 for months,but now it doesn't.
BTW,wich rom are you using ? Can it fit for my phone use ?
MEDIACOM SmartPad 810c
ROM : First 4.3 (4.0.3)
moss20 said:
I already looked your tutorial and the official thread of the tool but afterinstalling java,net framework etc,the tool doesn't work.
It says 'java not recognised' or something similar.
And what about kernels ? Does they (or some of them) create some kind of problems ?
So,if I'll make the tool works and I'll replace the ril,can I use cm 10.1.3 with iodak 8.0 kernel without problems ?
The strange thing is that network worked correctly with cm 10.1.3 for months,but now it doesn't.
BTW,wich rom are you using ? Can it fit for my phone use ?
MEDIACOM SmartPad 810c
ROM : First 4.3 (4.0.3)
Click to expand...
Click to collapse
you gotta edit some settings on your computer, if you have issues with java. check out the link in the tutorial to the program i used to extract .jar file, it has the proper troubleshooting ^^
kernels shouldn't have issue with 2g/3g, but i do know some custom kernels have issues with wifi on stock and stock-based rom that appear randomly, and just as randomly go away (wifi stuck on turning on)
and yeah, you should be able to use iodak+cm combination without the issue. and it is strange that the problem just now started appearing, but hey, if this works, you got yourself set for future
atm i'm back on modified stock with iodakv7, i needed proper mhl support. i've however used i think all the roms for our device atleast for a week or so. carbon, slim, omni, vanir, cm, aokp, pac, mokee...
Ok,I'll try to fix java problems and I'll se what happens and I'll report here
MEDIACOM SmartPad 810c
ROM : First 4.3 (4.0.3)
moss20 said:
Premise : as I said in the title,I'm not asking 'what is the best rom ?'.
Now,here's my problem and my question :
Since a month I have 2g connecyion problems (YES,I use 2g connection and I switch to 3g only when I need a data connection;I save more battery and my phone can last 30-40 hours from 100 to 15%),very often my phone loose the signal and it won't turn back until I reboot.
I read in the forum that is a cm bug and in some vanir rom the problem is fixed.
Here's what i did trying to fix the problem :
-restore stock firmware through kdz file (v20a)
-root/recovery and unsecure boot flash.
-flash cm 10.1.3 and iodak kernel (clean instal) -> still 2g problem.
-flash vanir stable 4.3.1 with stock or werewolf kernel (clean install) -> 2g problem and sometimes when I lost the signal the phone gets hot and my battery drains really fast. I have also another problem : my phone was at 90%,i turned it off and in the morning the battery was at 0%.
-flash zaiben rom with iodak kernel(really old version that worked correctly in the past)-> wifi problems after some reboots.
-flashed miui 3.12.6 from miuiandroid with optimus prime kernel -> 2g problems.
I don't know what to do,can someone suggest me a stable rom without network problems (wifi/2g,3g/gps/nfc) and maybe with good performance and battery life ?
Yesterday I flashed 4 different rom (always with a clean install) and I'm tired to try different rom so please,don't answer me 'make backup and try this or that rom' and share your experience instead.
Thanks in advice.
Click to expand...
Click to collapse
Don't use unsecure boot flash' it is.unnecessary
Try optimus play kernel, it is excellent for me (wifi, 3g always on, whole day of battery and more)
Sent from my LG-P880 using Tapatalk
now I'm on miui 3.12.6 with optimus prime kernel and I edited the RIL using flyingbear's tutorial but it's too early to say if it works but first impression seems good.
I'm too busy to check another rom (i'd like to use vanir 4.3.1 or cm 10.1.3) and other kernel but when I'll try it,I'll write my impression
I have similar problem with network on latest miui.When i restart device or just turn it on/off i can find network untill i go to airplane network and switch it off again then everything is fine.Also it happened just 1 time that i lost my network while my phonewas on.I did discovered that this is MiUi problem since i never got this kind of behavior on any previous rom.Last couple of days even fter restart my network is ok no need to use airplane trick anymore.So again i will say this is miui bugg for somereason.
Sent from my LG 4X HD refrigerator.
Trust me,it's a month that I "fight" with mobile network,it's a common problem for all non-stock based roms,sometimes happens and sometimes not.
However you can fix it with flyingbear's tutorial.
MEDIACOM SmartPad 810c
ROM : First 4.3 (4.0.3)

No Mobile Data on Nameless ROM (KitKat 4.4.2 - clean install)?

Hey guys,
I have just installed Nameless ROM KitKat 4.4.2 (stable) because of a lot trouble with AOSP Lollipop 5.1. Everything's fine, except mobile data. I don't know what to do. Of course it's activated in the menu, I also tried enabling the roaming options. I also tried switching to 2G, but no change.
Normal GSM without data as well as wifi are working fine.
I appreciate your help very much!
PS: I don't know if it is of any use, but before I installed Paranoid Android (v3.99=KitKat) and the AOSP kept crashing continously. Then I installed PacMan ROM (which I had before Lollipop), and there the keyboard and the launcher crashed so I couldn't even start with this ROM.
_______________________
EDIT:
I installed another distro which replaced the problem with other problems xD

Categories

Resources