Hello guys,
I flashed a new ICS rom on my Optimus 2x, coming from a Miui rom. Everything worked fine.
But, i wanted to flash Miui back, so i flashed it, and now i've got a big problem: the mobile network doesn't work anymore.
I changed the baseband, the RIL, apn's, i did almosrt everything possible, and i figured out that this issue is on a Miui Rom. I tested another Rom, and the data was working fine.
Thanks for your help
Nobody?
...?
I have just loaded rev 3.5 desensed rom (tried the same with Rev sense rom 3.3 too) and everything worked fine. Apps run well and fast, wifi is working well at all 722, 767 and 806 mhz kernels included.
Problem i have is that regardless of kernels (including original stock kernel @ 600mhz), the phone reboots when i turned on mobile data. It will reboot back into the android launcher and load up to the point when it connects to 3G mobile data... it would reboot.
I do not use an EXT3 partition and hv not selected to use it for swapspace when installed the rom.
Anyone faced the same challenge before? and any resolution? Seems like the phone i have is happy running @ 806mhz for whatever apps i throw at it. Problem just lies with the mobile data. I can use it now as per normal without mobile data.
Help please. Thank you
Resolved not fixed
Further testing with the apn fixed version 3.5 desensed revolution rom yields success but only when mobile network is set to GSM only, which reduces speed to only 2G for mobile data. Revolution roms does not seem to support wcdma well, despite the really good work done and excellent performance. A pity. Hope this is fixed in future.
Went with nameless rom 7.4.3 with latest 800mhz Prometheus kernel to stabilise the wifi, and things are working flawless now. Thought i might pop this for others facing similar challenges. You will have to source nameless roms from other sites. Cheers.
No WCDMA
Thanks for this.
I have exactly the same problem and thought it was a problem with my settings. Obviously a Revolution Rom problem.
i found that too
Hey guys,
Has anyone tried CyanogenMod 10.1.3 stable on GSM network?
I just installed it, totally love most features, but found out I can't send SMS (receiving fine, phonecalls fine also) nor connect to mobile internet (APN should be set up fine).
Tried this with two different SIM cards - Vodafone CZ and T-Mobile CZ.
Both SIMs have SMSC correct and it works out of the box on stock ROM (4.0.4 - 217) but not in CM. Also on other phones it's fine. The problem must be somewhere in the CM 10.1.3.
Changing SMSC works - if changed to different number, it breaks sending messages for stock as well in the same manner, changing it back makes it work again (but not for CM).
I'm using Safestrap 3.65.
I tried completely wiping the CM installations and testing on clean system, with and without GApps. No luck with that
CM 10.1.0 stable has the same issues, 10.2-20131102 snapshot M1 and 10.2-20131126 nightly have the mobile internet fixed (it was probably an APN problem) but SMS can't be sent either.
Go SMS Pro with custom SMSC set to the right value doesn't help.
Updated from a 14 months old installation of Eclipse ICS 1.2 on safestrap 2.11 - huge leap
Any ideas on how to solve it? I'd love to use CM, but not being able to send texts is a deal-breaker Even some workaroud using different messaging application would be greatly welcome
Hey, I solved it myself - the Mentor's GSM patch helped Download here: http://www.internauta37.altervista.org/how-and-patch-fully-enable-gsm-verizon-cdma-phones-android
Mentor's thread here: http://forum.xda-developers.com/showthread.php?t=2368572
Premise : as I said in the title,I'm not asking 'what is the best rom ?'.
Now,here's my problem and my question :
Since a month I have 2g connecyion problems (YES,I use 2g connection and I switch to 3g only when I need a data connection;I save more battery and my phone can last 30-40 hours from 100 to 15%),very often my phone loose the signal and it won't turn back until I reboot.
I read in the forum that is a cm bug and in some vanir rom the problem is fixed.
Here's what i did trying to fix the problem :
-restore stock firmware through kdz file (v20a)
-root/recovery and unsecure boot flash.
-flash cm 10.1.3 and iodak kernel (clean instal) -> still 2g problem.
-flash vanir stable 4.3.1 with stock or werewolf kernel (clean install) -> 2g problem and sometimes when I lost the signal the phone gets hot and my battery drains really fast. I have also another problem : my phone was at 90%,i turned it off and in the morning the battery was at 0%.
-flash zaiben rom with iodak kernel(really old version that worked correctly in the past)-> wifi problems after some reboots.
-flashed miui 3.12.6 from miuiandroid with optimus prime kernel -> 2g problems.
I don't know what to do,can someone suggest me a stable rom without network problems (wifi/2g,3g/gps/nfc) and maybe with good performance and battery life ?
Yesterday I flashed 4 different rom (always with a clean install) and I'm tired to try different rom so please,don't answer me 'make backup and try this or that rom' and share your experience instead.
Thanks in advice.
stock rom, or any custom 4.2.2+ rom with EPRJ RIL implemented, which you can do yourself. look for my tutorial in general subforum, replacing CM RIL with EPRJ RIL gives rock-stable connection
I already looked your tutorial and the official thread of the tool but afterinstalling java,net framework etc,the tool doesn't work.
It says 'java not recognised' or something similar.
And what about kernels ? Does they (or some of them) create some kind of problems ?
So,if I'll make the tool works and I'll replace the ril,can I use cm 10.1.3 with iodak 8.0 kernel without problems ?
The strange thing is that network worked correctly with cm 10.1.3 for months,but now it doesn't.
BTW,wich rom are you using ? Can it fit for my phone use ?
MEDIACOM SmartPad 810c
ROM : First 4.3 (4.0.3)
moss20 said:
I already looked your tutorial and the official thread of the tool but afterinstalling java,net framework etc,the tool doesn't work.
It says 'java not recognised' or something similar.
And what about kernels ? Does they (or some of them) create some kind of problems ?
So,if I'll make the tool works and I'll replace the ril,can I use cm 10.1.3 with iodak 8.0 kernel without problems ?
The strange thing is that network worked correctly with cm 10.1.3 for months,but now it doesn't.
BTW,wich rom are you using ? Can it fit for my phone use ?
MEDIACOM SmartPad 810c
ROM : First 4.3 (4.0.3)
Click to expand...
Click to collapse
you gotta edit some settings on your computer, if you have issues with java. check out the link in the tutorial to the program i used to extract .jar file, it has the proper troubleshooting ^^
kernels shouldn't have issue with 2g/3g, but i do know some custom kernels have issues with wifi on stock and stock-based rom that appear randomly, and just as randomly go away (wifi stuck on turning on)
and yeah, you should be able to use iodak+cm combination without the issue. and it is strange that the problem just now started appearing, but hey, if this works, you got yourself set for future
atm i'm back on modified stock with iodakv7, i needed proper mhl support. i've however used i think all the roms for our device atleast for a week or so. carbon, slim, omni, vanir, cm, aokp, pac, mokee...
Ok,I'll try to fix java problems and I'll se what happens and I'll report here
MEDIACOM SmartPad 810c
ROM : First 4.3 (4.0.3)
moss20 said:
Premise : as I said in the title,I'm not asking 'what is the best rom ?'.
Now,here's my problem and my question :
Since a month I have 2g connecyion problems (YES,I use 2g connection and I switch to 3g only when I need a data connection;I save more battery and my phone can last 30-40 hours from 100 to 15%),very often my phone loose the signal and it won't turn back until I reboot.
I read in the forum that is a cm bug and in some vanir rom the problem is fixed.
Here's what i did trying to fix the problem :
-restore stock firmware through kdz file (v20a)
-root/recovery and unsecure boot flash.
-flash cm 10.1.3 and iodak kernel (clean instal) -> still 2g problem.
-flash vanir stable 4.3.1 with stock or werewolf kernel (clean install) -> 2g problem and sometimes when I lost the signal the phone gets hot and my battery drains really fast. I have also another problem : my phone was at 90%,i turned it off and in the morning the battery was at 0%.
-flash zaiben rom with iodak kernel(really old version that worked correctly in the past)-> wifi problems after some reboots.
-flashed miui 3.12.6 from miuiandroid with optimus prime kernel -> 2g problems.
I don't know what to do,can someone suggest me a stable rom without network problems (wifi/2g,3g/gps/nfc) and maybe with good performance and battery life ?
Yesterday I flashed 4 different rom (always with a clean install) and I'm tired to try different rom so please,don't answer me 'make backup and try this or that rom' and share your experience instead.
Thanks in advice.
Click to expand...
Click to collapse
Don't use unsecure boot flash' it is.unnecessary
Try optimus play kernel, it is excellent for me (wifi, 3g always on, whole day of battery and more)
Sent from my LG-P880 using Tapatalk
now I'm on miui 3.12.6 with optimus prime kernel and I edited the RIL using flyingbear's tutorial but it's too early to say if it works but first impression seems good.
I'm too busy to check another rom (i'd like to use vanir 4.3.1 or cm 10.1.3) and other kernel but when I'll try it,I'll write my impression
I have similar problem with network on latest miui.When i restart device or just turn it on/off i can find network untill i go to airplane network and switch it off again then everything is fine.Also it happened just 1 time that i lost my network while my phonewas on.I did discovered that this is MiUi problem since i never got this kind of behavior on any previous rom.Last couple of days even fter restart my network is ok no need to use airplane trick anymore.So again i will say this is miui bugg for somereason.
Sent from my LG 4X HD refrigerator.
Trust me,it's a month that I "fight" with mobile network,it's a common problem for all non-stock based roms,sometimes happens and sometimes not.
However you can fix it with flyingbear's tutorial.
MEDIACOM SmartPad 810c
ROM : First 4.3 (4.0.3)
Guys, A little Help!
I am currently using my old Galaxy S I9000, as my HTC has gone to Service Centre for a week.
Last time I left it with JB Custom Rom (C-Rom Bean v1.9.0 Final) which was working quite OK! Now its too much laggy and slow all over while on JB Rom. I have already tried CM11, CM10.2, Slimkat, SpiritRom and Dark Unicorn (all 4.x.x and above).
Currently I am on CM7.2, which is working quite fine, considering its based on GB 2.3.7. I was also looking for working Lewa OS link, as I liked the one that I installed on my HTC, but couldn't find one.
Can anyone help me to understand what has happed to make this phone go soooooooo slow. Even if I am unable to instal Android 4 and above, I would still need the link for Lewa OS. If anyone has it, that'd be most helpful.
samrat_castle said:
Guys, A little Help!
I am currently using my old Galaxy S I9000, as my HTC has gone to Service Centre for a week.
Last time I left it with JB Custom Rom (C-Rom Bean v1.9.0 Final) which was working quite OK! Now its too much laggy and slow all over while on JB Rom. I have already tried CM11, CM10.2, Slimkat, SpiritRom and Dark Unicorn (all 4.x.x and above).
Currently I am on CM7.2, which is working quite fine, considering its based on GB 2.3.7. I was also looking for working Lewa OS link, as I liked the one that I installed on my HTC, but couldn't find one.
Can anyone help me to understand what has happed to make this phone go soooooooo slow. Even if I am unable to instal Android 4 and above, I would still need the link for Lewa OS. If anyone has it, that'd be most helpful.
Click to expand...
Click to collapse
Mainly, the problem is on the way the different roms use the dalvik vm and the way aforementioned roms are unable to leash cache used. So, my recomendation is a good rom which a good preset over dalvik used of memory and applications like App Cache Cleaner to erase the cache every now and them.
For me the perfect combination is:
1. Stable CM10.2.1 rom
2. Kernel Semaphore 3.3.0 (avoid version 3.3.0s because it gives problems with Netflix, besides version 3.3.0 is perfect and you can activate bigmem with Semaphore Manager App, so 3.3.0s is nonsense) (NOTE: You need odin for installing it, follow this instruction)
3. Gapps: gapps-jb-20130813-signed.zip
4. Semaphore manager app. Settings for Semaphore Manager:
- Smartassv2 Governor: Awake ideal freq 900000 / Up rate 10000 / Down rate 99000 / Max CPU 50 / Min CPU 20 / Ramp up 300000 / Ramp down 300000 / Sleep ideal freq 300000 / Sample rate jiffies 2.
- Deep Idle: Enable
- Lock min freq to 100Mhz: Disable
- Active Scheduler: CFQ
- Bigmem: Enable
5. My build.prop to be placed within /system/ (remember to set for this file rw-r--r-- permissions and change owner to root).
6. A launcher like Zeam Launcher or Lightning Launcher
7. And finally an installed App Cache Cleaner Pro to erase the cache every now and them.
Best.
I have flashed CM10.2.with minimal gapps, but now unable to connect to internet. Tried flashing many times after wiping data, clearing cache and clearing Dalvik cache, but still unable to connect to internet.
EDIT: That as a temp problem with my carrier network. So, I have installed CM10.2 with above details. Working fine so far. Will let you know if there is any problem with this setup.
samrat_castle said:
I have flashed CM10.2.with minimal gapps, but now unable to connect to internet. Tried flashing many times after wiping data, clearing cache and clearing Dalvik cache, but still unable to connect to internet.
EDIT: That as a temp problem with my carrier network. So, I have installed CM10.2 with above details. Working fine so far. Will let you know if there is any problem with this setup.
Click to expand...
Click to collapse
Try to flash the final build 2.2 of SlimBean 4.3 with SlimGapps.
It is faster than CM10.2 and has much better battery life (especially if you use TRDS mode)
tetakpatalked from OPO
samrat_castle said:
I have flashed CM10.2.with minimal gapps, but now unable to connect to internet. Tried flashing many times after wiping data, clearing cache and clearing Dalvik cache, but still unable to connect to internet.
EDIT: That as a temp problem with my carrier network. So, I have installed CM10.2 with above details. Working fine so far. Will let you know if there is any problem with this setup.
Click to expand...
Click to collapse
Good to know, enjoy.
tetakpatak said:
Try to flash the final build 2.2 of SlimBean 4.3 with SlimGapps.
It is faster than CM10.2 and has much better battery life (especially if you use TRDS mode)
tetakpatalked from OPO
Click to expand...
Click to collapse
Thanks for your piece of advice, I tried it long time ago but I still prefer a CM10.2.1 + a tweaked Semaphore 3.3.0 + Zeam Launcher + my build.prop + minor removing of CM apps.
Best.
kuskro said:
Good to know, enjoy.
Thanks for your piece of advice, I tried it long time ago but I still prefer a CM10.2.1 + a tweaked Semaphore 3.3.0 + Zeam Launcher + my build.prop + minor removing of CM apps.
Best.
Click to expand...
Click to collapse
Guys, we have got Android Lollipop 5.0.2 for our device, though an alpha build from @humberos. I am using it as of now, though without Gapps. Its Beautiful! And working!
Download Link: https://drive.google.com/folderview?id=0B7hG2LTQDF3ifjhybEs3TGVGNDlsRk1vS05vNGZOdjVDVXRRbVRwNmVJV2dodGEzdDFmVDA&usp=sharing&tid=0B7hG2LTQDF3ifnZrdWk1MXZYTnZ2dlpUb2JSRHE0Z0l6QmpULWh3SFg2bXdjQTNLbGNMZjQ
More Info: http://forum.xda-developers.com/showthread.php?t=2488037&page=96
samrat_castle said:
Guys, we have got Android Lollipop 5.0.2 for our device, though an alpha build from @humberos. I am using it as of now, though without Gapps. Its Beautiful! And working!
Download Link: https://drive.google.com/folderview...Z2dlpUb2JSRHE0Z0l6QmpULWh3SFg2bXdjQTNLbGNMZjQ
More Info: http://forum.xda-developers.com/showthread.php?t=2488037&page=96
Click to expand...
Click to collapse
I have tried to flash the zip last week but it stucked on "extracting system" every time. It just updated my recovery to TWRP 2.8.4.1, but didn't even reboot.
Maybe it is phone that isn't OK anymore. Its internal memory isn't working correctly anmore.
tetakpatalked from Nexus 7 flo
It takes approx 15-20 minutes for installation. You need to be a bit patient with this
samrat_castle said:
It takes approx 15-20 minutes for installation. You need to be a bit patient with this
Click to expand...
Click to collapse
Cool I tought it failed as the installation process never took that long yet. I will try again then.
tetakpatalked from N7100
OK, I 've flashed it. Lollipop on the i9000. It took 19min until the process was finished.
I have also flashed PA Gapps pico by Tkruzz, all other are probably too big.
The Omni LP alone (just Omni 5.0) is extremely smooth, but quite slow.
After flashing of Gapps (which BTW work perfectly fine) my i9000 has turned into the slowest device I ever used. It is way slower than Eclair, actually just same slow like my S8000 running CM7 from externalSD card.
It takes 15sec to open PlayStore, up to 2min to download and install an app (even smaller apps), about 5-10 sec to react on pressing any button and the device is often running out of memory and soft reboots are the result. It takes up to 15sec until the keyboard appears etc.
Otherwise all important functions work fine, but Lollipop is too big a task for the i9000 and except that it just works, there is simply no many people who would like to use a device with auch slowdowns. Even biggest fans of the i9000 (I might be among them) will have to face the fact that Android 5.0 is actually out of the hardware capacity of the S1
tetakpatalked from Nexus 7 flo
I myself am using CM10.2. Which works fine, with just a bit of lag. Its either that or gingerbread. Anyways, omni 5.0 for i9000 is just experimental at this stage, with promise for a more stable build by @humberos. It may be light on the system, but who knows.
I'd say buy a newer model if we need new OS as software is as good as its hardware and vice versa.
Omni is excellent and very stable, although in Alpha stage. That isn't my point.
LP system cannot get smaller, the i9000 is simply too slow for Android 5.0
It was just an info for people who dream to use Lollipop on i9000. It is a huge slowdown.
I have much faster devices but I don't use LP even there.
tetakpatalked from the legendary i9000 running Omni 5.0
Hey,
I suggest you guys to use SlimBean v2.9 with the latest Slim JB gapps. The phone will be quite fast, despite this device is very old... This version of SlimBean is not available on their site but is here:
https://mega.co.nz/#!6xJnVaBY!qhF1g99N0zE1w6XZd3E2IPgvlBgAJWGrYluZehgajNE
I think further versions are significantly slower and this one offers quite a lot of customization as well. Good luck with the i9000 [emoji3]
aToS88 said:
Hey,
I suggest you guys to use SlimBean v2.9 with the latest Slim JB gapps. The phone will be quite fast, despite this device is very old... This version of SlimBean is not available on their site but is here:
https://mega.co.nz/#!6xJnVaBY!qhF1g99N0zE1w6XZd3E2IPgvlBgAJWGrYluZehgajNE
I think further versions are significantly slower and this one offers quite a lot of customization as well. Good luck with the i9000 [emoji3]
Click to expand...
Click to collapse
Which Android version is that Slim build and why isn't it on the Slim server?
Is there a md5 checksum?
tetakpatalked from N7100
It's an android 4.1.2 and SlimBean version 2.9. It's not on the official site because it's not the latest 4.1.2 version they have distributed. That's the 3.1 if I'm not mistaken.
Sorry I don't have an md5 for the file...
aToS88 said:
It's an android 4.1.2 and SlimBean version 2.9. It's not on the official site because it's not the latest 4.1.2 version they have distributed. That's the 3.1 if I'm not mistaken.
Sorry I don't have an md5 for the file...
Click to expand...
Click to collapse
Good to know. How is the battery life there? With CyanogenMod I remember that 4.1 and 4.2 had terrible battery life, while 4.3 was a lot better.
tetakpatalked from Nexus 7 flo
It can last from morning till the evening but of course depends on the usage.
From what I remember Slim on 4.1.2 was real solid, probably one of my favourite roms. 3.1 wasn't that bad either
Sent from my Note 4
Soryuu said:
From what I remember Slim on 4.1.2 was real solid, probably one of my favourite roms. 3.1 wasn't that bad either
Sent from my Note 4
Click to expand...
Click to collapse
I've tried today build 2.9
It worked fine but for some strange reason it didn't recognize my wifi router...all other networks just fine, but not the important one. I couldn't solve it, tried everything.
But I have feeling that SlimBean 4.3 is at least as good.
Hey, BTW I have filmed Omni 5.0.2, I will try to edit it and upload tomorrow
tetakpatalked from Nexus 7 flo
tetakpatak said:
I've tried today build 2.9
It worked fine but for some strange reason it didn't recognize my wifi router...all other networks just fine, but not the important one. I couldn't solve it, tried everything.
But I have feeling that SlimBean 4.3 is at least as good.
Hey, BTW I have filmed Omni 5.0.2, I will try to edit it and upload tomorrow
tetakpatalked from Nexus 7 flo
Click to expand...
Click to collapse
I don't think I ever got around to trying the 4.3 version, I remember the 4.2.2 version was a bit hit and miss when it came to battery (but then again, all 4.2.2 roms save Gamerzrom and a few others were). By the time the 4.4.x version came out I moved onto the S3 so I can't vouch for that, but Slim roms are pretty good
And you legend, thanks a lot