Hi there, I have a Nook HD+ with CM10.1 running out of a sd card I got from NCACARD
I am very happy with my setup, however I'd like to install a kernel that would allow me to overclock the cpu a bit. The kernel that comes in the card doesnt alow for ovecloking.
What are my options to do this? what kernel should I flash? do I just flash it in CWMR?
I am very experinced in flashing roms/kernels/radios/rpm etc into my GSIII but I am new to the nook business.
Thanks for any help.
If you can find an overclocked kernel that is for the Nook HD+ and has been set up for flashing with CWM on SD, you can do it. But I doubt you are going to find such a thing.
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
If you can find an overclocked kernel that is for the Nook HD+ and has been set up for flashing with CWM on SD, you can do it. But I doubt you are going to find such a thing.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
And why is that? not much development going on for it? Thanks anyways, is good to know I am looking for big foot lol
ljbrenes said:
And why is that? not much development going on for it? Thanks anyways, is good to know I am looking for big foot lol
Click to expand...
Click to collapse
Very limited development, but getting better as more devices get out there.
Sent from my Galaxy Tab 2 using XDA Premium
Related
I had bought a nook to android sd card but i have a new nook and want to do the boot process myself but i find that a lot of these instructions are hard to follow. Yes im a noob and any help would be appriciated.
Thanks!!
colorfulnookie said:
I had bought a nook to android sd card but i have a new nook and want to do the boot process myself but i find that a lot of these instructions are hard to follow. Yes im a noob and any help would be appriciated.
Thanks!!
Click to expand...
Click to collapse
Look here for simplified instructions.
http://taosaur.blogspot.com/2011/09/running-cyanogenmod-7-from-sd-nook.html?m=1
Sent from my NookColor using Tapatalk
colorfulnookie said:
I had bought a nook to android sd card but i have a new nook and want to do the boot process myself but i find that a lot of these instructions are hard to follow. Yes im a noob and any help would be appriciated.
Thanks!!
Click to expand...
Click to collapse
You say that you have a "new" nook. Is it a color or tablet? They are not interchangeable, as far as roms go.
dparrothead1 said:
You say that you have a "new" nook. Is it a color or tablet? They are not interchangeable, as far as roms go.
Click to expand...
Click to collapse
Its a nook color. Will cm7 still work on it?
leapinlar said:
Look here for simplified instructions.
http://taosaur.blogspot.com/2011/09/running-cyanogenmod-7-from-sd-nook.html?m=1
Sent from my NookColor using Tapatalk
Click to expand...
Click to collapse
Ok thanks they are easy to follow but are they for the nook color or tablet and fyi my nook is running the stock firmware with the update of 1.3.0 will the instructions still work?
EDIT: The instructions are for the nook color so im ok on that part but i dont know of it matters on whatever version my stock os is on.
colorfulnookie said:
Ok thanks they are easy to follow but are they for the nook color or tablet and fyi my nook is running the stock firmware with the update of 1.3.0 will the instructions still work?
EDIT: The instructions are for the nook color so im ok on that part but i dont know of it matters on whatever version my stock os is on.
Click to expand...
Click to collapse
It does not matter what you have on the internal memory, stock, rooted stock, cm, or any other ROM. It still should work.
Sent from my Nook Color running ICS and Tapatalk
leapinlar said:
It does not matter what you have on the internal memory, stock, rooted stock, cm, or any other ROM. It still should work.
Sent from my Nook Color running ICS and Tapatalk
Click to expand...
Click to collapse
Ok thanks. Im starting the process right now thanks.
I installed the triple boot on
http://forum.xda-developers.com/showthread.php?t=1448186
and it works perfect. Also, it is easy.
feynman.jr said:
I installed the triple boot on
http://forum.xda-developers.com/showthread.php?t=1448186
and it works perfect. Also, it is easy.
Click to expand...
Click to collapse
I also heard of this but i dont want to do this for now since cm9 still is complete. I do have spare sd cards so after this cm7 sd card boot, i might get started on something like this. The instructions are only a bit difficult for me but its cause im new. Anyway thanks.
nook to android
First of all I am unsure of what I am doing. I have a Nook color and want to play the Wheel of Fortune and other Android games. I paid for Wheel of Fortune, but it wouldn't download. It says my Nook is not compatible. What do I need to do?
Crut said:
First of all I am unsure of what I am doing. I have a Nook color and want to play the Wheel of Fortune and other Android games. I paid for Wheel of Fortune, but it wouldn't download. It says my Nook is not compatible. What do I need to do?
Click to expand...
Click to collapse
What rom do you have installed? If its cm7 or other roms it should let you install them and play them.
Hello:
I was thinking about buying a Nook HD+ for my wife. The price is right and it has microSD expansion. But I don't want to use the Nook UI and want to install CM10 instead.
Is this possible with Nook HD+?
Thanks.
-lukin- said:
Hello:
I was thinking about buying a Nook HD+ for my wife. The price is right and it has microSD expansion. But I don't want to use the Nook UI and want to install CM10 instead.
Is this possible with Nook HD+?
Thanks.
Click to expand...
Click to collapse
Yes, there is a thread by verygreen in the development forum for installing CM10 on SD.
Sent from my Nook HD+ running CM10 on Hybrid SD
leapinlar said:
Yes, there is a thread by verygreen in the development forum for installing CM10 on SD.
Sent from my Nook HD+ running CM10 on Hybrid SD
Click to expand...
Click to collapse
Thanks leapinlar. I'll look at his thread. What are your general thoughts are of Nook HD+ with CM10? Do you have any cautions about the post-install experience?
Cheers.
-lukin- said:
Thanks leapinlar. I'll look at his thread. What are your general thoughts are of Nook HD+ with CM10? Do you have any cautions about the post-install experience?
Cheers.
Click to expand...
Click to collapse
I use it as my daily driver. It still has a few minor bugs. I use the 1-08-13 version and it is very stable. Look at his 1-7-13 post to get it.
Sent from my Nook HD+ running CM10 on Hybrid SD
I use for daily CM10.1 on SD. I cant say nothing bad. All things what i had have described on CM10.1 thread too. All apps which one i tested dont had any glitches (believe me, i tested big amount different apps). Only thing is that i dont use bluetooth because i dont have needless. Also wifi have some connection lose problems if wifi ssid is hidden. But this is random.
I'm on CM10.1 because i need different user accounts on one devise.
I'm running Verygreen's 2/12 update and have no trouble or complaints at all. Daily driver all the way. Don't use BT, so I don't know about that. I haven't had reboot problems or anything.
Sent from my JellyBean-Flavored Nook HD+ using Tapatalk 2
so i have a HD+ (don't think this matters) running hybrid, 4/22 10.1 build. there have been some updates to the 10.1 recently, my question is do i need to do anything to back up my current apps/settings before upgrading? will my things still be there after i update?
doesn't seem like it would be, but who knows. thanks
snowlarbear said:
so i have a HD+ (don't think this matters) running hybrid, 4/22 10.1 build. there have been some updates to the 10.1 recently, my question is do i need to do anything to back up my current apps/settings before upgrading? will my things still be there after i update?
doesn't seem like it would be, but who knows. thanks
Click to expand...
Click to collapse
Just flash the new CM zip over the top of the old, all apps will remain.
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
Just flash the new CM zip over the top of the old, all apps will remain.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
Do the latest cm10.1 roms i.e 11/5 and 12/5 work with your Hybrid method? Because I thought I read somewhere in your hybrid thread that they wouldn't work
flying1911 said:
Do the latest cm10.1 roms i.e 11/5 and 12/5 work with your Hybrid method? Because I thought I read somewhere in your hybrid thread that they wouldn't work
Click to expand...
Click to collapse
i saw in the SD install thread that the latest ones (may) are not working with hybrid.
flying1911 said:
Do the latest cm10.1 roms i.e 11/5 and 12/5 work with your Hybrid method? Because I thought I read somewhere in your hybrid thread that they wouldn't work
Click to expand...
Click to collapse
They do not. He used a different ramdisk on those and my ramdisk crashes. I am working on it, but may take a little while.
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
They do not. He used a different ramdisk on those and my ramdisk crashes. I am working on it, but may take a little while.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
update for anyone reading this, leapinlar released the hybrid fix for the newer roms. will give it a try after i clarify how to get a rom with tablet mode enabled.
I did the SD card version of cm10 a few months ago but battery life seems to be awful so was looking at upgrading it to cm10.1.
Have had a good look through the development forum but there isnt much info on actually going from 10 to 10.1, they all seem to be based on starting from scratch.
Wondered if anyone could let me know what files and instructions i need to go from cm10 to cm10.1?
Many thanks
freejack2k
freejack2k said:
I did the SD card version of cm10 a few months ago but battery life seems to be awful so was looking at upgrading it to cm10.1.
Have had a good look through the development forum but there isnt much info on actually going from 10 to 10.1, they all seem to be based on starting from scratch.
Wondered if anyone could let me know what files and instructions i need to go from cm10 to cm10.1?
Many thanks
freejack2k
Click to expand...
Click to collapse
You don't say which device you are using, HD or HD+. If you are running verygreen's old legacy HD+ SD setup, you need to update to his new SD setup. He uses a different SD scheme now that operates much better. So that means you need to start over with the SD. Format it with SDFormatter and then burn his early7.1 image to the SD and follow the rest of his instructions in the thread, including flashing the newer version of gapps. Battery life is much improved.
Sent from my Nook HD+ running CM10.1 on emmc.
Thanks mate
Its the HD+ just checked the build number and its 20121231 so quite old. Will start reading up for n what I need to do.
If anyone could link me to the correct thread I would appreciate it
Thanks
freejack2k said:
Thanks mate
Its the HD+ just checked the build number and its 20121231 so quite old. Will start reading up for n what I need to do.
If anyone could link me to the correct thread I would appreciate it
Thanks
Click to expand...
Click to collapse
Use this thread:
http://forum.xda-developers.com/showthread.php?p=36421852
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
Use this thread:
http://forum.xda-developers.com/showthread.php?p=36421852
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
Thanks mate
Have now done it and got it running however there dosent seem to be a play store app any ideas where i get that and how to install?
freejack2k said:
Thanks mate
Have now done it and got it running however there dosent seem to be a play store app any ideas where i get that and how to install?
Click to expand...
Click to collapse
Did you install gapps-jb-20130301-signed.zip? Get it at goo.im.
Sent from my Nook HD+ running CM10.1 on emmc.
Many thanks for the helpful posts. All now fully installed and working.
Hey guys, Hopefully someone in here can help me figure this out. I was running CM10.1 (from a few months ago) on my nook hd and it was working perfect. It was running off a Sandisk 4gb Class 4 card. Well last night I decided to try for a new version of cm 10.1. I used my Sandisk 16gb Class 10U card and got the latest CM10.1 and latest GAPPS and everything went great. I love it. But I woke up in the middle of the night to see the bright white screen from B & N stuck on 99% and draining my battery. I turned it off and back on and it was fine. Then I woke up a few hours later, and again the same thing. Is this possibly due to the change in SD card or something else. Thanks in advaced.
Jeremy
JeremyD23 said:
Hey guys, Hopefully someone in here can help me figure this out. I was running CM10.1 (from a few months ago) on my nook hd and it was working perfect. It was running off a Sandisk 4gb Class 4 card. Well last night I decided to try for a new version of cm 10.1. I used my Sandisk 16gb Class 10U card and got the latest CM10.1 and latest GAPPS and everything went great. I love it. But I woke up in the middle of the night to see the bright white screen from B & N stuck on 99% and draining my battery. I turned it off and back on and it was fine. Then I woke up a few hours later, and again the same thing. Is this possibly due to the change in SD card or something else. Thanks in advaced.
Jeremy
Click to expand...
Click to collapse
Yes it could be the SD. Since it boots to stock, that means you are running on SD. Whose system? Verygreen or bokbokan? If bokbokan, and not his hybrid, that explains the 99%.
Sent from my Nook HD+ running CM10.1 on emmc.
Yes
It is Bokbokan version....And i'm pretty sure I did not do the hybrid setup....do you suggest I try that out and see what it does. Is Verygreen's version any different/better? and Thanks for your help.
leapinlar said:
Yes it could be the SD. Since it boots to stock, that means you are running on SD. Whose system? Verygreen or bokbokan? If bokbokan, and not his hybrid, that explains the 99%.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
JeremyD23 said:
It is Bokbokan version....And i'm pretty sure I did not do the hybrid setup....do you suggest I try that out and see what it does. Is Verygreen's version any different/better? and Thanks for your help.
Click to expand...
Click to collapse
You definitely need to move to either the hybrid or verygreen's new SD scheme. Both eliminate the 99% problem. And bokbokan's CM10.2 scheme does too.
But it is your SD that is causing the reboot in the first place. The SD is not reliable and the system panics and reboots. With bokbokan's pure system it will hang at 99% when it does.
Edit: But, be warned, the CM10.1 from bokbokan and from verygreen are different. Bokbokan has incorporated different features. And verygreen has stopped updating his.
Sent from my Nook HD+ running CM10.1 on emmc.
Thanks Alot
Hey thanks so much for your help...I will give the hybrid version a shot. You mentioned the CM 10.2. Any feedback on that. Is it worth it right now to try it out or should I wait a little longer to work some bugs out?
leapinlar said:
You definitely need to move to either the hybrid or verygreen's new SD scheme. Both eliminate the 99% problem. And bokbokan's CM10.2 scheme does too.
But it is your SD that is causing the reboot in the first place. The SD is not reliable and the system panics and reboots. With bokbokan's pure system it will hang at 99% when it does.
Edit: But, be warned, the CM10.1 from bokbokan and from verygreen are different. Bokbokan has incorporated different features. And verygreen has stopped updating his.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
JeremyD23 said:
Hey thanks so much for your help...I will give the hybrid version a shot. You mentioned the CM 10.2. Any feedback on that. Is it worth it right now to try it out or should I wait a little longer to work some bugs out?
Click to expand...
Click to collapse
Many like it, but I still run CM10.1.
Sent from my Nook HD+ running CM10.1 on emmc.
quick update
So after trying to decide what the best move was I decided to try emmc method. Being pretty basic with my knowledge I've always been scared to try this. Afraid I was going to mess some this up. But what a difference. I've been missing out. Thanks again for your help and suggestions.
QUOTE=leapinlar;46025405]Many like it, but I still run CM10.1.
Sent from my Nook HD+ running CM10.1 on emmc.[/QUOTE]