[ROM] LiGUX Build -5- \\ JB \\ July 29 \\ Re-Engineered \\ Stable by besttt

[ROM] LiGUX Build -5- \\ JB \\ July 29 \\ Re-Engineered \\ Stable by besttt - Xperia Arc Android Development

Downloads
LiGux for the Xperia Arc/S - Build 5 by besttt
No Google Apps needed (included)
Banner for the fans
Just enter this into your signature:
HTML:
[IMG]http://s14.postimg.org/o46o8e9m9/Banner.jpg[/IMG]
Credits:
coderzs - For the ROM
besttt for fixing the ROM - hit the thanks button in his post in the sixth page
Akateha
Paparigas
FXP and his CM10 builds for the kernel and port base
Mustaavalkosta for the support in all of my developer career (Small one LOL! )
Akateha
Google
CyanogenMod
My family for the support
The XDA community for supporting and answering to all my n00b questions
HTC
Sony Ericsson
Everyone mentioned in the original ROM's thread
The CWM Recovery Project
glevitan for helping me get started with my device
Rizal Lovins
kristiancarl

Reserved for changelog... Enjoy your ROM

What about camera ? Is as good as Stock ics?

DiogoCMartins said:
What about camera ? Is as good as Stock ics?
Click to expand...
Click to collapse
As I said... I don't have an Arc, it would be great if you could test the port and report bugs to me. Thank you

CedArctic said:
As I said... I don't have an Arc, it would be great if you could test the port and report bugs to me. Thank you
Click to expand...
Click to collapse
Ok i download it now and will test ... Can I use this ROM for my second Custom ROM development?
EDIT : Rom doesnt install. set_perm: some changes failed

Same Result here :
set_perm: some changes failed
E:Error in /sdcard/LiGux4.1.2_Port_for_Anzu.zip
(status 7)
Installation aborted.
Click to expand...
Click to collapse

I installed the rom,
but wifi doesnt work, i try the included kernel and the fusion with modules, not working!!! Thats bad cause it looks nice and clean rom.
Dont mind the status7 error, reboot and the rom will start.

parginos said:
I installed the rom,
but wifi doesnt work, i try the included kernel and the fusion with modules, not working!!! Thats bad cause it looks nice and clean rom.
Dont mind the status7 error, reboot and the rom will start.
Click to expand...
Click to collapse
I could fix the Wifi-Error , but my internet is so slow that i could not upload it...
Am i allowed to use this ROM as Base for next Custom ROM?

So Far So Good
Awesome UI & Smooth :good:
Consistent Sim Unlock Screen :bad:
SuperUser Not Working
Will update as I use it more!!

kingserpent said:
Awesome UI & Smooth :good:
Consistent Sim Unlock Screen :bad:
SuperUser Not Working
Will update as I use it more!!
Click to expand...
Click to collapse
Build 3 Uploaded!

CedArctic said:
WiFi-Probably fixed. If you still have wifi problems, install Lupus kernel do a fresh install and flash LuPus WiFi modules and PM me the results. Thank you.
Click to expand...
Click to collapse
u say to flash modules in LuPuS kernel but there are no modules needed to be flash we have to just flash the kernel

kvrjsoni said:
u say to flash modules in LuPuS kernel but there are no modules needed to be flash we have to just flash the kernel
Click to expand...
Click to collapse
I was told that modules had to be flashed... anyways did you test it?

Seems interesting! Going to try

Lord_Snake said:
Seems interesting! Going to try
Click to expand...
Click to collapse
If you have tested it a bug report would be great thanks .

CedArctic said:
If you have tested it a bug report would be great thanks .
Click to expand...
Click to collapse
I'm downloading. Should I use Lupus directly and ignore the kernel on the zip?

Lord_Snake said:
I'm downloading. Should I use Lupus directly and ignore the kernel on the zip?
Click to expand...
Click to collapse
You can try the original kernel and if the wifi does not work make a fresh install with lupus...

Lord_Snake said:
I'm downloading. Should I use Lupus directly and ignore the kernel on the zip?
Click to expand...
Click to collapse
I was not able to install. Got an error:
set_perm: some changes failed
(Status 7)
Installation aborted!

Lord_Snake said:
I was not able to install. Got an error:
set_perm: some changes failed
(Status 7)
Installation aborted!
Click to expand...
Click to collapse
Ignore it... just proceed to boot.

Nope.... i try with lupus, but still no wifi. i dont have connection not even with data usage.
SU works fine with out the fix.

CedArctic said:
Ignore it... just proceed to boot.
Click to expand...
Click to collapse
Yes, strangely, it booted.
parginos said:
Nope.... i try with lupus, but still no wifi. i dont have connection not even with data usage.
SU works fine with out the fix.
Click to expand...
Click to collapse
+1. Wifi does not work... LiGux Blocker force close. LiGux App Weather widget also FC.
Shame, cus the ROM is super snappy and I just love the lockescreen.

Related

[DEV][WIP][ROM][JDQ39E][4.2.2]CyanogenMod 10.1

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CyanogenMod 10.1 is a free, community built, aftermarket firmware distribution of Android 4.2.2 (Jellybean), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Generic source code- http://github.com/cyanogenmod
Device Config- https://github.com/nikhil16242/device_Golfu_cm10.1
Kernel Source - https://github.com/nikhil16242/stock-golfu-kenrel
This is still a WIP , so this is not recommended for daily use.
WHAT WORKS
- Audio
- RIL (As far as i have tested
- Camera(Stills and Panorama)
- Storage (Emmc and Sd card)
- Auto Brightness
- Gps
- Proximity sensor
BUGS
These are the major bugs as far as i have tested.
- Wifi
- Bluetooth
- ADB ( Detects the device as offline)
- Video Recording
- Don't use swype function in keyboard.It will fc
Everything else is untested. Might or might not work
INSTRUCTIONS
Read the instructions carefully before posting
-Reboot To Recovery and copy the Rom zip file
-Do a factory reset
-Flash The Rom
-Flash gapps
-Reboot to bootloader and Flash the kernel (boot.img) Provided with the Rom
-Reboot
-After first boot Go into Settings>About Phone and click Build number about 10 times and you will get the developer options.Disable ADB and re enable it and the device will reboot(Its a bug).After the reboot you will be able to access both internal and external sdcard storage (Just a work around for now)
-The only way to provide me logcats for now is through the terminal emulator.Open it and type
Code:
su
logcat > /sdcard/logcat1.txt
Just let it run in the background and provide me logcats if you encounter bugs other than that listed in OP. Please Dont report bugs without logcat.
CREDITS
- Whole Cyanogenmod Development Team
- The XDA team
- @sakindia123 for his work on cm10.1 for htc explorer
- @cute_prince for bringing cm10 to our device and always being helpfull :good:
- @dominos_liberty for showing interest in our device and starting the initial developement
- Anyone I have missed.
Link To Build #1 : http://d-h.st/Eqf
Gapps : http://goo.im/gapps/gapps-jb-20130301-signed.zip

Screen Shots

I start the download

saider said:
I start the download
Click to expand...
Click to collapse
Dont forget to follow the instructions given properly before flashing

nikhil16242 said:
Dont forget to follow the instructions given properly before flashing
Click to expand...
Click to collapse
of course

Hey nik, i managed to boot the rom with CM10 kernel, is there any difference? And if so, would you mind me using your source code to OC the kernel for cm 10.1?

me4488 said:
Hey nik, i managed to boot the rom with CM10 kernel, is there any difference? And if so, would you mind me using your source code to OC the kernel for cm 10.1?
Click to expand...
Click to collapse
If you boot it with cm10 kernel ril wont work. I will upload the kernel sources by today.

nikhil16242 said:
If you boot it with cm10 kernel ril wont work. I will upload the kernel sources by today.
Click to expand...
Click to collapse
i don't understand it really well so i followed your instructons rom boots and i go to settings and click build number 10 times then i go to developer options and adb is already disabled when enabling no reboot?
EDIT: had to do it a few times now it rebooted and external storage working (i tried using apollo and it's very unstable)
EDIT2: we really need OC now we see 4.2.2 doesn't run that well on out device

noahvt said:
i don't understand it really well so i followed your instructons rom boots and i go to settings and click build number 10 times then i go to developer options and adb is already disabled when enabling no reboot?
EDIT: had to do it a few times now it rebooted and external storage working (i tried using apollo and it's very unstable)
EDIT2: we really need OC now we see 4.2.2 doesn't run that well on out device
Click to expand...
Click to collapse
Enable it , then disable it again. You will have a reboot.

nikhil16242 said:
Enable it , then disable it again. You will have a reboot.
Click to expand...
Click to collapse
it rebooted
EDIT: what is RIL exactly? is it important?

error install apps

this is a great rom but one thing i miss adb we really need a fix for that!

noahvt said:
this is a great rom but one thing i miss adb we really need a fix for that!
Click to expand...
Click to collapse
you have installed the application?

saider said:
error install apps
Click to expand...
Click to collapse
Yes I know.This is a WIP (its just my 2nd build) . Its not meant for daily use for now.
noahvt said:
this is a great rom but one thing i miss adb we really need a fix for that!
Click to expand...
Click to collapse
I will try to fix most of these bugs in future releases.

saider said:
you have installed the application?
Click to expand...
Click to collapse
nah when installing an app it says: app not installed!

nikhil16242 said:
Yes I know.This is a WIP (its just my 2nd build) . Its not meant for daily use for now.
I will try to fix most of these bugs in future releases.
Click to expand...
Click to collapse
When you are able to fix the installation of applications?

saider said:
When you are able to fix the installation of applications?
Click to expand...
Click to collapse
Yesterday you had no cm10.1 , just a thread full of bickering .
Today you have cm10.1 .
Be happy it's getting built and stop asking for finish times.
If I know nik he is working hard on this and it will get fixed asap
So glad to see you on this nik :good:

whoamigriffiths said:
Yesterday you had no cm10.1 , just a thread full of bickering .
Today you have cm10.1 .
Be happy it's getting built and stop asking for finish times.
If I know nik he is working hard on this and it will get fixed asap
So glad to see you on this nik :good:
Click to expand...
Click to collapse
okay

Try using the wifi fix for CM 10 and then compiling the kernel.

noahvt said:
EDIT2: we really need OC now we see 4.2.2 doesn't run that well on out device
Click to expand...
Click to collapse
Hehe 4.2.2 is a big old beast . We are deffo gonna need a big ass oc ;p
I think if you havn't used 4.2.2 before you are going to end up a little deflated once you get it . It's not the all singing and dancing update that cm10 was to our phone.
And I wouldn't be suprised in the least that it will be slower.
Oh and nik and other devs . not sure on cwm but deffo on twrp , i think 2.4+ was needed as it fixed a bug where backups were spawning everywhere. It was to do with the way google made JB to accommodate multiple profiles . It's deffinately something to be aware of as when it was launched there were all sorts of problems on the forums because of multiple spawning of backups

[ROM][MIUI V5][4.2] MIUIAndroid + MIUI.com PatchROM

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
MIUIAndroid for LG Optimus 4X HD
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
I'M NOT THE DEVELOPER! I JUST MADE A THREAD FOR THIS ROM.
Informations:
* CyanogenMod 10.1 as base
* multilang
* updates every week
* no sh*tty bloatware etc., just MIUI!
Installation:
* reboot to recovery
* if you're on another system for now, wipe data/cache, dalvik cache and system
* install .zip with MIUI and reboot
* after booting return to recovery and install language pack (if u have any), if not, u can now install MIUI gapps.
* READY!
Download:
All downloads you can find HERE and HERE.
Thanks:
MIUI
MIUIAndroid
CyanogenMod
Other people i don't know who to thank D:[/SIZE]
Gallery:
* http://miuipolska.pl/galeria-miui-v5/
_______________________________________________________________________________________________________________________
You guys also have a PatchROM made by @gtbluesky, download is on MIUI.COM:
CLICK ME

This is official version ?
Because official is on miui website http://www.miui.com/download-79.html

thanks, hope they will fix the lagging problem on this rom cuz I really Like it..

king123321 said:
thanks, hope they will fix the lagging problem on this rom cuz I really Like it..
Click to expand...
Click to collapse
freeze some unnecessary apps (i'm using ROM Toolbox and Autostarts) and flash iodak kernel - it will be better! remember, it's the first build, it's normal it lags
btw, 4.3 gallery/camera with photosphere is working great here!

yeah but why it is based on 4.1 ? great work of course! but we already have Cyanogenmod 10.1

reas0n said:
freeze some unnecessary apps (i'm using ROM Toolbox and Autostarts) and flash iodak kernel - it will be better! remember, it's the first build, it's normal it lags
btw, 4.3 gallery/camera with photosphere is working great here!
Click to expand...
Click to collapse
Good Job @reas0n I have found the follwoing link for langauge pack there is nothing about our device I am downloading for SGS III. It might work or not so try it your own risk ( correct me if I am mistaking)
http://miuiandroid.com/community/threads/miui-v5-multi-lang-3-4-5.20007/
Regards

sPEADy said:
Good Job @reas0n I have found the follwoing link for langauge pack there is nothing about our device I am downloading for SGS III. It might work or not so try it your own risk ( correct me if I am mistaking)
http://miuiandroid.com/community/threads/miui-v5-multi-lang-3-4-5.20007/
Regards
Click to expand...
Click to collapse
it's not this version of MIUI. well, there are languages for a lot of phones (releases>number of version>multi_lang) but for now i can't find ours..
http://goo.im/devs/ibotpeaches/miuiandroid/releases/

now i try iodak kernel..
but miui for me is stable as daily..also battery is great...
I think that maybe OP can add as add-on Xylon Framework animations that i try and work perfectly..
This is the link for MIUI..
Xylon Addon Framework Animations : download http://d-h.st/0nD
Preview Animations http://en.miui.com/thread-3478-1-1.html
remember : backup system firstly..

Whats the difference between this one and version on MIUI webpage ?

differences
http://miuiandroid.com/community/threads/how-is-this-different-than-miui-com.18629/

Ok thank you Just flashed this rom with iodak v7 MIUI kernel everything works except autobrightness (it is too dark )....

reas0n said:
Kernels:
*for now only one custom kernel is compatible with official MIUIAndroid and it's iodak kernel.
Click to expand...
Click to collapse
so what's the problem? ramdisk or kernel itself?
if you can tell me the problem, i can make my kernel compatible, too

laufersteppenwolf said:
so what's the problem? ramdisk or kernel itself?
if you can tell me the problem, i can make my kernel compatible, too
Click to expand...
Click to collapse
i think ramdisk..
same problem was on my hd2 and miui for custom kernel..
first kernel of first miui release was on your kernel too..
in iodak thread there is miui boot.img if you want extract ramdisk and check
@dimi89
for autobrightness use Velis Auto brightness..set it as preset TFT LCD bright..
Auto brightness works very well with it

zicoxx said:
i think ramdisk..
same problem was on my hd2 and miui for custom kernel..
first kernel of first miui release was on your kernel too..
in iodak thread there is miui boot.img if you want extract ramdisk and check
@dimi89
for autobrightness use Velis Auto brightness..set it as preset TFT LCD bright..
Auto brightness works very well with it
Click to expand...
Click to collapse
that's what i thought, too so here's a testverion with the MIUI ramdisk.
it's neither v006, nor v007, it is a test version, but should run completely stable
test and report back please

laufersteppenwolf said:
that's what i thought, too so here's a testverion with the MIUI ramdisk.
it's neither v006, nor v007, it is a test version, but should run completely stable
test and report back please
Click to expand...
Click to collapse
Yes it boots too..and work very well..
i test it deeply and report for battery drain and other things..
EDIT : Wifi don't work..data works well also gps..but wifi no..
for frequencies : works very good,stable and device smooth..

Sorry i dont get it, is this an official Rom from the miui developers or is it just another port? If yes, how smooth is it?

forgottnxd said:
Sorry i dont get it, is this an official Rom from the miui developers or is it just another port? If yes, how smooth is it?
Click to expand...
Click to collapse
yes it's smooth but there is also some lags..
but this is the first beta release and by some days i use daily without problem..
Now with custom kernel (iodak and laufersteppenwolf) i think that roms works great too..
However try,test,and report your experience..

forgottnxd said:
Sorry i dont get it, is this an official Rom from the miui developers or is it just another port? If yes, how smooth is it?
Click to expand...
Click to collapse
interface is lagging a little, but anyway it's very nice and without bugs. MIUIAndroid is the biggest support community except MIUI, they have better source, less bloatware, more tweaks and translations.

zicoxx said:
Yes it boots too..and work very well..
i test it deeply and report for battery drain and other things..
EDIT : Wifi don't work..data works well also gps..but wifi no..
for frequencies : works very good,stable and device smooth..
Click to expand...
Click to collapse
ohh, damn, that could be a problem of the test kernel... expect a fix in the evening

@zicoxx just downlaoded Velis Auto Brightness set it up (LCD Bright) rest on medium and normal and turned autobrightness in MIUI options but it isnt working my screen just go to dim state,same as on ice cold jelly rom
This MIUI is good since it have LG camera and not stock one (for me LG camera is better then stock android one)

[ANDROID 4.3][ParanoidAndroid][ROM][AUG17] I9300 UNOFFICIAL Builds - V3.97

Build / Changelog / Old Builds
We give you 2 ROMs:
(1) Clean PA Source Build
(2) Modded PA Source Build with some cool extra Stuff inside
NEW CLEAN BUILD: 3.97 - 17/08/2013
Click to expand...
Click to collapse
pa_i9300-3.97-20130817.zip (by dschense)
md5sum: a595444fa6222675e5d290817803e6a4
Changelog:
Click to expand...
Click to collapse
For Changelog, pls look at our G+ Community
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
NEW MODDED BUILD: 3.97 - 17/08/2013
Click to expand...
Click to collapse
pa_i9300-3.97-20130817.zip (by abun880007)
md5sum: not available
Changelog:
Click to expand...
Click to collapse
For Changelog, pls look at our G+ Community
Mirrors:
Click to expand...
Click to collapse
MEGA - CLOUD
Abun880007.co.uk
Sammy2014.co.uk

-RESERVED--

Oooo... new 4.3 rom... Nice!

Yeah!!!! Nice one! Downloading now!!!
Enviado desde mi GT-I9300 usando Tapatalk 4

thanks changelog? thanks

i have not finished the thread u have to wait for changelog

dschense said:
i have not finished the thread u have to wait for changelog
Click to expand...
Click to collapse
sorry but is much time i wait for new paranoidandroid...thanks for work:good: and hope work

Mods made to build coming soon

The ROM bootloops for me

daanismyname said:
The ROM bootloops for me
Click to expand...
Click to collapse
did you do fullwipe before flashing the rom ? we tested the zip on 3 devices before releasing to public.. no problems at all..

dschense said:
did you do fullwipe before flashing the rom ? we tested the zip on 3 devices before releasing to public.. no problems at all..
Click to expand...
Click to collapse
I came from Chronos ROM, I always clear cache + dvk cache, erase system partition, factory reset before flashing a new ROM. When I flashed this ROM it did not come further than the PA bootscreen, not even after 15 minutes.

daanismyname said:
I came from Chronos ROM, I always clear cache + dvk cache, erase system partition, factory reset before flashing a new ROM. When I flashed this ROM it did not come further than the PA bootscreen, not even after 15 minutes.
Click to expand...
Click to collapse
are you shure you try to flash on the Samsung Galaxy S3 i9300 International?

dschense said:
are you shure you try to flash on the Samsung Galaxy S3 i9300 International?
Click to expand...
Click to collapse
Yes, every other ROM just flashes normally. I will try to redownload the ROM and try again, I'll post here if that worked.

OK, must be bad download all working fine for other users and devs
Sent from my GT-I9300 using Tapatalk 4

The issue is the download link. My download from your sites consistently end when the file reaches around the 40mb mark when that is clearly not complete. Had to try various times. Now have to try it out with a download manager. His download was probably equally as corrupted.
Mind adding mirrors? 'Cause this is a consistent issue when downloading files from your site.

Uploading the build to mega cloud for people with problems downloading from abun site..
Gesendet von meinem GT-I9300 mit Tapatalk 4

On installing CWM gives the warning "No file-contexts". It is still booting though so I'm not sure if it'll work now.
EDIT: After 3 flashes it works! I'm going to test out the ROM

Clean install and everything works sofar
But i mis theme engine
Sent from my GT-I9300 using xda premium

3.94 - 08/07/2013
https://mega.co.nz/#!NAJSAaJT!0bMXWd-x6fEWLe_jE-W3hfnZFcI_LaWXDfVrYPKWAAg
Theme engine is still broken.. Also on official pa nexus builds.. Maybe they get it fixed.. Stay tuned.
Kaaaaaaaaaaaatsching

[ROM][SM-T211] Infamous Tab 3 GSM | V1.0 | Sept 16, 2013

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Welcome to Infamous Tab3 GSM
Brought to you by @Jamison904RULES:
Before you start using this rom here are some things you need to know:
1. I am NOT updating every day (I work 6 days a week and have a 2 year old daughter and Pregnant wife)...
2. Don't ask for ETA, this is rude and offensive. When it is done it is done.
3. Custom Roms come without warranty. They are tested before release but something always can go bad. So if you broke your phone or you got fired because the alarm didn't go off - I am not responsible.
4. Support is limited. Sometimes I can answer your questions sometimes I don't have the time. There will be times I don't have an answer so please do no repeat your question or get offended because I haven't answered you.
5. Don't compare ROMs. It is rude and offensive for developers. *If the other rom has what you need, use that ROM.
6. Don't Kang my work. You may fool everyone else but I will know! If you want to use something just ask!
7. If you like my work, a five star thread rating and hitting the thanks button motivates me.
8. No flaming! We have all been a NoOb before. We are here to help each other.
9. Read the change log. All relevant important information is there first! i.e. Bugs and fixes if there are any at the time.
10. Read and follow the how to install.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
By using the rom you agree with the above terms!

HOW TO INSTALL:
Download ROM and place on SD
Reboot into recovery
Wipe unless change log say otherwise *
Install the ROM
Reboot out of recovery
Skip setup wizard (you can put your name in)
wait five minutes for all to settle as this is a highly tweaked ROM and Kernel (soon)
Reboot
Additional install info:
Now install Xposed. The installer app comes with the ROM. Open it and click install. Don't reboot yet. Hit the tab above that says modules and turn on the modules you want to use... now reboot.
Driver for Viper4ANDROID = CortexA8 with NEON
Click to expand...
Click to collapse
About:
[*] Offical JZO54K.T211ZSAMI3
[*]Busybox
[*]Rooted
[*]Deodexed
[*]Zipaligned
[*]Zipalign on boot script
[*]Sysro/sysrw
[*]App/data Support
[*]Init.d Scripts
[*]AOSP 4.2 Keyboard
[*]Faster SD Card read/write
[*]Nova 2.0
[*]Removed Ads
[*]Updated SU binary
[*]Menu to kill current app/process
[*]Xposed installer
[*]XthemeEngine beta 5
[*]Trickster MOD
[*]InfamousAPKboost script
[*]V6 Supercharger Script! Thanks to zepplinrox!Read here
* *Also included the scripts under *system/xbin/scripts so you can modify to your preference:
[*]Die-Hard_Battery_Calibrator_RC5 (because stock the battery isn't read correctly)
[*]Die-Hard_Battery_Calibrator_RC5
[*]V6_SuperCharger_for_Android-Update9_RC11_Test_9
[*] Much more coming!!
Click to expand...
Click to collapse
Known issues:
- None at this time.
Found a bug?
Pull a log to help me help you
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Donate to Jamison904


210 users grab the stock kernel zip below.

saved. . . . . .

one more....

Lol
Sent from my SAMSUNG-SGH-I747 using Tapatalk 4

And again anyone is welcome to use this as a base and build a ROM on it. Check the link in my signature to my how to's. Or the new Infamous tools app that comes with the ROM.
Download link is live. Please give feed back. Flashed on my 210 but not sure if 3G works as I don't have the 211. Thanks

Have you already integrated more languages ?

This should support a bunch of languages as it is a Euro firmware.

Jamison904 said:
This should support a bunch of languages as it is a Euro firmware.
Click to expand...
Click to collapse
That sounds great ! As you tested the rom already on your 210R do you think i can flash it on my 210 without R
and test it ?
Are there any different features than in the Infamous 1.1 for 210 ?

It would work for your 210. Just keep in mind it is built for 3G so you will have a few things FC like the phone app. There aren't any new features yet this is the first built and more of a base that I will build on.

Ok will download flash and report. As long as wifi is working i am fine.
Can't wait to see multiple langauges in Infamous for T210.
One more question: have you tried to get Viper4Android working on the 210 ?
I cant get it to work, no matter what driver or settings i use.

batman08 said:
Ok will download flash and report. As long as wifi is working i am fine.
Can't wait to see multiple langauges in Infamous for T210.
One more question: have you tried to get Viper4Android working on the 210 ?
I cant get it to work, no matter what driver or settings i use.
Click to expand...
Click to collapse
It is working on my t210r. Use a9with neon. Then activate settings I choose r&b for the preset and everything is good. Make sure that it is on the tab. I am using headpones not my speaker
Sent from my SM-T210R using xda app-developers app

Testing the GSM Rom on a t210: WLAN & Bluetooth not working
says: is activating, but nothing happens

n14sound said:
Testing the GSM Rom on a t210: WLAN & Bluetooth not working
says: is activating, but nothing happens
Click to expand...
Click to collapse
...same for me. Wlan and bluetooth not working on t210.

batman08 said:
...same for me. Wlan and bluetooth not working on t210.
Click to expand...
Click to collapse
And this are killing features

working on T211 initially. No bugs so far.

n14sound said:
Testing the GSM Rom on a t210: WLAN & Bluetooth not working
says: is activating, but nothing happens
Click to expand...
Click to collapse
Flash this stock 210 kernel. It is in the download post - Download link

Jamison904 said:
Flash this stock 210 kernel. It is in the download post - Download link
Click to expand...
Click to collapse
Wifi and BT still not working with stock kernel....

@ Jamison904
In OP you tell:
"HOW TO INSTALL:
•Download ROM and place on SD
•Reboot into recovery
•Wipe unless change log say otherwise *
•Install the ROM
•Reboot out of recovery
•Skip setup wizard (you can put your name in)
•wait five minutes for all to settle as this is a highly tweaked ROM and Kernel (soon)
•Reboot"
Can this be done with stock recovery?
I was not been able to install on my SM-211 CWM recovery.
Thank you.

muntinlupa said:
working on T211 initially. No bugs so far.
Click to expand...
Click to collapse
Can you please tell me/us how you installed it? Which recovery did you use? (I haven't found a working recovery)

* delete me

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Read 1st And 2nd Post Carefully And See Changelog On 2nd POST
Please Visit Website For More Information
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device
* I will laugh at you. Hard. A lot
Click to expand...
Click to collapse
LIGHTNING SPEED!!!
FEATURES
+ PIE Control
+ Multiwindow
+ Floating Window
+ Active Display
+ Dolby Mobile
+ OTA Update(Need Changes)
++ Much More Coming In Next Version
To sum this up it's essentially CM with all of the speed optimizations and goodies we use because we like our ROMs fast!!!
ScreenShots
Install instructions
** Do not use simple CWM, Use Philz Touch Recoversy
1. Download ROM+Gapps to sdcard
2. Reboot into recovery
3. Wipe Cahe/dalvik Cache
4. Format Data/ System
5. Clean To Install New ROM(Philz)
6. Flash ROM Then Gapps
7. Reboot and Enjoy!
8. Rate this thread 5 star + Thank Me + Buy me beer
Downloads
Stable V3
MD5 :322b748d2a1ff0a4645f240eaf83ffbb
GaPPs - UPDATED
MD5 : 9af17303ce0ab168b2d7ba9e88ab2a1c
Thanks to:
- Dolby Mobile App - http://forum.xda-developers.com/showthread.php?t=1335679
-PIE Control - http://forum.xda-developers.com/showthread.php?t=2454531
- CyanogenMod For CM11
- Samsung For Device
- Google For Android
- @Vishesh For Helping Me Issues
- @fooiskandar For Providing Screenies And Reviews.
- Anyone else I forgot
How to Enable ART
(Note that ART is experimental at this point)
Go to Settings, Developer Options, Select Runtime and choose Use ART.
If prompted with a CyanogenMod disclaimer pop-up, tap OK to proceed with the ART conversion.
System will reboot. The reboot (including "Optimizing Apps") will take a LONG time as the system
converts to ART, so be patient
Source
Kernel Source CM
XDAevDB Information
[★ROM★][★4.4.2★][★P-3100★]★Lightning Speed Stable V3★[★PIE★][★MULTI-WINDOW★][★DOLBY★]
Version Information
Status: Stable.
For Any Queries WhatsApp Me : +919586999937
User Feedbacks
1) fooiskandar
Nicer rom
Sent from my GT-P3100 using XDA Premium 4 mobile app
2) lokesh.3440
I have tried you first Experimental version,,,i works really great with NEXT kernal,,,,waiting for more features,,,,,,thanks for your contribution in our Tab 2 family.,....
+ everything works
+ Animations are really fast
+ Integration with next kernel is awesome.
+ Eagerly waiting for other features like HALO or multi-window........
3) Bhaskara Rao
I am a lay user. I have Next Dual kernel with Omni Homemade ROM on first Boot. Flashed this ROM on second Boot with Next kernel.
kudos !
This is fast and fluid. No FCs. working fine.
Camara, audio and video playbacks are fine.
I shall use a couple of days and report
OTA update is showing error.
4) lokesh.3440
This is my feedback for V2 :
1) superb stable and very-very fast
2) pie control works flawlessly
3) multi-window works good as well
Keep up the good work,,
5) sim_tcr
Here is my review on Lightning Speed Stable V3.
Wipe Data/Fact Reset, Cleared Cache and Dalvik, Formatted data, cache, system, SDCARD and Flashed V3 and gapps through CWM 6.0.4.5.
1) Booted Fine.
2) Initial Setup worked without issues.
3) No FCs (very important)
4) 3g and Wi-Fi hotspot worked.
5) Active Display Worked great.
6) Camera worked. (have the option of setting the location as internal/sdcard. Nice.)
7) Floating Multi Windows Worked great.(needed to install xposed framework from http://forum.xda-developers.com/show....php?t=1574401) Bubble launcher say's will expire in 10 days. May have to setup app bar via xblast tools.
8) Pie Control worked great.
Screen recorder is missing.
Overall nice ROM.

CHANGELOG
CHANGELOG
Stable V3
+ Added Active Display
+ Added Dolby Mobile
Stable V2
+ Added PIE Control
+ Added Multi Window
+ Added Floating Window
+ OTA Update Included
+ Many More In Next Version
Stable V1
+ Minor Bugs Fixed
+ Few Changes In Build.prop
+ Powered By AGNI Kernel (Recommended)
Experimental Version
+ Initial Release
Click to expand...
Click to collapse

Waiting for download link ...
don't forget to HIT THANKS BUTTON !!!

fooiskandar said:
Waiting for download link ...
don't forget to HIT THANKS BUTTON !!!
Click to expand...
Click to collapse
Upload in progress Download Link will be available within 30 mins.

i hope pie will included later
screenshoot also please
i would be happy to try this of course, thanks dev

150208 said:
i hope pie will included later
screenshoot also please
i would be happy to try this of course, thanks dev
Click to expand...
Click to collapse
It's Just A Experimental Version, So Much More Coming When It's Going Stable, But Remember Because It's Experimental Use At Your OWN Risk..

Link is LIVE, Waiting for Suggestions and Replies...

Can anyone tell me that is there errors in installation or installed???

I am still waiting for replies from you guys....

If its working then please attach screenshots. And if its not working then please attach ERROR LOG so i can solve the problems...:cyclops:

Unable to flash.
Set perm failed during installation tried on philz touch 6.12.8 and twrp 2.6.3.6.

antutu said:
Unable to flash.
Set perm failed during installation tried on philz touch 6.12.8 and twrp 2.6.3.6.
Click to expand...
Click to collapse
I thought Same, Need to rebuild with another source. Will be running on our device within 5-6 Hours. :angel:
Thanks for replying and telling the issue...

I'll give you the super smooth and Speedy ROM ever made for Tab2. that's my promise...

Please do not download NOW. i'll tell you when to download. Don't waste your bandwidth..

pranavaryans said:
I'll give you the super smooth and Speedy ROM ever made for Tab2. that's my promise...
Click to expand...
Click to collapse
Brother firstly big congratulations for ur first rom..
Secondly, don't take me wrong, but u should try ur rom first before proceeding, weather it's working or not.. Else no one will respect u n take ur work seriously.. Bugs r normal but it should bootable at least.. U must created the thread thereafter only..
I hope u will come with a bang.. Lots f good wishes for u..
Regards
Vishesh
¶Help must be Thanked¶

Vishesh said:
Brother firstly big congratulations for ur first rom..
Secondly, don't take me wrong, but u should try ur rom first before proceeding, weather it's working or not.. Else no one will respect u n take ur work seriously.. Bugs r normal but it should bootable at least.. U must created the thread thereafter only..
I hope u will come with a bang.. Lots f good wishes for u..
Regards
Vishesh
¶Help must be Thanked¶
Click to expand...
Click to collapse
Thanks Vishesh, You speak truth. I was in hurry and did a mistake to post it before booting. But i'll upload another version soon and it will boot. Thanks Again...

replace update-binary fixes it?

Android-Andi said:
replace update-binary fixes it?
Click to expand...
Click to collapse
it will fix it, and if not we should make changes in Updater Script. Coz its Set_Perm Status 7...
EDIT -> Try to replace update binary and tell me what happens. thanks in advance...

Finally Its Booting Up, Uploading Soon The New Version....:laugh:

Uploading the new version Now, It's just a simple CM based no other features right now, but features will be added when it becomes more stable. Hope you all will like it..

Database Develop

welcome