Galaxy Ace Hardbricked? - Galaxy Ace S5830 Q&A, Help & Troubleshooting

The other day i installed the SGS3 V4 rom on my s5830 (only realised after that it was made for s5830i -.-) and now i just have a permanent black screen, no backlight or anything, nothing appears when i plug the charger in and it wont boot into download or recovery mode the only way i can get some life out of it is if i plug the usb cable in then hold Vol up + Vol down + Home + Power as i put the battery in, then my computer shows that a device has been recognised and a yellow rectangle appears in odin but whenever i try to flash the stock rom it just hangs on '<1> setup connection...'
Ive also tried using a usb jig but it doesnt do anything unless im not using it properly.
anyone found a solution? Im now stuck with my blackberry again and i cant stand it

JarHeadP said:
The other day i installed the SGS3 V4 rom on my s5830 (only realised after that it was made for s5830i -.-) and now i just have a permanent black screen, no backlight or anything, nothing appears when i plug the charger in and it wont boot into download or recovery mode the only way i can get some life out of it is if i plug the usb cable in then hold Vol up + Vol down + Home + Power as i put the battery in, then my computer shows that a device has been recognised and a yellow rectangle appears in odin but whenever i try to flash the stock rom it just hangs on ' setup connection...'
Ive also tried using a usb jig but it doesnt do anything unless im not using it properly.
anyone found a solution? Im now stuck with my blackberry again and i cant stand it
Click to expand...
Click to collapse
try this
Open odin & install phone drivers.
1. Connect phone to pc.
2. Remove battery.
3. Press Download mode combo keys.
4. Re-insert the battery while holding those keys.
5. Odin'll now detect ur phone.
6. Flash the stock firmware.
hope that i helped
be careful next time

nizar.nasani said:
try this
Open odin & install phone drivers.
1. Connect phone to pc.
2. Remove battery.
3. Press Download mode combo keys.
4. Re-insert the battery while holding those keys.
5. Odin'll now detect ur phone.
6. Flash the stock firmware.
hope that i helped
be careful next time
Click to expand...
Click to collapse
Thank you for your suggestion, but ive already tried this and it doesnt work the only way my computer will detect it is if i hold all the buttons down at once other than that nothing works

JarHeadP said:
The other day i installed the SGS3 V4 rom on my s5830 (only realised after that it was made for s5830i -.-) and now i just have a permanent black screen, no backlight or anything, nothing appears when i plug the charger in and it wont boot into download or recovery mode the only way i can get some life out of it is if i plug the usb cable in then hold Vol up + Vol down + Home + Power as i put the battery in, then my computer shows that a device has been recognised and a yellow rectangle appears in odin but whenever i try to flash the stock rom it just hangs on '<1> setup connection...'
Ive also tried using a usb jig but it doesnt do anything unless im not using it properly.
anyone found a solution? Im now stuck with my blackberry again and i cant stand it
Click to expand...
Click to collapse
hi i have this problem to pass this step whit <1> setup connection... but i tried whit this package and for me work try this one : http://hotfile.com/dl/132813733/c5eee3c/S5830XXKPH_bysamsdroid.rar.html

geo95cornel said:
hi i have this problem to pass this step whit <1> setup connection... but i tried whit this package and for me work try this one : http://hotfile.com/dl/132813733/c5eee3c/S5830XXKPH_bysamsdroid.rar.html
Click to expand...
Click to collapse
Still wont work :\ also with this it hardly ever detects my ace

Related

[Q] Phone will not power on after failed Odin restore

I decided to upgrade to Cog2.2beta5 from Cog2.1.4 today using ROM Manager. Everything seemed to go well but after install and reboot all I got was a black screen and subsequent reboots landed me at the same result.
So I thought restoring back to stock with Odin One Click from this forum, the one with all the ROM files built right in, was the best next step. I downloaded Odin and followed the instruction to the T and it got stuck at the PIT step. After a few attempts at it now my phone won't even power on. I've let it sit without a battery in for several minutes and even charged it on a wall charger for 30 minutes just to make sure it wasn't a dead battery. Still won't power on or respond at all.
I'm fairly new to all of this... Any ideas on what would cause a total melt down of the phone to the point of not even powering on? It has been flawless for me since launch.
Didi you download the drivers? also did you unplug the phone while doing the flash>/
pull battery sim and sd if you have one
Wait a minutes or so
plug in USB
hold vol up and down
put in battery
If the phone does not immediately go to download mode, you have a fancy paper weight that doesn't even weigh that much.
chibixzero said:
Didi you download the drivers? also did you unplug the phone while doing the flash>/
Click to expand...
Click to collapse
I did download the drivers and from everything I could see, my system and Odin recognized the phone without issue.
I had to unplug it during the process because the process froze in the same spot for well over an hour. I didn't see any other choice.
l7777 said:
pull battery sim and sd if you have one
Wait a minutes or so
plug in USB
hold vol up and down
put in battery
If the phone does not immediately go to download mode, you have a fancy paper weight that doesn't even weigh that much.
Click to expand...
Click to collapse
Guess it's a paper weight then because the phone won't power up at all let alone go into download mode.
Thanks for your time guys.
sounds like you might have done exactly what i did with my first captivate and yes it IS bricked! i know you will read "its impossible" to do that but i "thought" i followed the correct steps and flashed only a pit file. what it does is repartition your file system but apparently nothing is added after that...
not sure what steps you took on odin but it sounds like you got the same error i did and then the same issue so im going to assume the same thing has happened here...sorry matey
tnt533 said:
Guess it's a paper weight then because the phone won't power up at all let alone go into download mode.
Thanks for your time guys.
Click to expand...
Click to collapse
I had mine hosed for a while and this is what I did to get it back.
When it is unplugged and everything is out of the phone (sd, sim, batt) , hold the power button down for 10 sec, then release.
Put in battery, hold vol up + vol dwn, Plug into different usb port, Plug into phone.
That should get you into download mode
Mine did this too and the steps mentioned fixed it for me
Sent from my SAMSUNG-SGH-I897 using XDA App
I too accidently only wrote the pit file and it wouldn't do anything at all just blank screen . Make sure you remove everything open Odin one click, plug in your phone with the USB cable, hold down volume up and down and plug in battery it should start in download mode. It does work.
Sent from my SAMSUNG-SGH-I897 using XDA App
samsung captivate wont turn on after failed odin update
got an at&t samsung captivate. I want to try on something new with this phone so I search on some articles on how change rom..
first got the download mode showing on my phone then i connect it to pc with odin3 already started, I click on start button however my phone just suddenly shut off. tried turning it on but nothing happens. tried 3 key combos still wont turn on, tried removing sim, sd and batt connect phone without batt then pushing vol up and down then inserting batt still nothing. tried charging it, no light came up, still wont turn on..i would like to ask some help if how to turn my phone back on..
sorry for bad English
thank you
boangon said:
got an at&t samsung captivate. I want to try on something new with this phone so I search on some articles on how change rom..
first got the download mode showing on my phone then i connect it to pc with odin3 already started, I click on start button however my phone just suddenly shut off. tried turning it on but nothing happens. tried 3 key combos still wont turn on, tried removing sim, sd and batt connect phone without batt then pushing vol up and down then inserting batt still nothing. tried charging it, no light came up, still wont turn on..i would like to ask some help if how to turn my phone back on..
sorry for bad English
thank you
Click to expand...
Click to collapse
What did you try to flash with Odin? (with version, variant #, with/without bootloaders)
What was the Odin log?
nothing, no roms yet. i was in the first part of the instruction. this is what i follow
1. Download and install the correct drivers below (mac and linux don't need drivers)
2. Plug in your usb cable to your phone and computer
3. Open Odin
4. Enter Download Mode (see below)
5. Click Start
6. Be Patient, the first boot will take a while
where can i find the odin logs?

[Q] Stuck in AT&T Screen boot loop, can't get into either recovery or download mode

[Q] Stuck in AT&T Screen boot loop, can't get into either recovery or download mode
I went back to stock (or tried to) and after Odin was done the phone just stuck in the AT&T boot loop, download mode is not working (it was working before so I know I am doing the right combination/timing) doing endless combinations of Vol-/Vol+/Power doesn't seem to get me into recovery mode-
I put my girlfriend's captivate on Continuum over the weekend so I'm sure I'm pressing the right keys to get into download mode, but I get nothing but the battery.
I do have the Android SDK in my computer but I'm never able to get past that naggy screen, so I can't do a 'adb shell reboot recovery' is a JIG my only option?
To recap, can't get into download mode and pressing volume up / volume down and power buttonuntil the AT&T screen and then release the power button doesn't get me into recovery mode.
Need help!
I've been in the exact same situation.A jig is most probably the only option.
Many people have had this problem and find that a jig is the answer.
Sent from my cappy UC'd 900mhz and UV'd running di11is rom/ Onix kernel
first try with just holding vol buttons and then inserting USB cable...hold vol buttons till its goes into download mode or the screen changes..if not then try following steps...
1. remove the usb cable, battery, sdcard, SIM.
2. wait 10 seconds, then insert the USB cable.
3. press and hold the 3 button combo while you insert the battery
4. continue to hold until phone's screen goes black twice and release power button.
5. timing is critical, it may not work the first time. Keep going until you see the COM port is connected properly.
still no Dl mode..then buy a jig or make one yourself
Right so I'm download mode now, but every time I go back to STOCK I'm re-stuck in the same loop, seems that I can't get out of it.
I got into download mode with a JIG, but still can't see my phone from my computer, so I can't run the adb shell to get it to boot in recovery mode
I'd appreciate any help you could give me!
leopic said:
Right so I'm download mode now, but every time I go back to STOCK I'm re-stuck in the same loop, seems that I can't get out of it.
I got into download mode with a JIG, but still can't see my phone from my computer, so I can't run the adb shell to get it to boot in recovery mode
I'd appreciate any help you could give me!
Click to expand...
Click to collapse
Restart your computer, use a different usb cable, a different usb port. if that doesn't work, unistall the drivers and reinstall, restart your comp and try again.
For anoyone that might find this thread, Odin 1 Click didn't work for me, so I flash back into stock using Odin (not the 1 click version, another one), here are some links that proved to be very helpful (I ended up Flashing to Serependity 6.4):
http://forum.xda-developers.com/showthread.php?t=1031749
http://www.youtube.com/watch?v=Rdn5GoRjhn0
http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36
http://forum.xda-developers.com/showthread.php?t=884364
http://forum.xda-developers.com/showthread.php?t=919816
http://android-roms.info/roms/80-Serendipity
http://serendipityrom.weebly.com/download.html
I had the same problem just a few weeks ago.
The problem is once you start using 2.2 you can't use ODIN 2.1 anymore.
This is the one that worked for me I897UCJI6-OCD-REV02-Low-designgears(1)
Frawgg said:
I had the same problem just a few weeks ago.
The problem is once you start using 2.2 you can't use ODIN 2.1 anymore.
This is the one that worked for me I897UCJI6-OCD-REV02-Low-designgears(1)
Click to expand...
Click to collapse
this is actually a false statement.
i can still use odin 2.1 after flashing 2.2 roms and even stock 2.2 upgrades
Anyone thought about trying Heimdall if Odin doesn't work?
Yes, i tried using heimdall and that didn't work. I'm wondering what leopic did to fix his, if you could list the steps instead of the links that would help a lot!
stuck in att screen and battery loop
so i have tried searching for threads that match the issue i am having and some of them do and some doent so i have decided to post this. i tried flashing back to stock from a custom rom i was using. i used Odin to do this. i didn't work so i tried it again, same result. it dosent boot just sits at the captivate splash screen. i tried using a different oden tool and after that it just loops through the ATT splash screen and if i have the usb cable plugged in, it just loops the battery screen. im not even sure if it charges. i have tried everything i can find to do to get the download mode to come up and nothing, just loops. i have not tried the jig on this phone yet b/c i haven't made it to radio shack yet to pick the resistors up. is that going to be my only option?
what rom WERE you on?was it cm7 or miui?
Connection Issues? < click here for information on download and recovery mode....
information you should have had BEFORE FLASHING your phone..
i was on serinity 6.2.
i have tried all possible ways to get into d/l mode that i have found
so from the link provided
FROM A POWERED-DOWN STATE - BATTERY REMOVED
- Insert battery, then press and hold Vol+ and Vol-, then insert your USB cable..
goes into battery loop
- Press and hold Vol+/Vol-, Insert Battery, Insert USB cable
goes into battery loop
- Press and hold Vol+/Vol-, Insert USB cable, Insert Battery
goes into battery loop
- Use a 301Kohm jig between USB pins 4-5 (can be manufactured jig or homemade chain of resistors)
have not tried yet
asorendo said:
so from the link provided
FROM A POWERED-DOWN STATE - BATTERY REMOVED
- Insert battery, then press and hold Vol+ and Vol-, then insert your USB cable..
goes into battery loop
- Press and hold Vol+/Vol-, Insert Battery, Insert USB cable
goes into battery loop
- Press and hold Vol+/Vol-, Insert USB cable, Insert Battery
goes into battery loop
- Use a 301Kohm jig between USB pins 4-5 (can be manufactured jig or homemade chain of resistors)
have not tried yet
Click to expand...
Click to collapse
Sounds like a jig is in your future.
YAY. i got the resistors hook it all up and download mode loaded up. AWESOME!!!
viny2cool said:
first try with just holding vol buttons and then inserting USB cable...hold vol buttons till its goes into download mode or the screen changes..if not then try following steps...
1. remove the usb cable, battery, sdcard, SIM.
2. wait 10 seconds, then insert the USB cable.
3. press and hold the 3 button combo while you insert the battery
4. continue to hold until phone's screen goes black twice and release power button.
5. timing is critical, it may not work the first time. Keep going until you see the COM port is connected properly.
still no Dl mode..then buy a jig or make one yourself
Click to expand...
Click to collapse
You safe my Note.. Many Thanks
I thought I lost her x_x
I had this problem before
Users - I am new on this forum and I know this thread is old however I had this problem and it resolved itself. Here is how.
Background: I tried to charge my ATT Captivate using a Nokia microUSB charger that was plugged into a 120v outlet. After a few minutes of charging, the phone would no longer boot past the ATT World Phone screen. Afterwards I tried everything under sun to get a computer recognize the phone so I could reflash the ROM. Nothing worked (different computer, different USB cables, reinstalled the Samsung drivers, etc....).
Resolution of Problem: As a last ditch effort, I tried charging my phone with the same Nokia microUSB cable that appeared to cause the problem in the first placed. This time the Nokia USB cable was plugged into my computer instead of the 120v outlet. My computer had the Samsung phone drivers installed. To my amazement the phone booted up after I unplugged it from the USB cable and all is well.
I am not sure what happened but my Captivate is back with no damage. Hope this helps some poor soul who is trying desperatley to get a computer to recognize a phone that for no apparent reason will not be recognized.
Captivate not working after flashing CM10 nightly
HELP, Actually I rooted my SAMSUNG CAPTIVATE I897 and then tried to install CM10 nightly thorugh Clockwork mod recovery. And I forgot to wipe Dalvik cache. The phone got stuck in AT&T Screen for hours together, the phone was not at all responding i.e. neither to download mode or recovery mode. But yesterday the phone went into download mode .. i tried to install the stock rom for Samsung captivate. Its coming till galaxy S screen after that its switching off ... What is the possible solution. Pls Help with this as I am complete novice to this. Help will be appreciated :good:

I need help! Galaxy S - Dead???

My I9000 dont want to boot....???? Is dead ??? Can you help me..please!
If I press combination key ( volume up, home and start is play just logo samsung Galaxy S and nothing more); I can not enter adb mode or something else...with PC..I see for few secconds unknow drivers in device manager but windows cant download the driver for this because its go one very fast ; I have all the driver installed on my PC inc adb with Android SDK, PDAnet driver for x64 , Samsung Galaxy S driver all is installed on my PC but phone never recognize in usb mode. The only way for boot I think is just boot into sdcard...but I dont know how...IF anyoane know for my uother solutions I expected it...Thenks ...! have a nice day!
surdu_petru said:
My I9000 dont want to boot....???? Is dead ??? Can you help me..please!
If I press combination key ( volume up, home and start is play just logo samsung Galaxy S and nothing more); I can not enter adb mode or something else...with PC..I see for few secconds unknow drivers in device manager but windows cant download the driver for this because its go one very fast ; I have all the driver installed on my PC inc adb with Android SDK, PDAnet driver for x64 , Samsung Galaxy S driver all is installed on my PC but phone never recognize in usb mode. The only way for boot I think is just boot into sdcard...but I dont know how...IF anyoane know for my uother solutions I expected it...Thenks ...! have a nice day!
Click to expand...
Click to collapse
and when pressing volume down ,home , start ?
when you pressed vol up + home + power, did it make you pc go crazy and making you post in the development section?
if so, you are holding it wrong
surdu_petru said:
My I9000 dont want to boot....???? Is dead ??? Can you help me..please!
If I press combination key ( volume up, home and start is play just logo samsung Galaxy S and nothing more); I can not enter adb mode or something else...with PC..I see for few secconds unknow drivers in device manager but windows cant download the driver for this because its go one very fast ; I have all the driver installed on my PC inc adb with Android SDK, PDAnet driver for x64 , Samsung Galaxy S driver all is installed on my PC but phone never recognize in usb mode. The only way for boot I think is just boot into sdcard...but I dont know how...IF anyoane know for my uother solutions I expected it...Thenks ...! have a nice day!
Click to expand...
Click to collapse
Can you get into download mode?
If you can then you can flash a custom or stock rom.
ajazz said:
Can you get into download mode?
If you can then you can flash a custom or stock rom.
Click to expand...
Click to collapse
Agreeed!! you should try this out..
siky_dude said:
when you pressed vol up + home + power, did it make you pc go crazy and making you post in the development section?
if so, you are holding it wrong
Click to expand...
Click to collapse
lol. cant stop laughing !
just priceless.
P.S: im sorry for your phone, try a home made jig.
No I can't....because it's no way to establish connection
between phone and computer
If I press Volume Up or Down + Home + Power = logo Samsung Galaxy S and fails to connect to PC.
Just press only Power I see audio-animation S ..but after that the screen is black and the soft key are illuminated ...and stay so until the battery is consumated. Thanks for your answers.
surdu_petru said:
If I press Volume Up or Down + Home + Power = logo Samsung Galaxy S and fails to connect to PC.
Just press only Power I see audio-animation S ..but after that the screen is black and the soft key are illuminated ...and stay so until the battery is consumated. Thanks for your answers.
Click to expand...
Click to collapse
Try this method: remove battery then put it back [so it's on battery but off!]
home+ volume down + plug USB cable in
This did bring my phone into download mod when POWER+home+volume down did not work.
Hope this helps
Buy a jig on ebay or see that (many members in Paris or RP):
http://www.galaxys-team.fr/viewtopic.php?f=17&t=4778
Hahahaha don't worry bro. Anyway If you have teamviewer I can help you...
phil_man said:
Buy a jig on ebay or see that (many members in Paris or RP):
http://www.galaxys-team.fr/viewtopic.php?f=17&t=4778
Click to expand...
Click to collapse
Before you go for the jig try this.
make sure you have installed usb drivers, they are available here
forum.xda-developers.com/showthread.php?t=961956&highlight=usb+drivers
1) take out the battery from the phone
2) start odin
3) plug in the usb in your phone without inserting the battery
3) now press Volume Down + Home + Power keep them pressed
4) still keeping them pressed insert the battery
Hopefully you will boot into download mode.
ajazz said:
Before you go for the jig try this.
make sure you have installed usb drivers, they are available here
forum.xda-developers.com/showthread.php?t=961956&highlight=usb+drivers
1) take out the battery from the phone
2) start odin
3) plug in the usb in your phone without inserting the battery
3) now press Volume Down + Home + Power keep them pressed
4) still keeping them pressed insert the battery
Hopefully you will boot into download mode.
Click to expand...
Click to collapse
You can insert the battery and then do the 3 button combo - power+vol down+home. This should bring the phone into download mode. After that start Odin and then choose any custom/ stock rom to bring the phone back to life. Personally, whenever I run into such problems I simply put the phone into download mode, start odin, and flash Darky's resurrection 10.2 edition. Never fails.
But, why is god's name is this posted in the dev section???!!!
He said he can get into download mode, he's just having driver problems as far as I can tell and has about as much idea of computers as he does phones (i.e none). Probably how his phone doesn't turn on in the first place.
Thanks....But I dont have a driver problem. I have all the driver in PC the phone is conected for few secconds if I press Volume Up , Home and Power. That is the great problem...THE PHONE STAY CONNECT JUST 2~3 seccund maxim and after thet is only decconected....and I dont have time for instal nothing because all the program incl Odin dont found the phone after 3 secconds. Thanks very much for your help!
burakgon said:
Hahahaha don't worry bro. Anyway If you have teamviewer I can help you...
Click to expand...
Click to collapse
I have TeamViewer...but problem is the phone...just stay for 2,3sec connected with my PC ...after that is only disconected. ....and I think I can't do anything for that....thanks anyway....
surdu_petru said:
Thanks....But I dont have a driver problem. I have all the driver in PC the phone is conected for few secconds if I press Volume Up , Home and Power. That is the great problem...THE PHONE STAY CONNECT JUST 2~3 seccund maxim and after thet is only decconected....and I dont have time for instal nothing because all the program incl Odin dont found the phone after 3 secconds. Thanks very much for your help!
Click to expand...
Click to collapse
Could be a hardware problem, a case of partial contact with the battery. Remove the back cover, put a tiny piece of paper to support the battery to make the contact firm. See how it goes.
ok
1st unistall kies
2nd redownload from www.samsung.com with kies as always and close it
3nd connect ur phone w/o turn it on and check if battery is charging at all
4th if ur battery is ok then unplug ur phone open odin 1.82 connect ur phone hold vol down+home+power for 10sec
5th if ur phone got download mode then w8 until odin regonize (check if windows are trying to get ur phone and see where it fail if not connected)
6th if u phone get regonize then flash an costume or stock rom
7th if nothing work buy Home Made JIG or go to the nearest service center
i wish u to unbrick ur phone and get it back to life
vickylife007 said:
Could be a hardware problem, a case of partial contact with the battery. Remove the back cover, put a tiny piece of paper to support the battery to make the contact firm. See how it goes.
Click to expand...
Click to collapse
Yes , sure you're right ! un pin of the three is defective connection is only half (pin moves too much) I think here is problem . Thanks very much!

[Q] somebody help me pleasee !!!!!!

i was flashing my samsung galaxy s via odin3 and when i hit start flashing it wrote down successful0/unsuccessful1 then i waited and nothing happend so i dissconnected the usb cable and the phone rebooted but unfortunately it didnt boot a black screen with a yellow triangle symbol on a dash between a pc and a phone icons showed up ....... soo after that it kept showing me the same icons and i couldnt enter the download mode or turn it on i tried to remove/reinsert the battery hundreds of times without any result also the usb is not recognized by odin or by kies what can i do ??? someone plz give me an application or a program so i can restore the mobile and reduce this problem
if it is still showing the phone to pc triangle u still can enter download mode ( vol down + back btn + power ). keep trying
pch.radu said:
if it is still showing the phone to pc triangle u still can enter download mode ( vol down + back btn + power ). keep trying
Click to expand...
Click to collapse
Just to clarify, the yellow triangle IS download mode. You need to have that on your screen (which means you're in download mode) in order to use Odin. Simply try again!
read this [GUIDE] Recovery options for "bricked" phone.
I have try you problem.
Turn it off ,dissconnected the usb cable
keep trying down + back + power
I can enter download mode again.
thank you all !
i was making a mistake but now i did it right thanks to u all and i flashed it and it is working just fine .......

[Q] Hard bricked s5570

Hello I accidently went and flashed a s5570i rom into my s5570 and now my phone will not turn on,
or into download/recovery mode.
I have a question will a jig get me into download mode?
Thanks in advance
Also plugged usb in and was holding
Home + power + volume up
and odin detects it but the phone wont flash or turn on and there is nothing on the screen
PhaseCoder said:
Also plugged usb in and was holding
Home + power + volume up
and odin detects it but the phone wont flash or turn on and there is nothing on the screen
Click to expand...
Click to collapse
Download mode is home+power+vol down
Tapatalk 2-vel küldve az én GT-S5570-ről
Yea I know that, but it wont boot to recovery or download mode.
But when I press volume up home and power odin detects it
heyy, the problem already has a solution?
my phone S5570 also has the same problem, black screen, can not go into recovery mode or download mode.
but go to RAMDump (vol up + home + power) and connect it to my PC, my S5570 is detected by the PC and odin, but can not flashing my rom.
stuck in "Setup Connection" I know it because my phone is not in the download mode.
whether the USB JIG is the right solution?
sorry if my language is bad
PhaseCoder said:
Hello I accidently went and flashed a s5570i rom into my s5570 and now my phone will not turn on,
or into download/recovery mode.
I have a question will a jig get me into download mode?
Thanks in advance
Click to expand...
Click to collapse
(I think this set of steps works in these
conditions: Hard-brick, absolutely non-
responsive to any button combination.
Odin still recognizes the phone when
connected through USB port)
1.- Remove both the SIM card and de
microSD card.
2.- KEEP YOUR BATTERY REMOVED
3.- Apply the Download-mode button
combination (known by you all)
4.- WHILE HOLDING THE
COMBINATION, insert the battery, and
keep the buttons pressed untill you get
the download mode.
5.- Flash your phone with a valid
firmware through Odin (Preferebly,
have Odin prepared before doing this
trick).........
hit thanks if this helped you and others....
R: [Q] Hard bricked s5570
Henota11 said:
heyy, the problem already has a solution?
my phone S5570 also has the same problem, black screen, can not go into recovery mode or download mode.
but go to RAMDump (vol up + home + power) and connect it to my PC, my S5570 is detected by the PC and odin, but can not flashing my rom.
stuck in "Setup Connection" I know it because my phone is not in the download mode.
whether the USB JIG is the right solution?
sorry if my language is bad
Click to expand...
Click to collapse
Try to press power+home+vol down+vol up
It'll go to emergency download mode.
Need tester for your rom (Galaxy Mini)? Just pm me! Sent from my BlackdroidLie v1 (My Phone often lies with this rom..)
steexyl said:
Try to press power+home+vol down+vol up
It'll go to emergency download mode.
Need tester for your rom (Galaxy Mini)? Just pm me! Sent from my BlackdroidLie v1 (My Phone often lies with this rom..)
Click to expand...
Click to collapse
and then?
I do not see any change, only detected on my computer
but the screen stays black
Send it to Samsung to repair it or try USB jig
Sent from my GT-S5570 using xda premium
tried jig didnt work, sent it to samsung was back in 3 days fully working
TIP: say you were during a call and phone turned off wouldbnt turn back on. do not mention ROOt or anything else
sir
PhaseCoder said:
tried jig didnt work, sent it to samsung was back in 3 days fully working
TIP: say you were during a call and phone turned off wouldbnt turn back on. do not mention ROOt or anything else
Click to expand...
Click to collapse
how much did you pay ?
hard brick galaxy mini
my galaxy mini also hard brick cannot go to downloading mode or recovery mode .tried jsb jig also cannot any other solution ???????
Same problem.. only solution is bring to ur frend technician, an operation will conduct to ur problem, pay for only 300 pesos here in the Philippines
Sent from my GT-S5570 using xda app-developers app
uploaded wrong rom on galaxy mini s5570,
phone turns off and dead I think,
nothing was working,
I've JTAG the phone from my friend,
phone turns on and able to enter in downloading mode only,
i've uploaded froyo android it failed,
then I uploaded arm11 boot file,
now phone won't be able to enter in DOWNLOAD MODE or recovery mode,
phone turns on and screen went black cannot be able to enter in DOWNLOAD MODE or recovery,
when I connect it to pc with usb cable it automatically turns on and screen turns black,
will usb jig works for it to enter in DOWNLOAD MODE??
please reply me if possible
thanks and regards
Sent from my GT-N7100 using xda app-developers app
---------- Post added at 10:55 PM ---------- Previous post was at 10:42 PM ----------
uploaded wrong rom on galaxy mini s5570,
phone turns off and dead I think,
nothing was working,
I've JTAG the phone from my friend,
phone turns on and able to enter in downloading mode only,
i've uploaded froyo android it failed,
then I uploaded arm11 boot file,
now phone won't be able to enter in DOWNLOAD MODE or recovery mode,
phone turns on and screen went black cannot be able to enter in DOWNLOAD MODE or recovery,
when I connect it to pc with usb cable it automatically turns on and screen turns black,
Odin also won't detecting it
will usb jig works for it to enter in DOWNLOAD MODE??
please reply me if possible
thanks and regards
Sent from my GT-N7100 using xda app-developers app
Jtag it again then try to re install the firmware
Sent from my GT-S5570 using xda app-developers app
brick s5570
I have a Samsung mini S7750, in resetting to factory defaults boot.
Boot mode or recovery mode does not.Only works is a combination of "home + vol up + vol down" moves into some mode where it while Odin detects the two com ports, but nothing to do, Odin hangs on setup conection.
JIG does not work [resistor 301kohm].Display is black.
[cz eng dictionary]
PhaseCoder said:
Hello I accidently went and flashed a s5570i rom into my s5570 and now my phone will not turn on,
or into download/recovery mode.
I have a question will a jig get me into download mode?
Thanks in advance
Click to expand...
Click to collapse
Try the simple just "hold power+home". It'll be leads you to recovery mode, then you should flash the appropriate rom for s5570. Cchopefully help
Sent from my GT-S5570 using Tapatalk
Help please
Hi. My S5570 is hard bricked. Will not turn on in any way i try. Does not go on download or recovery mode. The USB Jig method does not work for me. (I tried with around 3) and I connected my phone to my laptop and help down power + home + vol up and it does not recognise my device but when i do power + home + vol up + vol down it recognises it. I then used Odin to recover it but I have tried over 50 times and it is always stuck on "Setup connection...". Can someone please help? I have already tried re-installing Samsung USB Drivers. Still not working. Please help and thanks!
Kailens said:
Hi. My S5570 is hard bricked. Will not turn on in any way i try. Does not go on download or recovery mode. The USB Jig method does not work for me. (I tried with around 3) and I connected my phone to my laptop and help down power + home + vol up and it does not recognise my device but when i do power + home + vol up + vol down it recognises it. I then used Odin to recover it but I have tried over 50 times and it is always stuck on "Setup connection...". Can someone please help? I have already tried re-installing Samsung USB Drivers. Still not working. Please help and thanks!
Click to expand...
Click to collapse
Only hold vol up+home+power and THEN connect it if download mode works. I mean if it's recognized by the computer, download mode has to work, there is no way. If it does, then flash a stock ROM.
Oh and also something: before doing this, pull out your sd card and even your sim card. The same thing happened to my phone and Odin could flash it after removing everything.
Kailens said:
Hi. My S5570 is hard bricked. Will not turn on in any way i try. Does not go on download or recovery mode. The USB Jig method does not work for me. (I tried with around 3) and I connected my phone to my laptop and help down power + home + vol up and it does not recognise my device but when i do power + home + vol up + vol down it recognises it. I then used Odin to recover it but I have tried over 50 times and it is always stuck on "Setup connection...". Can someone please help? I have already tried re-installing Samsung USB Drivers. Still not working. Please help and thanks!
Click to expand...
Click to collapse
There is another way that u can try:
(Asumming that samsung mobile drivers are installed, with no Samsung KIES... & odin running in the foreground.)
*Remove sim, sdcard & battery.
*Now connect ur phone(without battery) to pc via usb cable.
*Now press the usual download mode keys(volume down & home & power buttons) together without the battery.
*While still holding those three buttons, insert the battery.
At this point Odin should detect ur phone so that u can flash stock firmware.
U can try this atleast since u r left with no choice:sly:.
Good Luck..!!:thumbup:
Hope this helps...!!

Categories

Resources