So this morning I decided to get myself a new ROM on my optimus 2x. After 2years with CyanogenMod7, I was starting to get more and more problems, so I went for it... my 2nd lifetime rom installation.
I thought I understood it all good.. decided to go with ParanoidAndroid CM10 (http://forum.xda-developers.com/showthread.php?t=2097807). I followed pengus's instructions thoughtfully.
1. Copied the ROM .zip, the gapps .zip, and the kernel .zip.,
2. Factory reset, clear cache, dalvik, etc..
3. Booted the phone in recovery, and installed the 3 .zip package in the order I just mentioned (at step1)
After rebooting my phone would keep booting with a new and fresh version of Cyanogenmod 7.. for some reason. I remade the operation a couple times and it would always get my in cyanogenmod (wtf?). Now, after a couple hours of messing around, I installed back nvflash and tried other loaders : cwm 5.0, cwm 6.0, twrp 2.5.0..
Eventually after the usual clear cache / factory reset, unpacking zip files, my phone stoped rebooting in cyanogenmod7, but then it would just get stuck with the "LG" logo forever....
Now, I've taken my ENTIRE day off trying to figure this one now. I've been at it since 8hours more or less, and now I'm expecting calls and I'm out of phone. The whole experience has been very frustrating.... and I'm out of solutions here..
Hopefully this is just a newbie mistake (cuz I'm still kinda newbie in the whole rooting experience). Plz help...
something I don't understand :
when using twrp 2.5.0 as recovery, after I did a full wipe, and fresh installation, just after I click reboot now. it says that it appears my phone is not rooted, and that I can click yes to install SuperSU.. sometimes I click YES, sometimes I don't ... both action don't change the fact that my phone gets stuck at the LG logo.
So turns out I had a gingerbread partition and was trying to install an IceCreamSandwitch version of android.
With All-In-One-Toolkit, I was able to fix the partition and all.... wow all my day because of this ;(
Related
I downloaded and installed Rodriguezstyle MiUi rom yesterday, following all the install procedures(the double wipes and what not). But when I go to use it, it sometimes worked and it sometimes would crash and reboot. It was very weird because instead of just rebooting to the os, it would give the Nexus X then, after going no further, reboot again giving the Nexus X and reboot again and so on. This happened with every MiUi rom I installed, but not with the Evil Desire rom I have now. I really like MiUi, do you guys have any fix?
Specs - Nexus One w/ 5.12 Korean Radio
Trying Rods 1.6.6
Have you overclocked it with setcpu? You might want to turn that off and see what happens. I assume you did a complete wipe first btw?
I did wipe and my rom crashes before I can install setcpu
MIUI 0.11.5 + English Pack
I am using MIUI 0.11.5 Deodexed + English Pack. No issues so far. Its perfect.
Why are you making multiple useless threads about this?
@ inferus
could you post the site you got it from. And I have also tired the bundle, which did not work either
MIUI stock
Here you go
http://forum.xda-developers.com/showthread.php?t=789566
I tried all three of those and on every one my phone gets stuck in the boot loop. I have tried everything, factory wiping, cache wiping, dalvik wiping, battery wiping, and clear storage. is there any way I can completely delete the operating system off my phone so I can freshly install the new rom of MiUi. This is bootloop also happens to me when I flash micromod and cyanogen. THIS IS SO FRUSTRATING! does anyone have the same problem too
this static X bootloop also happened a lot on KoR. its based on CM6.0 but maybe this solution will also fix your problem:
http://forum.xda-developers.com/showpost.php?p=8023620&postcount=4383
@pseudoheld
You are the freaken man, however, is this a permanent fix or only temporary?
I spoke too soon, when I do HBoot in the boot loader, sometimes it skips going to the recovery and goes into the boot loop. Is there any way to update the bootloader
paintmandoo3993 said:
I tried all three of those and on every one my phone gets stuck in the boot loop. I have tried everything, factory wiping, cache wiping, dalvik wiping, battery wiping, and clear storage. is there any way I can completely delete the operating system off my phone so I can freshly install the new rom of MiUi. This is bootloop also happens to me when I flash micromod and cyanogen. THIS IS SO FRUSTRATING! does anyone have the same problem too
Click to expand...
Click to collapse
I was not referring to the other links on that post. I installed the stock hosted directly on that post. Also provided a link below for your convenience
http://djmcnz.batteryboss.org/MIUI/deodexed/miui-n1-0.11.5-deodexed-signed-PROPER.zip
And the English pack.
http://forums.miui-dev.com/viewtopic.php?f=5&t=39
i will keep you posted, again
and same problem. Bootloop and whenever I go to the HBoot and try to boot into recovery I get the boot loop again and it wont even enter recovery, I gotta pop the battery
what recovery did you use
Hi all,
So after I flash a new ROM (MIUI MGv2/RC8vC/MGv1) I always hang at the Galaxy S GT-I9000 screen - the first boot screen.
I am wondering what this means? is it a corrupt file, something wrong with my internal sdcard, ROM not installed properly?
Please help,
Thanks.
some times a wipe from recovery will help and goes back to normal boot
many issues may cause this problem for instance if framework.jar or android.policy.jar or... have some bugs , will happen like that
Hi,
By wipe you mean clearing the formatting system, data, cache, dalvik cache and a factory reset? I ask this because the MIUI roms are not are non-wipe and the instructions recommend you to format those places before install (which I did).
I mean wipe cache partition from recovery. just try it and ley us know if it works
Well I just tried again but it doesn't work because I can't access recovery mode. It hangs at the Galaxy S screen and doesn't move from there so I'm wondering why because if I can't fix the bad install then I can't access the recovery mode and can only flash.
if recovery dont work BUT download mode does,
start the whole process again, flash back to stock froyo with froyo bootloader.
did you come to MIUI from Gingerbread ??
Well i've done the process like 10 times, nearly every single time from froyo (JPU,JS5,Ezbase 2.0) and I also went from 2.1 to 2.2 and then to MIUI. The other times I have tried coming from CM7 as CM7 works.
well i have a similar issue but in my case i just wiped my data thru cwm on darky v8 xxjpy..
now i get boot loops,any idea what should i do??
i know this is not exactly the thread but if i get my answer it'll save me from starting a new one..
When I got bootloops i normally reflashed. If you don't have data it will probably work?
I assume you have data as your on Dark v8 when V9 is out?
i dont understand by have data??
i flashed v9.5 but went back to v 8 few months ago..
today i just wiped/factory reset my phone using cwm and it was succesful but now its bootloops and vibrations..
i never wiped my phone before and only have flashed using cwm,never used odin for flashing roms!!
OH I see, by data i meant personal data that you might want to back up...I'm not to most knowledgeable but I know how to flash roms. I reckon you should try to flash V8 it again if you can enter recovery.
Hello!
Today, i decided to install cyanogemmod on my 2x. So i downloaded ROM manager and downloaded cyanogenmod. everything went fine until i was going to boot for the first time. I got into a bootloop. so i tried taking out the battery and all that stuff but it still would't work. So i tried to recover the phone. I recovered it to a month old backup (I could not find the one i made in ROM manager before i installed cyanogenmod) The recovery went fine. But, when i rebooted it got into a loop on the lg logo! (the one without the loading bar) it would just load the lg logo, be there for like 10sec, then it would do the same. I tried recovering one more time, but it didn't work. The same thing happend. What should i do? :S Should i wipe data/factory reset?
EDIT: My phone was on android 2.3.4 before i download cyanogenmod.
BTW before i installed cyanogenmod, i forgot to clear cache and data. I was in a hurry so i did't notice the screen popping up, I automatically pressed "ok" without selecting anything.
Thanks for the help
- Kashif
Different partitions... Look for something called backtoext3 in the dev section (or somewhere else) The problem is that when you flash a custom rom like CM you convert your filesystem to EXT4, while stock is EXT3.
So basically what you have to do is:
1) Reboot into recovery
2) Wipe everything
3) Flash Backtoext3 zip
4) Restore Nandroid.
This should work. this will take you back to stock.
So i have to restart the phone, Choose wipe data/factory reset, then flash backtoext3 (how do i do it? lol) then restore nandroid (the backup i just tried to restore twice?)
kashi169 said:
So i have to restart the phone, Choose wipe data/factory reset, then flash backtoext3 (how do i do it? lol) then restore nandroid (the backup i just tried to restore twice?)
Click to expand...
Click to collapse
Yes
Flashing backtoext3 is just flashing the zip file you put on the sd card. (and then install zip from SD ) an then restore your nandroid stock backup and you're back on stock.
But you said you wanted to try CM right? In that case, wipe everything (factory reset/data + cache + dalvik) and then flash the CM7 rom and you have CM! Don't worry about backtoext3, your partitions are already on EXT4, because of your prior CM flash.
Ohh! Thanks Can you send the files for cm (2.3.4)? I've found some, but im not sure if my phone is compitable with them :S im really afraid to mess something up again
My. Signature. (CM7 temasek's KANG = the best CM7 at the moment )
I did everything and i got into a bootloop at the skating andriod screen again
OK, restored my phone back... Now it wont connect to the network and the battery has a question mark inside it. It also says the battery level is 999% heelp
Nvm, got my phone back to normal still dont understand why cm wont work...
You need cwm5 to flash cm.
I have a G2x, which is basically the same phone. But anyway, I would recommend nvflashing CWM and not getting it from ROM Manager.
CWM 5.0.2.0 will do just fine, but it is indeed old...
Anyway, are you sure you waited long enough on the CM boot screen? The first boot might take a couple of minutes. (4 or 5)
Hi all, my name is Daniel.
I am using a motorola Milestone A853 for the past one year and never faced any issue while rooting or installing custom roms right upto cm10.
from last two months the milestone has not been working properly. It so happened i had installed CM 9.0.1d and everything worked fine. but once the battery died the phone did not boot up and was stuck on moto boot logo and kept restarting from there. I tried to go into open recovery (fufu minimod) using the X+power key and it goes into recovery but after loading recovery it did not display any options and the other text was red in color and it showed the error failed to load menu.init. I replaced the update.zip file along with the open recovery folder, but still nothing worked. I then tried another open recovery but still open recovery never loaded. Then i SBF'ed the device and went back to stock and was able to use my phone again. But then when i try to root the device again i am not able to root using vulnerable SBF as it does not install though RSDLite shows pass. Then i used superoneclick to root and that did the trick. But still open recovery never installed or load. Luckily androidiani recovery which displayed an error cannot mount but still created the menu and i was able to install custom OS but only cm 7.2.4e and not cm9 nor cm10. I cannot reboot the phone as the phone never starts up. only after clearing dalvik and wiping cache phone boots up. After a certain time now i still cannot install cm7.2.4e as it does not load and gets stuck on custom bootscreen, so i installed MIUI rom which works and starts up but i still can never reboot my phone.
Errors Seen E: cant mount /cache/recovery/command
Kindly help as the phone is just barely working.
Your phone has some serious issues...
How stable it is with stock rom? Maybe You should flash a stock 2.2 and see if you have any issues.
If not, then flash vulnerable recovery and so on, step-by-step.
Maybe it will be easier to locate the source of the problem this way.
Tried Everything
Erovia said:
Your phone has some serious issues...
How stable it is with stock rom? Maybe You should flash a stock 2.2 and see if you have any issues.
If not, then flash vulnerable recovery and so on, step-by-step.
Maybe it will be easier to locate the source of the problem this way.
Click to expand...
Click to collapse
Thank you for your reply. I have tried flashing stock 2.2 and still I cannot reboot the phone without wiping cache and using the reset factory option in stock recovery. Using superoneclick I can root it and install androidiani recovery but I cannot use cm10 or cm 9. after installing cm9 the phone just restarts after cm9 boot screen and after installing cm10 the phone shows the stock android boot screen. cm 7.2.4e installs as well as miui but if battery dies or if I have to restart the phone if it gets sluggish and slow then I cannot...everytime for the phone to boot I have to wipe dalvik and cache for custom roms and for stock roms I have to wipe cache and factory reset.
SO basically I am stuck...have tried changing the sd card, repartitioning the sd card, but nothing worked
Open recovery cannot be used only andoidiani works after popping up some errors.
Kindly help.
Ok so i had 5.02 rooted kitkat. Obviously unlocked bootloader. It says 3. And twrp 2.8something...
For the previous months every time i rebooted the phone it took like 10 minutes to boot for some reason. But it worked. It was laggy these days so i thought i will wipe everything and install CM12.1.
So i downloaded the rom and gapps. Then i wiped delvik, cache, system, internal memory and data. I also did format data.
I dont really understand, obviously, how android works. So i had the zips on external card and pressed install on from twrp menu. Then wiped cache and delvik cache. Tried to reboot and says 'Warning no OS found'. I say okay and then it says that it wants to root. I say ok again.
Now the PROBLEM is that it does nothing. It justs stucks on motorola boot logo for too much time. I am not sure if this is because i already had a problem with booting taking too much time or because of what i have wiped. I also tried updating bootloader again. Not sure if this changed anything
Long story short, how do i continue now? Is there a way to really delete everything i have done on the phone, then install fresh twrp and then CM12.1? And how do i fix the booting taking too much time problem...
Any help will be valueable. I just dont get how things work because nowadays there are too many things, kernels, roms, bootloaders, recoveries etc... Can i just flash the CM rom from my computer via usb? I tried something like that by ?sideload? only to get a problem about requiring 1.0.32 version. I tried to download new SDK but again i have 1.0.31 version of adb...
Thanks!
P.S. Yes, i am totally lost. But i have desire to understand...
NUKE1989 said:
Ok so i had 5.02 rooted kitkat. Obviously unlocked bootloader. It says 3. And twrp 2.8something...
For the previous months every time i rebooted the phone it took like 10 minutes to boot for some reason. But it worked. It was laggy these days so i thought i will wipe everything and install CM12.1.
So i downloaded the rom and gapps. Then i wiped delvik, cache, system, internal memory and data. I also did format data.
I dont really understand, obviously, how android works. So i had the zips on external card and pressed install on from twrp menu. Then wiped cache and delvik cache. Tried to reboot and says 'Warning no OS found'. I say okay and then it says that it wants to root. I say ok again.
Now the PROBLEM is that it does nothing. It justs stucks on motorola boot logo for too much time. I am not sure if this is because i already had a problem with booting taking too much time or because of what i have wiped. I also tried updating bootloader again. Not sure if this changed anything
Long story short, how do i continue now? Is there a way to really delete everything i have done on the phone, then install fresh twrp and then CM12.1? And how do i fix the booting taking too much time problem...
Any help will be valueable. I just dont get how things work because nowadays there are too many things, kernels, roms, bootloaders, recoveries etc... Can i just flash the CM rom from my computer via usb? I tried something like that by ?sideload? only to get a problem about requiring 1.0.32 version. I tried to download new SDK but again i have 1.0.31 version of adb...
Thanks!
P.S. Yes, i am totally lost. But i have desire to understand...
Click to expand...
Click to collapse
http://forum.xda-developers.com/moto-g-2014/general/restore-to-stock-t2873657 try to restore to stock
I am trying to do this but i dont have some files like boot.img or logo.bin etc.... Where can i download those? There is a link about mfastboot is not working. I am using linux btw so i guess the fastboot i already have is okay
EDIT: Ok i am obviously stupid. The files are on the zip ROM. Okay i am doing this. Now the question i have is, cant i install CM12.1 using fastboot like this ROM?
Okay and it worked. It booted stock rom and this time it booted in a minute or two (considering it was the first time booting i think its awesome).
Now i have to try CM rom. At least i know how to return the phone back if anything happens. Thank you very very much!
NUKE1989 said:
Okay and it worked. It booted stock rom and this time it booted in a minute or two (considering it was the first time booting i think its awesome).
Now i have to try CM rom. At least i know how to return the phone back if anything happens. Thank you very very much!
Click to expand...
Click to collapse
Glad to help
now just copy the rom you want to install and the gapps, install the latest TWRP, wipe: Cache, Dalvik Cache, Data and System and just flash the zips
Many thanks I managed to install CM12.1. Thought i think i failed to flash most of gapps for some reason i dont really care.
I only have one severe bug. 3G is not working for some reason. So i dont have gsm internet except the slow one...