Database Develop

[Discontinued] [HOW TO] Root, Stock, ODIN For P3113UECLK7

This is nothing more than a pre-rooted completely stock image that you would flash in Odin.
It is based off of this stock image: P3113UECLK7_P3113XACCLK7_HOME.tar.md5
Simply adds the SuperSU apk v0.99 and su binary.
From there you can chose to install busybox, flash a non-stock recovery, etc.
It DOES NOT wipe any data. So if you are coming from a completely different rom base then you will want to boot to recovery and factory reset.
This is good for getting back to known good state after you may have flashed something and now have weird behavior going on. Also good if you want to run stock but just have root for a few apps like adaway or tibu.
Instructions:
Extract the root66_xxx_.tar.md5 from the .7z file you downloaded.
Use Odin, put device into download mode, connect to computer and open Odin.
once in odin click the PDA field and select the root66_xxx_.tar.md5 you downloaded.
Leave Auto Reboot and F. Reset Time checked.
click start and
when done let device reboot.
If you have issues flashing with Odin please ensure you are using the microusb cable that came with the device, users have had issues using other cables.
Choose One:
Download: root66_XAC_P3113UECLK7.7z - JellyBean 4.1.1
Download: root66_XAR_P3113UECLK7.7z - JellyBean 4.1.1

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ty for this trying it out now
Update: installed via odin now its in recover loop. Just stuck with the lil android guy with his spinning cube in his chest. Progress bar at the bottom isn't moving at all.

F3AR420 said:
ty for this trying it out now
Update: installed via odin now its in recover loop. Just stuck with the lil android guy with his spinning cube in his chest. Progress bar at the bottom isn't moving at all.
Click to expand...
Click to collapse
Few questions....
I see in your signature you had AOKP. Did you flash this direct from AOKP? This doesn't wipe data and since it goes back to stock its still trying to use all your /data from aokp. You'd want to boot into recovery and do a factory reset coming from a different rom base than stock.
Also I use the Region XAC stock file. There is also an XAR. Does anyone know the difference? Samsung-updates seems to list XAC as N/A for region while XAR as Cellular South but I think I read the opposite from someone on the forum here.

Nah haven't updated my profile in a while. I had actually come from stock 4.0.4 i believe in my case atleast that my battery simply wasn't charged well enough.
Sent from my HTCEVODesign4G using Tapatalk 2

I would very politely like to point out that this has already been posted [13 Jan 2013] in this thread: http://forum.xda-developers.com/showthread.php?t=2098085 -- UECLK7

metalchef said:
I would very politely like to point out that this has already been posted [13 Jan 2013] in this thread: http://forum.xda-developers.com/showthread.php?t=2098085 -- UECLK7
Click to expand...
Click to collapse
Close. That thread shows you step by step how to do it yourself using mobile Odin lite using original official unmodified update files. This thread seems to give you one file to flash with Odin. Haven't tried this file yet...yet.

metalchef said:
I would very politely like to point out that this has already been posted [13 Jan 2013] in this thread: http://forum.xda-developers.com/showthread.php?t=2098085 -- UECLK7
Click to expand...
Click to collapse
There are a few differences. To use that thread your device has to be rooted. Here it does not.
In that thread you are using mobile odin to flash the stock file, then using recovery to flash root. Here root is pre-injected into the stock firmware. You can use mobile odin to flash this and be done. (unless you want a non-stock recovery etc).

LeftyGR said:
Close. That thread shows you step by step how to do it yourself using mobile Odin lite using original official unmodified update files. This thread seems to give you one file to flash with Odin. Haven't tried this file yet...yet.
Click to expand...
Click to collapse
Yes though you mention to use the XAR file and I've pre-injected the XAC. Outside of what you've said I can't find what region would be for what tablets. I'll post up the XAR as well and let the user pick.

XAR region uploaded..

mrRobinson said:
Few questions....
I see in your signature you had AOKP. Did you flash this direct from AOKP? This doesn't wipe data and since it goes back to stock its still trying to use all your /data from aokp. You'd want to boot into recovery and do a factory reset coming from a different rom base than stock.
Also I use the Region XAC stock file. There is also an XAR. Does anyone know the difference? Samsung-updates seems to list XAC as N/A for region while XAR as Cellular South but I think I read the opposite from someone on the forum here.
Click to expand...
Click to collapse
I found this suggestion to be quite helpful. I was coming from Tsunami and found if it would not boot to go back and factory reset. Thanks!
---------- Post added at 11:25 AM ---------- Previous post was at 11:21 AM ----------
Interestingly I am having a problem using TWRP to backup this ROM. TWRP FCs and the Tab reboots before any data is written to the SD card. It does create the named backup folder but dies early on in the backup process. Going to try CWM next but the backups created by CWM and TWRP are not compatible. TWRP has worked fine on all the other ROMs I tried. I need to perform more testing.

archcantor said:
I found this suggestion to be quite helpful. I was coming from Tsunami and found if it would not boot to go back and factory reset. Thanks!
---------- Post added at 11:25 AM ---------- Previous post was at 11:21 AM ----------
Interestingly I am having a problem using TWRP to backup this ROM. TWRP FCs and the Tab reboots before any data is written to the SD card. It does create the named backup folder but dies early on in the backup process. Going to try CWM next but the backups created by CWM and TWRP are not compatible. TWRP has worked fine on all the other ROMs I tried. I need to perform more testing.
Click to expand...
Click to collapse
yea try cwm. this is just stock maybe twrp is having some issue.

F3AR420 said:
ty for this trying it out now
Update: installed via odin now its in recover loop. Just stuck with the lil android guy with his spinning cube in his chest. Progress bar at the bottom isn't moving at all.
Click to expand...
Click to collapse
I have got exactly the same issue like this one when I was trying
root66_XAR_P3113UECLK7.7z - JellyBean 4.1.1
on my P3113. The tablet seems frozen at this stage and if I hold the power botton and let it reset, it will come back at the same screen with the progress bar unchanged.
My P3113 is with stock ICS ROM and rooted.
I cant do factory reset because when I trying to go to recovery mode, this screen shows up...

spunky2008 said:
I have got exactly the same issue like this one when I was trying
root66_XAR_P3113UECLK7.7z - JellyBean 4.1.1
on my P3113. The tablet seems frozen at this stage and if I hold the power botton and let it reset, it will come back at the same screen with the progress bar unchanged.
My P3113 is with stock ICS ROM and rooted.
I cant do factory reset because when I trying to go to recovery mode, this screen shows up...
Click to expand...
Click to collapse
I got the same result as well, eventhough Odin said pass. Funny thing is I put in download mode again and flash this official firmware from France. The Odin said failed, but after I reboot all good.

droidnext said:
I got the same result as well, eventhough Odin said pass. Funny thing is I put in download mode again and flash this official firmware from France. The Odin said failed, but after I reboot all good.
Click to expand...
Click to collapse
You must have lost the root by flashing the official stock rom, right?
I was thinking to flash the stock ICS rom for P3113 someone post on this board also but don't want to go through the hustles to root it again

spunky2008 said:
You must have lost the root by flashing the official stock rom, right?
I was thinking to flash the stock ICS rom for P3113 someone post on this board also but don't want to go through the hustles to root it again
Click to expand...
Click to collapse
Yes, I lost root. But I end up flash USA official firmware again and used this root method . It's very easy, took 15 sec. I came from CM10.1 nightly, but want to try official JB from Samsung. Actually, it's smooth and fast. Maybe I stick to it, I am tired of update everyday for CM10.1.

Removed post.

i tried this from a corrupted cm10.1 nighlty custom kernel which is stuck on the samsung galaxy tab 2 logo. odin was successful, i got pass the android screen shown in the previous post but now im stuck on the samsung logo with the blue orb. help

Re: [HOW TO] Root, Stock, ODIN For P3113UECLK7
jonahmt21 said:
i tried this from a corrupted cm10.1 nighlty custom kernel which is stuck on the samsung galaxy tab 2 logo. odin was successful, i got pass the android screen shown in the previous post but now im stuck on the samsung logo with the blue orb. help
Click to expand...
Click to collapse
Boot to recovery and factory wipe.

Removing the my external SD card did the trick for me.

Thanks cumanzor. One small comment like yours and it relieves a major headache for me, thanks again.

[ROM] Galaxy Tab 2 7" P3113, Jelly Bean 4.1.1 JRO03C P3113UECLK7 Rooted

Here's the stock ROM for the Galaxy Tab 2 7" P3113, Jelly Bean 4.1.1 JRO03C P3113UECLK7. ROM is rooted.
This is not deodexed. Its stock with root only.
Flash from recovery. Full Wipe if coming from another ROM.
Download:
GT2-JB-Stock-Rooted-P3113UECLK7.zip

Here's some screen shots!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my HTC6435LVW using Tapatalk 2

thanks for this! (I already hit the "THANKS" button)...
I must say, that I was skeptical there'd by much, if any, difference between this and RomsWell v1.1 and/or kwbr Espresso.... but! There is at least one fundamental difference: the screen rotation is proper! -- e.g. Bejeweled 2 doesn't flip itself upside when my wife plays it -- whereas with the aforementioned ROMs, it did.
EDIT: Another [awesome] plus, is that I no longer get "Missing hardware ID" when I connect my tablet to my PC (it also shows as GT-P3113, not GT-P3110).
EDIT 2 (revised 11 March): overall performance is fantastic. Battery is amazing!: in a 24-hour period, stand-by used ~20% of battery (I thought I'd turned my tablet off, and when I went to use it -- a day later, I realized I'd never turned it off).
Nice to have an official release, esp with r00t ^_^

I am stuck in a boot-loop...
An suggestions...?

HOw to make a recovery flashable .zip from the ODIN flashable ROM
Hi,
I have the same version but donwloaded it from SAMMOBILE site and flashed with ODIN. Could you tell me the way to make a recovery flashable .zip from the ODIN flashable ROM?
Thanks!
MicroMod777 said:
Here's some screen shots!
Sent from my HTC6435LVW using Tapatalk 2
Click to expand...
Click to collapse

grassy-sneakers said:
I am stuck in a boot-loop...
An suggestions...?
Click to expand...
Click to collapse
wipe cache and dalvik cache via CWM...also, TWRP isn't official for tab 2 afaik, so if you're not using CWM-based recovery, I would flash that, then retry to zip file. I was successful on the first attempt...
EDIT: I would even format /system, then re-flash the ROM... I usually do that anyway before I flash a new ROM.

metalchef said:
thanks for this! (I already hit the "THANKS" button)..
EDIT 2: overall performance is fantastic. Battery life ain't what it used to be with 4.0.4, but it's only a marginal difference. Nice to have an official release, esp with r00t ^_^
Click to expand...
Click to collapse
Sweet. I've been working on a custom version also.
grassy-sneakers said:
I am stuck in a boot-loop...
An suggestions...?
Click to expand...
Click to collapse
You need to do full wipe. I used cwm recovery also.
nagenderjeet said:
Hi,
I have the same version but donwloaded it from SAMMOBILE site and flashed with ODIN. Could you tell me the way to make a recovery flashable .zip from the ODIN flashable ROM?
Thanks!
Click to expand...
Click to collapse
Not sure how to do that. I didn't get a chance to extract the stock recovery either. I haven't looked as the raw files from sammobile.
metalchef said:
wipe cache and dalvik cache via CWM...also, TWRP isn't official for tab 2 afaik, so if you're not using CWM-based recovery, I would flash that, then retry to zip file. I was successful on the first attempt...
Click to expand...
Click to collapse
Yes, cwm works very easy for me also.
Sent from my HTC6435LVW using Tapatalk 2

metalchef said:
wipe cache and dalvik cache via CWM...also, TWRP isn't official for tab 2 afaik, so if you're not using CWM-based recovery, I would flash that, then retry to zip file. I was successful on the first attempt...
EDIT: I would even format /system, then re-flash the ROM... I usually do that anyway before I flash a new ROM.
Click to expand...
Click to collapse
Nice..., thanks...!
Yeah, I reinstalled the Stock Rom w/Stock Recovery last night, before attempting this latest Rom. Figuring the Stock Recovery would wipe thoroughly enough. I am off to go have dinner and do not have the time right now, but will try a thorough wipe with CWM Recovery and another attempt to install this Rom when I return. Will post my results then.
Thank you, for your response...!
---------- Post added at 06:05 PM ---------- Previous post was at 05:50 PM ----------
nagenderjeet said:
Hi,
I have the same version but donwloaded it from SAMMOBILE site and flashed with ODIN. Could you tell me the way to make a recovery flashable .zip from the ODIN flashable ROM?
Thanks!
Click to expand...
Click to collapse
I believe it is related or requires a Linux Box/Ubuntu, I have seen tutorials around here in the XDA Forum, but I am little bit short of time right now to dig one out of Google, but was able to find this one to provide you with an example. to illustrate how it requires a md5 check sum that is only able to be produced in a Linux Box of some sort, though command line.
[TUTORIAL] How To Create Your Own Odin Flashable TAR or TAR.MD5

Nope...?, I have triple wiped cache and dalvik cache, factory/data, and to no dismay have I been able to avoid a boot-loop.
I am using CWM Recovery version 6.0.2.3 Touch, and like I mentioned, all it does is boot-loop.
FYI; I have also found a Sammobile download consisting of a number of (XAR) Stock Roms to bring me to the point of this build, as well as, tried multiple times to updated via WiFi, and it all comes down to this particular build. That my device gets caught in a boot-loop. I am not sure what it is with this build, but it just does not want to fit on my device.
---------- Post added at 09:42 PM ---------- Previous post was at 09:36 PM ----------
I have even tried this Stock Software Update: P3113UECLK7 Android 4.1.1 Jelly Bean...?

grassy-sneakers said:
Nope...?, I have triple wiped cache and dalvik cache, factory/data, and to no dismay have I been able to avoid a boot-loop.
I am using CWM Recovery version 6.0.2.3 Touch, and like I mentioned, all it does is boot-loop.
FYI; I have also found a Sammobile download consisting of a number of (XAR) Stock Roms to bring me to the point of this build, as well as, tried multiple times to updated via WiFi, and it all comes down to this particular build. That my device gets caught in a boot-loop. I am not sure what it is with this build, but it just does not want to fit on my device.
---------- Post added at 09:42 PM ---------- Previous post was at 09:36 PM ----------
I have even tried this Stock Software Update: P3113UECLK7 Android 4.1.1 Jelly Bean...?
Click to expand...
Click to collapse
Are you able to flash any Rom and boot?
Sent from my HTC6435LVW using Tapatalk 2

MicroMod777 said:
Are you able to flash any Rom and boot?
Click to expand...
Click to collapse
Yeah...!, I have no problem. The problem is P3113UECLK7 Rom, I get to P3113UEBLH2 the last update offered by Samsung, and it gets stuck in a boot-loop when it reboots.
I even started over with a Odin Flash of a Stock Rom & Recovery, and then work my way up to the third update P3113UEBLH2. Everything continues to work fine, until I get the Jelly Bean 4.1.1 update no matter if it is a Stock OTA update or a Modified (Rooted) update, forced through Odin or even assisted through Kies. After it reboots it is stuck in a endless boot-loop.
I even let it sit on the charger over night, to see if it just needed sometime to load.

grassy-sneakers said:
Yeah...!, I have no problem. The problem is P3113UECLK7 Rom, I get to P3113UEBLH2 the last update offered by Samsung, and it gets stuck in a boot-loop when it reboots.
I even started over with a Odin Flash of a Stock Rom & Recovery, and then work my way up to the third update P3113UEBLH2. Everything continues to work fine, until I get the Jelly Bean 4.1.1 update no matter if it is a Stock OTA update or a Modified (Rooted) update, forced through Odin or even assisted through Kies. After it reboots it is stuck in a endless boot-loop.
I even let it sit on the charger over night, to see if it just needed sometime to load.
Click to expand...
Click to collapse
it's been my experience, that touch-based recovery" [on the GT-P3113] doesn't play well with others." for example, I was unable to flash kwbr espresso when I had touch-based recovery (either twrp or cwm-based, I forget -- doesn't matter) on my tablet.
flash 6.0.2.3 non-touch-based recovery (yeah, I know, having to use the vol +/- keys sucks ^_^) and try again. :good:
(and I would freeze the software update app(s) in TiBu. since I'm sure you know that you can't flash OTA's with custom recovery - that's one cause of a bootloop)

Phone died!! Please Help

Please Help..
i dont know what happened but i turn my phone on and it dislpays only colourful rustle... and it doesnt boot then i boot it in download mode and flash stock rom over odin.. it passed but it doesnt boot anymore but to recovery.. download mode works and recovery .. the samsung logo is gone and there is now the colourful rustle but it only reboots to recoivery mode

Just to clear things up, do you have a i9070 or i9070p? and which firmware did you flash?

panda00 said:
Just to clear things up, do you have a i9070 or i9070p? and which firmware did you flash?
Click to expand...
Click to collapse
I have a I9070P and flashed I9070PXXLK4_I9070PDBTLK1_DBT
i flashed it in Odin with Auto Reboot and F. Reset Time
Recovery, Charging Mode and Download Mode works but it only reboots to Recovery every time
the Boot Logo ("Samsung Galaxy S Advance I9070P) is gone and there is now only colourful rustle but it boots to recovery
The Recovery Log is:
Code:
Deleting Cryption Meta Data
--Copying media files...
Succesfully copied media files.
#MANUAL MODE#
--Updating application...
Copying Contents.
Succesfully updated application.
--Applying MULTI-CSC...
Installing Multi-CSC
Can't access to "/system/csc/DTM/system".
Successfully applied multi-csc.

Karsten95 said:
I have a I9070P and flashed I9070PXXLK4_I9070PDBTLK1_DBT
i flashed it in Odin with Auto Reboot and F. Reset Time
Recovery, Charging Mode and Download Mode works but it only reboots to Recovery every time
the Boot Logo ("Samsung Galaxy S Advance I9070P) is gone and there is now only colourful rustle but it boots to recovery
Click to expand...
Click to collapse
Every time the same error... Flashing i9070 firmware on I9070P and the result is brick
Inviato dal mio GT-I9070 con Tapatalk 2

KINGbabasula said:
Every time the same error... Flashing i9070 firmware on I9070P and the result is brick
Inviato dal mio GT-I9070 con Tapatalk 2
Click to expand...
Click to collapse
No no, he flashed the correct firmware, it says i9070p...
....
So from what I understand, it just automatically reboots into recovery?

In recovery try to wipe data factory reset, davilk cache and cache, then reboot the phone. Or try to remove battery and leave the phone without battery for a while (like 15 min), then power on again and see what happen.

panda00 said:
No no, he flashed the correct firmware, it says i9070p...
....
So from what I understand, it just automatically reboots into recovery?
Click to expand...
Click to collapse
Jep it reboots everytime in recovery and gives out the log.. then i can choose between reboot System, wipe cache etc. when i choose Reboot then it reboots to Recovery Mode
But that scary **** is that the Boot Image(Samsung Logo) is gone or. crashed
rodaven:badly the same

Karsten95 said:
Jep it reboots everytime in recovery and gives out the log.. then i can choose between reboot System, wipe cache etc. when i choose Reboot then it reboots to Recovery Mode
But that scary **** is that the Boot Image(Samsung Logo) is gone or. crashed
rodaven:badly the same
Click to expand...
Click to collapse
Try to flash using oding other firmware, maybe that can work.

rodaven said:
Try to flash using oding other firmware, maybe that can work.
Click to expand...
Click to collapse
I already tried... the same .. Reboot to Recovery and Samsung Logo gone

Karsten95 said:
I already tried... the same .. Reboot to Recovery and Samsung Logo gone
Click to expand...
Click to collapse
Like this? That was my Samsung logo.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I solved it by taking phone to service. Didn't have binary counter at 0 - so I payed about 20$ for that.

shut_down said:
Like this? That was my Samsung logo.
I solved it by taking phone to service. Didn't have binary counter at 0 - so I payed about 20$ for that.
Click to expand...
Click to collapse
YEAH damn i hope it is in an other way repairable
can i not reflash boot loader or something ?

Karsten95 said:
YEAH damn i hope it is in an other way repairable
can i not reflash boot loader or something ?
Click to expand...
Click to collapse
No one could help me then. Maybe way was flashing JB, but you will brick phone because you have P version...

shut_down said:
No one could help me then. Maybe way was flashing JB, but you will brick phone because you have P version...
Click to expand...
Click to collapse
Damn i download now Stock rom with CSC and PIT it doesnt work right ?

Karsten95 said:
Damn i download now Stock rom with CSC and PIT it doesnt work right ?
Click to expand...
Click to collapse
I tried to flash stock FW, but in one file. You can try. Not sure if that would help.

shut_down said:
I tried to flash stock FW, but in one file. You can try. Not sure if that would help.
Click to expand...
Click to collapse
Is there a way that i can save the internal memory? my music, pictures etc.? or are they gone with the wipe ? i will try it if download is done
Hmmm we have here no Samsung Service

YEAH!!! I fixed it YES!
I flashed the PIT File, PDA File and CSC File and i enabled Repartion in Odin... now it flashed Anything new (+Bootloader) and now it works

Karsten95 said:
YEAH!!! I fixed it YES!
I flashed the PIT File, PDA File and CSC File and i enabled Repartion in Odin... now it flashed Anything new (+Bootloader) and now it works
Click to expand...
Click to collapse
Congrats! :good:

Karsten95 said:
YEAH!!! I fixed it YES!
I flashed the PIT File, PDA File and CSC File and i enabled Repartion in Odin... now it flashed Anything new (+Bootloader) and now it works
Click to expand...
Click to collapse
Glad it turn out that way!
Послато са GT-I9070 користећи Тапаток 2

Isn't it just awesome when you get to fix something yourself?
Congratulations

One of the best feelings yeah, nice job
Sent from my GT-I9070 using xda app-developers app

[Q] GT-I9305: Problems After CF Root on 4.3

Hey, folks.
First-time listener, first-time caller.
My Galaxy SIII GT-I9305 originates from Hong Kong.
When I bought it (used, on Kijiji) it was running 4.1.2
When 4.3 finally became available for this model a couple of weeks ago I bit the bullet and installed it using Kies.
I knew 4.3 had issues but I went ahead anyway because I live dangerously, dontcha know.
Today I decided I wanted root so, instead of taking my time and reading the sage advice of kind people like you I jumped right in with ODIN and Chainfire using Instructions I found on these forums and elsewhere.
The rooting procedure seemed to go off without a hitch. Then the phone booted up. Then this started happening:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Selecting "Update" brings me to this:
And anything I do that requires root gives me this:
I tried re-rooting using a different version of ODIN to no avail.
Posters in other threads suggested re-installing SuperSU.
I tried executing superuser.apk using ES File Explorer and got this:
Incidentally, in Download Mode I can see that I've triggerd the Knox Void Warranty Flag, not that I have a warranty.
At this point I just want to get my phone to work as it did with stock 4.3.
What's my quickest route there?

Upgrade SuperSu
Fails in recovery format system cache data and sdcard.
Boot to download mode flash stock rom via Odin.

I don't think the root operation was successful; the Root Checker apps I downloaded hang when I check. I tried launching Titanium Backup and it hangs, too, at "Asking for root rights".
In fact, any time I launch any app that needs root I get the Security Information warning as in my first screenshot.
JJEgan said:
Upgrade SuperSu
Click to expand...
Click to collapse
I don't know how to upgrade SuperSU.
The Play Store says it's already installed, and I see no way to uninstall it.
JJEgan said:
Fails in recovery format system cache data and sdcard.
Click to expand...
Click to collapse
Sorry, the meaning of this statement is unclear to me.
JJEgan said:
Boot to download mode flash stock rom via Odin.
Click to expand...
Click to collapse
Are you suggesting this as a last resort?
I downloaded what looks like the right firmware from sammobile.com. Is that a reliable source?

Boot to download mode flash stock rom via Odin.
Are you suggesting this as a last resort?
No as your knowledge is zero best start from a clean install .
I downloaded what looks like the right firmware from sammobile.com. Is that a reliable source?
Its what we all use .
STICKYS
http://forum.xda-developers.com/showthread.php?t=2344125
UNDERSTAND FIRST
http://forum.xda-developers.com/showthread.php?t=2362743
Network IMEI EFS
http://forum.xda-developers.com/showthread.php?t=2393289

No as your knowledge is zero best start from a clean install .
Click to expand...
Click to collapse
Agreed.
Fails in recovery format system cache data and sdcard.
Click to expand...
Click to collapse
Can you explain what you meant by this? As you know, I'm pretty wet behind the ears.

Custom recovery.
Mounts ans storage
Format = wipes all data .

JJEgan said:
Custom recovery.
Mounts ans storage
Format = wipes all data .
Click to expand...
Click to collapse
I don't have a custom recovery installed. Should I install one? TWRP?
Mounts and storage? What do you mean by that?
Format? As in I should boot into recovery and choose "wipe data/factory reset"? Can't I do that from stock recovery?
Is this something I have to do before I flash the stock firmware? After?
I'm really confused.
p.s. as it turns out the download from sammobile's host, terrafile, has failed six or seven times now. Are there any mirrors?

Rooting is not working withe. The same problem as post 1 has. What is going on with these phones...
Sent from my GT-I9305 using xda app-developers app

Root problem
I too had root problems-rooting OK and then losing it on a restart.This is a GT-I9305 LTE,XXUEMLl5 EE UK firmware and Cf Auto root downloaded from Chainfire's site.I did find 2 versions of the Autoroot file slightly different sizes but both work (up to a point-read on).
So,initially installed 4.3 firmware with PC Odin and Autorooted with same setup.Here's the first catch.As stated by Chainfire,the phone should reboot into stock recovery.If it doesn't you need to do this "manually" and then just reboot-see Chainfire thread.2nd catch.I read somewhere that "Fix permissions" could upset the rooting process,so I wouldn't do that whilst in stock recovery at this stage.
You now should have a rooted firmware but my problem was that if I restarted I would lose the root
My solution was to use Mobile Odin Pro.I know it costs but it did work for me and that make's it worth every penny.Read on.
Whilst you've still got root install the firmware again with MO Pro.This installs root and SuperSu using Everoot.Reinstalling the Supersu or upgrading will possibly tell you that your SU Binary needs updating.When I tried "Normal" it didn't work.At the moment you don't have custom recovery installed,so using MO Pro again install TWRP using their "Open recovery tar" and try updating SU by selecting TWRP/CWM.When script has installed reboot and no more prompt to update binary.I didn't try CWM.Read somewhere it might not work.TWRP does.
Now I have a rooted phone with stock 4.3 on it.Root survives a restart and much use removing all the bloatware that Samsung provide for us.
But that's another story.
I hope this post helps those with root problems.Going through the stages above,working,not working,took a long time but I do now have a rock solid fast 4.3 phone.
Anyone fancy a KitKat?
P.S.Just booted the phone into TWRP and tried fixing permissions.Thankfully still have root but it had a think about it!

Good news:
I managed to update SuperSU— not through Play store but using the superuser.apk file from Chainfire's 1.89 update. It's funny because the version already installed was 1.89.*
I extracted the apk from the package, put it on my external SD card and launched the file using ES File Explorer.
What's also interesting is that I had to try this several times before it worked. Somewhere along the way I also wiped the phone's cache in (stock) recovery mode, although I can't, this morning, recall whether I did that immediately prior to the successful update, although it was definitely some time prior.
*I guess it's not unlike in Windows, when, say, a NIC stops working suddenly, usually a quick driver reinstallation does the trick.

Problem Making Nandroid Backup via Rom Manager

Sir I tried to Make A NANDROID BACKUP from ROM MANAGER
I Already Installed CWM Recovery & TWRP
When I press REBOOT IN TO RECOVERY i am not getting any Option of Making Backup of My Note N7000
Black Screen Appear only
Then I have to restart my Mobile Again pls Help me..Sir
THANK U In Advance

superdude.xi said:
Sir I tried to Make A NANDROID BACKUP from ROM MANAGER
I Already Installed CWM Recovery & TWRP
When I press REBOOT IN TO RECOVERY i am not getting any Option of Making Backup of My Note N7000
Black Screen Appear only
Then I have to restart my Mobile Again pls Help me..Sir
THANK U In Advance
Click to expand...
Click to collapse
How did you install recovery? What's the rom details? Do you want us to aim in the DARK?

You can't install CWM and TWRP at the same time. So my guess: you didn't install one of them successfully and that's the reason for the missing Backup option.
What Rom are you using? If stock rom go to Philz thread and download an install the correct kernel for your version. After that you'll have a recovery with backup options.
---------- Post added at 12:51 PM ---------- Previous post was at 12:51 PM ----------
nokiamodeln91 said:
How did you install recovery? What's the rom details? Do you want us to aim in the DARK?
Click to expand...
Click to collapse
I just did...

nokiamodeln91 said:
How did you install recovery? What's the rom details? Do you want us to aim in the DARK?
Click to expand...
Click to collapse
Sir
I am Giving All the Informations Below Please check it. and i am Attaching The Screenshorts Too sir
Actually Both CWM and TWRP already Installed In my Device I just Update my CWM Recovery Sir. and I just tried to make Nandroid backup By Using Rom Manager When I click to " Reboot In to Recovery" No options appearing for backup and Restore please check the SCREEN SHORTS
and sir After Reboot Red "!" mark with android logo coming
Model : Note N7000 , Rooted
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sir i am a noob just trying to learning the things dont mind pls help me

As I said: go to Philz thread, download a Kernel for your DDLSC and install it. Then you can boot into recovery.
I do not like tools like this for these basic steps - so no help with the tool from me.
And:
please recharge your battery and don't ever try to do things in backup with a nearly empty battery

Del

ThaiDai said:
As I said: go to Philz thread, download a Kernel for your DDLSC and install it. Then you can boot into recovery.
I do not like tools like this for these basic steps - so no help with the tool from me.
And:
please recharge your battery and don't ever try to do things in backup with a nearly empty battery
Click to expand...
Click to collapse
Sir I remember It Next time Sorry sir..
Can you Please provide me a Link of my kernel because in Philz thread there are Many Links and Infos i am Confusing a Bit sir
I hope U understand ( i already posted a screenshort of my kernel ) please provide me a Link so that i download and install it..
and one More Q sir.. if I install a kernel.. before it i have to backup my apps and messages ? or Not ?

Please no PM with the same questions. Asking and answering questions in public is the preferred way.
If you want to understand what you do you'll have to read the threads and try to understand what is written. The thread owner doesn't do this for fun or because he wants to waste time.
You'll find the kernel in post 3 of Philz thread, there is a link after "tw only:". This will bring you to dev-host and folder with different versions (the one with 5.11.2 contains your kernel).
And after downloading please follow the instructions how to install. It really isn't so difficult.
(A final one: please no "sir", absolutely not necessary and makes me feel like I'm at the wrong place)

ThaiDai said:
As I said: go to Philz thread, download a Kernel for your DDLSC and install it. Then you can boot into recovery.
I do not like tools like this for these basic steps - so no help with the tool from me.
And:
please recharge your battery and don't ever try to do things in backup with a nearly empty battery
Click to expand...
Click to collapse
ThaiDai said:
Please no PM with the same questions. Asking and answering questions in public is the preferred way.
If you want to understand what you do you'll have to read the threads and try to understand what is written. The thread owner doesn't do this for fun or because he wants to waste time.
You'll find the kernel in post 3 of Philz thread, there is a link after "tw only:". This will bring you to dev-host and folder with different versions (the one with 5.11.2 contains your kernel).
And after downloading please follow the instructions how to install. It really isn't so difficult.
(A final one: please no "sir", absolutely not necessary and makes me feel like I'm at the wrong place)
Click to expand...
Click to collapse
Sir I Install PhilZ-cwm6-DDLSC-ODD-5.11.2-signed.zip this One.. But Now i reboot My Phone only Samsung GALAXYNOTE Gt N7000 is appearing.. its not starting OMG sir.. what can i do Now.. help me.. i just Installed PhilZ-cwm6-DDLSC-ODD-5.11.2-signed.zip this one ( ( please help me

please Any one Help Me.. My Phone Got Stuck After Installing The PhilZ-cwm6-DDLSC-ODD-5.11.2-signed.zip
What Should I do.. Only SAMSUNG GALAXT NOTE GT-N7000 Appear Help me Please.. please ( ( : ((

Are you telling me now that you did install the kernel with only 14% battery charge?
How did you install it?
Can you boot into the new recovery?

superdude.xi said:
please Any one Help Me.. My Phone Got Stuck After Installing The PhilZ-cwm6-DDLSC-ODD-5.11.2-signed.zip
What Should I do.. Only SAMSUNG GALAXT NOTE GT-N7000 Appear Help me Please.. please ( ( : ((
Click to expand...
Click to collapse
Can you please explain what recovery did you have and how did you install the zip version of the kernel?

ThaiDai said:
Are you telling me now that you did install the kernel with only 14% battery charge?
How did you install it?
Can you boot into the new recovery?
Click to expand...
Click to collapse
No I charged The Battery Bro I just Out This Zip File PhilZ-cwm6-DDLSC-ODD-5.11.2-signed.zip In to External SD Card Then I Switchoff My Cell then.. I press
Volume Up Powerkey and Middle key..
Then I selected UPDATE FROM EXTERNAL CARD
then I Select this File PhilZ-cwm6-DDLSC-ODD-5.11.2-signed.zip
After That it opens and then when I restarted My phone It STUCK (((
only Sansung GALAXY NOTE N7000 Appearing.. ( no Options is Coming Now what to Do ( help me Otherwise I lost My phone..

nokiamodeln91 said:
Can you please explain what recovery did you have and how did you install the zip version of the kernel?
Click to expand...
Click to collapse
First I Put This Zip In My EXTERNAL SD CARD : PhilZ-cwm6-DDLSC-ODD-5.11.2-signed.zip
Then I Switch Of My Phone
Then I Press POwer Switch Middle Switch and Volume Up key...
Then I select the Option Install from External SD
I select the ZIP file
After that android Logo Comes animated revolving logo.. My phone starts but when i restart to see recovery option coming or not My phone Got Stuck and only appearing " Samsung GALAXY NOTE GT -N7000

superdude.xi said:
First I Put This Zip In My EXTERNAL SD CARD : PhilZ-cwm6-DDLSC-ODD-5.11.2-signed.zip
Then I Switch Of My Phone
Then I Press POwer Switch Middle Switch and Volume Up key...
Then I select the Option Install from External SD
I select the ZIP file
After that android Logo Comes animated revolving logo.. My phone starts but when i restart to see recovery option coming or not My phone Got Stuck and only appearing " Samsung GALAXY NOTE GT -N7000
Click to expand...
Click to collapse
Does the phone boot normally? or Not?
Can you get into the CWM philz recovery?

nokiamodeln91 said:
Does the phone boot normally? or Not?
Can you get into the CWM philz recovery?
Click to expand...
Click to collapse
No sir The Phone Not Boot Normally.. After Installing a Zip file When it Stars a Dark Brown Colour Android Logo Coming With Revolving and the phone starts After that i Restart it got STUCK ! Now what can i Do i only wanted to nanddroid backup.. so that my phone will always safe now its gone

superdude.xi said:
No sir The Phone Not Boot Normally.. After Installing a Zip file When it Stars a Dark Brown Colour Android Logo Coming With Revolving and the phone starts After that i Restart it got STUCK ! Now what can i Do i only wanted to nanddroid backup.. so that my phone will always safe now its gone
Click to expand...
Click to collapse
May be better to download DDLSC rom and flash it via Odin to revert most of the changes done to system, recovery and kernel partitions.

nokiamodeln91 said:
May be better to download DDLSC rom and flash it via Odin to revert most of the changes done to system, recovery and kernel partitions.
Click to expand...
Click to collapse
How to get DDLC Rom ? tell me i will Download
and How Odin will Work I dont know and my battery also not showing charging

superdude.xi said:
How to get DDLC Rom ? tell me i will Download
and How Odin will Work I dont know and my battery also not showing charging
Click to expand...
Click to collapse
Follow the install instructions from here:
http://forum.xda-developers.com/showthread.php?t=1424997 and download rom from either sammobile.com or samsung-updates.com/

treacherous_hawk said:
Follow the install instructions from here:
http://forum.xda-developers.com/showthread.php?t=1424997 and download rom from either sammobile.com or samsung-updates.com/
Click to expand...
Click to collapse
I have Successfully Recovered My Mobile With Official Stock Rom Flash Via Odin.
Now.. Am giving Each and every Detail. Please Suggest me How get In to The Recovery Mode.
_______________________________________
I Updated The CWM From Rom Manager.
When I restarted The Mobile and Press Volume Up + Power + Home Button I get Only These Options
Android System recovery <3e>
Volume up/down to move highlight:
power button to select
reboot system now
apply update from ADB
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache
______________________________________
[ here one DEAD ANDROID ICON with RED TRIANGLE]
#manual mode#
--Appling Multi-CSC...
Applied the CSC-code :INU
successfully applied multi-CSC.
==========================================
the Problem is I want To make a Nandroid Backup and I aam Not getting the Option of backup and Restore When I press Reboot In to Recovery Via rom manager.
Screenshot :
In PhilZ Thread Which I have to Download ?
helP me