Related
Hey guys. I recently made a USB otg cable and I have TRR 1.5 ICS rom. when I plug it in Clock selection dialogs pops up. question is Which Rom and kernal paired... would run the USB otg host mode???
I'll appreciate for the help...
AFAIK many had tried to get it going on various ICS Roms, and no-one succeeded. Do let us know if you manage to connect it.
Sure dude... But its the ICS kernal which doesnt have OTG support right... ???
Galaxy note
Yeah, it seems so.
hey guys,
First I think I dont need to open a new thread for my question.So asking it here.Has anyone managed to connect another android phone as host to your note?I tried with my old nokia 2700 and it works and when I tried to connect my sgs it didnt but it charges in ac mode.So anyone tried to connect your android phone to your Gnote?
Hi there,
I need some help here..my p990 usb only charges when connect to pc or playstation 3. I know it isn't a driver problem because i have already tested other two p990 at my pc and both devices are recognized/usb work.
I've tried smartflash/nvflash but the device can't be recognized by windows..
So, can i assume the usb hardware is dead :crying:? any tip for fixing this matter ?
Thanks in advance,
Nardocf said:
Hi there,
I need some help here..my p990 usb only charges when connect to pc or playstation 3. I know it isn't a driver problem because i have already tested other two p990 at my pc and both devices are recognized/usb work.
I've tried smartflash/nvflash but the device can't be recognized by windows..
So, can i assume the usb hardware is dead :crying:? any tip for fixing this matter ?
Thanks in advance,
Click to expand...
Click to collapse
Maybe the issue is the cable mate.'......try to change it.
Hope it helps
O2X with Magical ROM and supersonic kernels from my buddies
Hm... Tell us something more about the ROM, baseband and everything you have now on it ?
SREEPRAJAY said:
Maybe the issue is the cable mate.'......try to change it.
Hope it helps
O2X with Magical ROM and supersonic kernels from my buddies
Click to expand...
Click to collapse
I already done this but the usb won't work and the same cable works with another p990. :crying:
torq1337 said:
Hm... Tell us something more about the ROM, baseband and everything you have now on it ?
Click to expand...
Click to collapse
At the moment with Gueste2X_GoodBye-2.0 + gestekrnl 2.1 without oc, baseband 0725.
Did you try to switch mode? From "mass storage" to "mtp"?
amagyar said:
Did you try to switch mode? From "mass storage" to "mtp"?
Click to expand...
Click to collapse
No. How can i try this?
go to Settings->Storage-> hit the menu button -> USB-Connection(PC) -> choose between the options.
Actually I'm having the same issue. But I'm really sure my USB port is broken.
The device just isn't recognizing that it is being plugged into something.
(And I tried everything anyone ever reccomended on the USB not working matter)
I just use a cardreader to put stuff on my SDcard. I just hope I never have to repair my device via NVFlash. That's impossible now.
Other than that it's not a big deal for non-devs
Iconoclasm said:
go to Settings->Storage-> hit the menu button -> USB-Connection(PC) -> choose between the options.
Actually I'm having the same issue. But I'm really sure my USB port is broken.
The device just isn't recognizing that it is being plugged into something.
(And I tried everything anyone ever reccomended on the USB not working matter)
I just use a cardreader to put stuff on my SDcard. I just hope I never have to repair my device via NVFlash. That's impossible now.
Other than that it's not a big deal for non-devs
Click to expand...
Click to collapse
Can't enter into this menu usb-connection(pc) when i press menu button nothing happens.. I think we are in the same boat because my phone can't be recognized in apx mode/ sw mode ..
Iconoclasm said:
go to Settings->Storage-> hit the menu button -> USB-Connection(PC) -> choose between the options.
Actually I'm having the same issue. But I'm really sure my USB port is broken.
The device just isn't recognizing that it is being plugged into something.
(And I tried everything anyone ever reccomended on the USB not working matter)
I just use a cardreader to put stuff on my SDcard. I just hope I never have to repair my device via NVFlash. That's impossible now.
Other than that it's not a big deal for non-devs
Click to expand...
Click to collapse
The same is happening with my p990 to. I can´t connect to pc with pc connection. To transfer data i use the card reader or with airdroid who it make with wifi.
Others users that had this problem they sent the phone in warranty and Lg have changed their mainboards. So if you have warranty go and solve your problem with your LG shop. It´s seems that is not any solution to solve this annoying problem with this bad hardware
Hello, same problem here. Well, "you need to send it to LG".. but there's one problem. I have MIUI and I can't flash back original ROM without nvflash. How to deal with it?
Try this: open LG update tool > options > "?recover (phone)? " > do by imei > enter serial and imei. LG update tool checks baseband for updates, for recovery idk, but I guess recovery cm only needs the numbers entered. Worth a try, and I'd like to know too.... Thanks Ferrum Master, you made me know about this function
SuperSkill said:
Try this: open LG update tool > options > "?recover (phone)? " > do by imei > enter serial and imei. LG update tool checks baseband for updates, for recovery idk, but I guess recovery cm only needs the numbers entered. Worth a try, and I'd like to know too.... Thanks Ferrum Master, you made me know about this function
Click to expand...
Click to collapse
well at mine don´t works. thank you very much for you solution.
I have the same problem. It's not possible to connect to the phone either by LG tool or as mass storage. I've tried different cables, computers and cleaning the connector in the phone without success. I'm running stock GB.
I would really like to root the phone to be able to flash CM10. Is there any way to do this without USB connection?
Edit: I've already tried NVFlash and SuperOneClick
I had the same problem last weeked and i manage to solve it, im busy right now but I promise i'll tell you how i solved it later today or tomorrow
Sent from my Optimus 2X using xda app-developers app
Nardocf said:
Hi there,
I need some help here..my p990 usb only charges when connect to pc or playstation 3. I know it isn't a driver problem because i have already tested other two p990 at my pc and both devices are recognized/usb work.
I've tried smartflash/nvflash but the device can't be recognized by windows..
So, can i assume the usb hardware is dead :crying:? any tip for fixing this matter ?
Thanks in advance,
Click to expand...
Click to collapse
Hey hello, I wrote yesterday and told you that I would teach you how to fix this bug, I'm almost done with the tutorial, I had to make all over again so I could tell you step by step, unfortunately, the fix I found is temporal, so, I'm trying one more thing to see if I can make it permanent, and also, i'm wating for Hulk to answer me where to post this fix, 'cuz you're not the only one with this problem, so I think would be better to create a thread with my solution, i'm sorry if I could not give you the instruccions today but I think later today or tomorrow hulk will tell me where to put it, as soon as I post the solution, I'll post here a link to the thread, just wait a bit more
greetings
I just posted my solution, you might want to give it a shot
Look here
http://forum.xda-developers.com/showthread.php?p=33870935#post33870935
Hi guys, I've been waiting for a custom Rom for this device.
I recently installed C-ROM final ( and all the needed stuff ) onto it, but now, no USB connection to Windows Computer can be done.
The device seems to be no more recognized. So my question is, did I missed something ? Should I install another driver to get things back to normal ?
Thanks in advance for to those who will take a lil bit of their time to answer me
sand9jack said:
Hi guys, I've been waiting for a custom Rom for this device.
I recently installed C-ROM final ( and all the needed stuff ) onto it, but now, no USB connection to Windows Computer can be done.
The device seems to be no more recognized. So my question is, did I missed something ? Should I install another driver to get things back to normal ?
Thanks in advance for to those who will take a lil bit of their time to answer me
Click to expand...
Click to collapse
I would normally ask you to provide a log cat over adb but as you don't have usb you need to do it differently. Install Catlog from the playstore and see if it detects anything when you plug it into your PC.
Which kernel did you choose when you installed CROMi-X?
sbdags said:
I would normally ask you to provide a log cat over adb but as you don't have usb you need to do it differently. Install Catlog from the playstore and see if it detects anything when you plug it into your PC.
Which kernel did you choose when you installed CROMi-X?
Click to expand...
Click to collapse
Ok I have done it. On the log I can see that "mUSBOnline" is always equal to = false...
Is there a way to definitely change these value to get USB available ?
From a kernel pov, I choosed the "modded stock" one!
sand9jack said:
Ok I have done it. On the log I can see that "mUSBOnline" is always equal to = false...
Is there a way to definitely change these value to get USB available ?
From a kernel pov, I choosed the "modded stock" one!
Click to expand...
Click to collapse
Can you upload the logcat output please.
sbdags said:
Can you upload the logcat output please.
Click to expand...
Click to collapse
Sorry I did not thought of uploading it btw. You can find attached now ! ^^
sand9jack said:
Sorry I did not thought of uploading it btw. You can find attached now ! ^^
Click to expand...
Click to collapse
Well from that logcat the tab thinks it is plugged into ac power not USB.......
sbdags said:
Well from that logcat the tab thinks it is plugged into ac power not USB.......
Click to expand...
Click to collapse
So what's the point to get it work properly from now ?
sand9jack said:
So what's the point to get it work properly from now ?
Click to expand...
Click to collapse
No idea tbh - try switching usb debugging on in developer settings? See if that triggers it?
sbdags said:
No idea tbh - try switching usb debugging on in developer settings? See if that triggers it?
Click to expand...
Click to collapse
Nothing triggered, as expected... ):
I don't really know what to investigate further tbh
sand9jack said:
Nothing triggered, as expected... ):
I don't really know what to investigate further tbh
Click to expand...
Click to collapse
Neither do I mate. Is it possible it's the cable or your USB Port on your PC?
Hi everyone,
I would use my mouse/usb key on my HTC desire 510. If i understood after my researches,that's not possible on all smartphone...
So, is that possible on our HTC ?
Thanks for your future answers !
yes our stock kernel supports usb otg, as well as supplying power out. i use a 32gb sandisk usb flash drive with my 510.
Thanks for your answer.
So, i bought this the hama otg (i cannot send a link) but when i plug it in my phone, i get a message like "Phone in host mode, impossible to..."
I root it with your img.
alain21218 said:
Thanks for your answer.
So, i bought this the hama otg (i cannot send a link) but when i plug it in my phone, i get a message like "Phone in host mode, impossible to..."
I root it with your img.
Click to expand...
Click to collapse
It shouldn't be much of an issue. It does that for me too but still works, do any other errors present themselves?
Sent from my XT1028 using XDA Free mobile app
Well, i just plug the otg in my phone, without other usb. It show me "Phone in USB host". I tried with OTG checker, my kernel is ok but no signal detected by the application.
I tried to turn off the phone, & remove the battery, then put in again & turn on. When i plug in the OTG, nothing appened for a moment then the cursor of the mouse that i connected in the OTG appear for just 1 second, like a flash & the message back again.
No other problems
Today i tried to make my own OTG usb to see if the problem is the phone or the OTG hama.
When i plug my own OTG usb, nothing happen. When i plug the other OTG i just get the same message i said in my previous answers, nothing else happen.
Any idea ? I don't know but is anything i have to do like turn ON USB debug or anything else ?
Edit: I got a Xperia today to try my OTG, it seems that he works well so i just need to ask: Is the HTC desire 510 64bits EU is compatible OTG ? If it is, why my phone don't recognised my OTG ?
Still need some answers here
It just not support USB HID over USB (mouse and keyboard). Could've been disabled by HTC (reason for cursor disappearing after 1 sec of plugging in).
Sent from my XT1028 using XDA Free mobile app
Hi ! Sorry for insisting but i read on official htc web site that the htc desire 510 support usb storage. So, why nothing else that the previous message happen.
I bought another OTG today & it's forever the same...
I want to bump this topic, I have european 64-bit version and when I connect OTG cable there's info shown about phone being in usb host mode but nothing else is happening.
My thought is that tey give this option to 32-bit US version and then disable it (clumsy) in european version.
Sorry for grammar, english is not my native language.
I dont personally own a desire 510 but I know that 90% of otg issues are with the cable... Try another cable because all are not the same...
undeadking said:
I dont personally own a desire 510 but I know that 90% of otg issues are with the cable... Try another cable because all are not the same...
Click to expand...
Click to collapse
I have two cables, both work great wirh other devices .
Hi,Have u already fix ur desire 510 problems?
I already changed 3 different otg cables, seems like the same problem as u met....Any suggestions?
I had that issue when I flashed a moded kernel. Had to go back to a stock kernel and it fixed the usb issue
Sent from my 0PCV1 using XDA Free mobile app
USB OTG pops up a message in the notifications bar to let you know that you cannot simultaneously charge your device and utilise an USB device. The only reason that I can think of why the mouse cursor would disappear after a second is because you have your finger on the screen. I use my OTG with my digital camera (via Google Photos), USB Keyboard, USB Mouse, another Android device, and a 64GB flash drive almost daily, and I don't seem to have any problems.
Hello,can you please explain the details for that?
Crutchie46 said:
I had that issue when I flashed a moded kernel. Had to go back to a stock kernel and it fixed the usb issue
Sent from my 0PCV1 using XDA Free mobile app
Click to expand...
Click to collapse
I mean,,,I dont know how to go back to a stock kernel, should I root the phone?I really need this otg function for my desire 510 as I dont have enough money to buy another android phone. Appreciate for your help!
healthybanian said:
I mean,,,I dont know how to go back to a stock kernel, should I root the phone?I really need this otg function for my desire 510 as I dont have enough money to buy another android phone. Appreciate for your help!
Click to expand...
Click to collapse
If your phone is not rooted and doesn't have a custom recovery installed on it then there is no way possible that you're using a different kernel, that means that you already have the stock kernel! Is your phone 64 bit?
MrMike2182 said:
If your phone is not rooted and doesn't have a custom recovery installed on it then there is no way possible that you're using a different kernel, that means that you already have the stock kernel! Is your phone 64 bit?
Click to expand...
Click to collapse
I am not sure, the kernel version is 3.1028-g72f7e8d and @AbM103#1 SMP PREEMPT, the last two digits of serial number is 64 so does this mean it is 64bit? Thanks in advance
healthybanian said:
I am not sure, the kernel version is 3.1028-g72f7e8d and @AbM103#1 SMP PREEMPT, the last two digits of serial number is 64 so does this mean it is 64bit? Thanks in advance
Click to expand...
Click to collapse
Where are you from? If you're in the USA then it more than likely is 32 bit but if you're in another Country it's a really good chance that you're using a 64 bit and from what I've read about it the 64 bit for some reason or another doesn't work correctly with the usb otg and I can't exactly do anything to help with that since I don't have access to any 64 bit phones.
MrMike2182 said:
Where are you from? If you're in the USA then it more than likely is 32 bit but if you're in another Country it's a really good chance that you're using a 64 bit and from what I've read about it the 64 bit for some reason or another doesn't work correctly with the usb otg and I can't exactly do anything to help with that since I don't have access to any 64 bit phones.
Click to expand...
Click to collapse
Australia...probably it was ordered from USA , I will ask the one who ordered this phone,,,Thanks for your help
Hello,
i can't get the otg connections to work.
root is essential to use it or can you unlock it even without it?
GattMatt said:
Hello,
i can't get the otg connections to work.
root is essential to use it or can you unlock it even without it?
Click to expand...
Click to collapse
My OTG works without problems and without root. Flash drives, mouses, keyboards ... everything works
then why doesn't it work for me?:crying:
maybe some options should be activated?
Tried audio DAC and USB stick, seems fine
Try this:
Settings/about phone/all specs/click on kernel version 4times ( entering the 'CIT" )
Now you can Test OTG modus and more stuff
tried ... it doesn't work. I make one last attempt by changing adapter
GattMatt said:
tried ... it doesn't work. I make one last attempt by changing adapter
Click to expand...
Click to collapse
You should change your adaptor and change your pen drive. I think this is the problem. After changing dose if the result is same then you you have to contact with service centre because of faulty OTG connection
Ok, that was the bad adapter. but even the new sometimes goes, and sometimes it doesn't. ?