Few days ago i unlocked my phone using this method http://forum.xda-developers.com/show....php?t=2137840 , reinstalled IZS but now when i plug my phone into wall socket it shows charging slowly and it charges slowly.
It`s same cable same charger same phone same battery same socket.. so what am i doing wrong?
I already wiped data / factory reset and reflashed other roms , tryed other charger other wall socket .. nothing helps.
Someone else with this problem ?
i have that problem too.
reason was, the miniusb slot was corrupted at my phone.
i have to plug it in a specific angle.
go to settings -> Battery
plug the charger in, if it shows (USB) even while using the AC-Charger, your slot is corrupt too.
try to plugin and plugout until it shows (AC) and it should load with full power.
also custom roms may drain more battery than your stock ones, a solution would be to lower the maximum CPU Frequenzy and lower you screen brightness, because they may use more battery than the charger can load ;P
Related
Hello everyone,
I have weird problem with my kaiser - it doesn't charge. I tried everything what comes to my mind, but maybe someone will have some new ideas.
When plugged in, yellow LED turns on and it says "charging" in the OS, but battery keeps loosing charge. It doesnt matter if I'm trying to charge it via stock charger or over USB. USB port on device is communicating normally - i can access phone memory or SD card from computer over USB, and I checked that "dont charge over USB" is NOT ticked.
I found Kaiser dead in the morning while on wall charger, with yellow LED on. Tried to charge over USB, same thing happens.
I then opened the device (thanks for nice guide for taking kaiser apart) and confirmed that situation is as following:
- voltage on inner contacts of usb (on the PCB side) is 4.5V
- voltage on the pcb side of the battery contacts is 0.8V when plugged in, and when yellow LED is turned on (I believe that in this situation there should be full 4.5V from USB port which i measured and confirmed that is really there on the USB)
- I tried to charge battery individually, (out of the device) and it takes charge normally and keeps it (for a 2 years old device and battery thats great)
- tried to reflash stock rom - all went well (another confirmation that usb is working), but no change, battery still wont take charge
Phone specification:
Kaiser 130 (T-mobile MDA Vario III)
Hard SPL 3.56
ROM and radio: Stock t-mobile 6.1
Battery: stock DynaPack
So it seems that im in the market for new PCB or Kaiser with broken screen or flat cable - offers on pm, please
Oh, it seems that i was able to solve what red LED means - it simply means that there is no (or either failed or inadequate) battery while USB is plugged in and should be charging - but that doesnt mean that it is main battery - there is another small backup battery on PCB. That is my observation, was unable to check it in literature or service manual if im right with that opinion, but i do hope that i helped someone with RLOD
Have a nice day,
darko
bump! anyone?
curious, havwe you tried another battery? You can get them on ebay for $5-$10. I killed my USB plug, I was able to connect with USB, but it would not charge. So I purcahsed a 3-in-1 adapter (which supports the usb plug on top ane bottom), when that finally died I purchased a cradle with extra battery charger. I just keep the spare battery it in and swap them when one dies. No charger needed.
I can help maybe. It has to do with the software. The USB connector can't be the porblem otherwise it would not see the power and let the Red LED turn on. In older devices and some of the new is a lock. It prevents you from charging the phone with a charger not made by HTC. There is a cab called Batfix.cab (Or anything like that). Try to install it. Maybe it helps. The 0.8 Volt only can be normal cause the voltage has to do with the battery. If you take it out the System won't try to charge it cause it doesn't get any power from the battery. That is done to prevent it from charging a fully dead battery cause that could harm your device and yourself cause the battery may explode.
j101399j said:
curious, havwe you tried another battery? You can get them on ebay for $5-$10. I killed my USB plug, I was able to connect with USB, but it would not charge. So I purcahsed a 3-in-1 adapter (which supports the usb plug on top ane bottom), when that finally died I purchased a cradle with extra battery charger. I just keep the spare battery it in and swap them when one dies. No charger needed.
Click to expand...
Click to collapse
hi, I want to buy a non USB charger so I can plug my battery in and charge it without the phone needing to be present. What charger did you buy, can you post a link or a pic etc. thanks!
Recently my X1 cannot be charged with USB cable through wall outlet & even car charger , but able to charge with USB cable through PC.
Anyone do encounter the same problem?
Well that's a strange one - how long was it connected to the wall?
Without getting into the discussion about volts and amps provided, and amps drawn by the phone, any method should charge.
In terms of speed, I would think the wall would charge fastest (see above), and the USB slowest.
Did the phone show on the top bar, the charging icon when attached to the wall? Or after a period of time there was no increment in the % charge showing??
If the battery was down to 0%, you probably wouldn't see an immediate increase in the % charge. The % charge is orientative, especially at both ends of the scale.
paul c said:
Well that's a strange one - how long was it connected to the wall?
Without getting into the discussion about volts and amps provided, and amps drawn by the phone, any method should charge.
In terms of speed, I would think the wall would charge fastest (see above), and the USB slowest.
Did the phone show on the top bar, the charging icon when attached to the wall? Or after a period of time there was no increment in the % charge showing??
If the battery was down to 0%, you probably wouldn't see an immediate increase in the % charge. The % charge is orientative, especially at both ends of the scale.
Click to expand...
Click to collapse
I do agree with you. Charging with wall outlet is faster. Therefore, normally I'm charging my X1 with wall outlet, unless in office, will use PC USB.
Top bar never show charging icon, but once I charge it with PC USB, the charging icon show up immediately.
It seems like no power for the USB when connected to the wall outlet. I've tested with battery removed, plugged in USB cable connected to wall outlet, there is no charging illumination light. I cannot power on it.
I tried to recall, it happened after I used a USB charger for my MP3 player. The next day, when I tried to charge with car charger. To my surprise, the USB connection notification showed up (I do remember, while charging with wall outlet or car charger, it will never prompt me for USB connection).
I don't think, it is the ROM issue. Try a few ROM still having the same problem.
From now, I got to live with PC USB :|
X1 Charging problem
I have same problem. I can not charge via both USB-PC and Wall. In order to charge the phone, I have to switch it off and then charge it.
This happened after I used CHEAP car charger from dealexteme.com
Now everytime I want to charge my phone, I have to switch it off.
torquefever said:
I have same problem. I can not charge via both USB-PC and Wall. In order to charge the phone, I have to switch it off and then charge it.
This happened after I used CHEAP car charger from dealexteme.com
Now everytime I want to charge my phone, I have to switch it off.
Click to expand...
Click to collapse
let's me try with power off charging with wall outlet
well thats why se said USE only original accessories...you need to change the power ic on the board.
donottouch said:
well thats why se said USE only original accessories...you need to change the power ic on the board.
Click to expand...
Click to collapse
will the SE service centre entertain changing 'power ic'?
make sure your charger have an out put minimum is 1.Ah ,if lest than that it will not work , that is the troublem
nguyennghiep said:
make sure your charger have an out put minimum is 1.Ah ,if lest than that it will not work , that is the troublem
Click to expand...
Click to collapse
I'm using the original SE charger!? I would not think the problem with the charger, but my X1 was screwed by the incompatible MP3 USB charger
Yep same with me, not sure why mine started doing that though, I never got used a cheap charger. Maybe its the rom... I am trying a new one now.
torquefever said:
I have same problem. I can not charge via both USB-PC and Wall. In order to charge the phone, I have to switch it off and then charge it.
This happened after I used CHEAP car charger from dealexteme.com
Now everytime I want to charge my phone, I have to switch it off.
Click to expand...
Click to collapse
digitalspree said:
Yep same with me, not sure why mine started doing that though, I never got used a cheap charger. Maybe its the rom... I am trying a new one now.
Click to expand...
Click to collapse
it's not caused by the ROM, I'm very sure. I've installed different ROM. The problem still exist.
I am having a similar problem. When the phone completely discharges , i am unable to charge it with any power adapter or even car charger. I have to initially charge the phone using a PC , then after the power is around 15% , then the phone gets charged with a normal adapter.. any suggestions??
same problem. It happends when the battery is completely discharged.
what I do is use a charger w/ low amp rating (.1) and plug it in for at least 10-20min. Give it some time, it will start charging after a while (indicated by the blinking lights). After that, you can turn it on and charge it normally
I had a similar problem twice.Both times I solved it by replacing the charger.
the same happen to me and i have another issue
my xperia doesnt work as usb mass storage!!!
the solution was buying another charger but..the usb mass storage issue still not working as a flash drive!!
luirhy said:
same problem. It happends when the battery is completely discharged.
what I do is use a charger w/ low amp rating (.1) and plug it in for at least 10-20min. Give it some time, it will start charging after a while (indicated by the blinking lights). After that, you can turn it on and charge it normally
Click to expand...
Click to collapse
It works with Z1 too. Thanks a lot!
I guess something goes wrong with battery controller
Hello there,
Its a but weird but hey this is something very normal for the 2x I think. When I plug in the phone to the pc, this will identify the phone and all that, but it will not charge. I have tried different USB slot and other PCs but nothing happens. On Power the phone will charge as normal. I have also down a calibration of the battery..
Anyone?
I just had the same thing happen to me. I'm glad I read about your wall charger suggestion . Then I read about another person who pulled their battery out and long pressed the power button to clear any risidual charge, I did that and when I turned back on it had gone from 1% to 5%. This was after useing 'battery calibrator' which deletes that file. I also have battery monitor widget and wonder if it conflicts, I think I entered a random number when it asked me the wall chargers ampage. Who knows it charges from computer again. My mother had a problem similar on her nokia, she let the charge get to low and they had to 'shock' the battery into life.
- actually if you have the mode where the screen stays on then the phone might just consume all the power.
-nope, seems wall charger is super fast and computer is slow, maybe usb just doesnt have as many amps
check your usb cable, cheap china cable have problem with charging
I got another cable, GOLD!, and did more testing, its a slow charge on computer and charge goes down when playing counter-strike. Charge goes up on wall socket when playing CS. The charger says it puts out 1A and im sure that more than what my laptop USB puts out, maybe I'll try it with my desktop.. debug mode did nothing to change the effects.
hi all, i am using my note for more than 3 months with non original charger, and usb cable also sn't original, but my phone was charging well, but i upgraded to JB then reverted back to ICS, and now when i put my device on the charger or USB, and without using it, i see in battery status that my phone isn't charging, but the charging animation is working, and i see that it is charging in the lock screen, and my phone drain very fast,
i installed battery monitor widget, and it show me "USB Charger" but give me Discharging, and charging randomley, and when it gives me discharging i see in the battery health error like" unspecified error ocured"
as i said, it just charge fine some times, and some other times it gives me "discharging", i was using this USB, And the charger for more than 3 months without any problem
don't know if it i software or hardware related
any idea ?
sorry for my bad english
two things you can try...
1. Flash to stock GB and try charging it again.
2. if you tried step 1 and still doesn't work, try replacing your charger/usb cable and/OR, CLEAN OUT your usb charge port on your phone. Perhaps there's some lints and dusts there already that have accumulated overtime, causing your issue/s at hand.
letters_to_cleo said:
two things you can try...
1. Flash to stock GB and try charging it again.
2. if you tried step 1 and still doesn't work, try replacing your charger/usb cable and/OR, CLEAN OUT your usb charge port on your phone. Perhaps there's some lints and dusts there already that have accumulated overtime, causing your issue/s at hand.
Click to expand...
Click to collapse
Thanks fot your help, yes trying the GB rom will be the best choice to know if this issue is software related
thanks again
Hello everyone i'm facing a weird problem i installed syberia os 1.4 and last 2.0 and my phone won!t charge anymore .
Of course i did a clean install (wipe system cache dalvik data and even format data) with right firmware. When in recovery its sometimes charging but only for a few minutes . when charger is plugged it says it's connected but can't charge at the moment. I have no idea what the f... Is going on. I also tried arrow os and same issue.
I have no problem with revolution os (miui based)
Any clue?
Edit: finally the same problem occured with ROS Time to get a new phone?
Had a similar problem with a broken charger. Phone thought it would be charging but battery drained while connected to this charger.
I checked the chargers output and it was 3.3V instead of 5V.
I guess you tried different charger and cable?
mpunkt said:
Had a similar problem with a broken charger. Phone thought it would be charging but battery drained while connected to this charger.
I checked the chargers output and it was 3.3V instead of 5V.
I guess you tried different charger and cable?
Click to expand...
Click to collapse
3 cables and 2 chargers (1 brand new)
have you had a hardware problem lately?
Maybe you have to change the battery
I have the same problem. Before I flash the SyberiaOS in , I was running a Miui 10 on my phone. The same charger and the same cable, won't work just after flashing of the new syberiaos. Icon on the status bar indicates battery is charging, but the charging led never lights up.
The cable is only for charging use, not for data connection. When I use a data cable instead, and everything is fine.
Obviously the problem is caused not only by charger cable, and also the syberiaOS.
Any other solution?
Thanks!!!