Hello,
I have an LG P880 and I had the Torch app with the flash on.
I accidentally dropped the phone and it fell with the screen down and the flash went off.
When I went so see what happened I noticed that the battery was still attached.
I tried to turn on the phone but to no avail. The power button seems to be working as I can hear it click, but the screen doesn't turn on.
Later tried to connect the phone to my PC to check if it connected in download mode, but it didn't. ADB doesn't recognize any devices either.
I don't know what else I can try.. I had some notes on the internal memory that I can't reach and I really needed them..
Does anyone know of a way to extract information from the internal memory?
The phone is still on warranty and I don't see any screws that have a void stamp. If needed I can disassemble it.
It was running CM 10.1 stable.
Thank you for your time
tyraek said:
Hello,
I have an LG P880 and I had the Torch app with the flash on.
I accidentally dropped the phone and it fell with the screen down and the flash went off.
When I went so see what happened I noticed that the battery was still attached.
I tried to turn on the phone but to no avail. The power button seems to be working as I can hear it click, but the screen doesn't turn on.
Later tried to connect the phone to my PC to check if it connected in download mode, but it didn't. ADB doesn't recognize any devices either.
I don't know what else I can try.. I had some notes on the internal memory that I can't reach and I really needed them..
Does anyone know of a way to extract information from the internal memory?
The phone is still on warranty and I don't see any screws that have a void stamp. If needed I can disassemble it.
It was running CM 10.1 stable.
Thank you for your time
Click to expand...
Click to collapse
try removing the battery, plug a usb connected to a pc, whilst holding volume down, if it goes into software download mode, you can restore it by flashing the original firmware through kdz.
zri said:
try removing the battery, plug a usb connected to a pc, whilst holding volume down, if it goes into software download mode, you can restore it by flashing the original firmware through kdz.
Click to expand...
Click to collapse
Thank you for your reply, but I have already tried that. The screen doesn't even turn on.
Another interesting thing that I found is that in complete darkness, I remove and insert the battery and try to turn it on. The lights on the touch buttons slightly blink and the phone doesn't do anything else.
tyraek said:
Thank you for your reply, but I have already tried that. The screen doesn't even turn on.
Another interesting thing that I found is that in complete darkness, I remove and insert the battery and try to turn it on. The lights on the touch buttons slightly blink and the phone doesn't do anything else.
Click to expand...
Click to collapse
If the phone does not turn on, something has probably broken inside the phone, due to you dropping it. You could try to get it repaired and hope the info will stay on it, or you could disassemble yourself and see if you can spot the problem and repair it yourself.
chasepoes said:
If the phone does not turn on, something has probably broken inside the phone, due to you dropping it. You could try to get it repaired and hope the info will stay on it, or you could disassemble yourself and see if you can spot the problem and repair it yourself.
Click to expand...
Click to collapse
Thank you for your reply, I will send it to warranty tomorrow probably. I disassembled everything except the touch screen and it seems everything is in place, since I'm don't have the knowledge for anything else and don't want to break any seals if any exist
More information: I can turn it on to the APX mode apparently (volume up + volume down + power on), however Windows says it is an "Unknown device" and doesn't even provide a vendor/device ID so no driver can be installed for the device..
Hope they can salvage my data or I'll have a hard time trying to remember my notes lol
tyraek said:
Thank you for your reply, I will send it to warranty tomorrow probably. I disassembled everything except the touch screen and it seems everything is in place, since I'm don't have the knowledge for anything else and don't want to break any seals if any exist
More information: I can turn it on to the APX mode apparently (volume up + volume down + power on), however Windows says it is an "Unknown device" and doesn't even provide a vendor/device ID so no driver can be installed for the device..
Hope they can salvage my data or I'll have a hard time trying to remember my notes lol
Click to expand...
Click to collapse
probably something inside the phone has broken as stated above, i have never heard of this APX mode and i wouldn't mess around with it, i have bricked my LG devices several times and have only fixed it with kdz
zri said:
probably something inside the phone has broken as stated above, i have never heard of this APX mode and i wouldn't mess around with it, i have bricked my LG devices several times and have only fixed it with kdz
Click to expand...
Click to collapse
The APX mode is like recovery mode but on a deeper level. You use nvflash with it. If you can't get to this mode nothing else will work more info here
I sent it to warranty, they said they will contact me within 5 days
tyraek said:
The APX mode is like recovery mode but on a deeper level. You use nvflash with it. If you can't get to this mode nothing else will work more info here
I sent it to warranty, they said they will contact me within 5 days
Click to expand...
Click to collapse
well thats some good news, goodluck with that
Related
I was reflashing my phone, while in download mode, the power went off, and now my phone won't turn on or anything. I think my phone is bricked.
I bought the phone a week and a half ago. Will AT&T accept my phone for a replacement if I say it just stopped working? I have the $4.99/month Wireless Insurance, but won't they deny it when they find out I've been messing with it? What should I do?
Thanks!
Before you take it back, make sure it isn't bricked. Remove the battery, replace it, hold both the volume buttons, plug in the usb and see if it takes you to download mode
Sent from my Samsung SGH-i897
Kaik541 said:
Before you take it back, make sure it isn't bricked. Remove the battery, replace it, hold both the volume buttons, plug in the usb and see if it takes you to download mode
Sent from my Samsung SGH-i897
Click to expand...
Click to collapse
It's bricked. Replaced battery, won't turn on no matter what I do to it.
There's a small scratch on the screen, and the micro USB charging port cover is messed up a bit from something sticky getting in there.
What should I tell AT&T? What's the likeliness of them declining my claim? Can they tell that it's been tampered with even though it's bricked?
Wrong forum. But I would use my insurance instead and tell them it just quit on me...
Try plugging into the computer, remove the battery reinsert the battery. Then hold volume up and power till red text comes on the screen from there switch to holding both volume buttons down and power then when the red text flashes to black release power and continue to hold both volume buttons. That should get you back to the downloading digger bot.
Tehwall said:
It's bricked. Replaced battery, won't turn on no matter what I do to it.
There's a small scratch on the screen, and the micro USB charging port cover is messed up a bit from something sticky getting in there.
What should I tell AT&T? What's the likeliness of them declining my claim? Can they tell that it's been tampered with even though it's bricked?
Click to expand...
Click to collapse
They won't give you a hard time on the software side - to them off is off - they can't tell if you bricked it - they will send it somewhere and have it flashed.
BUT - if there is something sticky in the USB port then they do have grounds to deny your claim - for all they know you poured juice in there.
Good luck.
Get it into download mode and flash it again with odin. Likely not bricked.
Sent from my SAMSUNG-SGH-I897 using XDA App
alphadog00 said:
They won't give you a hard time on the software side - to them off is off - they can't tell if you bricked it - they will send it somewhere and have it flashed.
BUT - if there is something sticky in the USB port then they do have grounds to deny your claim - for all they know you poured juice in there.
Good luck.
Click to expand...
Click to collapse
If there is something sticky there it means he put something sticky there lol.
And also, follow thedamn directions people are giving you man. Your phone isntbricked, I dont even know of anyone who has bricked their phone yet..
Mattwp103 said:
Try plugging into the computer, remove the battery reinsert the battery. Then hold volume up and power till red text comes on the screen from there switch to holding both volume buttons down and power then when the red text flashes to black release power and continue to hold both volume buttons. That should get you back to the downloading digger bot.
Click to expand...
Click to collapse
votum said:
If there is something sticky there it means he put something sticky there lol.
And also, follow thedamn directions people are giving you man. Your phone isntbricked, I dont even know of anyone who has bricked their phone yet..
Click to expand...
Click to collapse
I tried everything suggested, nothing happens. The power went out, while flashing new firmware, now the phone won't turn on no matter what I do. I already tried peoples suggestions.
Tehwall said:
I tried everything suggested, nothing happens. The power went out, while flashing new firmware, now the phone won't turn on no matter what I do. I already tried peoples suggestions.
Click to expand...
Click to collapse
The AT&T screen doesn't come up?
Guys we have been told a gazillion times about this...what does this have to do with Development?! Jesus....
Which firmware were you using at the time and which one were you flashing?
also make sure the battery is charged
prestopasto said:
The AT&T screen doesn't come up?
Click to expand...
Click to collapse
Nothing does, I tried every combo, SIM card in and out, replacing battery, USB plugged in and out, download mode, regular power button, recovery mode, what the guy suggested above; everything.
Not a single thing shows up on the screen.
You glanced over my question.
The version of firmware you were using before the flash and during the failed flash can be very pertinent to the key combination you need to get into download mode =P
Zilch25 said:
You glanced over my question.
The version of firmware you were using before the flash and during the failed flash can be very pertinent to the key combination you need to get into download mode =P
Click to expand...
Click to collapse
I had the stock firmware, installed the JM5 firmware, reinstalled the JM5 firmware, while doing so, they power went off.
Just pressing Volume Down + Power got me into Download Mode everytime.
Edit: And yes, the battery was charged, it was at about 67% when I was flashing the firmware. How can I charge the battery for the heck of it when the phone is dead? Normally when you plug in the USB cable there's a charging animation on the screen. Nothing comes up at all, can a dead phone charge a battery, or does the software need to send the power to the battery?
Honestly I've had flashes fail at varying points during the flash and I've gotten the black screen before, ALWAYS I've been able to get it to work by following these steps:
Pull out everything, SIM, SD, Battery, USB, EVERYTHING
Close Odin (If it's open)
Reopen Odin
Insert battery, hold vol down (If this doesn't work hold both volume buttons NO POWER)
While holding the button(s) plug in USB
Don't touch the power at any point, if this fails and you want to try the other key combo, start the process over completely.
Zilch25 said:
Honestly I've had flashes fail at varying points during the flash and I've gotten the black screen before, ALWAYS I've been able to get it to work by following these steps:
Pull out everything, SIM, SD, Battery, USB, EVERYTHING
Close Odin (If it's open)
Reopen Odin
Insert battery, hold vol down (If this doesn't work hold both volume buttons NO POWER)
While holding the button(s) plug in USB
Don't touch the power at any point, if this fails and you want to try the other key combo, start the process over completely.
Click to expand...
Click to collapse
This man speaks the truth, listen to him.
If your insurance covers damage then destroy the phone and call att and tell them its been destroyed.
if not then it is possible that the power outage could have caused your phone to zap.
Flashing or not if you spilled stuff into the usb port your screwed. Week and a half and you scratched the screen and did that? I have tried to scratch mine with no succes. I say ditch that phone and get a GO phone. And have a mod delete this pointless thread already!!!!
Hey guys I think I actually did it. I was going to install the JPC Froyo Rom, and somehow booted into recovery in the ROM. Now whenever I turn the phone on it boots into recovery, and none of the button combinations work for putting it into Download mode so I can flash back to stock. On the i9000 thread it says that if you get into this situation you cannot flash back. Any of you guys run into this issue? If not then it looks like I'll be trying to convince an ATT rep to give me a new phone
Try powering off... Then hold vol up and down buttons then plug in usb.... That happened to me... Your not bricked
Sent from my SAMSUNG-SGH-I897 using XDA App
Connect to adb and run reboot command
Sent from my GT-I9000 using XDA App
Nope
Nope sorry guys I know all of what you just said. As for plugging in USB while holding volume buttons, it'll just go to that battery charging screen, and adb doesn't work because it doesn't boot past recovery. Sorry guys but yes it was bricked. It's okay though because I just went to ATT and since they can't identify the problem they just replaced the phone
Thought mine was bricked one night, too. Same scenario. Tried dropping the SIM and SD card out even though I didn't think it would make a difference, but it did. Got to download screen and reflashed with ODIN.
Good luck.
Sent from my SAMSUNG-SGH-I897 using XDA App
KCutrer1 said:
Nope sorry guys I know all of what you just said. As for plugging in USB while holding volume buttons, it'll just go to that battery charging screen, and adb doesn't work because it doesn't boot past recovery. Sorry guys but yes it was bricked. It's okay though because I just went to ATT and since they can't identify the problem they just replaced the phone
Click to expand...
Click to collapse
If you pull the battery, then put the battery in. hold both volume buttons buttons, and then plug the phone into the computer, it didn't boot to download?
Im curious if you even tried to use the Odin one click thread
There are 4 or 5 ways in that thread on how to get to download mode. And how exactly does this relate to development...just another curious thought. Well, you are getting a new phone, just hope that ATT or Samsung don't try to figure out the cause of your phone being "bricked".
AGAIN!
Okay after this I swear I won't be messing around with Froyo anymore. Here's the story: I got into download on the replacement captivate. Tried to install JPC froyo, but it never started flashing so I unplugged it from Odin and then tried to turn it back on. It goes to the normal "connect phone to computer" screen. However no attempts to get back into download mode have worked. Holding both volume buttons and power until second black screen doesn't work, booting while holding volume down doesn't work, holding both volume buttons and then inserting USB cable doesn't work. I think I'm stuck in this screen unless there's some incredible way I have yet to try. Anybody have any ideas? I would greatly appreciate feedback from the experienced users (Zilch25, designgears, kaik, reaver117), because I think I'd be pushing it trying to get it replaced a second time in such rapid succession
To flashman2002:
I put it in this section because it's in the development section that most flashing and such occurs so I thought there would be the greatest knowledge base. And yes I've pored over the one click thread and none of the methods mentioned there have any effect!
Jeez, I just scared the **** out of myself. I ran the remove lagfix script and it rebooted my phone but it was just a black screen. So I take the battery out. Bad Idea. It showed the ATT screen but just black after that. I could get it into recovery mode but not download. Then I messed some more and would only show a vague disconnected pic.
Finally I got it into download by doing this: (had odin open before hand)
1. took everything out including sim and usb cable.
2. quickly inserted battery and held volume buttons and very quickly inserted usb.
I'm pretty sure its the speed that matters because I tried about 4 times and only when I did it really fast did it work.
ThisWasATriumph said:
Jeez, I just scared the **** out of myself. I ran the remove lagfix script and it rebooted my phone but it was just a black screen. So I take the battery out. Bad Idea. It showed the ATT screen but just black after that. I could get it into recovery mode but not download. Then I messed some more and would only show a vague disconnected pic.
Finally I got it into download by doing this: (had odin open before hand)
1. took everything out including sim and usb cable.
2. quickly inserted battery and held volume buttons and very quickly inserted usb.
I'm pretty sure its the speed that matters because I tried about 4 times and only when I did it really fast did it work.
Click to expand...
Click to collapse
Nope. Unless you can do this with godly speed I dont think it'll work. I just got to the "Connect Phone to Computer" screen again.
You had the usb in before anything appeared on the screen right?
ThisWasATriumph said:
You had the usb in before anything appeared on the screen right?
Click to expand...
Click to collapse
Yeah originally. I can get to that screen now by just putting the battery in and holding power button. It seems to behave exactly like it normally would, just can't get out of it.
What screen? The screen you want has a big yellow triangle and says download.
ThisWasATriumph said:
What screen? The screen you want has a big yellow triangle and says download.
Click to expand...
Click to collapse
No it's on the phone...!...computer screen. That's what I'm saying, it's been stuck here for a while and none of the methods described on the one click thread work. I've been here before and just holding volume buttons and holding down power for it to boot twice and releasing would do it. Not so anymore. Can't get into download mode doing anything!
Well I read In the SRE thread I think that there are reports of newer phones not responding to any button combos. Bad batch they said not on purpose...
Also for the i9000 apparently you only have to hold the down volume key so since you flashed a i9000 rom try that if you haven't already.
You cant get into recovery right? Just holding volume and power then letting go of power after a bit?
Adb reboot download...
Sent from my SAMSUNG-SGH-I897 using XDA App
ThisWasATriumph said:
Well I read In the SRE thread I think that there are reports of newer phones not responding to any button combos. Bad batch they said not on purpose...
Also for the i9000 apparently you only have to hold the down volume key so since you flashed a i9000 rom try that if you haven't already.
You cant get into recovery right? Just holding volume and power then letting go of power after a bit?
Click to expand...
Click to collapse
Nope none of it works. I just got it replaced less then 3 hours ago and I already bricked it. I hope somebody finds out something that'll get this fixed. Maybe some way to force download mode through a computer application or something.
Well theres adb like mentioned above but im pretty sure that requires at least recovery mode working.
Like i said before i was stuck on the same screen so maybe theres still hope.
If all else fails someone will figure out how to JTAG these things eventually...
ThisWasATriumph said:
Jeez, I just scared the **** out of myself. I ran the remove lagfix script and it rebooted my phone but it was just a black screen. So I take the battery out. Bad Idea. It showed the ATT screen but just black after that. I could get it into recovery mode but not download. Then I messed some more and would only show a vague disconnected pic.
Finally I got it into download by doing this: (had odin open before hand)
1. took everything out including sim and usb cable.
2. quickly inserted battery and held volume buttons and very quickly inserted usb.
I'm pretty sure its the speed that matters because I tried about 4 times and only when I did it really fast did it work.
Click to expand...
Click to collapse
I know it doesn't help you out now, but when you remove the lag fix, just leave it set on the black screen. It's doing its thing. It will reboot when it's done. The home keys should still light up if you press them in this state...
Well thanks for your input anyway guys. Hopefully somebody figures something out. For now I guess I'll keep the SIM in my old iPhone 3G so I at least have a phone. Tomorrow I'll go to another ATT store in my area. Chances are the rep won't know what the hell that screen means and will replace the phone promptly.
Hi all,
I was flashing between Jf6 and JH7 today, wanted to see if flashing JH7 via different methods would give me a 3 button fix. (If it did fix it then flashing via Kies mini didn't do the job)
Ironically it backfired when Odin froze and I flipped out the battery
(Hey, I've been at the dl screen before when it was doing nothing and it survived!)
I plug the USB in, I get the exclamation screen
Do it with volume keys pressed, still get it
Hold down the volume + power and the screen goes blinking between exclamation and blank. I've tried releasing power keys at each point in those screens
I even took a video incase I'm not doing it right. Odin is running in the background. No USB plug-in 'pings' from Windows, as you can hear.
Anything I can do?
btw my bat build date is 8/13.. that bad week
I'm in Australia (bought phone off ebay) so sending it back to the States will be a bit of trouble.. I'm hoping I can work something out with the ebay seller otherwise I'll buy another cappy and hope someone finds the jtag points I guess.
same here. no button combo method that previous worked is working now. :/
OP, did you see this thread: http://forum.xda-developers.com/showthread.php?t=775911
not working for me, but maybe it'll help you ... ?
Tremere said:
Hi all,
I was flashing between Jf6 and JH7 today, wanted to see if flashing JH7 via different methods would give me a 3 button fix. (If it did fix it then flashing via Kies mini didn't do the job)
Ironically it backfired when Odin froze and I flipped out the battery
(Hey, I've been at the dl screen before when it was doing nothing and it survived!)
I plug the USB in, I get the exclamation screen
Do it with volume keys pressed, still get it
Hold down the volume + power and the screen goes blinking between exclamation and blank. I've tried releasing power keys at each point in those screens
I even took a video incase I'm not doing it right. Odin is running in the background. No USB plug-in 'pings' from Windows, as you can hear.
Anything I can do?
btw my bat build date is 8/13.. that bad week
I'm in Australia (bought phone off ebay) so sending it back to the States will be a bit of trouble.. I'm hoping I can work something out with the ebay seller otherwise I'll buy another cappy and hope someone finds the jtag points I guess.
Click to expand...
Click to collapse
You may also want to try removing and then reinstalling the Samsung USB drivers on your PC.
I've verified there is simply no USB device being registered no matter what OS, the phone is just sucking power.
@The_Bishop: Did see that, exactly the same as yours, plug usb in, get that screen
Anyone want to be awesome and send my Capppy back to Samsung on my behalf?
best method that never dies when i was in your situation......
unplug usb, turn phone off, then put battery in, turn odin on, now hold volume buttons ONLY then insert usb in phone, you will see download mode with odin identifying the port;
hope it worked ?!?!?!?
Believe me I have tried everything. There is simply was and still is no way to enter recovery or download mode on this phone. Its hardware locked!
a little off topic, but how do i find my phones "bat build date" ?
I had the exact same problem. If you do a battery pull.. hold down both volume buttons and plug the usb cable into the phone while it's hooked to PC then it bumps you into Download mode. I did the exact same thing you did and am running froyo at the moment.
Oh.. no power button.. just both volume buttons.
YoungGun821 said:
a little off topic, but how do i find my phones "bat build date" ?
Click to expand...
Click to collapse
Is on the underside of the battery, one facing into the slot.
i.e 2010.08.13
terrigan said:
I had the exact same problem. If you do a battery pull.. hold down both volume buttons and plug the usb cable into the phone while it's hooked to PC then it bumps you into Download mode. I did the exact same thing you did and am running froyo at the moment.
Oh.. no power button.. just both volume buttons.
Click to expand...
Click to collapse
Done that. Exactly what happens in video. Both volume buttons down, plug in usb.. no response, just brick screen.
I had the same problem.. the phone didn't register USB.. have you rebooted the computer? I believe i did that at one point.
terrigan said:
I had the same problem.. the phone didn't register USB.. have you rebooted the computer? I believe i did that at one point.
Click to expand...
Click to collapse
I did try once or twice. From another thread it was also said to disable driver verification on windows startup for x64 machines. which I also did.
Basically I want to hear from someone who:
a) has a captivate that could never enter dl/rescue via buttons, only adb
b) captivate didn't trigger a plug in 'ping' from Windows until they ??
FYI this is a Macbook Pro, and I booted into Win7 x64 Pro for flashing.
Hi I have the same problem..
What I did was this rooted with one click.. loaded Cognition 2.1.6 all was good..I saw the froyo so I thought lets try it. so opened up ODIN put it in recovery mode. with ADB could never get it in the button way.. it started to load and it froze. I didn't disable voodoo and IS THAT WHY I AM STUCK? I have tried every combo changed drivers computer will not see the phone.. is it a AT&T Phone
IS there anyway to fix it?? or can someone make a program to fix this? I would make a big donation if they did!!!
Thanks Forum!!
Yeah I had it in adb mode to enter download mode, maybe that is why it won't start back up.
I've now given the phone to a local mobile repair business, if riffbox or someone comes out with a Captivate rescue soon its probably as a end result of me
I sent mine back to Samsung as well. BTW, I have a battery from 2010.08.12 so I might be in the same boat. Wish I'd have used one of my OEMs to see if that made any difference, but I did not. :/
I have the same issue.
Rooted my phone through adb, which was fine. Couldn't get into recovery/download modes with hardware before then.
Now my phone is bricked, and not detected or even charging via USB.
wtf
If the repair shop cant fix it try this:
1.) Remove Battery, SIM Card and External SD
OR
2.) Press and HOLD VOL UP AND DOWN with USB inserted and THEN slap in the battery.
This worked for me, for some reason inserting the battery last did the trick.
Let me know if anyone finds a solution to this I have tried it all and my computer will not detect my phone. Has Samsung blocked this in there firmware?
Did you try what I posted above?
yep nothing if I could get it to detect in command prompt I could force it but it won't... the button thing didn't even work when the phone worked!
So ....
So a couple days ago, my power button and volume button and even the camera button stopped working. I thought I'd bricked my phone! But once I got home, I put the charger in and the screen came on. I've been using Sony's "double tap to wake" option to use the phone.
BUT THEN, god damn battery runs out completely, I charged it and now because the power button isn't working, I can't turn the phone on.
Tried adb reboot, tried holding volume buttons, tried hard reset button under USB and microsd flap, nothing. Screen comes on when it's charging, the phone works perfectly (apart from buttons ofc)
Flashtool recognises the device when I plug it in, but I don't see any option to reboot the device since it's connected with debugging off.
Code:
01/035/2015 22:35:37 - INFO - Device disconnected
01/035/2015 22:35:56 - INFO - Device connected with USB debugging off
01/035/2015 22:35:56 - INFO - For 2011 devices line, be sure you are not in MTP mode
I haven't dropped the phone, it can't be water damage either since I'm paranoid and keep it away from water even though it's waterproof.
Help? Don't know whether to take it to Sony because I unlocked my bootloader :crying:
i360* said:
So a couple days ago, my power button and volume button and even the camera button stopped working. I thought I'd bricked my phone! But once I got home, I put the charger in and the screen came on. I've been using Sony's "double tap to wake" option to use the phone.
BUT THEN, god damn battery runs out completely, I charged it and now because the power button isn't working, I can't turn the phone on.
Tried adb reboot, tried holding volume buttons, tried hard reset button under USB and microsd flap, nothing. Screen comes on when it's charging, the phone works perfectly (apart from buttons ofc)
Flashtool recognises the device when I plug it in, but I don't see any option to reboot the device since it's connected with debugging off.
Code:
01/035/2015 22:35:37 - INFO - Device disconnected
01/035/2015 22:35:56 - INFO - Device connected with USB debugging off
01/035/2015 22:35:56 - INFO - For 2011 devices line, be sure you are not in MTP mode
I haven't dropped the phone, it can't be water damage either since I'm paranoid and keep it away from water even though it's waterproof.
Help? Don't know whether to take it to Sony because I unlocked my bootloader :crying:
Click to expand...
Click to collapse
Are you able to reflash your phone's firmware?
degraaff said:
Are you able to reflash your phone's firmware?
Click to expand...
Click to collapse
I'd have to boot the phone into flashmode and that requires power button and volume button...
Try to turn on Ultra stamina Mode and then turn that same mode Off.
Phone will reboot, after the reboot tell me how are your buttons.
I had the same problem this morning, never had it before. Then i thought, 99.9% of phone's problems are software related and solve themselves by a reboot or factory reset (i sell chinese smartphones for living..) and tried to reboot the phone. Power button for 8-10 secs did nothing (as expected, as buttons not working). Finally, i remembered that ultra stamina mode asks to reboot the phone. Did it and Voilá! phone is cool now
I'm still worried, but lets hope it doesnt happen again.
fufax said:
Try to turn on Ultra stamina Mode and then turn that same mode Off.
Phone will reboot, after the reboot tell me how are your buttons.
I had the same problem this morning, never had it before. Then i thought, 99.9% of phone's problems are software related and solve themselves by a reboot or factory reset (i sell chinese smartphones for living..) and tried to reboot the phone. Power button for 8-10 secs did nothing (as expected, as buttons not working). Finally, i remembered that ultra stamina mode asks to reboot the phone. Did it and Voilá! phone is cool now
I'm still worried, but lets hope it doesnt happen again.
Click to expand...
Click to collapse
How can I turn on ultra stamina mode when my phone is switched off right now! I can't turn it on with power button
Hi!
Did you try this one??
adb shell input keyevent 26
Click to expand...
Click to collapse
But i am not sure can you run it with debug mode off, try!
Peter_31 said:
Hi!
Did you try this one??
But i am not sure can you run it with debug mode off, try!
Click to expand...
Click to collapse
error: device not found :'(
edit; holy ****, how the **** did that work.
HAVE MY BABIES
i360* said:
error: device not found :'(
edit; holy ****, how the **** did that work.
HAVE MY BABIES
Click to expand...
Click to collapse
I am glad to hear that.
It is adb command emulating power button .
Is power button and volume buttons working now?
Peter_31 said:
I am glad to hear that.
It is adb command emulating power button .
Is power button and volume buttons working now?
Click to expand...
Click to collapse
I knew about the command, but I don't understand how it worked without debugging?
No buttons are working, but I am surviving using an app as a substitute and the "double tap to wake" option
I think it can be some minimal adb envirtoment because USB debugging is present when Andorid is fully power up. But thats only my theory
I think your problem can be hardware related, so you should contact Sony/Your Operator for warranty repair. In my opinion unlocking bootloader does not void your warranty in this case , Sony only noticed about you may..so is worth to try .
Sony said:
Voiding the warranty
If you unlock the boot loader, you may void the warranty of your device and/or any warranty from your operator. See your device’s warranty statement for details. Additionally, due to the modified device software, Sony’s repair network will likely have to replace key components before it can properly test, repair and verify your device using our repair tools and software. Consequently, if Sony performs a warranty repair, Sony will likely charge you a significant service fee for the additional costs caused by your modification of the software.]
Click to expand...
Click to collapse
Peter_31 said:
I think it can be some minimal adb envirtoment because USB debugging is present when Andorid is fully power up. But thats only my theory
I think your problem can be hardware related, so you should contact Sony/Your Operator for warranty repair. In my opinion unlocking bootloader does not void your warranty in this case , Sony only noticed about you may..so is worth to try .
Click to expand...
Click to collapse
Yep I did spot that, but as a (broke) student I can't risk sending my phone for repair and then getting a big bill from Sony.
I will take it to a third-party repair shop in the near future.
I think they (Sony) should inform you before charging for repair and wait for agreement from your side. Call them and ask about it.
Best Regards.
i360* said:
error: device not found :'(
edit; holy ****, how the **** did that work.
HAVE MY BABIES
Click to expand...
Click to collapse
Hello I am having the same problem but I do not know how to enter this command so that it will turn on my phone. Could you please show me how? I have flash tool installed and it is telling me the same status as your phone. Thanks
i360* said:
Yep I did spot that, but as a (broke) student I can't risk sending my phone for repair and then getting a big bill from Sony.
I will take it to a third-party repair shop in the near future.
Click to expand...
Click to collapse
you didn't backup your TA I guess?
btw I confirm they will need your approval before proceed with the repair out of warranty and charge you the costs, so I would try taking it to sony then if they want too much money just ask it back (you may be asked to pay just the shipping costs if they are going to send the phone somewhere for checks)
i360* said:
error: device not found :'(
edit; holy ****, how the **** did that work.
HAVE MY BABIES
Click to expand...
Click to collapse
Hello, I have the same problem, But I don't know how to use the Flashtool, Could you please tell me the steps to do it .
I think this is hardware related issue, so you should be able to go back to Sony.
fufax said:
Try to turn on Ultra stamina Mode and then turn that same mode Off.
Phone will reboot, after the reboot tell me how are your buttons.
I had the same problem this morning, never had it before. Then i thought, 99.9% of phone's problems are software related and solve themselves by a reboot or factory reset (i sell chinese smartphones for living..) and tried to reboot the phone. Power button for 8-10 secs did nothing (as expected, as buttons not working). Finally, i remembered that ultra stamina mode asks to reboot the phone. Did it and Voilá! phone is cool now
I'm still worried, but lets hope it doesnt happen again.
Click to expand...
Click to collapse
Found this post when googling the problem, and since my phone hadn't died yet I was able to use this method. Worked perfectly! (for now...) Thanks!
I had exactly the same problem. Also phone wasn't charging in the magnetic dock.
A factory reset worked for me but I'm worried, once it happened...
How did it work?
i360* said:
error: device not found :'(
edit; holy ****, how the **** did that work.
HAVE MY BABIES
Click to expand...
Click to collapse
hi,
I am facing the same problem. I installed SDK and ran the command but I keep getting no device is found.
How did you get it to recognize the device?
Sir, you are a genius
Ok long story
I bricked my device (totally dead, no power no dl mode no led not nothing at all), i know what i did wrong, then after plenty of research I ended up tripping the area in motherboard to bring phone back to life and I was successful. I brought it back to life started over completely with a stock device like new, I rooted and loaded up some roms and all was ok. Then....
Someone I knew needed a new device but did not want it rooted as they knew nothing about root and wanted a stock device, so I TOT all the way back to stock and told them the device would run through all the updates up to Lollipop and it did, BUT the OTA to lollipop bricked the device
Yes with the phone stock and doing regular updates it bricked, they brought it to me and I was able to trip the capacitors again and was able to get into bulk mode and AGAIN was able to bring device back to life, so I sat there and one by one let the updates come in on a COMPLETELY STOCK DEVICE and ONCE AGAIN the freakin OTA bricked the device, so.....
I have not been able to get it back, I went through the same steps to get device back, and I have now done everything possible (I think) and cannot get it back.
I have tripped the IC capacitors and gotten the 9006 and 9008, when I get the 9006 and all the partitions pop up, I use the SRK tool and it works, but then when I go to reboot I used to get the LG logo bootloop and was able to turn off and go into download mode, but now download mode freezes on the little icon and download mode never opens up, so in turn I cant TOT or KDZ back to stock. I have tried the boarddiag, I have even tried the Ubuntu fix and nothing, my symptoms so far:
download mode frozen with the little icon but download mode does not show up, I sometimes get just a vibration on/off that never ends, I have also gotten a red LED & LG logo boot loop. I have literally lost 2 days trying to figure this out. My question is, is there anyone that will do this for me. I will pay to ship and return, Please anyone.
stay-down said:
Ok long story
I bricked my device (totally dead, no power no dl mode no led not nothing at all), i know what i did wrong, then after plenty of research I ended up tripping the area in motherboard to bring phone back to life and I was successful. I brought it back to life started over completely with a stock device like new, I rooted and loaded up some roms and all was ok. Then....
Click to expand...
Click to collapse
Hi,
Have you tried this ? -->http://forum.xda-developers.com/showthread.php?t=2582142
LMK if it helped you.
iubjaved said:
Hi,
Have you tried this ? -->http://forum.xda-developers.com/showthread.php?t=2582142
LMK if it helped you.
Click to expand...
Click to collapse
Yes I tried that and Ubuntu would never see my device. Upon entering the first command I would not get a return command identifying my device.
Can you do one more thing? Disassemble your battery, reassemble it , plug it in wall charger , charge it for some time and go to download mode, see if its working?
iubjaved said:
Can you do one more thing? Disassemble your battery, reassemble it , plug it in wall charger , charge it for some time and go to download mode, see if its working?
Click to expand...
Click to collapse
charged up.
This is where I am right now.....If I turn on the device i get LG screen then it turns off and LED flashes red one time, then it loops doing the same thing.
If I hold vol up and plug in it will show download mode about to start but then powers off and red LED and it boot loops again.
I noticed if I power off and hold power button, then it will vibrate on and off while im holding power button, weird.
If I open up device to trip ic in motherboard, the device does the weird vibration while plugged in as i am attempting to trip mb.
I can trip it though and get 9006 or 9008 with all the partitions popping up and i have used every single program on here to unbrick but after all those programs all i get is the damn LG screen and red LED boot loop. I am totally giving up.
.....
Then i have no idea what could fix your phone. I recommend you bring it to a repair shop.
iubjaved said:
Then i have no idea what could fix your phone. I recommend you bring it to a repair shop.
Click to expand...
Click to collapse
Yeeah I think I will just let it go, it gave me a good run and I will just hang on to it just to have another device in the drawer.
Thanks for the help
stay-down said:
Yeeah I think I will just let it go, it gave me a good run and I will just hang on to it just to have another device in the drawer.
Thanks for the help
Click to expand...
Click to collapse
Even though i had to replace my LCD recently, im still using this device as my daily driver though!
Np.