So I've decided that I would like to return my Nook since I have issues with it no matter the ROM. Does anyone know a thread that explains how to go back to stock?
P.s. Sorry if this is in the wrong section.
Sent from my BN NookHD+ using xda app-developers app
Ogre6473 said:
So I've decided that I would like to return my Nook since I have issues with it no matter the ROM. Does anyone know a thread that explains how to go back to stock?
P.s. Sorry if this is in the wrong section.
Sent from my BN NookHD+ using xda app-developers app
Click to expand...
Click to collapse
Go to my HD/HD+ CWM thread linked in my signature and look at item 6. Download and flash plain stock 2.1.0 and do a factory reset.
Sent from my Nook HD+ running CM10.1 on emmc.
Related
I installed CM 10.2 emmc only to find out the sixaxis won't connect over bluetooth anymore, the whole reason I wanted to root. So does the sixaxis work with a stock rooted rom 2.2.0? Also does USB host work with it?
kylewieder said:
I installed CM 10.2 emmc only to find out the sixaxis won't connect over bluetooth anymore, the whole reason I wanted to root. So does the sixaxis work with a stock rooted rom 2.2.0? Also does USB host work with it?
Click to expand...
Click to collapse
If you look in the accessories forum, there is a thread discussing that. And I don't think USB host works on stock, but search to find out for sure.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
If you look in the accessories forum, there is a thread discussing that. And I don't think USB host works on stock, but search to find out for sure.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
Thanks for the qucik response. I've been searching a lot but haven't found the answers to these questions yet. Sorry for making a new thread I will continue to seach
kylewieder said:
Thanks for the qucik response. I've been searching a lot but haven't found the answers to these questions yet. Sorry for making a new thread I will continue to seach
Click to expand...
Click to collapse
Did you find this one?
http://forum.xda-developers.com/showthread.php?t=2512839
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
Did you find this one?
http://forum.xda-developers.com/showthread.php?t=2512839
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
Correct me if I'm wrong, but isn't device spoofer just for installing and running apps on devices that the apps aren't intended to run on? I'm just trying to pair the ps3 controller with my nook HD. From all the reading I've done, google kind of broke Bluetooth with 4.2. My iPhone would pair with stock nook is so I was hoping maybe a rooted stock ROM (2.1.1) would restore Bluetooth even though I'll be stuck with nook os.
kylewieder said:
Correct me if I'm wrong, but isn't device spoofer just for installing and running apps on devices that the apps aren't intended to run on? I'm just trying to pair the ps3 controller with my nook HD. From all the reading I've done, google kind of broke Bluetooth with 4.2. My iPhone would pair with stock nook is so I was hoping maybe a rooted stock ROM (2.1.1) would restore Bluetooth even though I'll be stuck with nook os.
Click to expand...
Click to collapse
I was not pointing you there about the spoofer, if you read the whole thread, it talks about if the six-axis works and on which ROM. It even talks about running stock on SD as a solution. I know nothing about any of it.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
I was not pointing you there about the spoofer, if you read the whole thread, it talks about if the six-axis works and on which ROM. It even talks about running stock on SD as a solution. I know nothing about any of it.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
I must have missed it. Thanks for your help pointing me in the right direction
Ok. I installed CWM and rooted 2.1.1. Got the Sixaxis working but I can't open the cyanoboot menu. I've tried holding the power and "n" button and just the "n" button while booting but can't access the cyanoboot menu. I'm trying to install enable unknown sources but no matter what I do I can't access the boot menu. If it helps sometimes when I power back on I get the factory recovery asking if I want to restore to factory maybe indicating something wrong with the CWM install?
kylewieder said:
Ok. I installed CWM and rooted 2.1.1. Got the Sixaxis working but I can't open the cyanoboot menu. I've tried holding the power and "n" button and just the "n" button while booting but can't access the cyanoboot menu. I'm trying to install enable unknown sources but no matter what I do I can't access the boot menu. If it helps sometimes when I power back on I get the factory recovery asking if I want to restore to factory maybe indicating something wrong with the CWM install?
Click to expand...
Click to collapse
No, there is no cyanoboot menu with rooted 2.1.1. You have to boot using the bootable CWM SD that you used to flash the Universal Root zip.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
No, there is no cyanoboot menu with rooted 2.1.1. You have to boot using the bootable CWM SD that you used to flash the Universal Root zip.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
Tons of searching and I couldn't find that. Thanks for the help!
Hi guys, I hope you can help me. I installed CM11 to my Nook HD+ following the thread [EMMC CM11 install - updated 01/18] I am having some problems and wanted to go back to stock Nook 2.2.0. The problem is I don't know how, I am more lost than when I first started. If this has been asked before I apologize, I looked through the forum and didn't see a fix, or if I did I missed it. Thank you in advance for any help you can give me. I don't think I made a backup of the stock Nook 2.2.0 though.
The best way to get back to stock is to go to my HD/HD+ CWM thread linked in my signature and make a new bootable CWM SD per item 1a there and use that to flash the plain stock 2.2.0 zip from item 6. Follow that with a factory reset with CWM. That should make it completely stock.
Sent from my BN NookHD+ using XDA Premium HD app
Thank you so very much leapinlar, I am back on stock now. Think I will stick to CM10 for a bit, thanks again leapinlar for your help its very much appreciated. After reading your thread I understand the process a lot better now, I wont be going in blind like I was installing CM11. Thanks again mate.
The Lone Wolf said:
Thank you so very much leapinlar, I am back on stock now. Think I will stick to CM10 for a bit, thanks again leapinlar for your help its very much appreciated. After reading your thread I understand the process a lot better now, I wont be going in blind like I was installing CM11. Thanks again mate.
Click to expand...
Click to collapse
If you want to install CM10.1/CM10.2 go to the Dummies guide linked in my signature.
Sent from my BN NookHD+ using XDA Premium HD app
Once again leapinlar thank you. I followed your thread for CM10.2 for Dummies and now have CM10.2 on my Nook HD+ and everything is running smoothly The directions were simple and easy, thanks again mate for all your help and guidance.
My Nook HD will only boot to CWM recovery.
A bit of history...
Was happily running CWM 10.2 but decided to upgrade to CWM 11. I couldn't get this to work (status 7 installation aborted). I reinstalled 10.2 and this worked fine. I then stupidly followed some instructions for installing CWM 11 when I was tired and didn't spot they were for the Galaxy Tab 2 and since then my Nook HD just boots into CWM recovery.
I'm pretty sure I have killed my device (I gave up trying to fix it a couple of months ago) but before I throw it in the bin I thought someone on here may have some bright ideas for rescuing it.
Thanks in advance for any advice
Try going to my HD/HD+ CWM thread and flash a plain stock zip from item 6.
What thread and advice did you follow?
Sent from my SCH-i705 using XDA Premium HD app
leapinlar said:
Try going to my HD/HD+ CWM thread and flash a plain stock zip from item 6.
What thread and advice did you follow?
Sent from my SCH-i705 using XDA Premium HD app
Click to expand...
Click to collapse
I tried flashing a plain stock zip from item 6, it didn't change anything.
Thread was on the cyanogenmod forum. I don't appear to be able to post a link so this is the bit I stupidly followed...
Hello!
The "error 7" message was in my case coused by an old version of CWM.
There is already a topic about it under Samsung Galaxy Tab 2 10.1 p5110.
This is what you could try to do:
- download the newest version of CWM at this link : **link deleted as forum won't let me post links but it was CWM for a Galaxy Tab2 10.1**
- install this package and reboot
- note : this is not the touch version of CWM so you have to use the power and volume buttons to use this type of CWM
- download the newest CM 11 and put it on your EXTERNAL SD CARD
- download if you use it the newest GAPPS for KK to your EXTERNAL SD CARD
- go into recovery mode
- wipe cache
- wipe dalvik cache
- install CM 11
- install the GAPPS if you use it
- reboot
This solved my "error 7" problem and also for some others with this error.
Thanks for looking.
So what did you do? Install the CWM from that thread?
Sent from my SCH-i705 using XDA Premium HD app
leapinlar said:
So what did you do? Install the CWM from that thread?
Sent from my SCH-i705 using XDA Premium HD app
Click to expand...
Click to collapse
Yes, I did.
simondbarnes said:
Yes, I did.
Click to expand...
Click to collapse
Then you may have bricked it. Did it say it installed correctly?
The problem is the Galaxy Tab 2 uses a different partition for recovery than the Nook HD. Whoever made that zip must have failed to put a safety assert statement in it to prevent users from trying to flash it to the wrong device.
I will try to find the thread to see if the zip was bad and where it tried to install it on your nook. Do you have any more clues for me to the link?
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
Then you may have bricked it. Did it say it installed correctly?
The problem is the Galaxy Tab 2 uses a different partition for recovery than the Nook HD. Whoever made that zip must have failed to put a safety assert statement in it to prevent users from trying to flash it to the wrong device.
I will try to find the thread to see if the zip was bad and where it tried to install it on your nook. Do you have any more clues for me to the link?
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
I can't remember what happened when I installed it, sorry.
The thread is called Unable To Install Cm11 and it's in the Barnes & Noble Nook HD Stable/RC/M-Release section
On XDA? Type the link with extra spaces in it and I can find it.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
On XDA? Type the link with extra spaces in it and I can find it.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
No, not XDA.
forum cyanogenmod com / forum / 965-barnes-noble-nook-hd-stablercm-release/
simondbarnes said:
No, not XDA.
forum cyanogenmod com / forum / 965-barnes-noble-nook-hd-stablercm-release/
Click to expand...
Click to collapse
Ok, found the file you flashed and looked at it. It put the recovery image where your bootdata partition is supposed to be and wiped out bootdata. I made a bootdata repair zip and sent you a PM with the link. Try flashing that with your CWM. It may recover your bricked device. Let me know.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
Ok, found the file you flashed and looked at it. It put the recovery image where your bootdata partition is supposed to be and wiped out bootdata. I made a bootdata repair zip and sent you a PM with the link. Try flashing that with your CWM. It may recover your bricked device. Let me know.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
You're a genius, that has sorted it. Many, many thanks for your assistance
I've searched in the forum and couldn't find the answer to this question.
I've got cyanogenmod on the Nook HD+ - Can I run stock off an SD card so I can use apps like Sky Go ?
You just searched the wrong forum. It is in the development forum here:
http://forum.xda-developers.com/showthread.php?p=42724327
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
You just searched the wrong forum. It is in the development forum here:
http://forum.xda-developers.com/showthread.php?p=42724327
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
would you mind explaining the first few steps, not sure where to start. ( exp. level - installed cyanogenmod without any hassle)
RockinPlay said:
would you mind explaining the first few steps, not sure where to start. ( exp. level - installed cyanogenmod without any hassle)
Click to expand...
Click to collapse
You do it very much like you did when you put CM on internal, but use the files from that thread.
Use your CM to download the special stock ovation zip from his thread to your internal sdcard. Then download the special ovation image from his thread and burn it to the SD you are going to use. Boot to the new SD and CWM will come up and use that to flash the zip you downloaded to your internal sdcard. You may have to look in the 0 folder there for the zip. You should be able to follow his thread from there.
Sent from my BN NookHD+ using XDA Premium HD app
hey my nook seems to be bricked is there anyway to unbrick it ?
xLuke1999x said:
hey my nook seems to be bricked is there anyway to unbrick it ?
Click to expand...
Click to collapse
You need to tell us more than just saying bricked. Like which model, what were you doing when it "bricked", how is it acting now?
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
You need to tell us more than just saying bricked. Like which model, what were you doing when it "bricked", how is it acting now?
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
check your pms mate
xLuke1999x said:
check your pms mate
Click to expand...
Click to collapse
I don't help users via PM. Answer here.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
I don't help users via PM. Answer here.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
ok well its stuck in a boot loop and ive tried installing stock roms etc but it wont work and whenever i wipe data it dosent go
xLuke1999x said:
ok well its stuck in a boot loop and ive tried installing stock roms etc but it wont work and whenever i wipe data it dosent go
Click to expand...
Click to collapse
Getting info from you is like pulling teeth. What device are you running? What operating ROM were you running when it developed the boot loop? And describe the boot loop. What logos show and how far does it get when looping? How did you try to install the stock ROM? Did the install complete successfully? What do you mean it won't go when you wipe data? The data wipe does not complete or it completes but still boot loops?
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
Getting info from you is like pulling teeth. What device are you running? What operating ROM were you running when it developed the boot loop? And describe the boot loop. What logos show and how far does it get when looping? How did you try to install the stock ROM? Did the install complete successfully? What do you mean it won't go when you wipe data? The data wipe does not complete or it completes but still boot loops?
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
ok im running nook hd+ with 11-20140804-SNAPSHOT-M9 and it goes to the cyanogenmod screen then it loads abit then reboots. i got a sd card and put the 4gb boot img on their with 2.1.0 plain stock. when i do data whip it completes but doesnt remove the data so it still boot loops
xLuke1999x said:
ok im running nook hd+ with 11-20140804-SNAPSHOT-M9 and it goes to the cyanogenmod screen then it loads abit then reboots. i got a sd card and put the 4gb boot img on their with 2.1.0 plain stock. when i do data whip it completes but doesnt remove the data so it still boot loops
Click to expand...
Click to collapse
Thank you. But I'm afraid I have bad news for you. With some HD+ running CM11 it does truly brick. I suspect it has to do with CM11 running trim automatically on devices with the buggy emmc chip. And your symptoms match that (the device becomes essentially read only). I know of no known fix. You tried the ones I would recommend and it did not help.
Sorry
Edit: you can still use your device running a special version of CM on SD. Search the dev forum for noemmc. Verygreen made a ROM that will run on SD for bricked emmcs. I think succulent even made a CM11 version.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
Thank you. But I'm afraid I have bad news for you. With some HD+ running CM11 it does truly brick. I suspect it has to do with CM11 running trim automatically on devices with the buggy emmc chip. And your symptoms match that (the device becomes essentially read only). I know of no known fix. You tried the ones I would recommend and it did not help.
Sorry
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
so what can i do with my nook ?
xLuke1999x said:
so what can i do with my nook ?
Click to expand...
Click to collapse
See my edit above.
Sent from my BN NookHD+ using XDA Premium HD app
anyway to replace it through warranty?
xLuke1999x said:
anyway to replace it through warranty?
Click to expand...
Click to collapse
Not if it still shows the cyanoboot logo. B&N says that voids the warranty.
Sent from my SCH-i705 using XDA Premium HD app
anyway to get rid of that logo ?
xLuke1999x said:
anyway to get rid of that logo ?
Click to expand...
Click to collapse
Just by flashing the stock ROM back, which you can't do.
Sent from my SCH-i705 using XDA Premium HD app