Installed CM11 on HD+ Want Stock 2.2.0 Back - Nook HD, HD+ Q&A, Help & Troubleshooting

Hi guys, I hope you can help me. I installed CM11 to my Nook HD+ following the thread [EMMC CM11 install - updated 01/18] I am having some problems and wanted to go back to stock Nook 2.2.0. The problem is I don't know how, I am more lost than when I first started. If this has been asked before I apologize, I looked through the forum and didn't see a fix, or if I did I missed it. Thank you in advance for any help you can give me. I don't think I made a backup of the stock Nook 2.2.0 though.

The best way to get back to stock is to go to my HD/HD+ CWM thread linked in my signature and make a new bootable CWM SD per item 1a there and use that to flash the plain stock 2.2.0 zip from item 6. Follow that with a factory reset with CWM. That should make it completely stock.
Sent from my BN NookHD+ using XDA Premium HD app

Thank you so very much leapinlar, I am back on stock now. Think I will stick to CM10 for a bit, thanks again leapinlar for your help its very much appreciated. After reading your thread I understand the process a lot better now, I wont be going in blind like I was installing CM11. Thanks again mate.

The Lone Wolf said:
Thank you so very much leapinlar, I am back on stock now. Think I will stick to CM10 for a bit, thanks again leapinlar for your help its very much appreciated. After reading your thread I understand the process a lot better now, I wont be going in blind like I was installing CM11. Thanks again mate.
Click to expand...
Click to collapse
If you want to install CM10.1/CM10.2 go to the Dummies guide linked in my signature.
Sent from my BN NookHD+ using XDA Premium HD app

Once again leapinlar thank you. I followed your thread for CM10.2 for Dummies and now have CM10.2 on my Nook HD+ and everything is running smoothly The directions were simple and easy, thanks again mate for all your help and guidance.

Related

Reinstall stock ROM

So I've decided that I would like to return my Nook since I have issues with it no matter the ROM. Does anyone know a thread that explains how to go back to stock?
P.s. Sorry if this is in the wrong section.
Sent from my BN NookHD+ using xda app-developers app
Ogre6473 said:
So I've decided that I would like to return my Nook since I have issues with it no matter the ROM. Does anyone know a thread that explains how to go back to stock?
P.s. Sorry if this is in the wrong section.
Sent from my BN NookHD+ using xda app-developers app
Click to expand...
Click to collapse
Go to my HD/HD+ CWM thread linked in my signature and look at item 6. Download and flash plain stock 2.1.0 and do a factory reset.
Sent from my Nook HD+ running CM10.1 on emmc.

[Q] Revert back to Stock from Carbon

Hi there,
I have my Nook HD+, took it to a store to put in CM10.1 but instead they put in carbon-jb-unofficial-20131020-1819. It's lags to much. So I will like to get back to stock and try and put CM10.1 myself. How can I go back to stock?
Thanks...
fnanco said:
Hi there,
I have my Nook HD+, took it to a store to put in CM10.1 but instead they put in carbon-jb-unofficial-20131020-1819. It's lags to much. So I will like to get back to stock and try and put CM10.1 myself. How can I go back to stock?
Thanks...
Click to expand...
Click to collapse
You don't have to go back to stock to get CM10.1 on. Just follow the dummies guide for installing CM10.1. You can put it on directly over carbon.
Sent from my BN NookHD+ using XDA Premium HD app

[Q] Best way to go from CM 10.2 to CM 11 Nook HD

I see that CM 11 nightly is available for the Nook HD and was wondering what the best way would be to go with 11 from CM 10.2, also do I need to upgrade the Google Apps? I am sure I do, but where can I find it at?
I will be doing a backup in case I need to revert back to 10.2 for sure
Thanks for any help you can provide me in making the change.
Mark
snoozer854 said:
I see that CM 11 nightly is available for the Nook HD and was wondering what the best way would be to go with 11 from CM 10.2, also do I need to upgrade the Google Apps? I am sure I do, but where can I find it at?
I will be doing a backup in case I need to revert back to 10.2 for sure
Thanks for any help you can provide me in making the change.
Mark
Click to expand...
Click to collapse
You need to need to go to verygreen's CM11 thread for instructions. The old CWM versions will not work. Look in the dev forum.
Sent from my SCH-i705 using XDA Premium 4 mobile app
leapinlar said:
You need to need to go to verygreen's CM11 thread for instructions. The old CWM versions will not work. Look in the dev forum.
Sent from my SCH-i705 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
ok thanks

help please lost back up

hi,
i'm stuck with updating my nook hd+ to kitkat.
i seem to have lost the backup rom (i think i formatted the micro-sd that it was on by mistake).
i do not seem to be able to update to any rom as i get an error saying...
E: Can't open / external_sd/cm-11-20140606-nightly-ovation (1).zip
(bad)
installation aborted
it says this with all the roms i tried.
i did get the same problem with my S3 until i found the fusion rom, which worked ok.
ps i am on recovery v6.0.4.5
thanks in advance.
cookie1003 said:
hi,
i'm stuck with updating my nook hd+ to kitkat.
i seem to have lost the backup rom (i think i formatted the micro-sd that it was on by mistake).
i do not seem to be able to update to any rom as i get an error saying...
E: Can't open / external_sd/cm-11-20140606-nightly-ovation (1).zip
(bad)
installation aborted
it says this with all the roms i tried.
i did get the same problem with my S3 until i found the fusion rom, which worked ok.
ps i am on recovery v6.0.4.5
thanks in advance.
Click to expand...
Click to collapse
Try downloading the ROM zip directly to the nook rather than your PC. Sometimes the PC antivirus will corrupt the zip.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
Try downloading the ROM zip directly to the nook rather than your PC. Sometimes the PC antivirus will corrupt the zip.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
thanks but how do i do that when all i can do is get into recovery ?
thanks
ive gone through about 5 different roms & all have the same results.
cookie1003 said:
thanks but how do i do that when all i can do is get into recovery ?
thanks
ive gone through about 5 different roms & all have the same results.
Click to expand...
Click to collapse
You did not say earlier you could only boot to recovery. You need to go to my HD/HD+ CWM thread linked in my signature and make a new CWM bootable SD per item 1a and flash the plain stock ROM per item 6. That will get you back to like it came out of the box and you can start over.
Sent from my BN NookHD+ using XDA Premium HD app
Thanks you're a life saver.
Any idea why it won't take an roms ?
cookie1003 said:
Thanks you're a life saver.
Any idea why it won't take an roms ?
Click to expand...
Click to collapse
Bad downloads as I said earlier. And v6045 will only install CM11and nothing earlier.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
Bad downloads as I said earlier. And v6045 will only install CM11and nothing earlier.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
hi,
thanks for the help, can you tell me which of the files i need to unrar onto the active sd card.
it just says (the appropriate set of BOOTFILES).
Which im not sure which ones to use.
thanks again.
cookie1003 said:
hi,
thanks for the help, can you tell me which of the files i need to unrar onto the active sd card.
it just says (the appropriate set of BOOTFILES).
Which im not sure which ones to use.
thanks again.
Click to expand...
Click to collapse
The file that has the word BOOTFILES in the name and is for your device (HD or HD+).
Sent from my SCH-i705 using XDA Premium HD app
sorry my brain seems to be on a go slow.
leapinlar said:
The file that has the word BOOTFILES in the name and is for your device (HD or HD+).
Sent from my SCH-i705 using XDA Premium HD app
Click to expand...
Click to collapse
hi,
thanks, got back to standard so now to fook it up again
many thanks.
is it possible to go straight to 4.4.2 or even 4.4.3 from stock & which version of them all would you say is the most stable.
& wheres the best guide to do it.
thanks again.:good:

[Q] Newbe has a dumb question

I am sure this is answered a hundred times but I cant find one. What procedure do I use to make a kit kat rom that will dual boot on a Nook HD+. I dont want to root the emmc just be able to insert a SD and have a chioce of nook or KitKat.
Thanks
Yes you can do that. Go to verygreen's CM11 emmc thread and if you read through the first post you will see he has included a version that will run off SD. See here:
http://forum.xda-developers.com/showthread.php?t=2600572
Bokbokan also has a version here:
http://forum.xda-developers.com/showthread.php?t=2583952
Sent from my BN NookHD+ using XDA Premium HD app

Categories

Resources