Database Develop

Overclocking optimus black whit nova v8 corrected

Pardon by the one of before I do not speak English.
Hello to all.
My problem is the following one:
I yesterday made Overclock with terminal emulator and all correct one. I put that the Overclock remembered and here I made it bad, because I remained without battery and when arriving at to house I put it to load I ignited, it and nothing, I had left pillaged. I did recovery with wipes, I returned to install everything I tried and it again but no longer there was way to obtain it. With terminal emulator I have left myself pillaged when I have introduced the frequency and tlf does a reseteo to me but without going out. if I return it to try I must clear the battery because I have left myself colgadísimo. If I do with 0.5.6beta Nova app I pass the same to me has left myself pillaged at the end of doing overclock.
Somebody knows why happens this to me?
Will have been created some file that it must erase?
Some solution?
Thank you very much, I wait for your answers. A greeting.
Spanish
Hola a todos.
Mi problema es el siguiente:
Ayer hice Overclock con terminal emulator y todo correcto.
Puse que me recordase el Overclock y aquí la cagué, porque me quedé sin batería y al llegar a casa lo puse a cargar, lo encendí y nada, se me quedaba pillado.
Hice recovery con los wipes, volví a instalar todo y lo intenté de nuevo pero ya no había manera de conseguirlo.
Con terminal emulator se me queda pillado cuando he introducido la frecuencia y el tlf me hace un reseteo pero sin apagarse. si lo vuelvo a intentar tengo que quitar la batería porque se me queda colgadísimo.
Si lo hago con Nova app 0.5.6beta me pasa lo mismo se me queda pillado al final de hacer overclock.
¿Alguién sabe por qué me ocurre ésto?
¿Se habrá creado algún archivo que tenga que borrar?
¿Alguna solución?
Muchas gracias, espero vuestras respuestas.
Un saludo.

Excuse me, but your English language is less understandable for me...
Perhaps other 43 views of this thread doesn't understand either, so no reply yet..
CMIIW

It seems to be a translation, no ?
What's the original language ?
Because neither I understand your post.
Sent from my LG-P970 using xda premium

Sobralobo said:
It seems to be a translation, no ?
What's the original language ?
Because neither I understand your post.
Click to expand...
Click to collapse
I think it's translation. If you understand, perhaps you can give solution of those problem?

redy2006 said:
Excuse me, but your English language is less understandable for me...
Perhaps other 43 views of this thread doesn't understand either, so no reply yet..
CMIIW
Click to expand...
Click to collapse
or the text is corrected or that I create.

pelucaslee said:
or the text is corrected or that I create.
Click to expand...
Click to collapse
Well, it seems I (or someone who read this thread) still don't understand your 'edited' question... I am sorry...
What is your language? Perhaps you can also write it with your own language (add your original language below your question), so other's who had same language can understand and help.
CMIIW.

redy2006 said:
Well, it seems I (or someone who read this thread) still don't understand your 'edited' question... I am sorry...
What is your language? Perhaps you can also write it with your own language (add your original language below your question), so other's who had same language can understand and help.
CMIIW.
Click to expand...
Click to collapse
Ok, posted, thanks

from what I can make out of it, it's a portugese or spanish lang (he just posted it lol)...I think he's trying to say that he overclocked his phone making it unstable (if im not wrong) and he's saying it's like a brick now and wont turn on even with plugging it in and asking if he tinkered with the wrong file or somthing?

In order to repair a faulty overclock, you have to wipe /data only, and then reflash.
When you wipe all and then reflash everything... It continues failing?
---
Para solventar un problema de overclock fallido, basta con hace un wipe de /data y luego hacer un reflash. De todas formas, teniendo en cuenta que la Nova v8 solo la hay en versión wipe, no te queda otra que reflashear todo.
Cuando haces todos los wipes y reflasheas la nova 8... continua fallando el overclock? Detallame qué wipes haces, porque debería estar todo ok.
More text in spanish than in english? It's easier to me...

Huexxx said:
In order to repair a faulty overclock, you have to wipe /data only, and then reflash.
When you wipe all and then reflash everything... It continues failing?
---
Para solventar un problema de overclock fallido, basta con hace un wipe de /data y luego hacer un reflash. De todas formas, teniendo en cuenta que la Nova v8 solo la hay en versión wipe, no te queda otra que reflashear todo.
Cuando haces todos los wipes y reflasheas la nova 8... continua fallando el overclock? Detallame qué wipes haces, porque debería estar todo ok.
More text in spanish than in english? It's easier to me...
Click to expand...
Click to collapse
Yes, I think that he only made wipe, and not flashing.
you can try to make wipe and reflash again.

Huexxx said:
In order to repair a faulty overclock, you have to wipe /data only, and then reflash.
When you wipe all and then reflash everything... It continues failing?
hago el overclock con terminal y pongo 1,1 pero se cuelga
---
Para solventar un problema de overclock fallido, basta con hace un wipe de /data y luego hacer un reflash. De todas formas, teniendo en cuenta que la Nova v8 solo la hay en versión wipe, no te queda otra que reflashear todo.
Cuando haces todos los wipes y reflasheas la nova 8... continua fallando el overclock? Detallame qué wipes haces, porque debería estar todo ok.
More text in spanish than in english? It's easier to me...
Click to expand...
Click to collapse
Sent from my LG-P970 using XDA App

hago el overclock con terminal emulator. 1,1 hago los ajustes y se me cuelga.

pelucaslee said:
hago el overclock con terminal emulator. 1,1 hago los ajustes y se me cuelga.
Click to expand...
Click to collapse
Have you wiped all and reflashed?
¿Has hecho todos los wipes y reflasheado?

Hi, I work. seem silly but the keyboard has been changed and has come to first.
certainly never been clear to me what the phone reflash.
thank you very much everyone.
hug a friend.
Sent from my LG-P970 using XDA App

nada, se me queda pillado el teléfono, se reinicia sin apagarse del todo y ya no puedo hacer overclocking, se me cuelga.
Sent from my LG-P970 using XDA App

i do a full wipe and install nova 8 and aoverclock doesnt works, frezze phone or run very slow like 200 mhz :S, nova 8 have so many issues, i think rollback to stock from LG
hice full wipe e instale y nada, si overclockeo se cuelga o corre muy lento aparte de verle muchas fallas a nova q estoy a punto de irme a la stock mas estable

Only a comment: OVERCLOCK IS NOT MANDATORY
Enjoy your stock ROM overclock.

Huexxx said:
Only a comment: OVERCLOCK IS NOT MANDATORY
Enjoy your stock ROM overclock.
Click to expand...
Click to collapse
What's actually the purpose of overclock, perhaps those people doesn't know it (yet)...
CMIIW.

[GUIDE][p990H] Latinamerican Jellybean ROM'S Installation without problems.

PARA LA VERSION EN ESPAÑOL VE AL POST 2
YOU FOLLOW THIS GUIDE AT YOUR OWN RISK!!!!
This guide, has been made for the people that has problem's with the signal, battery and other problem's installing jellybean at Latinamerica.
Most common problem: no signal at all, battery life...
F.A.Q.
Q. Why i do not have signal at jellybean, pacman, miuiv4, paranoid...
A. i think the problem is the imei, that is lost, when you flash the new versions
Q. Why the imei is lost in jellybean, but not with Ginger or ICS.
A. i don't know but this sould help you with the problem
Click to expand...
Click to collapse
To fix the problem, you just have to follow this few steps to make it work
Files needed:
1. STOCK ROM, it can be Froyo, Gingerbread, or ICS, here is a rom you can use (it will work) DJANGO ICS STOCK ROM
2. Hyperterminal Descargar
3. AIOTKV5 Descargar
4. We need a baseband Ir al post (TIP: at
Venezuela, Movistar, i used version V30B)
We need to know our original imei, it's placed at the box, or in the phone, under the battery.
Ok, let's begin!
Firs Step. (Installing the Stock ROM, if you already are on Stock, go to step 2.)
We have to flash a Stock rom, in order to view flash the baseband and connect to Hyperterminal.
Assuming you are on the oldbl, we copy the IntSD-Mount-Fix.zip and our Stock ROM to SD ext, now we open the AIOTKV5 and press option 4, and follow the steps to flash the new unlocked bootloader and install a recovery.
Restart the phone and it will open the recovery, then flash the Stock ROM, in the aroma installer, install whatever you want, we just need the rom for flash a BB.
Step 2. Flashing BB
Now we have a Stock ROM, call *#06#and we will see our imei.
Open the AIOTKV5 and press option 7 and option B, follow the instructions to put your phone Download MODE
In the SmartFlash window we click on the ROM/Copy DLoption and, inCP bin we find the BB that we got from tonyp's thread we have to mark the checkbox ERASE CAL DATA. (BE SURE THE COM PORT HAS BEEN AUTOMATICALLY FILLED)
Now, we go to START, if an error show's at the end of the flash, just close that window, and click start again, do it until, it says disconnecting from phone, or something like that.
Now, we verify our actual imei *#06# and we will se that our imei has changed to something like this 38560000001 or some strange number, or no nomber.
Now call if youare on GB: 1809#*990# / if you are on ICS: 3845#*990#
It will show up a (Hidden Menu)
Click on port settings
Click on CP USB
Click OK (DO NOT MARK THE CHECKBOX)
Now we have to search the port, Equipo -> Administrar -> Port -> LG mobile USB serial Port (COM X) where the X is a number, (Remember that number)
Step 3. Installing the Hyperterminal
Intall it normally, like always.
Open the Hyperterminal, and click Cancel to any windows that shows (some windows requiere a confirmation to close a window)
Now in the main window (a white one), click anywhere, and click on "SPACEBAR KEY" and a new window will show up, to create a new connection, select there the port you just stored, (DO NOT SELECT THE LG..)
Click properties and select the right options like these:
1st checkbox: 115200
2nd checkbox: 8
3rd checkbox: Blank
4th checkbox: 1
5th checkbox: Blank
Click to expand...
Click to collapse
and press OK, and OK
If everything's fine, the main windows will show up a, Connected: 00:00:00, in the left bottom corner.
Now type "AT" without the quotes, and press enter,
You will see this.
OK
GREAT Now it's easy!
type " at%imei " without the quotes.
You will se a number like this: 38560000001 or other number.
Now type " at%imei=YourIMEI " without quotes, where "YourImei" is your imei, you stored at the begining.
Ejemplo: " at%imei=30265978462 "
And you are done, call *#06# and you can se your imei.
Now you just have to flash your ROM, like CyanogenMOD 10.1, PAC-man, Paranoid, etc...
Please feel free to comment
Thanks to:
spyrosk For making this amazing tool, AIOTK.
tonyp For making the complete baseband guide.
carburano For making the DjangoManoucheX Stock ROM used here.
x_justin to make the english guide,
dcseek who brought us the solution.

[GUIDE][p990H] Latinamerican Jellybeam Installation without problems.
FOR ENGLISH VERSION OF THE GUIDE, SEE POST 1
SIGUES ESTA GUIA BAJO TU PROPIO RIEZGO, NO ME HAGO RESPONSABLE POR DAÑOS O NADA ASI.
Esta guia esta pensada para todos aquellos, que tienen problemas (como yo) al instalar cualquier version mas alla de Gingerbread.
Problema mas comun: Sin señal.
F.A.Q.
Q. Porque no tengo señal en ninguna version.
A. El problema es que tu IMEI desaparece al instalarlo, aunque la BB y el RIL esten bien
Q. Problemas que causa.
A. Obviamente no tienes señal de ningun tipo (exepto por el WIFI), la bateria se consume muy rapido, ya que envia paquetes sin respuesta, y sigue intentando para obtener GSM.
Click to expand...
Click to collapse
Arreglando el problema. Solo debes seguir unos pocos pasos y asi lograr que te funcione.
Requerimientos:
1. ROM STOCK, puede ser Froyo, GB, o ICS. Aqui dejo el link para DjangoManoucheX DJANGO ICS STOCK ROM
2. Hyperterminal Descargar
3. AIOTKV5 Descargar
4. Necesitaremos la Baseband que nos guste Ir al post (TIP: en Venezuela, Movistar, me funciona la version V30B)
5. Sabernos el IMEI de nuestro telefono, en el telefono debajo de la pila, o en la caja.
Ok, comenzamos
Paso 1. (Instalando la ROM de Stock, si ya estas alli salta este paso.)
Tenemos que instalar la version STOCK de la rom, en DjangoManoucheX posee AROMA INSTALLER asi que sera facil instlarlo,
Asumiendo que estas utilizando el viejo bootloader, Copiamos IntSD-Mount-Fix.zip y nuestra rom DjangoManoucheX en nuestra SD externa, vamos al AIOTKV5 presionamos 4, y seguimos los pasos para montar nuestra particion con el nuevo bootloader liberado, e instalamos el recovery.
Reinicias normalmente, y entrara solo a Recovery, buscas e instalas normalmente, no importa que selecciones para instalar, solo queremos la rom para cambiar la BB.
Paso 2. Flasheando la BB
Ya que tenemos nuestra Rom de Stock, marcamos *#06# y veremos nuestra iMei cualquiera que sea el numero.
Abrimos el AIOTKV5 y presionamos la opcion 7 y seleccionamos la opcion B, y seguimos las instrucciones.
En la ventana de SmartFlash vamos a la opcion ROM/Copy DL y en CP bin buscamos la BB que descargamos. Seleccionamos la opcion ERASE CAL DATA. (Debes verificar que el campo PORT se rellene solo)
Y vamos a START, si aparece un error al final, solo cieralo, y dale START de nuevo, intenta hasta que diga, Desconectando.
Ahora, verificamos nuestra iMei marcando *#06# y veremos que nuestra iMei sera algo como esto 38560000001 o un numero extraño, o sin numero, da igual.
Ahora vamos a marcar, Si estas en GB: 1809#*990# / Si estas en ICS: 3845#*990#
Aparecera un Menu oculto (Hidden Menu)
Presionar en port settings
Presionar en CP USB
Presiona OK (NO SELECCIONES EL CHECKBOX QUE APARECE.)
Ya que hicimos eso, verficamos en nuestra pc, Equipo -> Administrar ->Puertos -> LG mobile USB serial Port (COM X) donde la X es un numero cualquiera, (RECUERDA EL NUMERO)
Paso 3. Instalando el Hyperterminal.
Luego de que lo descarguemos, aparecera el Wizard Setup. instalas todo normalmente, y abres el programa.
Presiona en cancelar a todo lo que aparezca, en algunos tienes que aceptar, el cancelar la ventana.
Ahora que quedo la ventana completamente blanca, haz click en cualquier parte y presiona la tecla "Espacio/Barra espaciadora" y una nueva ventana aprecera, diciendo Nueva Conexión, ahora seleccionamos el puerto que ya habiamos recordado, (NO ELIJAS EL QUE DICE LG)
y vamos a propiedades, y colocamos todo asi:
Primer recuadro: 115200
Segundo recuadro: 8
Tercer recuadro: Vacio / o Blank
Cuarto recuadro: 1
Quinto recuadro: Vacio / o Blank
Click to expand...
Click to collapse
Ahora presiona Ok, y Ok.
Y si haz hecho todo correctamente la ventana dira en la parte inferior izquierda, Connected: 00:00:00
Ahora escribe "AT" sin comillas, y presiona enter
veras algo como esto.
OK
Ahora escribimos " at%imei " sin comillas
veremos algo como esto: 38560000001 o un numero extraño.
Ahora escribimos esto " at%imei=TUIMEI " sin comillas, donde "TUIMEI" es obviamente tu numero de imei,
Ejemplo: " at%imei=30265978462 "
Y Listo! ya que hicimos todo, vamos de nuevo a nuestro movil, y marcamos *#06# y podremos ver nuestro imei.
Ahora simplemente, buscamos la ROM que nosotros querramos, como por ejemplo, CyanogenMOD 10.1, MIUIv4, o la que quieras
Y Puff el problema de la señal ya esta resuelto.
Thanks to:
spyrosk Por crear la maravillosa herramientar, AIOTK.
tonyp Por hacer la guia completa de las Baseband.
carburano Por hacer DjangoManoucheX Stock ROM que utilizamos.
x_justin Por hacer la guia en ingles.
dcseek Quien nos trajo la solucion.

Re: [GUIDE][p990H] Latinamerican Jellybeam Installation without problems.
Great friend......
But i could not understand anything.....would have been better if it was English first and the other language...
But will wait for the translation
Thanks mate
O2X with Magical ICS ROM and magnificent kernels from my buddies

Re: [GUIDE][p990H] Latinamerican Jellybeam Installation without problems.
Great help bro, still sounds complicated, a hug from Colombia and thanks
Sent from my SGH-I777 using xda app-developers app

Re: [GUIDE][p990H] Latinamerican Jellybeam Installation without problems.
Hermano, it's not difficult jus try and don't worry about bricking the phone because it's unbrickable. Cheers.
Enviado desde mi LG-P990 usando Tapatalk 2

Re: [GUIDE][p990H] Latinamerican Jellybeam Installation without problems.
Thanks... I didn't know there was a problem updating to jellybean on a p990h
Sent from my LG-P990 using xda app-developers app

It was what was missing!
many latin american users don't used cm10/cm10.1 only for imei missing!!
GOOD THREAD MAN! thanks!

Re: [GUIDE][p990H] Latinamerican Jellybeam Installation without problems.
Te mereces muchos thanks, buen post, saludos desde argentina
Sent from my LG-P990h using xda app-developers app

Re: [GUIDE][p990H] Latinamerican Jellybeam Installation without problems.
For install paranoid Android, Must i follow the same procedure?
Sent from my SGH-I777 using xda app-developers app

Re: [GUIDE][p990H] Latinamerican Jellybeam Installation without problems.
Thank you! Good job..
Sent from my LG-SU760 using xda app-developers app

Re: [GUIDE][p990H] Latinamerican Jellybeam Installation without problems.
Eduardo9309 said:
For install paranoid Android, Must i follow the same procedure?
Sent from my SGH-I777 using xda app-developers app
Click to expand...
Click to collapse
Yes if you install paranoid you will have no signal at all if you have the p990h
Enviado desde mi LG-P990 usando Tapatalk 2

Re: [GUIDE][p990H] Latinamerican Jellybeam Installation without problems.
you might want to change the title as all jellybam rom threads have been banned from xda
Sent from my LG-P990 using xda app-developers app

Re: [GUIDE][p990H] Latinamerican Jellybeam Installation without problems.
tonyp said:
you might want to change the title as all jellybam rom threads have been banned from xda
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
What the reason they had been ban?

Re: [GUIDE][p990H] Latinamerican Jellybeam Installation without problems.
tonyp said:
you might want to change the title as all jellybam rom threads have been banned from xda
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
Wow I didn't noticed that the tittle had been changed... I thought it was jellybean.
I will change the name.
orbital_71 said:
What the reason they had been ban?
Click to expand...
Click to collapse
I do really think it's because gio doesn't support his rom. But who knows.
Enviado desde mi LG-P990 usando Tapatalk 2

Alguien me podría confirmar que con esto se arregla el problema del porcentaje de batería que aparece como 999% y no aparece en la barra de notificaciones
Someone could confirm that this will fix the problem of battery percentage shown as 999% and does not appear in the notification bar
Thanks
Gracias amigos
Enviado desde mi LG-P990 usando Tapatalk 2

rapbyone said:
Alguien me podría confirmar que con esto se arregla el problema del porcentaje de batería que aparece como 999% y no aparece en la barra de notificaciones
Someone could confirm that this will fix the problem of battery percentage shown as 999% and does not appear in the notification bar
Thanks
Gracias amigos
Enviado desde mi LG-P990 usando Tapatalk 2
Click to expand...
Click to collapse
Yes
Sent from my SGH-I777 using xda app-developers app

Somebody can help me ?
I lost 3g on Telcel mexico, i have a p990h but when i select wcdma "3g" the signal is lost, i try with nvflash by homero, return to gb flash the baseband v30b and erase my imei and notingh :/

lolote said:
Somebody can help me ?
I lost 3g on Telcel mexico, i have a p990h but when i select wcdma "3g" the signal is lost, i try with nvflash by homero, return to gb flash the baseband v30b and erase my imei and notingh :/
Click to expand...
Click to collapse
Try choosing wcdma + gsm or something similar, not only wcdma
Sent from my SGH-I777 using xda app-developers app

Eduardo9309 said:
Try choosing wcdma + gsm or something similar, not only wcdma
Sent from my SGH-I777 using xda app-developers app
Click to expand...
Click to collapse
but when i chose Wcdma + gsm, i dont have 3g stuck on E (edge)

lolote said:
but when i chose Wcdma + gsm, i dont have 3g stuck on E (edge)
Click to expand...
Click to collapse
That is weird, do you have a p990h? In telcel mexico?
Sent from my SGH-I777 using xda app-developers app

[RESTORE] htc_vivid_att_RUU_3.26.502.56_R23_US ICS ph39img

Extracted from htc_vivid_att_RUU_3.26.502.56_R23_US, untouched and unmodified. Flashable from bootloader off sdcard. As usual, it will wipe everything. I don't think anyone has uploaded this before, so i'll leave this here.
PH39IMG.zip - 437.48 MB
Remember to check md5sum before flashing

npz said:
Extracted from htc_vivid_att_RUU_3.26.502.56_R23_US, untouched and unmodified. Flashable from bootloader off sdcard. As usual, it will wipe everything. I don't think anyone has uploaded this before, so i'll leave this here.
PH39IMG.zip - 437.48 MB
Remember to check md5sum before flashing
Click to expand...
Click to collapse
Many have... But the download links have all expired...
Thanks...
Also... Could you edit your thread title to make it easier to search...
Sent from my Vivid 4G using Tapatalk

duda
hola, quisiera saber si puedes ayudarme, mi vivid no reinicio luego de cambiar el estilo de letra con la app font installer. y mi duda es que si puedo flashear este archivo para resolver mi problema?
mi vivid esta desbloqueado y era root con ice cream ... gracias

ROM Resurrection Remix Android P GSI para Moto Z2 Play

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Resurrection Remix P
Hello team, I share the great work you have done to make the GSI Resurrection Remix already with some of the Fix collected in this forum with the rom havooc:
The installation method is quite simple like any GSI:
• Install Treeble recovery.
• Make Wipes
• Install RR Oreo Treeble
• install image RR Android P as system Image
• Install oreo kernel
• and restart normally
• Once the restart is complete, go back to the recovery and install GAAPS nano android 9 arm64
• After that if you like you can install Magisk and ready
What will not work in the first instance are:
• Rotation
• camera and flash light
• gestures on sensor
but do not worry here I'll leave you the fix
for rotation, copy the sensor folder that I leave here in the path of / system / etc and place the permissions 0755 for the folder and 0644 for the files inside the folder
For camera copy the file Lib_mot_app6_metadata.so in the path in / vendor / lib and place permissions 0644
Par manager in sensor sticks the usr folder that I leave you in the path / vendor keeping the permissions for 0755 folder and for the files contained in 0644
and ready restart and you will have to enjoy this wonderful rom
if you like you can install Gcam for better camera experience
A STRONG EMBRACING AND APPRECIATION TO THE DEVELOPERS WHO ACHIEVED TO DO THIS POSSIBLE

Wow. how is battery compare to oreo?

I've been using it for the past two days. I think the system still need some uptime for the new battery management really kicks in but I think that's already better than Oreo. Specially on standby

+1 better than oreo in standby. On august ppr1 I've got a great sot
Inviato dal mio Moto Z2 Play utilizzando Tapatalk

Now, I've installed, almost everything works. Good Job.
Bugs:
- Clock widgets are unavaiable
- how to disable fp gestures without unlocking?

Grande aporte amigo, llevo tiempo siguiendo tus post por G+, el único problema es que los moto mods no funcionan
crees que en alguna update funcione ?
-excelente duración de batería

For anyone running the gsi: download the Kernel adiutor app and check the battery tab. Anyone else getting a 4000 mAh battery reported?

Castro27 said:
For anyone running the gsi: download the Kernel adiutor app and check the battery tab. Anyone else getting a 4000 mAh battery reported?
Click to expand...
Click to collapse
+1 I get 1000 mAh battery

ujtsan said:
Grande aporte amigo, llevo tiempo siguiendo tus post por G+, el único problema es que los moto mods no funcionan
crees que en alguna update funcione ?
-excelente duración de batería
Click to expand...
Click to collapse
Gracias se hace lo que se puede..!! hasta el momento no he visto en algun GSI espero en algun update salga algo, en la havooc funcionan los gestos de shok shok de la lampara y la camara es el mismo procedimiento de RR pero con la imagen de havooc, si gustas te paso la IMG , es la que llevo actualmente en mi movil.

In the "install image RR Android P as system Image" link there are 3 files, which one should I get?
En el 4to paso, cual de los 3 archivos img tengo que bajar, o son los 3?

ramelco said:
In the "install image RR Android P as system Image" link there are 3 files, which one should I get?
En el 4to paso, cual de los 3 archivos img tengo que bajar, o son los 3?
Click to expand...
Click to collapse
Y en lo del kernel como lo hago por que después del restart regresa a modo boot loader

Gamboa13 said:
Y en lo del kernel como lo hago por que después del restart regresa a modo boot loader
Click to expand...
Click to collapse
Try this one system-190120-arm64-aonly-vanilla-nosu.img you'll boot to bootloader if you flash the wrong one.
twrp treble
oreo treble
system-190120-arm64-aonly-vanilla-nosu.img on system partition
boot-radium-fpkeys on boot partition

Please discuss in english.

After installing the system img, i restart but a decription error msg appear asking forma a password. Entering any word make it restarts and again, the same error. Any help please?

I installed everything perfect. THANK YOU

Dj_AlexBarrera said:
Instalé todo perfecto... pero las opengapps me estan dando problema... no sé porqué.
1. Primero de dió error 70 y lo solucione reparando el sistema de archivos.
2. Ahora me salió error 20 y no tengo idea que es eso...
Agradezco si alguien puede ayudarme. GRACIAS
Click to expand...
Click to collapse
Dice que tienes una room como de nougat,por la versión..
Yo la instale después de pasarlo a oreo y no tuve problema en la instalación,pero si esta lenta...
---------- Post added at 04:50 AM ---------- Previous post was at 04:46 AM ----------
juanepichio said:
Try this one system-190120-arm64-aonly-vanilla-nosu.img you'll boot to bootloader if you flash the wrong one.
twrp treble
oreo treble
system-190120-arm64-aonly-vanilla-nosu.img on system partition
boot-radium-fpkeys on boot partition
Click to expand...
Click to collapse
Bello,again..i installed without problem, but when run system ROM this slow..someone solution...

lsolis293 said:
Gracias se hace lo que se puede..!! hasta el momento no he visto en algun GSI espero en algun update salga algo, en la havooc funcionan los gestos de shok shok de la lampara y la camara es el mismo procedimiento de RR pero con la imagen de havooc, si gustas te paso la IMG , es la que llevo actualmente en mi movil.
Click to expand...
Click to collapse
Could you sharebus the IMG, please?

please write in english, xda has rules about this / por favor escriban en inglés, xda tiene reglas sobre esto.
just try to follow instructions as noted on first post. let me explain a bit how I did it:
1- flash treble recovery
2- make wipes, how to do this?
a. first, format data, then restart to recovery
b. second, wipe each partition except micro-sd (i'm assuming your files are there), then restart to recovery again
3- flash RR oreo treble
4- flash RR android P image on /system partition
5- flash oreo kernel image on /boot partition
6- restart, mandatory. you won't have navigation bar or fingerprint gestures, let the system boot.
7- after first boot, reboot to recovery and flash gapps nano android 9 arm64
8- enable navigation bar by going to settings > resurrection tools > navigation tab > navigation > enable navigation bar. if not present then you'll have to do it by build.prop or manage yourself to get fingerprint gestures working by copying usr folder. this can be done rooting and using a file manager or doing it all on twrp file manager.
to get root working: install MagiskManager-v6.1.0.apk (can be found on magisk forum), then reboot to recovery and flash Magisk-v18.0.zip
8- fingerprint gestures: extract usr.zip and copy usr folder to /vendor folder on root
9- camera: extract libs.zip and copy both files to /vendor/lib
10- rotation sensors: extract sensors.zip and copy sensor folder to /system/etc
make sure permissions for folders and files are set ok: 0755 on folders, 0644 on files
hey, give it some time. you will find yourself on doing trial/error to understand how to follow each step and make them work but I assure you it works.

ramelco said:
In the "install image RR Android P as system Image" link there are 3 files, which one should I get?
En el 4to paso, cual de los 3 archivos img tengo que bajar, o son los 3?
Click to expand...
Click to collapse
Our Moto z2 play is arm64 with A only

First flash rom, then reboot system. Then reebot recovery and flash gapps.
Dj_AlexBarrera said:
Instalé todo perfecto... pero las opengapps me estan dando problema... no sé porqué.
1. Primero de dió error 70 y lo solucione reparando el sistema de archivos.
2. Ahora me salió error 20 y no tengo idea que es eso...
Agradezco si alguien puede ayudarme. GRACIAS
Click to expand...
Click to collapse
Inviato dal mio Moto Z2 Play utilizzando Tapatalk

Why do I get a lot of random folders in TWRP when I want to install Magisk?

Hola, alguien me podria ayudar con mi problema, el 05 de noviembre de 2020 intente instalar magisk porque el magisk manager que tenia instalado perdia el acceso root al reiniciar el movil, y yo flasheaba el magisk .zip y no quedaba de manera permanente el root, y al quererlo flashear en el twrp (como siempre) en la memoria interna, no me aparece las carpetas de la memoria interna y solo me aparecen muchas carpetas al azar con nombres al azar ejemplo: (jfbjfkelw82ieh8ewiw92w) algo asi no me dejan instalar el .zip desde la memoria interna.
Translated to English:
Hello, could someone help me with my problem, on November 5, 2020 I tried to install magisk because the magisk manager that I had installed lost root access when restarting the mobile, and I flashed the magisk .zip and the root was not permanently left , and when I want to flash it in the twrp (as always) in the internal memory, the internal memory folders do not appear and I only see many random folders with random names example: (jfbjfkelw82ieh8ewiw92w) something like that does not let me install the .zip from internal memory.

What happens is that you do not have the storage decrypted

Mau_T5 said:
Hola, alguien me podria ayudar con mi problema, el 05 de noviembre de 2020 intente instalar magisk porque el magisk manager que tenia instalado perdia el acceso root al reiniciar el movil, y yo flasheaba el magisk .zip y no quedaba de manera permanente el root, y al quererlo flashear en el twrp (como siempre) en la memoria interna, no me aparece las carpetas de la memoria interna y solo me aparecen muchas carpetas al azar con nombres al azar ejemplo: (jfbjfkelw82ieh8ewiw92w) algo asi no me dejan instalar el .zip desde la memoria interna.
Translated to English:
Hello, could someone help me with my problem, on November 5, 2020 I tried to install magisk because the magisk manager that I had installed lost root access when restarting the mobile, and I flashed the magisk .zip and the root was not permanently left , and when I want to flash it in the twrp (as always) in the internal memory, the internal memory folders do not appear and I only see many random folders with random names example: (jfbjfkelw82ieh8ewiw92w) something like that does not let me install the .zip from internal memory.
Click to expand...
Click to collapse
Hello my friend. first you need to format data and then reboot recovery

saqopakey said:
Hello my friend. first you need to format data and then reboot recovery
Click to expand...
Click to collapse
Doesn't that ensue loss of data?
Enviado de meu POCO F1 usando o Tapatalk

[email protected] said:
Doesn't that ensue loss of data?
Enviado de meu POCO F1 usando o Tapatalk
Click to expand...
Click to collapse
yes but the problem can only be solved like this :/