Hi. I have been following this guide: http://forum.xda-developers.com/showthread.php?t=2392865
And im stuck at step 9. The install.bat stays in state "Step1 : Waiting for Device".
And im not sure how I passed the same flash recovery at step 3- I was stuck at the same step until, if i remember correcly, the script suddenly started copying files when the phone was already booted inside android.
How im trying to get it work:
The phone is disconnected from PC and turned off. I press VolumeUP and connect the phone to my PC.
Then the phone's led turns BLUE but nothing appears on the screen. And it stays in this state. The script doesnt recognise the phone and wont start copying. I tried connecting the phone with pressing VolumeDOWN- still no go. And I tried booting into the phone operating system and then connecting to PC- script still doesnt recognise.
what am i exacly doing wrong? thanks
heikis said:
Hi. I have been following this guide: http://forum.xda-developers.com/showthread.php?t=2392865
And im stuck at step 9. The install.bat stays in state "Step1 : Waiting for Device".
And im not sure how I passed the same flash recovery at step 3- I was stuck at the same step until, if i remember correcly, the script suddenly started copying files when the phone was already booted inside android.
How im trying to get it work:
The phone is disconnected from PC and turned off. I press VolumeUP and connect the phone to my PC.
Then the phone's led turns BLUE but nothing appears on the screen. And it stays in this state. The script doesnt recognise the phone and wont start copying. I tried connecting the phone with pressing VolumeDOWN- still no go. And I tried booting into the phone operating system and then connecting to PC- script still doesnt recognise.
what am i exacly doing wrong? thanks
Click to expand...
Click to collapse
my bad. had to switch to debugging mode and it went solid.
however i have not managed to get into recovery mode on my own. only after the script finishes and reboots- only then I am thrown to recovery mode. whats up with that? how can i boot into recovery myself? pressing the volumeup hasnt worked..
and another question. getting the phone back to stock condition (stock 4.2.2 ROM and stock recovery) I just need to flashtool the stock firmware on the phone?
sorry for dumb questions.
Related
Hi there i have rooted my phone with doomlord's latest rootkit for c6603 UK devices (you can tell im a noob), when installng and the opening he chainfire 3 app it asked me to install some graphics drivers and i did, it then restarted and then the loop restarted (turns off after sony logo, doesn't even get to xperia logo, then turns back on). I have tried several fastboot and flash methods but the problems still persists, does anyone know of any recovery or factory reset methods wihtout having access to your xz?
Thanks
1. Hold on boot volum up and power for 12 seconds i think.
Or
2. Charge the phone and see what's happening
Gesendet von meinem C6603 mit Tapatalk
charging it goes into a reboot loop then after a few times it displays battery meter...
ive tried flashing with flashtool but it comes up with "For flashtool, Unknown Sources and Debugging must be checked in phone settings", no idea how i gonna do that though, anyway to flash without this on? maybe fastboot?
avi312singh said:
ive tried flashing with flashtool but it comes up with "For flashtool, Unknown Sources and Debugging must be checked in phone settings", no idea how i gonna do that though, anyway to flash without this on? maybe fastboot?
Click to expand...
Click to collapse
I assumed you installed chainfire 3D app.
So, if you want to flash with flashtool, you must set your phone in flash mode.
Hold vol - when plugging the usb cable in (with phone powered off).
If you got the loop, plug the USB cable pressing vol - at the moment the phone is off.
And it may warn you about usb debugging, etc but just ignore it and continue anyway. Ive got back from bootloops with this regardless of unknown sources or debugging. Usually even when bootlooping the hard shutdown will work, hold power and volume up untill the phone vibrates three times and turns off. You may feel it vibrate once, ignore and keep holding.
You do need the correct adb drivers installed to use flashtool, the downloaf here at xda i believe includes them you just have to open the drivers folder, open the exe and choose your phone from the list. If you get into flashboot mode (when you hold volume up and plug it into the computer the led should flash once to let younknow its in the right state. Sometimes flashtool will take a long time to prepare the files for flashing amf your phone will start up... Let flashtool finish prepping, then it will come up with a screen telling you to put the phone in flashmode (usually giving the wrong instructions to do so, ignore them) if so, now go ahead and unplug your phone, power it down via the hard shutdown function i mentioned, then hold volume up and plug it back in. If you get the led flash its working, and if it wont then install its because your drivers arent installed properly.
Also i may be wrong, but the chainfire 3d drivers are for older versions of android, dont try to install them again. I did this on another phone that I had upgraded to jellybean and ot softbricked it. Jellybean runs ope GL fine on this phone.
Ive installed official frmware on my phone (through flashing) and now im about to root it again.
Thanks
avi312singh said:
Ive installed official frmware on my phone (through flashing) and now im about to root it again.
Thanks
Click to expand...
Click to collapse
I have kind of the same problem here, can you please tell me how you solved it?
Hey guys,
A while back I tried to root my Xperia T and putting CWM on it. Something went wrong and I don't exactly know what. It went into a boot loop.
Every time it starts up, the LED turns purple for a couple of seconds and it reboots again. I waited for the battery to drain and honestly forgot about it.
Now i found it again and i want to get it out of the boot loop. The wierd thing is that I can get into ClockWorkMod recovery but nothing else. When in startup and I push VOL- it goes into CWM without a problem. It's like the normal firmware is missing and it can only get into CWM. Is this possible?
And i am trying to flash the stock firmware on it. But when i try to connect with my pc (drivers an flashtool in place and working) it doesn't really seem to connect. It worked 1 time out of the last 5 tries. But when i tried to flash, it said ERROR. The phone get's the blue LED when i connect it. but this only workes if my timing is exactly right in the boot loop. I will try to manage it again to get some screenshots.
I'll update when i have screenshots and everything (with the proper ERROR code)
In the meantime, does anyone have any clue of what is going on?
Thanks:good:,
Flip
flipster112 said:
Hey guys,
A while back I tried to root my Xperia T and putting CWM on it. Something went wrong and I don't exactly know what. It went into a boot loop.
Every time it starts up, the LED turns purple for a couple of seconds and it reboots again. I waited for the battery to drain and honestly forgot about it.
Now i found it again and i want to get it out of the boot loop. The wierd thing is that I can get into ClockWorkMod recovery but nothing else. When in startup and I push VOL- it goes into CWM without a problem. It's like the normal firmware is missing and it can only get into CWM. Is this possible?
And i am trying to flash the stock firmware on it. But when i try to connect with my pc (drivers an flashtool in place and working) it doesn't really seem to connect. It worked 1 time out of the last 5 tries. But when i tried to flash, it said ERROR. The phone get's the blue LED when i connect it. but this only workes if my timing is exactly right in the boot loop. I will try to manage it again to get some screenshots.
I'll update when i have screenshots and everything (with the proper ERROR code)
In the meantime, does anyone have any clue of what is going on?
Thanks:good:,
Flip
Click to expand...
Click to collapse
Blue LED means you're in Fastboot mode, you need to put it into Flashmode (green LED) for it to work. If Vol Down puts it into Fastboot mode, then Vol Up would put it in Flashmode (I assume). Considering you're talking about timing, then it seems you don't know how to put it into Fastboot/Flash mode properly.
1.- Turn off your phone.
2.- Connect the USB cable to your computer
3.- Open Flashtool
4.- Press down the corresponding volume button (keep it pressed), and connect USB cable to your phone
Alternatively, you could also connect your sdcard to your computer and copy a flashable ROM to it, then flash it in recovery. It seems your /system partition/folder is either incomplete or damaged.
Antiga Prime said:
Blue LED means you're in Fastboot mode, you need to put it into Flashmode (green LED) for it to work. If Vol Down puts it into Fastboot mode, then Vol Up would put it in Flashmode (I assume). Considering you're talking about timing, then it seems you don't know how to put it into Fastboot/Flash mode properly.
1.- Turn off your phone.
2.- Connect the USB cable to your computer
3.- Open Flashtool
4.- Press down the corresponding volume button (keep it pressed), and connect USB cable to your phone
Alternatively, you could also connect your sdcard to your computer and copy a flashable ROM to it, then flash it in recovery. It seems your /system partition/folder is either incomplete or damaged.
Click to expand...
Click to collapse
Hey,
thanks for the reply.
The problem is that i can't turn the phone off. The only way it stays off is when the battery is dead. Like it is now. I have just tried what you said. VOL- gives the green LED for flashmode. But even when it is in flashmode and connected with my pc(pc also said it's connected) it keeps rebooting. So the connection switches on and of every 30 seconds or so. I found out that there was a wrong file in the flashtool firmware folder. after trying to flash the standard firmware it tried to do something else. I've removed the file and set it up right.
When it was connected (green light and everything) I got this;
"09/025/2014 17:25:27 - ERROR - (Bundle.java:440) - Cannot delete C:\Flashtool\.\firmwares\prepared\system.sin"
"09/025/2014 17:25:39 - ERROR - (Bundle.java:440) - Cannot delete C:\Flashtool\.\firmwares\prepared\system.sin"
And that was all. I will try again in a few minutes, but maybe I missed something.
[EDIT]
Tried a few more times. VOL- to flashmode, connected with pc. Flashtool starts loading the green bar.
After a couple of minutes it stops and Flashtool says this:
09/021/2014 18:21:11 - ERROR - (X10flash.java:523) - Read error :31 : Een apparaat dat op het systeem is aangesloten, werkt niet.
09/021/2014 18:21:11 - ERROR - (X10flash.java:524) - Error flashing. Aborted
(Een apparaat dat op het systeem is aangesloten, werkt niet. -> English -> The device that is connected to the system, doesn't work.)
And the thing that irritates me most of all is the X10flash.java:52.. part. Why does it say X10flash when a Xperia T lt30p is connected en i'm trying to flash LT30_9.2.A.1.205_CH or LT30p_9.2.A.0.295_Generic IT.
I can't wrap my head around it.
I put some attachments in here so you can see what I see. Can someone see what I'm doing wrong or not doing at all?
I seriously do not know how or why. But i did it. Flashtool did not give a log or anything(with previous phones i saw a long list.) it looked like it did not do anything. but the phone is booting into android as we speak!
Thanks for the help Antiga Prime! not a lot, but enough!:laugh:
Now i need to find out how to delete all thisXD
Take the battery out and in, then leave it connected to the charger for one full day, don't do anything with it.
Xperia T doesn't let you take out the battery that easy. But it's fixed. I just need to know how to delete this thread
Sent from my C6903 using XDA Free mobile app
Hi, I sorry to bother anyone, but I need help because my phone is not responding and I don't know what to do.
C6603, rooted, dual recovery installed, bootloader unlocked (I think)
So here's what happened. I very successfully installed the existenz ultimate rom on my phone. It was a wonderful rom and everything was going well. However, I accidentally dropped my phone and needed to send it for repair. Before sending it to the shop, I decided to do a factory reset using the option in recovery mode.
When I got the phone back from the repair shop, I wanted to install the same rom. What I did was download the rom installer and then install the zip file using the recovery mode. I went through the AROMA installer and everything, So I thought everything was going fine. When the phone rebooted, it showed the SONY logo, followed by a permanent black screen. The screen is on, it is just black.
I scoured the xda forums and I tried several things, to no avail:
I cannot enter recovery mode.
My PC cannot recognize my phone.
Flashtool cannot recognize the phone. My phone can't seem to enter flashmode, either.
I tried holding the power button and the vol. up button, and the phone does indeed restart (no vibrations), showing the SONY logo, and then I'm stuck with the black screen again.
I hope somebody can help me!
EDIT: I managed to somehow get flashmode working, so I think my phone is fine now! What a false alarm! In case this ever happens to anyone, what I did was to unplug the phone from any source of charging, then proceed to hold on the power button and vol. up button for REALLY long, I think almost 20 seconds. This managed to switch my phone off (it would keep restarting if I didn't hold in down long enough).
download stock firmware and open flashtool & ready to flash,dont connect until it say.connect your usb cable to ur phone,then reboot ur phone when display goes to black connect ur phone to pc whith pressing vol down ,then flash tool detect ur phone and it flash,sorry foe my bad english
edit: fixed it, just flashed a stock FTF, i'll dot the whole process again later on and hope this time it works out
You can close teh thread (i've tried to delete it but can't find the option)
I've just checked that I can boot my phone and recovery works. But for instance when i try to put service mode it gives an error with IMEI
edit: i've booted to the other recovery (using volume up) and installed the pre-rooted FW again. Shut down and tried again the flashmode process but still no luck, red and quick green light. After booting the phone, it seems to work basically, but wifi not working, it doesn't turn on.
What should the next step be?
The computer does not recognize the phone when my connect it to the USB port, not even charge. The only thing that happens is a flash of red light then green light. Same thing if phone is shut down when i connect the usb cable, red flash, then sony screen appears, then green light, and finally it vibrates two times before showing the level of battery, but without actually charging it.
Anf if i try a Vol Down+Power when in standby and connect with usb cable, it shows a quick red then green flash, and then nothing.
Ok i fixed that problem apparently the USB cable decided to stop working...
Now i have another problem as I decided to install the deodexed ROM and now my phone gets stuck at the sony screen and i can't even boot to recovery.
What i did to install:
Boot to recovery using Volume Up (PhilZ)
Prepare to install new rom (which formats Data, cache, etc)
Install ROM form SDcard1
Everything went fine but at the end it says "root lost or something" I put yes, then rebooted to system, and got stuck on sony screen....
What did i do wrong and how to fix it??
Thanks for the help!
I can't access twrp neither can I am able to give commands or go to bootloader anything I do just again starts the boot process it boots till I see honor logo and repeats the process again.. I an able to charge the phone...
aptop6 said:
I can't access twrp neither can I am able to give commands or go to bootloader anything I do just again starts the boot process it boots till I see honor logo and repeats the process again.. I an able to charge the phone...
Click to expand...
Click to collapse
Connect phone to pc with usb and then try to boot to bootloader(this has always worked for me when I have had that kind of issue). What were you trying to do when this started?
keikari said:
Connect phone to pc with usb and then try to boot to bootloader(this has always worked for me when I have had that kind of issue). What were you trying to do when this started?
Click to expand...
Click to collapse
yeah i tried the thing but still no response , the phone keeps on booting with honor logo,neither the pc can detect any device. I was trying to install twrp recovery and this happend, any help?
lost_gamer9 said:
yeah i tried the thing but still no response , the phone keeps on booting with honor logo,neither the pc can detect any device. I was trying to install twrp recovery and this happend, any help?
Click to expand...
Click to collapse
There's a change that you installed wrong TWRP and it keeps trying to boot recovery until it does it successfully. Though can't be sure since Honor 4x doesn't give any additional info. I can't remember how to fix it, but you could try to do force update, without update file.
Make sure you don't have 'dload' folder in root of your SDcard and that your device has high battery. Then hold vol + and vol - while powering device and keep holding them until it gets to update screen or until it boot loops again. If it gets to update screen your device should boot next time normally.