stock kernel i9305 - Galaxy S III I9305 (4G LTE + 2GB RAM) Q&A, Help &

Hi, i have a doubt... Can i extract the files from stock rom (s3 i9305) downloaded from samobile. Files in format *.tar.md5 with program 7zip, for example, and add(compress) the file extracted boot.img (kernel) to a file *.tar, for flash with odin? sorry the english. Thanks

Yes!
DiegoTriches said:
Hi, i have a doubt... Can i extract the files from stock rom (s3 i9305) downloaded from samobile. Files in format *.tar.md5 with program 7zip, for example, and add(compress) the file extracted boot.img (kernel) to a file *.tar, for flash with odin? sorry the english. Thanks
Click to expand...
Click to collapse
Yes, this is possible. You can also do it with Odin Mobile.
But you're stock kernel should be the same Android Version as new rom.
For exemple : extract 4.1.1 stock boot.img and inject in inside MIUI rom.

Related

how to upgrade cooked rom .rar?

All the cooked roms end with .rar. After I downlod the cooked rom (bepe) the file ends with rar. According to the trinity giude it should have ended with zip so that I would be able to extract the files (see section 4, upgrade rom - Open the folder where you unzipped the files and click on ‘ROMUpdateUtility.exe’). However, there is no exe file but only rar. How do I upgrade then? I m a beginner in this and I need your help!!!!!
Download WinRAR and extract the Files.
RAR is like ZIP only other compression
thanks a lot!

[Q] How-to convert Kies ROM to Odin package

Hello everyone,
I have a ZIP file downloaded using Kies and saved with Kies Patcher.
How can I create a ODIN package?
Link: Hotfile - JP5_JP4_JPP_TIM.zip
99 views & no reply? LOL.
@OP, Extract the contents using a unzipper like winrar or 7zip. tell me the contents.
Also tell me where you downloaded it from.
Curious aswel!!!
ragin said:
@OP, Extract the contents using a unzipper like winrar or 7zip. tell me the contents.
Also tell me where you downloaded it from.
Click to expand...
Click to collapse
Here's the content. I downloaded it from Kies. It's the official package of Froyo for italian branded TIM smartphones
Thank you!
Did you find a tar file in the zip? Use that
Sent from my GT-I9000 using XDA App
Its the file allready ready for Odin?? just put the file in PDA section and flash. Ihave seen many files that is just .zip files and u dont exract the .zip file because its ready for ODIN for flash
if you take a look at this official thread and the roms all of them I downloaded are just .zip file and ready to flash....please correct if im wrong.
http://forum.xda-developers.com/showthread.php?t=846913
The extracted files from zip u can use to flash in a iMac/macbook and heimdall app.

[Q] Extracting one package file

I´ve read about extracting one package file and I noticed that when we extract that, it won´t generate the file BOOT.tar.md5
What is this file? Is the kernel?
I wouldn´t have problem if I installed a rom stock without this file, correct?
Thanks...sorry my bad english.
If someone want to know. After search, i found the file BOOT.img.tar is the kernel!

[Q] How to extract stock firmware to flashable zip?

Hi guys, I want to extract a flashable zip from stock firmware of XT1060... I followed the instruction from this post :http://forum.xda-developers.com/showthread.php?t=2387941
but I get nothing in the system folder after I extracted it, and the kitchen gave me an error
Code:
Error: No /system/framework folder found!
So I want to ask how to extract a full flashable zip from the stock rom downloaded from sbf-droid (e.g.: VZW_XT1060_4.4.4-KXA21.12-L1.26_CFC_1FF.xml.zip)
Thank You
.....

Extracting boot.img from stock firmware

I have the stock firmware for my device (a Galaxy J6). I've downloaded it from sammobile, and it's in a zip file. Supposedly, all I need to do is extract this file with an extraction program like winrar and presto, I should have the necessary boot.img. But all I get are these useless .md5 files. What is going on? Did I misinterpret something?
More than anything, I would just like it if someone finally just explained to me what the hell I'm supposed to do. The Magisk installation guide doesn't even go into detail about how to get a boot.img, it just assumes you have it. It's infuriating.
AndreM962 said:
I have the stock firmware for my device (a Galaxy J6). I've downloaded it from sammobile, and it's in a zip file. Supposedly, all I need to do is extract this file with an extraction program like winrar and presto, I should have the necessary boot.img. But all I get are these useless .md5 files. What is going on? Did I misinterpret something?
More than anything, I would just like it if someone finally just explained to me what the hell I'm supposed to do. The Magisk installation guide doesn't even go into detail about how to get a boot.img, it just assumes you have it. It's infuriating.
Click to expand...
Click to collapse
If it's an OTA full upgrade there should be a file named payload.bin.
You need to unpack it to get the img files. Do it using this tool:
https://androidfilehost.com/?fid=818070582850510260
Enviado desde mi ONEPLUS A6013 mediante Tapatalk
Um, when I tried downloading your program, the page said there were no mirrors found.
Also, there doesn't appear to be any payload.bin file on the zip, just md5 files. And it's been that way for every j6 firmware I've downloaded in the past.
Maybe you should try downloading the firmware from sammobile and seeing whether you can extract boot.img from it?
AndreM962 said:
Um, when I tried downloading your program, the page said there were no mirrors found.
Also, there doesn't appear to be any payload.bin file on the zip, just md5 files. And it's been that way for every j6 firmware I've downloaded in the past.
Maybe you should try downloading the firmware from sammobile and seeing whether you can extract boot.img from it?
Click to expand...
Click to collapse
Give me the link and i will see what can i do.
Enviado desde mi ONEPLUS A6013 mediante Tapatalk
https://www.sammobile.com/firmwares/galaxy-j6/SM-J600GT/ZTO/download/J600GTVJU3ASA1/257858/
You might need to make a sammobile account if you don't have one already. Good luck!
AndreM962 said:
https://www.sammobile.com/firmwares/galaxy-j6/SM-J600GT/ZTO/download/J600GTVJU3ASA1/257858/
You might need to make a sammobile account if you don't have one already. Good luck!
Click to expand...
Click to collapse
I downloaded a random J6 firmware in another site.
You have to use 7zip software, it's free, much better than WinRar and supports tons of compression formats. Do these steps with 7zip:
-Unpack zip file.
-Rename the "*.tar.md5" to "*.tar".
-Open the ".tar" file and unpack "boot.img.lz4".
-Unpack "boot.img.lz4" file.
-It's done, you now have the "boot.img" file you were looking for
Enviado desde mi ONEPLUS A6013 mediante Tapatalk
Sorry for the late reply. I did it. I found the boot.img file! I'll be using it shortly.
Thank you so much. Your advice was absolutely invaluable!
How can I get boot.IMG from my firmware
My device is mafe air and I download Its firmware from a website but I am unable to get boot.img file from it because it have recovery.img and other system file where can I found my device supported boot.img in my device firmware. Please help me I need it to root my device using magisk. Please reply
My device is itel A14 max running on Mediatek chip and I downloaded it's firmware to root using magisk but when extract the zip file using 7zipper, I can't find the boot.img file. The file that I get is in .pac format and I am failing to extract it further to get boot.img file. Is there any way I can be helped please?
I have oppo f15 phone and i downloaded its stok rom after extract it ,8 can't find boot.img file how to do it plz help..
hank81 said:
I downloaded a random J6 firmware in another site.
You have to use 7zip software, it's free, much better than WinRar and supports tons of compression formats. Do these steps with 7zip:
-Unpack zip file.
-Rename the "*.tar.md5" to "*.tar".
-Open the ".tar" file and unpack "boot.img.lz4".
-Unpack "boot.img.lz4" file.
-It's done, you now have the "boot.img" file you were looking for
and the last step there is unpack or extract the boot.img from the boot.img.lz4 file cause i just did it
Click to expand...
Click to collapse
Please tell me how to extract latest firmware of oppo f15 cph2001ex_11_C.47 which is in ozip format please help me
hank81 said:
I downloaded a random J6 firmware in another site.
You have to use 7zip software, it's free, much better than WinRar and supports tons of compression formats. Do these steps with 7zip:
-Unpack zip file.
-Rename the "*.tar.md5" to "*.tar".
-Open the ".tar" file and unpack "boot.img.lz4".
-Unpack "boot.img.lz4" file.
-It's done, you now have the "boot.img" file you were looking for
Enviado desde mi ONEPLUS A6013 mediante Tapatalk
Click to expand...
Click to collapse
For me, on my note 10 lite I have a problem with 7zip when i try to open the boot.img.lz4 it says that I dont have an app Installed to perform that action
hank81 said:
I downloaded a random J6 firmware in another site.
You have to use 7zip software, it's free, much better than WinRar and supports tons of compression formats. Do these steps with 7zip:
-Unpack zip file.
-Rename the "*.tar.md5" to "*.tar".
-Open the ".tar" file and unpack "boot.img.lz4".
-Unpack "boot.img.lz4" file.
-It's done, you now have the "boot.img" file you were looking for
Enviado desde mi ONEPLUS A6013 mediante Tapatalk
Click to expand...
Click to collapse
My Friend
I have same problem above: find boot.img of my device ( SM-G532MT).
I have a firmware downloaded from firmware.mobi. Works fine.
But, when decompressed, shows only the archives for instalation for Odin ( CSC, AP, etc... ). No boot.img under other format.
hank81 said:
I downloaded a random J6 firmware in another site.
You have to use 7zip software, it's free, much better than WinRar and supports tons of compression formats. Do these steps with 7zip:
-Unpack zip file.
-Rename the "*.tar.md5" to "*.tar".
-Open the ".tar" file and unpack "boot.img.lz4".
-Unpack "boot.img.lz4" file.
-It's done, you now have the "boot.img" file you were looking for
Enviado desde mi ONEPLUS A6013 mediante Tapatalk
Click to expand...
Click to collapse
Cloviscard said:
My Friend
I have same problem above: find boot.img of my device ( SM-G532MT).
I have a firmware downloaded from firmware.mobi. Works fine.
But, when decompressed, shows only the archives for instalation for Odin ( CSC, AP, etc... ). No boot.img under other format.
Click to expand...
Click to collapse
read this https://android.stackexchange.com/a/179248
and this https://forum.xda-developers.com/t/extracting-boot-img-from-stock-firmware.3909612/#post-79106875
I read carefully and...
Forgive me, but the article DON'T answer my question: How to extract the boot.img from a stockrom in .img format...
Cloviscard said:
I read carefully and...
Forgive me, but the article DON'T answer my question: How to extract the boot.img from a stockrom in .img format...
Click to expand...
Click to collapse
forgive me about that too
Samsung devices by default don't have .img ...
usually stockrom come as .zip then you need to extract it (use 7zip since winrar is not capable of extracting .lz4)
-Rename the "AP_xxx.tar.md5" to "AP_xxx.tar". <~ any similar file with AP from the start
-Open the "AP_xxx..tar" file and if you see boot.img extract "AP_xxx..tar" then grab boot.img it's done, you now have the "boot.img" file you were looking for
-some device have "boot.img.lz4" file. <~ use 7zip again to extract .lz4 file then grab boot.img it's done, you now have the "boot.img" file you were looking for
also it is stupid to grab your boot.img when you are Samsung since Odin only accept .md5 format (does Samsung have access to fastboot or they are stuck using Odin idk never has Samsung phone lmao)
also i forgot to say that you can actually patch "AP_xxx.tar" via Magisk itself so less work
For anyone else having trouble getting the boot.img, but on a custom recovery:
1. Go to recovery
2. Open recovery terminal
3. Enter:
Code:
dd if=/dev/block/bootdevice/by-name/boot of=/sdcard/boot.img
4. Press enter to confirm the command
5. Reboot to system
The boot.img is now on your SD card.
<deleted>
discovered id posted a duplicate link
Immortal68 said:
For anyone else having trouble getting the boot.img, but on a custom recovery:
1. Go to recovery
2. Open recovery terminal
3. Enter:
Code:
dd if=/dev/block/bootdevice/by-name/boot of=/sdcard/boot.img
4. Press enter to confirm the command
5. Reboot to system
The boot.img is now on your SD card.
Click to expand...
Click to collapse
Thank you very much for rally... very helpfull...
But still 1 question: if the referred boot.img was previously patched with another root aplication like suroot???

Categories

Resources