System Status randomly showing Custom after Triangle Away - Galaxy S III I9305 (4G LTE + 2GB RAM) Q&A, Help &

I used custom rom before and then wanted to reset flash counter using Triangle Away. I installed stock rom, used custom kernel, then triangle away and then flashed stock rom again.
All went fine and flash counter is showing "NO" and firmware is Samsung Official but sometimes randomly System Status in download mode and in Android settings shows Custom. Then if i reboot it shows Normal. Why is this happening and what should I do to make it always show Normal?

supermies123 said:
I used custom rom before and then wanted to reset flash counter using Triangle Away. I installed stock rom, used custom kernel, then triangle away and then flashed stock rom again.
All went fine and flash counter is showing "NO" and firmware is Samsung Official but sometimes randomly System Status in download mode and in Android settings shows Custom. Then if i reboot it shows Normal. Why is this happening and what should I do to make it always show Normal?
Click to expand...
Click to collapse
Read basic faqs and guides stickied in General section .
jje

supermies123 said:
I used custom rom before and then wanted to reset flash counter using Triangle Away. I installed stock rom, used custom kernel, then triangle away and then flashed stock rom again.
All went fine and flash counter is showing "NO" and firmware is Samsung Official but sometimes randomly System Status in download mode and in Android settings shows Custom. Then if i reboot it shows Normal. Why is this happening and what should I do to make it always show Normal?
Click to expand...
Click to collapse
Do you have both Stock Kernel, Recovery and stock System, with no root?

Lo-P said:
Do you have both Stock Kernel, Recovery and stock System, with no root?
Click to expand...
Click to collapse
Yes, everything is Stock and no root. I downloaded stock firmware from Sammobile and used Odin to flash it.

supermies123 said:
Yes, everything is Stock and no root. I downloaded stock firmware from Sammobile and used Odin to flash it.
Click to expand...
Click to collapse
Try to root your phone, download another firmware, and flash it with Mobile Odin Pro.
Triangle Away is include inside Mobile Odin flashing, should solve your problem even if didn't work when you did it.

FACTORY RESET settings/backup and reset/Factory data reset will work, no need to flash or root. keep in mind this will wipe your internal storage and you will need to download and reinstall all of your applications

ashraf sharif said:
FACTORY RESET settings/backup and reset/Factory data reset will work, no need to flash or root. keep in mind this will wipe your internal storage and you will need to download and reinstall all of your applications
Click to expand...
Click to collapse
I tried Factory Reset but it still sometimes shows System Status: Custom and reboot usually changes it to Normal.
It seems someone else has had a similar problem with i9300: http://forum.xda-developers.com/showthread.php?t=1986907
Do you think this is Android related problem or is there somekind of fix out there?

Okay have you tried to use Kies? That is the official way to update your phone. Either Kies or ota. Try this. Use kies upgrade and initialization. If it says your ROM is not supported restart kies and put your phone in download mode before connecting it to PC. Enter serial no and model number into kies.then while phone is in download mode . connect it to PC. This should begin the upgrade process. After it finishes, factory reset phone. Let me know if that doesn't work
Sent from my GT-I9300 using xda premium

ashraf sharif said:
Okay have you tried to use Kies? That is the official way to update your phone. Either Kies or ota. Try this. Use kies upgrade and initialization. If it says your ROM is not supported restart kies and put your phone in download mode before connecting it to PC. Enter serial no and model number into kies.then while phone is in download mode . connect it to PC. This should begin the upgrade process. After it finishes, factory reset phone. Let me know if that doesn't work
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Okay, I tried wipe data/cache, flashing older stock rom, cf-autoroot, triangle away, then flashing newer stock rom using KIES and wipe data/cache again. Still same problem, sometimes system status is Modified and sometimes Normal. This is so weird problem...

First flash with kies and do a factory reset after. You should not be rooted after using kies. Do not restore applications from any previous backup. Only install applications manually. Do not restore data either .start fresh. wipe external sd card. Do not freeze or uninstall any system applications. I recently uninstalled "chat on" and got a system modified status that only went away after reflashing my rom. Dont sideload apps . Dont check off unknown sources under security. If that doesnt work I really don't know any thing else.stock rom kernel firmware apps all from playstore no root apps.
Sent from my GT-I9300 using xda premium

ashraf sharif said:
First flash with kies and do a factory reset after. You should not be rooted after using kies. Do not restore applications from any previous backup. Only install applications manually. Do not restore data either .start fresh. wipe external sd card. Do not freeze or uninstall any system applications. I recently uninstalled "chat on" and got a system modified status that only went away after reflashing my rom. Dont sideload apps . Dont check off unknown sources under security. If that doesnt work I really don't know any thing else.stock rom kernel firmware apps all from playstore no root apps.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
I found another thread where someone has had same kind of problem and he had not done ANY modifications to the phone: http://forums.whirlpool.net.au/archive/2022690
It still said Custom on System Status. I'm starting to believe that there is something wrong with Android that makes System Status randomly show Custom even if no modifications has been done.

i read the link you posted. i would try to either wipe the sd card or remove it just to eliminate that being the issue. also i would suggest you make sure unknown sources is not ticked. and most importantly that you do not batch restore apps. especially app data. one question i have is do you encrypt your file system? for security? and is your rom carrier branded. I know all of the instrucions and questions seem like a tall order but this is how to troubleshoot by process of elimination what is causing the custom status. i hope you get this worked out...

I really appreciate your help ashraf sharif. I just wouldn't like to install all my apps again (did it few times already). I googled the issue more and some people believe Modified status is related to External SD card somehow:
https://code.google.com/p/android/issues/detail?id=41540
http://forums.androidcentral.com/samsung-galaxy-note-2-rooting-roms-hacks/277639-factory-reset-device-status-modfied.html
So i might give up with this issue. It sometimes says Normal and occasionally Modified but the good thing is the phone is working fine

I Titanium Back up and when mine shows as modified I use it to clear the cache then reboot and it reverts to normal.

The OP prefers to not be rooted so tb wont work. Myself am rooted and always have normal status.
Sent from my GT-I9300 using xda premium

ashraf sharif said:
The OP prefers to not be rooted so tb wont work. Myself am rooted and always have normal status.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Then if he wants stock why not use this:
http://forum.xda-developers.com/showthread.php?t=1942150

The link is for rooted roms. OP wants to NOT be rooted. more importantly he wants normal status . Hiz problem is sometimes his phone shows modified and sometimes it shows normal.
Sent from my GT-I9300 using xda premium

ashraf sharif said:
The link is for rooted roms. OP wants to NOT be rooted. more importantly he wants normal status . Hiz problem is sometimes his phone shows modified and sometimes it shows normal.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Then why did he put a custom rom on his mobile ?
He said he returned it to stock but then put on a custom kernel....

Raistlin1158 said:
Then why did he put a custom rom on his mobile ?
He said he returned it to stock but then put on a custom kernel....
Click to expand...
Click to collapse
I used Custom roms before but wanted to flash everything back to Stock and Official. I flashed Stock rom and then Custom kernel so i could use Triangle Away to reset the Custom flash counter in Download Mode. Then after using Triangle Away i flashed Stock Rom. So my intention was to make everything on the phone Stock/Official again.

Does your phone say modified when you take out the external sd card? You can simply unmount it shut down the phone and then remove it just to make see if maybe that is the issue. If it is whats causing the modified status then just backup whatever files you want to keep. And then format the card. You should be good to go
Sent from my GT-I9300 using xda premium

Related

Big flash issue, need your help!

Hello,
I got a note a few days ago, originally in KKA, i installed CF Root with CWM and Mobile Odin, downloaded LA4 firmware, and flashed with wipe data & cache (md5 check done). After reboot if i go in app manager, i can see ALL the apps i installed previously, all 0,00O in grey and with name like "com.antek.am" etc... What the hell?! Also there's no Android Market and some other missing apps... What did i done wrong?! Please help me
Thanks.
kojinmalia said:
Hello,
I got a note a few days ago, originally in KKA, i installed CF Root with CWM and Mobile Odin, downloaded LA4 firmware, and flashed with wipe data & cache (md5 check done). After reboot if i go in app manager, i can see ALL the apps i installed previously, all 0,00O in grey and with name like "com.antek.am" etc... What the hell?! Also there's no Android Market and some other missing apps... What did i done wrong?! Please help me
Thanks.
Click to expand...
Click to collapse
Try clearing cache,dalvik cache and finally do a factory reset and see if it is gone.It may be caused by the leftovers in /data partition.It must probably resolve your problem.My advice is (thought ketan said it to me first) after flashing any rom its better to do a factory reset and clear cache.You can do it in recovery
I solved it just after posting this by factory reset, thanks anyway. I knew about cache, i did wipe, but i didn't thought of factory reset (and still don't understand that well).
kojinmalia said:
I solved it just after posting this by factory reset, thanks anyway. I knew about cache, i did wipe, but i didn't thought of factory reset (and still don't understand that well).
Click to expand...
Click to collapse
Factory reset wipes /data partition which contains the apps and its data downloaded from market/internet.It also wipes your settings data and restore every thing to factory default.Just explained this because you said still don't understand that well.Good to hear you solved your issue on your own
Yes, thanks. If i don't want to keep my mobile and return it for refund (i still have few days) and if flash with the firmware it came with it, modified kernel i installed will be replaced by original (it's in the firmware) and so they'll accept it as return, right?
Yes. Just flash your stock Rom via PC Odin, and everything will be back the way it was when you purchased your phone.
Why ODIN desktop and not mobile? Without everoot, cwm and else... Of course!
If u flash any stock ROM via Mobile Odin or CWM, The CWM Recovery will not be flashed and it remains as it is. So you have to flash using PC Odin to get Stock recovery too.
ompurpi
One problem with pc odin. Yelllow triangel.
Not if flashing a stock ROM
Rigby2011 said:
One problem with pc odin. Yelllow triangel.
Click to expand...
Click to collapse
That's exactly why i talked about using mobile instead. But apparently won't flash cwm, can't do it in any way with mobile version? Last thing: As of now, i tried only stock roms. Can i try custom (ICS of course..) installing it by ODIN MOBILE and not wiping (it's just for test), then flash stock later, everything will still be back in its place like original, they won't know i used custom rom, right?
kojinmalia said:
Can i try custom (ICS of course)
Click to expand...
Click to collapse
Yes certainly you can try custom roms bruh!! However all the ICS Roms demand everyday high maintenance so IMO installing a GB rom will be a sane option as if now, even if you just want to test that....
If u want a suggestion then go with rocket rom gb v22 my personal favorite however all the other gb roms are stable and can ne used on daily basis.
Peace
SHOT from my LOADED GT-N7000!!
kojinmalia said:
they won't know i used custom rom, right?
Click to expand...
Click to collapse
This can be achieved easily!! You have to Install Chainfire's Repack via Mobile Odin then install "Triangle Away" App to remove yellow Triangle on Start up. Then flash again the stock firmware using PC Odin.
It is confirmed work!!
This was just an skeletal overview for indepth steps please refer to the corresponding threads!!
SHOT from my LOADED GT-N7000!!
Thanks for the answer, i already have Odin Mobile and always flashed with it, so no triangle. Chainfire repack, i should install that only if i wanna try ICS, right?
kojinmalia said:
Thanks for the answer, i already have Odin Mobile and always flashed with it, so no triangle. Chainfire repack, i should install that only if i wanna try ICS, right?
Click to expand...
Click to collapse
Flashing stock kernal doesnt give triangle in any way.I would suggest you not to use ICS leak rom as many suffered from not able to go back to stock after that.As of now I know only 1 developer has recovered his note after struggling for nearly 10 hours.So stay away from it.I dont know about other ICS roms.But its better to stay with GB now.
if you are planning to return it, then do not try ICS. the leak is not for Note and this caused many users (of Note and Epic 4 touch) issues like a fried flash drive. All the GB custom ROMs are pretty much stable.
I'm about to start. I have "Odin3 v1.85" that's the right one? I already have the KKA firmware md5 file, i put it in phone or pda? What should i put in CSC & other case? And where do i get the right files?
Please anyone..?
Sent from my R800i using XDA
kojinmalia said:
I'm about to start. I have "Odin3 v1.85" that's the right one? I already have the KKA firmware md5 file, i put it in phone or pda? What should i put in CSC & other case? And where do i get the right files?
Click to expand...
Click to collapse
If you have just one file, put it in PDA. It contains everything you need.
Thanks, that's ok, now concerning the internal memory, 11gb, what should i do? I can't remember/know all the files that were created by me/my apps, also i don't think i can/should delete it all? What do you think?

[Q] Which Kernel to Update?

Hi,
I am using XXLSA-UNP right now. Can i use PhilZ-cwm6-XXLSC-XJB or will i have to use PhilZ-cwm6-XXLSC-XJB-v3.99...i know that only LS should matter but just making sure if XXLSC would work or not?
Attaching screenshot
treacherous_hawk said:
Hi,
Can i use PhilZ-cwm6-XXLSC-XJB or will i have to use PhilZ-cwm6-XXLSC-XJB-v3.99...
Click to expand...
Click to collapse
What does this mean.? Both are the same. Yes you can use lsc kernel on lsa rom as well.
will i again have to do factory reset and wipe cache and all...also when ever i try to move any app using TBP to external memory and after that when i restart my phone that app gets uninstalled and have to reinstall them...is there something that could be done to avoid this?
Changing kernel does not need any kind of wipe. Apps. Moved to sd removes its icon from the home screen. This was a bug in some ics versions, and it's in JB too. So this may be resolved in the official JB
nokiamodeln91 said:
Changing kernel does not need any kind of wipe. Apps. Moved to sd removes its icon from the home screen. This was a bug in some ics versions, and it's in JB too. So this may be resolved in the official JB
Click to expand...
Click to collapse
so there is no fix till the time official JB is out? i mean someone might have tried to create a fix for this or not?
It only happens on apps that you force using tbp. The ones that give the option to be moved to sd in applications Works fine.
yes that is what happens, and i have another problem for which i do not want to create another thread, please help me with this...
i installed JB xxlsa to my frnds phone (no root), i installed PhilZ-cwm6-XXLSC-XJB...from pc odin and did factory reset and also reset system, data, cache and also clean cache and clean delvik cache...and now it is stuck on samsung logo with yellow triangle...i am able to go to recovery mode n download mode...in recovery mode it says "failed to mount exfat"...there is no external sd card...please tell me what needs to be done....
treacherous_hawk said:
yes that is what happens, and i have another problem for which i do not want to create another thread, please help me with this...
i installed JB xxlsa to my frnds phone (no root), i installed PhilZ-cwm6-XXLSC-XJB...from pc odin and did factory reset and also reset system, data, cache and also clean cache and clean delvik cache...and now it is stuck on samsung logo with yellow triangle...i am able to go to recovery mode n download mode...in recovery mode it says "failed to mount exfat"...there is no external sd card...please tell me what needs to be done....
Click to expand...
Click to collapse
Can someone help me..answer me...here is the exact error code "failed to mount exfat/dev/block/mmcb1k1p1/sd card"...
Sent from my GT-N7000 using xda app-developers app
Well if there is no (removable) extSdCard then it stands to reason that recovery will report an error when it looks for it. Yellow triangle will occur when flashing any custom kernel with PC Odin and can be removed with Triangle Away app.
JB leaks sometimes get stuck on reboot. Try installing a custom LSC version and use recovery to install zip from (non removable) internal SD card.
Sent from my GT-N7000 using xda app-developers app
In your last post you said reset system, data, cache. Does that mean format? If that's th case there is no rom on the phone to boot. You need to install a custom rom using recovery or stock rom using the download mode. :thumbup:
I missed the "system" part this time.
Sent from my GT-N7000 using xda app-developers app
you guyz were late in responding and i realised it already that already that ROM is missing and flashed ROM again..thanks to all the members of this forum...you guyz help so many people and hats off to nokiamodeln91 i usually see him as the first one to respond to any thread...(no sarcasm, i mean it)

[Q] Stockifying a GT-I9305(N)

I have used Triangle Away on XXBMA2 and the sboot it came with and while the flash counter is successfully reset, my system status flag is not, it keeps saying "custom" whatever I do with Triangle Away. Has anyone successfully stockified their I9305, and if so, which ROM and sboot? Does it even depend on sboot?
You need to do a complete wipe too.
CalInTheZone said:
You need to do a complete wipe too.
Click to expand...
Click to collapse
Yes I have done that. I started on XXBMA2, rooted and stuff, used Triangle Away and before booting I went into download mode and flashed completely stock. After that didn't work I rooted again, used Triangle Away again, and again, before booting I flashed stock. The only thing being reset is the flash counter.
I think you doing something wrong. Take it easy, root first or use pre-rooted rom. Use TA and let it finish job, boot normally. Once you've done it, reboot to DL mode, use Odin to flash Stock ROM. Restart your phone, go to Back up & Reset section in menu, select Factory Reset and voila. Should be clean as New
Sent from my GT-I9305 using xda app-developers app
Here is what I did on my Note 10.1:
Flashed ROM with correct CSC
Autorooted (Chainfire you know)
Ran TA
Before the device could boot entered recovery (on the phone you can pull the battery)
Did a full wipe
And all was virgin.
Just use this and all your problems will be solved...
http://forum.xda-developers.com/showthread.php?t=1942150
Why use this Root Method? Well the main reasons are:
- You have a complete Odin Flashable ROM Package.
- No Insecure Kernels are used or required.
- You can flash these packages on Non-Rooted devices
- The Binary Flash Counter will NOT increase when flashing these ROM Packages.
- The Red Exclamation Mark will NOT appear at boot up.
- And finally, you only have to flash one file in Odin and you have a complete firmware including Root Permissions.
Raistlin1158 said:
Just use this and all your problems will be solved...
http://forum.xda-developers.com/showthread.php?t=1942150
Why use this Root Method? Well the main reasons are:
- You have a complete Odin Flashable ROM Package.
- No Insecure Kernels are used or required.
- You can flash these packages on Non-Rooted devices
- The Binary Flash Counter will NOT increase when flashing these ROM Packages.
- The Red Exclamation Mark will NOT appear at boot up.
- And finally, you only have to flash one file in Odin and you have a complete firmware including Root Permissions.
Click to expand...
Click to collapse
Yeah but he need to send his phone to Service Centre for repair so Pre-Rooted Rom is out of game I guess...
Sent from my GT-I9305 using xda app-developers app
Its shows as original with a zero count so all he has to do is remove any apps that need root and he will be fine.
Raistlin1158 said:
Its shows as original with a zero count so all he has to do is remove any apps that need root and he will be fine.
Click to expand...
Click to collapse
I know all about it and you right but.... His phone is fully working (except Modem) and it's risky sending it rooted even if counter shows 0, imho....
Sent from my GT-I9305 using xda app-developers app
djembey said:
I know all about it and you right but.... His phone is fully working (except Modem) and it's risky sending it rooted even if counter shows 0, imho....
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
As long as I can get the system status to appear original I don't care how I do it hehe.
Rekoil said:
As long as I can get the system status to appear original I don't care how I do it hehe.
Click to expand...
Click to collapse
Did you try my "recipe"? Because I've done that three times with three different devices. All successful.
CalInTheZone said:
Did you try my "recipe"? Because I've done that three times with three different devices. All successful.
Click to expand...
Click to collapse
I will give it a go this evening.
Good luck... If you don't succeed and you are in the area of Höör this weekend then contact me and I'll give it a try
Hi, i got a GT-I9305N too , you get system status flag as custom because your phone is still rooted, any modified changes in /system will make your system status as custom like su or busybox. In order to get system status flag to official, you need to reflash your phone with a stock rom with odin3 (Unroot the phone). Send me a private message and i'll link the right stock rom to you if you want, Comviq/tele2 rom if you bought the phone from them or nordic countries.
Use this to find the correct rom : http://samsung-updates.com/device/?id=GT-I9305#sthash.YrJ0gDPY.dpuf
Good luck :good:
Sv: [Q] Stockifying a GT-I9305(N)
Raistlin1158 said:
Use this:
Galaxy S 3 LTE GT-I9305 TLA I9305XXBMA4 Android 4.1.2 - Released 10.01.2013, Change log 746327
See more at: http://samsung-updates.com/device/?id=GT-I9305#sthash.YrJ0gDPY.dpuf
Good luck :good:
Click to expand...
Click to collapse
With this release he needs luck... wrong baseband.
Swyped on my Galaxy S III LTE
CalInTheZone said:
With this release he needs luck... wrong baseband.
Swyped on my Galaxy S III LTE
Click to expand...
Click to collapse
Baseband wouldn't work anyway, I need Perseus kernel for that to work, which is the whole reason why I am returning to stock (for service). The way I see it: as long as I can get the system status flag to say 'official' it doesn't matter how I do that because after I can flash any other official rom and the flag wont get touched, so I can return to my stock carrier rom anyway (which by the way is Tele2/Comviq as tico96 suggested).
Thanks for all the tips, I will give it another go tonight.
This is what I did just now:
While running XXBMA2 rooted and with Perseus kernel I applied Triangle Away
Rebooted straight into download mode (by holding home, vol down and power, should I be powering off normally first?)
Installed stock XXALIA
Cleared data
And the result?
Custom binary download: no
Current binary: Samsung official
System status: custom
Operating system status shows "modified"
Can someone honestly tell me they have been able to reset the system status flag on this hardware and also let me know exactly which ROM package they did it from and how they rooted etc. I don't care whether it is for I9305, I9305N or I9305T, radio working doesn't matter to me at all (because if radio has to work for it to revert to stock then I am ****ed either way).
I just want to return to system status: official or normal or whatever it is supposed to say.
Your non stock kernel is your problem. Just as soon as you boot with that you are "modified". Everything has to be stock kernel/recovery/CSC just with SU and you have to run TA and do a complete wipe before the system notice it's rooted. Then you are modified again.
CalInTheZone said:
Your non stock kernel is your problem. Just as soon as you boot with that you are "modified". Everything has to be stock kernel/recovery/CSC just with SU and you have to run TA and do a complete wipe before the system notice it's rooted. Then you are modified again.
Click to expand...
Click to collapse
Ok, so before running TA I have to have a stock kernel? But don't I need to reboot into a special mode if I have a secure kernel... meaning I end up booting a secure kernel to do the TA from anyway?
Come to think of it, I don't think I've ever run TA on a system with stock kernel and recovery... I always assumed that I could replace those directly after, perhaps the check is done when I go into download mode? Will try that tonight!

[Q] How to completly unroot my note

my company just moved there email system from good to airwatch, the problem is airwatch started detecting as my phone as rooted ( which was :lol: ).... So I booted in stocked recovery did a factory reset and re-flashed a stock ROM using ODIN.
The problem is Airwatch still identifies the phone as "rooted /compromised" any idea how to completely unroot it or really reset to default
thankx
Flash a 3 part gb rom. Before flashing do a wipe of cache and data from recovery. Flash with pc odin, then do full wipe from recovery of gb, should clear any traces.
Sent from my GT-N7000 using xda premium
panch said:
my company just moved there email system from good to airwatch, the problem is airwatch started detecting as my phone as rooted ( which was :lol: ).... So I booted in stocked recovery did a factory reset and re-flashed a stock ROM using ODIN.
The problem is Airwatch still identifies the phone as "rooted /compromised" any idea how to completely unroot it or really reset to default
thankx
Click to expand...
Click to collapse
follow the instructions of SpyderTracks only instead of install you can also install jb gb, it is important to do all the wipe format and send it in download mode directly from recovery
panch said:
my company just moved there email system from good to airwatch, the problem is airwatch started detecting as my phone as rooted ( which was :lol: ).... So I booted in stocked recovery did a factory reset and re-flashed a stock ROM using ODIN.
The problem is Airwatch still identifies the phone as "rooted /compromised" any idea how to completely unroot it or really reset to default
thankx
Click to expand...
Click to collapse
Is your counter set to '0'?
Thankx.. for the suggestions, let me give them a try
Also yes the counter is set to zero
panch said:
Thankx.. for the suggestions, let me give them a try
Also yes the counter is set to zero
Click to expand...
Click to collapse
I have tried Google... I am drawing a blank.
Can somebody point me to official 3 part N7000 ROM for StarHub- Singapore.
All the rom I am getting are single file.
There is no need for that rom. Just boot into a Cwm recovery. (if you have already Un rooted then install Philz kernel.) . Format the system, data, cache and preload partitions and then choose reboot download. Then flash a stock rom again.
Sent from my GT-I9500 using xda premium
Thankx ... but did not work
Airwatch still is pain in back side....
use different email app to connect that support airwatch, whatever that is.
Or hack airwatch app if that exists to not check
Or dont allow it root...
Sent from my GT-N7000 using Tapatalk 2
You could also try ota rootkeeper from the playstore to temporarily disable root.
Sent from my GT-I9500 using xda premium

Help - Did I soft-brick my i9305???

Hello knowledgeable people!
I did a very stupid thing!... I took an official Samsung ROM package .tar.md5, remove the .md5 extension, extracted it, replaced boot.img with a custom kernel boot.img and re-compressed into a .tar package.
Then I took this .tar package and flashed it on the phone with Odin on my PC.
That didn't work, as expected.
The process blocked at one point.
I thought I will then just have to flash the Samsung official ROM to get everything back.
Well... not! I can flash the Samsung official ROM with Odin on my PC, but when the phone starts, it get stucked on bootloop on the glowing samsung logo.
I tried many things, including:
* wipe cache
* wipe data
but nothing worked...
At this point, I think I need to repartition/format everything and start from scratch but I don't know how to do this...
I tried to flash the Partition Identification Table kindly uploaded by @lyriquidperfection, but it didn't work (see here: http://forum.xda-developers.com/showthread.php?t=1950591) and it gets stuck in Odin as @narcarsiss mentions here: http://forum.xda-developers.com/showpost.php?p=33145970&postcount=2
Anyone has an idea?
> How to re-partition/re-format properly?
> Any other method to solve the bootloop?
Thanks for your help!
Why not to flash stock Sammy rom through Odin? This time - not modified?
Flash stock Sammy latest ROM .
Wipe everything in recovery and it should work.
I always have to wipe **** when installing official Sammy ROM.
Else it will stay at Samsung screen with flashing letters
Sent from my GT-I9305 using xda app-developers app
Hbohd said:
Why not to flash stock Sammy rom through Odin? This time - not modified?
Click to expand...
Click to collapse
This is what I tried... but it still get stuck at glowing samsung logo...
toeterbaas said:
Flash stock Sammy latest ROM .
Wipe everything in recovery and it should work.
I always have to wipe **** when installing official Sammy ROM.
Else it will stay at Samsung screen with flashing letters
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the answer.
What do you mean "wipe ****"?
Could you detail the steps?
1. Flash official sammy ROM through odin
2... enter recovery? (please confirm)
3... wipe what?
Thanks!
Have you tried flashing another kernel?Boeffla Etc then use KIES or Odin to flash back to stock
Sent from my GT-I9305 using xda app-developers app
Yes enter recovery after flashing with Odin.
When u power on hold volume up home key and power all at the same time release them when u see Samsung gt i9305 then wipe cach and wipe the other one. There are 2 wipe options.
Your phone should boot now it takes some time the first time around a minute.
Let me know if it worked
- flash stock Samsung ROM for your country with Odin
- go to recovery wipe the 2 options When u power on hold volume up home key and power all at the same time release them when u see Samsung gt i9305
-phone should boot takes a minute before he goes trough the flashing Samsung screen.
Sent from my GT-I9305 using xda app-developers app
---------- Post added at 09:51 AM ---------- Previous post was at 09:47 AM ----------
All you have to do is follow my steps.
It should work now
Sent from my GT-I9305 using xda app-developers app
Looki75 said:
Hello knowledgeable people!
I did a very stupid thing!... I took an official Samsung ROM package .tar.md5, remove the .md5 extension, extracted it, replaced boot.img with a custom kernel boot.img and re-compressed into a .tar package.
Then I took this .tar package and flashed it on the phone with Odin on my PC.
That didn't work, as expected.
The process blocked at one point.
I thought I will then just have to flash the Samsung official ROM to get everything back.
Well... not! I can flash the Samsung official ROM with Odin on my PC, but when the phone starts, it get stucked on bootloop on the glowing samsung logo.
I tried many things, including:
* wipe cache
* wipe data
but nothing worked...
At this point, I think I need to repartition/format everything and start from scratch but I don't know how to do this...
I tried to flash the Partition Identification Table kindly uploaded by @lyriquidperfection, but it didn't work (see here: http://forum.xda-developers.com/showthread.php?t=1950591) and it gets stuck in Odin as @narcarsiss mentions here: http://forum.xda-developers.com/showpost.php?p=33145970&postcount=2
Anyone has an idea?
> How to re-partition/re-format properly?
> Any other method to solve the bootloop?
Thanks for your help!
Click to expand...
Click to collapse
Tnx for the mention, but i heade bad news. I had to send my phone away to fix the issue.
This was a long time ago that this happened and better methods may of been discovered. Good luck:good:
narcarsiss said:
Tnx for the mention, but i heade bad news. I had to send my phone away to fix the issue.
This was a long time ago that this happened and better methods may of been discovered. Good luck:good:
Click to expand...
Click to collapse
Thanks for your answer!
I fear sending S3 to Samsung for repair is the only way, unfortunately... This is what I will do tomorrow (in 10hrs from now) unless a white knight arrives on this thread and gives me the golden solution!
You havent mentioned what rom version you tried.
I guess you used 4.3 official?
I could only guess but ther is probably more then just boot.img containing Knox code.
Knox is hindering users from downgrading bootloader and that maight be your problem now.
You did not mention wich version you try to recover to either.
So if you try with the old 4.1.2 it may be impossible.
Perhaps you need the newest official rom to get it working.
Sent from my GT-I9305 using XDA Premium 4 mobile app
tissot said:
You havent mentioned what rom version you tried.
I guess you used 4.3 official?
I could only guess but ther is probably more then just boot.img containing Knox code.
Knox is hindering users from downgrading bootloader and that maight be your problem now.
You did not mention wich version you try to recover to either.
So if you try with the old 4.1.2 it may be impossible.
Perhaps you need the newest official rom to get it working.
Sent from my GT-I9305 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks for your answer.
The home made package was on 4.3 base.
Then I tried to reflash official 4.3.
I will give a try with 4.1.2...
Well... didn't work either... since I already had knox bootloader...
It shows "unsupported version".
Oh well...
tissot said:
You havent mentioned what rom version you tried.
I guess you used 4.3 official?
I could only guess but ther is probably more then just boot.img containing Knox code.
Knox is hindering users from downgrading bootloader and that maight be your problem now.
You did not mention wich version you try to recover to either.
So if you try with the old 4.1.2 it may be impossible.
Perhaps you need the newest official rom to get it working.
Sent from my GT-I9305 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You can't flash the old version. Odin will revert it back while installing.
Sent from my GT-I9305 using xda app-developers app
Looki75 said:
Thanks for your answer.
The home made package was on 4.3 base.
Then I tried to reflash official 4.3.
I will give a try with 4.1.2...
Click to expand...
Click to collapse
Okey
A bit far feched but is it possible your download is broken? Try DL again.
And either it is or not you could try installing 4.3 from different region as yours. Just to try every possability.
It shouldnt be impossible to fix this stupid phone
You dont have any nandroid backup some where.
Last option. Throw it on a brick wall to release som aggrevation and then you buy a Nexus 5. Problem solved.
Sent from my GT-I9305 using XDA Premium 4 mobile app
tissot said:
Okey
A bit far feched but is it possible your download is broken? Try DL again.
And either it is or not you could try installing 4.3 from different region as yours. Just to try every possability.
It shouldnt be impossible to fix this stupid phone
You dont have any nandroid backup some where.
Last option. Throw it on a brick wall to release som aggrevation and then you buy a Nexus 5. Problem solved.
Sent from my GT-I9305 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You made me laugh!
Seriously: DL is OK (I flashed this very official ROM many times in the past) and I do have a nandroid, but result is the same (stuck at glowing samsung logo).
The issue is way deeper.
Thanks for your help! Before trying the brick wall, I will try to make it repaired by Samsung!
Looki75 said:
You made me laugh!
Seriously: DL is OK (I flashed this very official ROM many times in the past) and I do have a nandroid, but result is the same (stuck at glowing samsung logo).
The issue is way deeper.
Thanks for your help! Before trying the brick wall, I will try to make it repaired by Samsung!
Click to expand...
Click to collapse
I had a brick once, butthe situation was a bit different. I have knox bootloader and tried to downgrade to a 4.1.2 rom without the bootloader package. The flash went ok, but my phone was stucked on Samsung Galaxy S3 GT-I9305 screen. After that, i was quite desperate and tried to reflash stock 4.3 via odin, but it failed :S
Then i tried to flash official Germany's 4.3 again, this time with the ODIN version inside CF-Root package (http://download.chainfire.eu/232/CF-Root1/CF-Auto-Root-m3-m3zh-gti9305.zip?retrieve_file=1), put the cable in another USB port, killed every kies proccess and rebooted phone in dowwnload mode. This time the flash went ok, i rebooted the phone into recovery (got bootloop) and wipe cache and factory reset. After this the phone booted up normally. Hope you can fix your phone
shucrut said:
I had a brick once, butthe situation was a bit different. I have knox bootloader and tried to downgrade to a 4.1.2 rom without the bootloader package. The flash went ok, but my phone was stucked on Samsung Galaxy S3 GT-I9305 screen. After that, i was quite desperate and tried to reflash stock 4.3 via odin, but it failed :S
Then i tried to flash official Germany's 4.3 again, this time with the ODIN version inside CF-Root package (http://download.chainfire.eu/232/CF-Root1/CF-Auto-Root-m3-m3zh-gti9305.zip?retrieve_file=1), put the cable in another USB port, killed every kies proccess and rebooted phone in dowwnload mode. This time the flash went ok, i rebooted the phone into recovery (got bootloop) and wipe cache and factory reset. After this the phone booted up normally. Hope you can fix your phone
Click to expand...
Click to collapse
Thanks! Any idea is valuable!
How did you create the ball pack of "4.1.2 rom without the bootloader" - in other words: how did you remove the bootloader from there?
Looki75 said:
Thanks! Any idea is valuable!
How did you create the ball pack of "4.1.2 rom without the bootloader" - in other words: how did you remove the bootloader from there?
Click to expand...
Click to collapse
I'd used this tutotial (just the part of commands, added everything that the original ".md5" has, removing just the "sboot.img", i'm not 100% sure if this is the only file to be off the new package, as i said, didnt work for me ), the only difference is that i'm using cygwin instead of linux itself, it worked like a charm
Basically all u need to do is unpack a original .md5 firmware (use winrar or so) and move the files (except sboot.img) to your home directory of linux or, in my case, cygwin (originally C:\cygwin\home\user-name), start the console and type the command bellow, switching the ".imgs" to match yours, of course:
Code:
cd $HOME
tar -H ustar -c image_1 image_2 > your_odin_package.tar
After this you must have a 1Gb+ .tar file (considering you will make a stock samsung flashable), now you will add md5 checksum to that, just to avoid troubles:
Code:
md5sum -t your_odin_package.tar >> your_odin_package.tar
mv your_odin_package.tar your_odin_package.tar.md5
and voilà, you have your flashable odin package. Of course you can try making one with just the system.img, boot.img and modem.img. If the phone boots up, do a factory reset. I have no idea if this will work in any occasion having knox bootloader trying to flash official 4.1.x, but you can also try with a samsung 4.3 rom.
In the last scenario, try to CF auto-root your phone, then flash an official CWM recovery via odin using this method i told u, boot into recovery and flash a custom rom, do a factory reset and wiping cache and dalvik cache. I hope one of the options work for you.
I'd recommend trying to flash a custom recovery and then a custom rom. If phone boots up and is functional, try to flash samsung official 4.3 again (if your desire is having the stock of course), not forgeting to factory reset via cwm first to avoid troubles.
Been in maybe like pratically the same situation
1st flash philz touch recovery ( install latest version)
2nd backup ur efs in external sd and copy it to a pc just in case (important if u mess up imei )
3rd Copy and rom in the external sd
4th Wipe data,cache,dilvik
5th In mount and storage Format everything except external sd ( u can backup ur internal sd card with 3rd step)
6th Flash Rom and reboot
7th If no imei then try a newer modem
http://forum.xda-developers.com/showthread.php?t=2572432
http://forum.xda-developers.com/showthread.php?t=2607279
Notice I only could get to run 4.3 to run after formating everything through philz touch recovery

Categories

Resources