Database Develop

[Q] Bootloop with nAa10 on X8/E15i [SOLVED!]

Hi!
I had a problem with my smart (if you call me, it reboot, something reboot automatically). I was using GingerDX v21 and v22. I downgraded to 2.1 via PC Companion but doesn't works.
So, I decided to use MiniCM7. I followed this tuto http://forum.xda-developers.com/showthread.php?t=1068553 and the bootloader unlock tuto too http://forum.xda-developers.com/showthread.php?t=1254225
Well, I did everything correctly, I guess. I see the nAa logo when I turn on my smart and I can enter in CWM-Recovery.
I have installed the MiniCM7-2.1.8-shakira, MiniCM7-2.1.7-shakira, MiniCM7-2.1.6-X8, GingerXperiaRay_V004 and PrimeHD20 but I can't pass of boot (bootlooping).
I don't know if I did something wrong. I had instaled too E15_nAa-09_2.6.29.6-nAa-09 and E15_nAa-06b_2.6.29.6-nAa-06b (first I tried v10). I everytime wipe all data.
If I install the original kernel and rom it works normally. I don't know what I can do. I do the same process three times, wiping all, installing, etc. and nothing!
What I'm doing wrong? There are some possibilities of my smart don't support it?

read this first http://forum.xda-developers.com/showthread.php?t=1011071 to go back to 2.1...
then root, install xrecovery,unlock bootloader,flash nAa kernel you need ,and then
install MiniCM7...

try this method
1.root
2.unlock bootloader
3.flash nAa v10
4.then your phone will have CWM and flash the rom minicm7.218
5.flash google gapps gb
6.reboot and see it bootloop or not??
Sent from my E15i using xda premium

Thanks for all replies.
Well, I did the @kostas_grevena3 method, but I'll do again. Maybe I forget to apply baseband 015! :O Hum...
What I'm doing now:
1. Flashing: Flashtool + X8 Shakira E15i_2.1.1.A.0.6_generic.ftf (success!)
2. Flashing: Flashtool + X8i_2.1.1.A.0.6_Baseband_015.ftf (success!)
3. Drivers yet installed from last tries. (success!)
4. Flashing: Flashtool + E15_nAa-10_2.6.29.6-nAa-10.ftf (success!)
5. Turn on smart, CWM and wipe all (success!)
6. Flashing: CWM + MiniCM7-2.1.8-shakira.zip (success!)
7. Flashing: CWM + gapps-gb-20110828-signed.zip (success!)
8. Rebooting for first time and...
MOTHER
OF
ANDROID!
Thanks you guys!
Feeling like a hacker now haha jk jk
Thanks!

try this.
1. boot in recovery
2. Factury Reset
3. mount/storage format system and sdext if you had an ext partiton
4. flash cm7 rom
5. boot now first complete to rom
6. Reboot to Recovery
7. Now you flash gapps
will it work now?
i remeber an error with odexed roms when i flash another zip before i boot in rom.
edit: oh sorry i see it sloved haha, have fun with your new x8

david.proweb said:
Thanks for all replies.
Well, I did the @kostas_grevena3 method, but I'll do again. Maybe I forget to apply baseband 015! :O Hum...
What I'm doing now:
1. Flashing: Flashtool + X8 Shakira E15i_2.1.1.A.0.6_generic.ftf (success!)
2. Flashing: Flashtool + X8i_2.1.1.A.0.6_Baseband_015.ftf (success!)
3. Drivers yet installed from last tries. (success!)
4. Flashing: Flashtool + E15_nAa-10_2.6.29.6-nAa-10.ftf (success!)
5. Turn on smart, CWM and wipe all (success!)
6. Flashing: CWM + MiniCM7-2.1.8-shakira.zip (success!)
7. Flashing: CWM + gapps-gb-20110828-signed.zip (success!)
8. Rebooting for first time and...
MOTHER
OF
ANDROID!
Thanks you guys!
Feeling like a hacker now haha jk jk
Thanks!
Click to expand...
Click to collapse
is this working?

First of all i would like to thanks all the Developers for their Incredible work on this site. I am using this site for a long time it helped me in solving many issues. I flashed many Custom ROMS on My X8 & X10 never had big issues so there was no need to post just becuase there was already so much of information here. But from last 4 days i am messing with my X8 when i tried flashing Jelly Bean Rom. Previously i was using 2.3.7 in my x8.I cant say i am very good but i am not new to these Roms. I actually searched alot but failed so i am here for help. In order to use Jelly Bean my x8 is having Bootloop issue. I follow all the instructions from http://forum.xda-developers.com/showthread.php?t=1789713 regarding Kernel http://forum.xda-developers.com/showthread.php?t=2136211. I follow each guidelines but still Bootloop . Not only that i cant use any other custom rom now everytime bootloop. SESU repair my phone but i cant use 2.1 now after using custom roms in x8 for longtime, It feels pathetic Now i dnt want Jelly Bean in x8 anymore i ll be more than happy if i get 2.3.7 back :angel:
I tried different Roms , Kernels but everytime same result "Bootloop"
Rooting fine, Flashing Kernel fine,, Rom instalation fine. Had doubt regarding Unlocking Bootloader ( Whether its properly unlocked or not). so Flashtool says Its "unlocked" but it also said it cant be "unlocked officially". So i tried another way to with s1 tools from this link http://forum.xda-developers.com/showpost.php?p=23680742&postcount=1 and r is smaller too RUNNING S1_EROM VER "r8A029". Now i am really confuse. tired and fed up 4 days GingerXperia, JellyBread.Jelly Bean everything failed
But i want to add 1 thing which is related to BLU because i cant dial *#*#7378423#*#* service menu from my x8 is that the clue or issue. Plz members help me out. Thanks in Advance.

Please Help

Damn ..
I have tried many times with naa kernel to flash rooms, but stuck in bootlop.
After I found this tread, flashed baseband 15 (I have selected only baseband to flash), flashed again nAa kernel and then custom ROM and phone is working.
Thanks

[SOLVED] [Q] Getting back to stock ROM

Hi all
I have rooted and unlocked the bootloader but haven't taken the jump and stuck a ROM or kernel on as yet, as am actually quite happy with the stock ROM, and also rely on the headphones, amongst other things - which appear to be a problem on some of the ROMs.
If I do stick a custom ROM on, can I easily get back to the stock one, is there a stock ROM of that which I can flash via CWM ?
I understand that with CWM I (currently) have to instantly stick a ROM on, so presumably cant do a backup of the stock ROM at that point..before putting on FXP or some such
I presume I can use the sony update service, but would that wipe the root ...?
could someone enlighten me
many thanks
nat

xda-nat said:
Hi all
I have rooted and unlocked the bootloader but haven't taken the jump and stuck a ROM or kernel on as yet, as am actually quite happy with the stock ROM, and also rely on the headphones, amongst other things - which appear to be a problem on some of the ROMs.
If I do stick a custom ROM on, can I easily get back to the stock one, is there a stock ROM of that which I can flash via CWM ?
I understand that with CWM I (currently) have to instantly stick a ROM on, so presumably cant do a backup of the stock ROM at that point..before putting on FXP or some such
I presume I can use the sony update service, but would that wipe the root ...?
could someone enlighten me
many thanks
nat
Click to expand...
Click to collapse
Take a backup of what you have now in recovery, and you can always restore.
Also there are plenty of stock .ftfs in the allin one thread in Q&A that can be flashed in flashtool
No.
if you flash cmw from the thread then yeas, but you have unlocke your bootloader, so just flash the advanced stock kernel and then you have recovery without having to reflash a rom...

gregbradley said:
Take a backup of what you have now in recovery, and you can always restore.
Also there are plenty of stock .ftfs in the allin one thread in Q&A that can be flashed in flashtool
No.
if you flash cmw from the thread then yeas, but you have unlocke your bootloader, so just flash the advanced stock kernel and then you have recovery without having to reflash a rom...
Click to expand...
Click to collapse
hi thanks for the reply
this one?
http://forum.xda-developers.com/showthread.php?t=1922925
that has CWM rolled up in it?
and I can simply type
fastboot flash boot Tkernel.elf
using the version of fastboot that came with flashtool
with the phone in fastboot mode (blue LED)?
effectively following steps from here:
http://forum.xda-developers.com/showthread.php?p=23181182#post23181182

xda-nat said:
hi thanks for the reply
this one?
http://forum.xda-developers.com/showthread.php?t=1922925
that has CWM rolled up in it?
and I can simply type
fastboot flash boot Tkernel.elf
using the version of fastboot that came with flashtool
with the phone in fastboot mode (blue LED)?
effectively following steps from here:
http://forum.xda-developers.com/showthread.php?p=23181182#post23181182
Click to expand...
Click to collapse
yes

[Q] How to Revert to STOCK ROM [ LB ]

Hello Team,
I have successfully rooted my XSp using the DoolLord Method and also flashed the CWM but kept LB.
Few days ago I have installed Custom Rom but this made me lose my CWM. I have tried many ways to get my CWM back again but in vain. I do not get the second vibration after the sony Logo to get into CWM.
I have again went through the root procedures of DoomLord, the reboot fix and the Flashed the CWM. I now get the second vibration after the sony logo pressing the Vol + button should get me to CWM but the Xsp reboots. I am now out of steps.
An advise regarding this will be very helpful.
1. I need to get back to my stock Rom [C5302_12.0.A.2.254_India.ftf] using flashtool. So does it require unlocked bootloader to flash it?
2. Is there any way I can get the CWM back keeping this custom ROM so that i could restore the backup i have taken through CWM before installing this custom rom ?
Hope this thread finds helpful to people working on LB.

jishneo said:
Hello Team,
I have successfully rooted my XSp using the DoolLord Method and also flashed the CWM but kept LB.
Few days ago I have installed Custom Rom but this made me lose my CWM. I have tried many ways to get my CWM back again but in vain. I do not get the second vibration after the sony Logo to get into CWM.
I have again went through the root procedures of DoomLord, the reboot fix and the Flashed the CWM. I now get the second vibration after the sony logo pressing the Vol + button should get me to CWM but the Xsp reboots. I am now out of steps.
An advise regarding this will be very helpful.
1. I need to get back to my stock Rom [C5302_12.0.A.2.254_India.ftf] using flashtool. So does it require unlocked bootloader to flash it?
2. Is there any way I can get the CWM back keeping this custom ROM so that i could restore the backup i have taken through CWM before installing this custom rom ?
Hope this thread finds helpful to people working on LB.
Click to expand...
Click to collapse
1. You can flash stock firmware using flashtool even if you are on locked bootloader
2. Try to install cwm manually by just moving the files and giving them right permission if not flash stock rom using flastool then root, install cwm and the restore your backup
Sent from my C5302 using Tapatalk

Siddhesh said:
1. You can flash stock firmware using flashtool even if you are on locked bootloader
2. Try to install cwm manually by just moving the files and giving them right permission if not flash stock rom using flastool then root, install cwm and the restore your backup
Sent from my C5302 using Tapatalk
Click to expand...
Click to collapse
Thanks Bhai.. will give it a shot and get back to you.

Reverted to Stock Framework using flash tool...
Lost all root stuffs that I had. I am gonna keep this way for now till there a stable root process keeping LB
Anyways very much thanks to all who assisted.:good:

Help. My device is stuck on boot animation - cwm and twrp will not load

The title says it all.
I went ahead and tried to install Paranoid android RC2, I flash it then subsequently the GApps using TWRP. Now, the device is stuck forever in the boot animation and neither TWRP or CWM (installed with DualZRecovery) will work.
Is there any way by which I can somehow revert what has happened here? This has never happened to me before.
Needless to say if I can avoid having a $400 paperweight, I have sworn to never risk custom roms on my main phone again.

Just flash some kernel with recovery and restore your backup. If you don't have backup, download some of stock or custom roms and flash via Flashtool or recovery......or just use search function

kraseto said:
Just flash some kernel with recovery and restore your backup. If you don't have backup, download some of stock or custom roms and flash via Flashtool or recovery......or just use search function
Click to expand...
Click to collapse
As I said, the main problem is that for some ungodly reason CWM is not working despite the fact that it is what i used to flash PA into the phone in the first place. I have never had a case where CWM itself failed. I need to be in Fastboot mode for flashtool right?
Well the phone wont even go into recovery so im not sure how to get it into fastboot.

1. Download some of newest stock ftf and put it to firmware folder in Flashtool
2. Start Flashtool, press flash btn and pick stock rom
3. Press vol- and connect usb simultaneously and wait about 3 min.
That's it.
Your phone is brand new stock :good:

kraseto said:
1. Download some of newest stock ftf and put it to firmware folder in Flashtool
2. Start Flashtool, press flash btn and pick stock rom
3. Press vol- and connect usb simultaneously and wait about 3 min.
That's it.
Your phone is brand new stock :good:
Click to expand...
Click to collapse
Well I'd come to the same conclusions myself but I thank ye kind ser.

Did u unlock your bootloader when u flashing pa?
Sent from my C6603 using Tapatalk 2

secondkai said:
Did u unlock your bootloader when u flashing pa?
Sent from my C6603 using Tapatalk 2
Click to expand...
Click to collapse
I think it was because I forgot to wipe the dalvik cache after installation of the ROM - although why CWM itself stopped working I have no clue.

How did u unlock your bootloader? Flashing aosp base rom require u to unlocked your bootloader first bcos of the custom kernel..if u unlocked your bootloader, did u fastboot flash boot.img?
Sent from my C6603 using Tapatalk 2

Xperia SP 4.3 by DooMLoRD

Hello. I did all the steps in DooMLoRD's post, but there is something wrong. The phone is freezing all the time and really slow. After this 1 message appears "System UI has stopped" and then it works better, but when i try to start a game... "(name of the game) has stopped". I ask other guys, but they dont have problens like that on this ROM.
Can you tell me why is that? Thanks in advance!

Did you wipe your phone before installing? Try to install the DooMLoRD's rooted kernel and do a wipe in Recovery. Then, install the ROM again.

lanluckez said:
Did you wipe your phone before installing? Try to install the DooMLoRD's rooted kernel and do a wipe in Recovery. Then, install the ROM again.
Click to expand...
Click to collapse
Actually first i have installed the ROM and then kernel (is like that in the instructions)
Is it posible to have that problem if i unlocked the bootloader or root the phone wrong?

ArcS-un said:
Actually first i have installed the ROM and then kernel (is like that in the instructions)
Is it posible to have that problem if i unlocked the bootloader or root the phone wrong?
Click to expand...
Click to collapse
As long as your bootloader is unlocked root is not important for flashing this ROM. And if you already managed to install custom kernel (for example for aosp based rom) then you successfully unlocked your bootloader. Maybe as the previous post said, try to install DooMLoRD's kernel (The old one) then reboot recovery, wipe, flash 4.3 zip and it should work

pec0ra said:
As long as your bootloader is unlocked root is not important for flashing this ROM. And if you already managed to install custom kernel (for example for aosp based rom) then you successfully unlocked your bootloader. Maybe as the previous post said, try to install DooMLoRD's kernel (The old one) then reboot recovery, wipe, flash 4.3 zip and it should work
Click to expand...
Click to collapse
I have installed this one: SP-4.3_leak_256-DooMLoRD_AdvStkKernel-v1 Is that the new one ?
I found this: SP-DooMKernel-v03 and SP-DooMKernel-v04
Is that the older kernels ? Because i try the kernel in the ZIP with the ROM and there is no recovery...

Guys....
Im trying to install leaked 4.3 but have issue
1.flashed .254 using flash tool
2.Rebooted
3.Flashed Advanced kernel via fastboot
4.Rebooted
but when i turn on the phone after that,it vibrates once and then there is no display.
so i flashed .254 stock kernal but that didnt fix the issue
As of now im on .254 stock ROM with bootloader locked again
Please explain me step by step process to get this done with 4.3 plzzz
Please note that my phone even though was c5302 always displayed as c5303 in PC companion but it isnt now.

sabertooth777 said:
Guys....
Im trying to install leaked 4.3 but have issue
1.flashed .254 using flash tool
2.Rebooted
3.Flashed Advanced kernel via fastboot
4.Rebooted
but when i turn on the phone after that,it vibrates once and then there is no display.
so i flashed .254 stock kernal but that didnt fix the issue
As of now im on .254 stock ROM with bootloader locked again
Please explain me step by step process to get this done with 4.3 plzzz
Please note that my phone even though was c5302 always displayed as c5303 in PC companion but it isnt now.
Click to expand...
Click to collapse
Okay! Do it this way
Unlock ur Bootloader
Flash stock .254 ftf
Then root and install cwm by locked bootloader method
( by installing previous firmware kernel ftf, root by doomloard kit, install cwm of locked bootloader then flash ur latest. 254 kernel ftf)
Now just flash the 4.3 rom through Cwm without Wiping anything
Sent from my C5303 using XDA Premium 4 mobile app

sabertooth777 said:
Guys....
Im trying to install leaked 4.3 but have issue
1.flashed .254 using flash tool
2.Rebooted
3.Flashed Advanced kernel via fastboot
4.Rebooted
but when i turn on the phone after that,it vibrates once and then there is no display.
so i flashed .254 stock kernal but that didnt fix the issue
As of now im on .254 stock ROM with bootloader locked again
Please explain me step by step process to get this done with 4.3 plzzz
Please note that my phone even though was c5302 always displayed as c5303 in PC companion but it isnt now.
Click to expand...
Click to collapse
Of course, cause u havent flashed the rom yet! You only flash the kernel, not the rom.
Now do it exactly as you did before, but after flashing the kernel and rebooting, tap the volume uo button continuously until you boot into cwm. And then you can flash the rom through cwm.
Dont forget to copy the zip in your ext sdcard before flashing the kernel!
Cheers.

I don't have the Take Screenshot option in the power menu. Is that normal ? Is it disabled by default or something ?

ArcS-un said:
Hello. I did all the steps in DooMLoRD's post, but there is something wrong. The phone is freezing all the time and really slow. After this 1 message appears "System UI has stopped" and then it works better, but when i try to start a game... "(name of the game) has stopped". I ask other guys, but they dont have problens like that on this ROM.
Can you tell me why is that? Thanks in advance!
Click to expand...
Click to collapse
Read. You clearly haven't read the thread by Doomlord, you should. "WHY WONT IT READDDDD"

Robin>Hood said:
Read. You clearly haven't read the thread by Doomlord, you should. "WHY WONT IT READDDDD"
Click to expand...
Click to collapse
Did you notice that this is my POST with my PROBLEM ?

marsx1984 said:
I don't have the Take Screenshot option in the power menu. Is that normal ? Is it disabled by default or something ?
Click to expand...
Click to collapse
YES its normal
even i dont have it
for taking screenshot press vol down and power button together