Hello Gurus out there,
How hard is to have CWM 6.0.3.5 Advanced Edition / PhilZ Touch 5.10.7 + exFAT + NTFS with this devise?
That will definitely will add horse powers to Atrix HD in a stylish way. How hard is for us to have it?
:fingers-crossed:
SVLAN said:
Hello Gurus out there,
How hard is to have CWM 6.0.3.5 Advanced Edition / PhilZ Touch 5.10.7 + exFAT + NTFS with this devise?
That will definitely will add horse powers to Atrix HD in a stylish way. How hard is for us to have it?
:fingers-crossed:
Click to expand...
Click to collapse
RAZR HD -- Likely to work
US -- Same as TWRP.....
skeevydude said:
RAZR HD -- Likely to work
US -- Same as TWRP.....
Click to expand...
Click to collapse
Thanks skeevy for your reply.
But I was wondering if the one posted on my link be done for this devise instead.
I have more options and is much more different as it look more like TWRP when it comes to the UI
If you ask me is sexy as %&^%& :laugh::good:
He's saying it doesn't work for us because the touch zones are off.
Sent from my PACMAN MATRIX HD MAXX
deeje00 said:
He's saying it doesn't work for us because the touch zones are off.
Sent from my PACMAN MATRIX HD MAXX
Click to expand...
Click to collapse
Damn that sucks.
Any way to turn the touch on?
Sent from my MB886 using xda premium
Off as in where you push isn't where it registers it. Like top left equals bottom right bad.
Sent from my PACMAN MATRIX HD MAXX
dalbig said:
Any way to turn the touch on?
Sent from my MB886 using xda premium
Click to expand...
Click to collapse
No...it either needs a driver or proper calibration code...not sure which one...
Related
Hello,
Thanks to dhacker29, we have cm10.1 on locked boot loaders
Download
GAPPS
Broken:
Code:
Audio while calling
Wifi Hotspot
Signal bar
Camera
Note: I'm not responsible for your bricks, SO DON'T BLAME ME!!!
Cheers and Enjoy!!!
UPDATE March 27 2013:
here is an update. This should fix data. I can't test this right now, because I'm in school. (I recieved my replacement yesterday, so I'm back in the game!!!)
Attached.
Flash with safestrap after the main rom and gapps.
So it bricks phones?
sent from my JokerMATRIX HD MAXX
deeje00 said:
So it bricks phones?
sent from my JokerMATRIX HD MAXX
Click to expand...
Click to collapse
His phone was previously bricked.
I'll take the plunge and test this out when my lunch break is over
Sent from my phone.
Well let me know how it goes. I'm running cm 10 right now lol.
sent from my JokerMATRIX HD MAXX
Yep, I am waiting also. I still have not flash a single rom yet, and I am wanting this to be my first
awesome rom so far!
I took the plunge. It boots up and is smooth. I can't figure out how to get data working. The wifi works out of the box though. Anyone know how to get data working? I haven't tested it much, these are just my first observations.
http://forum.xda-developers.com/showthread.php?t=2165746
sent from my JokerMATRIX HD MAXX
So hyped right now, but kind of pissed... I was about to publish touchwiz 5, now I kinda have to integrate 4.2... But whatever, great rom! Thanks man! Now we can get some to port ubuntu!
Can not wait to get my replacement phone from AT&T now
I got data working, want me to pm you a link?
Maybachiswhereitsat said:
I got data working, want me to pm you a link?
Click to expand...
Click to collapse
Why don't you just post it?
Sent from my phone.
Yeah what he said. Why be secretive lol.
sent from my JokerMATRIX HD MAXX
deeje00 said:
Yeah what he said. Why be secretive lol.
sent from my JokerMATRIX HD MAXX
Click to expand...
Click to collapse
If you don't want the world to know, you can pm me the link too! Or you can just post it.
Sent from my DROID RAZR HD using xda premium
matt99017d said:
If you don't want the world to know, you can pm me the link too! Or you can just post it.
Sent from my DROID RAZR HD using xda premium
Click to expand...
Click to collapse
Had a few testers on Joker, one of which had data issues. I am wanting to see the fix on this also lol. Audio while calling is a pretty big issue also
Yea on 10 it's super quiet.
sent from my JokerMATRIX HD MAXX
To be honest I was actually about to sell this phone but with the possibility of stable 10.1 a little closer I may have to hold onto it. Plus I am making changes to Joker to better suite myself.
ROM devs are the key to lasting appeal. I can finaly try Ubuntu I'm trying to port it now.
Edit: needs unlock... ):
Sent from my DROID Atrix HD MAXX using xda app-developers app
niceee. been on the CM10 port since its been out. low audio in calling is a super big issue (gf calls alot)
progrockguy sent me a thread that could get LTE working and it works on the CM10 port so i wanna say it works on this too.
waiting for the audio part to be fixed before i flash.
http://forum.xda-developers.com/showthread.php?t=2165746 to get data
http://forum.xda-developers.com/showthread.php?t=1684711&page=27 if you get data and no LTE
Maybachiswhereitsat said:
ROM devs are the key to lasting appeal. I can finaly try Ubuntu I'm trying to port it now.
Sent from my DROID Atrix HD MAXX using xda app-developers app
Click to expand...
Click to collapse
Hey ckkiller, where's the Data fix?
I know all CM10.1 ROMs have GSM problems as of January 27th or something, I'm not sure if they have already implemented a fix.
Sent from my phone.
Yea dude where's the fix? You said you had it an hour ago and we hear nothing else? Wth man lol.
sent from my JokerMATRIX HD MAXX
So will galaxy s 3 roms run on this? There stats are almost identical.
Sent from my JokerMATRIX HD MAXX
deeje00 said:
So will galaxy s 3 roms run on this? There stats are almost identical.
Sent from my JokerMATRIX HD MAXX
Click to expand...
Click to collapse
No? Are you kidding me? You will brick.
Sent from my MB866 using xda app-developers app
Hey man Iono lol. I tried flashing one and it just sat at the m.
Sent from my JokerMATRIX HD MAXX
I had d same question in mind
Sent from my MB886 using xda app-developers app
Man you want all these cool features that Samsung added to their flagship phones right? If it's that your need I think you can flash in separately without having to install the full ROM.
More so the fact they have an official cm10.1 build.
Sent from my JokerMATRIX HD MAXX
If you want CM 10.1, either flash the unofficial build we have now, or wait.
The s3 is a very different device, with a different processor. The only devices that are "compatible" like that with the AHD are the Razr HD and associated devices. Like EcHoFiiVe said, this is a very good way to brick your phone.
But i thought that at&t gs3 has the same dualcore snapdragon s4 krait proccy
Sent from my MB886 using xda app-developers app
It does.
Sent from my JokerMATRIX HD MAXX
nevermind...derp post
It would be easy to port from...the AT&T one.
Well I tried porting and it boots but sticks at the m logo. I'm pretty new at that whole aspect of android though.
Sent from my JokerMATRIX HD MAXX
deeje00 said:
Well I tried porting and it boots but sticks at the m logo. I'm pretty new at that whole aspect of android though.
Sent from my JokerMATRIX HD MAXX
Click to expand...
Click to collapse
"it boots but sticks at the m logo"
Contradictory sentence. If it hangs at the boot logo, it didn't boot.
Sent from my Motorola Atrix HD using Xparent Green Tapatalk 2
Well I was meaning it turns on. It dosent go to the dead android or anything.
Sent from my JokerMATRIX HD MAXX
Why don't you try the sii? Epinters build prop says the host of his port is the sii, with his new fixes it works great.
I did the EB40 Mod on my Motorola Atrix HD and I noticed today that my battery was at 46% and all of a sudden it said 4% and that I needed to charge it. Does any mod or anyone know how to fix this problem I am extremely new to android and I would really appreciate any help I did manage to root my phone if that helps. Thank You :angel:
Need to get the battery to 0 and charge the phone to 100 with it off on the charger that came with the phone.
Sent from my PACMAN MATRIX HD MAXX
deeje00 said:
Need to get the battery to 0 and charge the phone to 100 with it off on the charger that came with the phone.
Sent from my PACMAN MATRIX HD MAXX
Click to expand...
Click to collapse
Ok just to be sure discharge the phone till it turns itself off and charge it while its off all the way till 100.
Yup exactly.
Sent from my PACMAN MATRIX HD MAXX
deeje00 said:
Yup exactly.
Sent from my PACMAN MATRIX HD MAXX
Click to expand...
Click to collapse
It finally turned off and it shows a battery at 7% just that is there a specific way to charge it?
Do I plug it in as im turning it off or simply how?
Just once it dies try to to turn it on to make sure its dead and if it won't turn on plug it in and leave the phone off till it says 100.
Sent from my PACMAN MATRIX HD MAXX
deeje00 said:
Just once it dies try to to turn it on to make sure its dead and if it won't turn on plug it in and leave the phone off till it says 100.
Sent from my PACMAN MATRIX HD MAXX
Click to expand...
Click to collapse
Have you ever gotten any overheating issues?
Its gotten a little warm a couple of times but only when I was backing up doing a wipe and installing a new rom.
Sent from my PACMAN MATRIX HD MAXX
deeje00 said:
Its gotten a little warm a couple of times but only when I was backing up doing a wipe and installing a new rom.
Sent from my PACMAN MATRIX HD MAXX
Click to expand...
Click to collapse
has your phone warned you that its overheating via a message displayed on screen?
Nope. Never seem that. And I have a otterbox defender on it.
Sent from my PACMAN MATRIX HD MAXX
deeje00 said:
Nope. Never seem that. And I have a otterbox defender on it.
Sent from my PACMAN MATRIX HD MAXX
Click to expand...
Click to collapse
the recalibration of the battery didnt work right... is there a special way or video I can see on how to do it exactly because i did it like you said.. also is there some kind of battery app or rom i can use?
deeje00 said:
Nope. Never seem that. And I have a otterbox defender on it.
Sent from my PACMAN MATRIX HD MAXX
Click to expand...
Click to collapse
the phone still doesnt calibrate the new battery, is there any other way or program that can help my phone is rooted if that help..thank you
https://play.google.com/store/apps/details?id=com.nema.batterycalibration
Sent from my PACMAN MATRIX HD MAXX
deeje00 said:
https://play.google.com/store/apps/details?id=com.nema.batterycalibration
Sent from my PACMAN MATRIX HD MAXX
Click to expand...
Click to collapse
Have you ever had any problems calibrating your battery? I still cant get it to work
Nope. Mines been working fine for 6 months and through dozens of rom flashes.
Sent from my PACMAN MATRIX HD MAXX
http://www.droid-life.com/2013/07/0...k-test-invites-for-droid-razr-hd-and-maxx-hd/
Maybe some new fodder for us?
N7... 'Nuff said...
http://android-gz.com
Yes! This might mean we could get our hands on a 4.2.x update!
Byakko Custom said:
Yes! This might mean we could get our hands on a 4.2.x update!
Click to expand...
Click to collapse
Too late! Thanks to custom ROMs we already did!
Sent from my MB886 using xda app-developers app
Byakko Custom said:
Yes! This might mean we could get our hands on a 4.2.x update!
Click to expand...
Click to collapse
Not 100%, but it seems to be just a 4.1.2 service update. Maybe a Blur update. I'm more intereseted if they're gonna release an updated kernel. That's what's gonna be interesting....
//off to scour sourceforge
I think this is maintainence update before 4.2.2
Sent from my XT890 using xda app-developers app
Checked, Moto released an "updated" RHD kernel...still at version 3.0.31...custom kernel is 3.0.85....
skeevydude said:
Checked, Moto released an "updated" RHD kernel...still at version 3.0.31...custom kernel is 3.0.85....
Click to expand...
Click to collapse
So is this good or bad?
Sent from my MB860 using xda app-developers app
chiikko561 said:
So is this good or bad?
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
Bad
Sent from my MB886 using xda app-developers app
EcHoFiiVe said:
Bad
Sent from my MB886 using xda app-developers app
Click to expand...
Click to collapse
Good thing we don't have to take it!
Stay away from stock and we'll be OK.
Sent from my MB886 using xda premium
4.2.2
If you are wanting this update with a good kernel just flash CM10.2. There should be a official coming out in the next couple of days or the nightlies are very good to.
EcHoFiiVe said:
Bad
Sent from my MB886 using xda app-developers app
Click to expand...
Click to collapse
Could you explain why it's bad? I don't know much about kernels.
Parham112 said:
Could you explain why it's bad? I don't know much about kernels.
Click to expand...
Click to collapse
Its bad cause we have .93 kernel already while stock lags behind at like .30 something, custom kernel>stock kernel
Sent from my MB886 using xda app-developers app
Parham112 said:
Could you explain why it's bad? I don't know much about kernels.
Click to expand...
Click to collapse
An older kernel isn't necessarily a bad thing, but those Soak Tests/OTA's tweaked the system enough to break the unlocked bootloader exploit. If you have a RAZR HD, don't update it. Have an Atrix HD??? Doesn't matter, Motorola completely dropped support for us so we'll never get an official Motorola/OEM/Carrier OTA ever again. Motorola dropped our support hoping we'd buy an X, the only thing they accomplished is making a lot of us not get a Motorola Phone on our next upgrade/purchase.
skeevydude said:
Tthose Soak Tests/OTA's tweaked the system enough to break the unlocked bootloader exploit. If you have a RAZR HD, don't update it. Have an Atrix HD??? Doesn't matter, Motorola completely dropped support for us so we'll never get an official Motorola/OEM/Carrier OTA ever again. Motorola dropped our support hoping we'd buy an X, the only thing they accomplished is making a lot of us not get a Motorola Phone on our next upgrade/purchase.
Click to expand...
Click to collapse
I added Moto to my list of companies to not buy products from.
If the galaxy s2's get officil 4.2.2 my next phone will be a Samsung.
Edit: I'm grateful for this official cm10.1 i'm using on my atrixhd... i started to hate stock and even holoblur couldn't keep me happy. I don't know if it's just me but it seems like after a day or two of usage stock roms start to lag, i found myself having to reboot my phone every 24-48hours.
skeevydude said:
An older kernel isn't necessarily a bad thing, but those Soak Tests/OTA's tweaked the system enough to break the unlocked bootloader exploit. If you have a RAZR HD, don't update it. Have an Atrix HD??? Doesn't matter, Motorola completely dropped support for us so we'll never get an official Motorola/OEM/Carrier OTA ever again. Motorola dropped our support hoping we'd buy an X, the only thing they accomplished is making a lot of us not get a Motorola Phone on our next upgrade/purchase.
Click to expand...
Click to collapse
Yeah definitely not smart on their part. They drop support on almost every phone after 1 or 2 updates. And every atrix people got screwed on. Especially people that traded in their old Motorola to get this one and then moto was like ha just kidding get bent. Buy this new 200 dollar on contract phone.
Sent from my PACMAN MATRIX HD MAXX
Are you absolutely sure Motorola has dropped support for the Atrix HD? I remember getting a maintenance update on my old Atrix 4G last spring after Motorola had announced that the Atrix 4G would not be getting ICS.
Sent from my MB886 using xda app-developers app
cool
Heard there was a leak for 4.3.
What are you guys thoughts on this? Lmk
Sent from my PACman Atrix HD using XDA Premium
No link or anything? Lol
Sent from my PACMAN MATRIX HD MAXX
Yep, leak for the S4. Apparently it features some new notification things that remember what your older notifications are after you've swiped them away. I forgot what else there was
Sent from my MB886 using xda app-developers app
deeje00 said:
No link or anything? Lol
Sent from my PACMAN MATRIX HD MAXX
Click to expand...
Click to collapse
Haha good point
here
http://androidcommunity.com/android-4-3-leaks-on-video-with-new-camera-ui-20130524/
http://www.phonearena.com/news/Andr...sung-Galaxy-S4-and-you-can-install-it_id44658
http://www.androidcentral.com/android-43-leaks-google-play-edition-galaxy-s4
Looks like it's mainly for Gs4 (who can blame them? That is one sexy phone)
Hate to say it, but on the surface is seems Google added in some CM features....Yeah, there's BT 4.0 support and bug fixes...Might as well be 4.2.2-1...I was hoping that 4.2>4.3 would be like 2.2>2.3.
4.3 looks more like a 4.2.3