Database Develop

[Q] APN Settings, where?

Where are the APN settings stored? I mean the file or whatever. Can I backup them?
Thanks.

They are not in the phone. You should add it manually. You can contact your network operator to configure it correctly or you can find the settings on your network operator web page.

y_n_t said:
They are not in the phone. You should add it manually. You can contact your network operator to configure it correctly or you can find the settings on your network operator web page.
Click to expand...
Click to collapse
Actually, they are In some database, or something...
You can backup and restore them using an app on the market ("APN backup and restore", or something like that, not using it personally...)

vlefevre86 said:
Actually, they are In some database, or something...
You can backup and restore them using an app on the market ("APN backup and restore", or something like that, not using it personally...)
Click to expand...
Click to collapse
But is more easier to add them manually.

y_n_t said:
But is more easier to add them manually.
Click to expand...
Click to collapse
Mine are set up automatically, I don't have to do anything

well, thx for that I will have a look in the market ... I thought they are stored in a file or whatever, on the phone.
cause I need to enter them after each flash
Edit: got the app --> http://www.appbrain.com/app/com.riteshsahu.APNBackupRestore

File with APN is stored on "apns-conf.xml" somewhere, i dont know exactly where, sdcard or root (cannot serch, charging my galaxy with power off, right now). I have same file from cyanogen firmware, but dont know prepare for our device, always have some error. This file have APN data almost from all world operators.
Best regards

miro666 said:
File with APN is stored on "apns-conf.xml" somewhere, i dont know exactly where, sdcard or root (cannot serch, charging my galaxy with power off, right now). I have same file from cyanogen firmware, but dont know prepare for our device, always have some error. This file have APN data almost from all world operators.
Best regards
Click to expand...
Click to collapse
yes I saw those APN of the other operators. after backing up with the app I looked into this .xml file which is generated by the app and I got 60 entries. but i see only mine in the settings pane on the phone, how come

That was me strange too. But i think, maybe when you etc. go in roaming or chnging SIM card from other operator, connecting with this other operator, we got other APN points in Settings panel. I was make this, and have APN , hanging from wich operater sim card is in my galaxy...(T-Mobile Croatia, VIPnet, and Tele2)
Regards

[Q] Missing intergrated SIP client in JVK

I just made the move from the CyanogenMod 7 that was OK and had all the Gingerbread features included including integrated SIP support that work perfectly with my VOIP.MS account. After reading what people in the forums were saying about JVK I made a move over to a custom JVK rom and found it much more stable and complete vs CM7. I would like to know if it’s possible to add back the features that Samsung removed from gingerbread like the integrated SIP client?

If you want to enable sip for jvk you can put the attached file in "system\etc\permissions\", then reboot phone and create accounts in settings/call settings.
Also, you can modify framework-res.apk to enable sip over 3g by editing "res\values\bools.xml" and setting "config_sip_wifi_only" to false. Good luck.

dfi2k5 said:
by editing "res\values\bools.xml"
Click to expand...
Click to collapse
No such file here, not even a "values" folder in "res". Did a find and grep search, still nothing.
SIP working on wi-fi ok.

fomofo said:
No such file here, not even a "values" folder in "res". Did a find and grep search, still nothing.
SIP working on wi-fi ok.
Click to expand...
Click to collapse
You have to decompile framework-res.apk using apk manager, then you'll find the xml you need to modify.
Sent from my GT-I9000 using Tapatalk

dfi2k5 said:
You have to decompile framework-res.apk using apk manager, then you'll find the xml you need to modify.
Click to expand...
Click to collapse
Doesn't it need to be signed?

fomofo said:
Doesn't it need to be signed?
Click to expand...
Click to collapse
apk manager does that for you. search this forum for more info. cheers.

dfi2k5 said:
If you want to enable sip for jvk you can put the attached file in "system\etc\permissions\", then reboot phone and create accounts in settings/call settings.
Also, you can modify framework-res.apk to enable sip over 3g by editing "res\values\bools.xml" and setting "config_sip_wifi_only" to false. Good luck.
Click to expand...
Click to collapse
thanks a lot.
does somebody have the same for jvh, as it also isn't integrated ?

doll00 said:
thanks a lot.
does somebody have the same for jvh, as it also isn't integrated ?
Click to expand...
Click to collapse
have seen few people adding this to their themes, roms - not as a single file tho. you can do it manualy if you can.

$omator said:
have seen few people adding this to their themes, roms - not as a single file tho. you can do it manualy if you can.
Click to expand...
Click to collapse
as I'm the beginner at Android could you kindly tell me how to add it manualy and where can I find the right file ?
thanks in advance.

can somebody help me in this problem as I can't find this single file ?

dfi2k5 said:
If you want to enable sip for jvk you can put the attached file in "system\etc\permissions\", then reboot phone and create accounts in settings/call settings.
Also, you can modify framework-res.apk to enable sip over 3g by editing "res\values\bools.xml" and setting "config_sip_wifi_only" to false. Good luck.
Click to expand...
Click to collapse
Could this work also with SGS2 (KE2)?

I installed it in my SGS with JVH and it didn't work

jarsiv said:
Could this work also with SGS2 (KE2)?
Click to expand...
Click to collapse
Yes, it should work. You should deodex your rom first, and modify framework-res.

Mhh, put in the missing xml file and voip is working on the SGS2.
My only problem is that callers are reporting very low speak volume from my side.
Does anybody know how to increase the microphone level a bit for this case?
Oh well, just mentioned that now Android phone app will crash after taking a voip call. Seems the implementation from sammy is buggy...
I am currently on KE2.
Dan

I've looked in the deassambled s2 Phone.apk and Samsung seems to has modified some details in the Phone app, but the main and the most part is there.
Just waiting for my S2 to check if these crashes are related with removing some piece of SIP relateing code from PhoneApp.java
dan3o3 said:
Mhh, put in the missing xml file and voip is working on the SGS2.
My only problem is that callers are reporting very low speak volume from my side.
Does anybody know how to increase the microphone level a bit for this case?
Oh well, just mentioned that now Android phone app will crash after taking a voip call. Seems the implementation from sammy is buggy...
I am currently on KE2.
Dan
Click to expand...
Click to collapse

how to copy into system folder?
dfi2k5 said:
If you want to enable sip for jvk you can put the attached file in "system\etc\permissions\", then reboot phone and create accounts in settings/call settings.
Also, you can modify framework-res.apk to enable sip over 3g by editing "res\values\bools.xml" and setting "config_sip_wifi_only" to false. Good luck.
Click to expand...
Click to collapse
I have tried, using the "File Expert" App to copy the file into \system\etc\permissions. but the problem is, it does not arrive in the folder. i guess it's because of the only read permissions for "permissions" folder.
so what's the way to copy a file into this folder? the device is rooted. (but i'm new with root on android...)

luxxxluxxx said:
I have tried, using the "File Expert" App to copy the file into \system\etc\permissions. but the problem is, it does not arrive in the folder. i guess it's because of the only read permissions for "permissions" folder.
so what's the way to copy a file into this folder? the device is rooted. (but i'm new with root on android...)
Click to expand...
Click to collapse
I don't use "File explorer" but "Root explorer" and on the right upper corner there is a button where you can change to read only or write and read.

doll00 said:
... but "Root explorer" ...
Click to expand...
Click to collapse
Ok, many thanks! Works for me.
But how can i do the second thing to make non wifi calls possible?
doll00 said:
Also, you can modify framework-res.apk to enable sip over 3g by editing "res\values\bools.xml" and setting "config_sip_wifi_only" to false.
Click to expand...
Click to collapse

luxxxluxxx said:
Ok, many thanks! Works for me.
But how can i do the second thing to make non wifi calls possible?
Click to expand...
Click to collapse
When I'm connected to WiFi and try to make a call, my cell phone simply ask me if I want to make cell phone call or internet call.
As I can remember, to activate this function you have to go to settings/call setting/internet call setting (this is the last option on the bottom) and than in "Use Internet calling" change to "Ask for each call"
so, you can modify framework-res.apk to enable sip over 3g by editing "res\values\bools.xml" and setting "config_sip_wifi_only" to false.
Click to expand...
Click to collapse
I believe you have to do exactly what is written above, but I tried to do it and It wasn't working over 3G

doll00 said:
I believe you have to do exactly what is written above, but I tried to do it and It wasn't working over 3G
Click to expand...
Click to collapse
Yes, calling using wifi works. But i also want to activate it in G3.
Sorry for asking so silly, but HOW can i do exactly what is written?
If i go to /system/framework/framework-res.apk in Root Explorer, and select it, i have only the chooice to "install" or "view" the package. No way to edit something inside the apk!
as an alternative attemp i have tried so simply copy an alternated version of framework-res.apk on it's place. but this ended still while copying in problematic messages and i needed to restore my phone from cwm backup... (the alternate version i took out of the first download link out of this post: http://forum.xda-developers.com/showpost.php?p=14584886&postcount=142)

[Q] I changed provider and the simtoolkit is not present

I have JB XXLPZ and changed provider today.
From the documentation from the provider I need to set things via the simtoolkit. I don't see the icon and can't find it anywhere?
Also I have the phone rooted and am running the TZ 3.5 kernel.
Any hints or tips?

Midnight Shadow said:
I have JB XXLPZ and changed provider today.
From the documentation from the provider I need to set things via the simtoolkit. I don't see the icon and can't find it anywhere?
Also I have the phone rooted and am running the TZ 3.5 kernel.
Any hints or tips?
Click to expand...
Click to collapse
Are u sure u dont see simtoolkit in my launcher. U can check app manager see simtoolkit. I think u need turn on and turn off airplane mode
Sent from my GT-I9070 using Tapatalk 2

Midnight Shadow said:
I have JB XXLPZ and changed provider today.
From the documentation from the provider I need to set things via the simtoolkit. I don't see the icon and can't find it anywhere?
Also I have the phone rooted and am running the TZ 3.5 kernel.
Any hints or tips?
Click to expand...
Click to collapse
Install SD Maid app, press left soft button and go to settings of that app. Check "Include system packeges?". Go back, then go to tab APPCONTROL. Refrash it, then search for stk. Press on it, and tap on Start application.

dungeonshard said:
Are u sure u dont see simtoolkit in my launcher. U can check app manager see simtoolkit. I think u need turn on and turn off airplane mode
Sent from my GT-I9070 using Tapatalk 2
Click to expand...
Click to collapse
Check 10 times and I'm not in airplane mode as I can call en be called. Only data requires some settings for this provider and must be setup via the simtoolkit as per their instuctions.

shut_down said:
Install SD Maid app, press left soft button and go to settings of that app. Check "Include system packeges?". Go back, then go to tab APPCONTROL. Refrash it, then search for stk. Press on it, and tap on Start application.
Click to expand...
Click to collapse
I installed it, but it doesn't show up in the list.
Also original rooted kernel didn't make a change.
When I use ES file-explorer and go to the /system/app folder I see a stk.apk and stk.odex
I was now able to install the stk, but it doesn't show up in the app drawer. Installed size is 0KB.

Midnight Shadow said:
I installed it, but it doesn't show up in the list.
Also original rooted kernel didn't make a change.
When I use ES file-explorer and go to the /system/app folder I see a stk.apk and stk.odex
I was now able to install the stk, but it doesn't show up in the app drawer. Installed size is 0KB.
Click to expand...
Click to collapse
Hmmm. Try to delete both. And wait me to upload deodexed file.
Edit: Try to delete both apk and odex file. And to push this file from attachemt to system/app. (not to install)

shut_down said:
Hmmm. Try to delete both. And wait me to upload deodexed file.
Edit: Try to delete both apk and odex file. And to push this file from attachemt to system/app. (not to install)
Click to expand...
Click to collapse
With sd-maid I'm now able to see the app, but when trying to start it gives a "Not possible!" message...

Midnight Shadow said:
With sd-maid I'm now able to see the app, but when trying to start it gives a "Not possible!" message...
Click to expand...
Click to collapse
Reboot. You pushed this file? And did remove previous apk and odex file of it?
P.S. If you really need that app to open do this:
1. Make backup in CWM.
2. Flash stock FW with Odin. And do factory reset. Or try with factory reset first, without flashing JB with Odin again, if that do not help, then flash FW.
3. Use app for your needs
4. Root phone again
5. Install TZ 3.5
6. Restore your backup.

shut_down said:
Reboot. You pushed this file? And did remove previous apk and odex file of it?
Click to expand...
Click to collapse
I removed the previous two files and copied the one you supplied in it's place.
Ran sd-mail and was able to find the stk app. Unable to run it though.
Then reboot.
After the reboot the sd-maid app was unable to find the stk application like the original ones.

Midnight Shadow said:
I removed the previous two files and copied the one you supplied in it's place.
Ran sd-mail and was able to find the stk app. Unable to run it though.
Then reboot.
After the reboot the sd-maid app was unable to find the stk application like the original ones.
Click to expand...
Click to collapse
Read my edited post. :angel:

shut_down said:
Read my edited post. :angel:
Click to expand...
Click to collapse
Ok. Will do that tomorrow.
For now I use the Wifi hotspot functionality from my company phone.
I need to do the following:
Choose Roaming services.
Choose Selecteer Mode.
Choose Manueel.
Choose International.
Simcard gets updated.
If you know any app that can do the following then I'm all ears
Thanks and I'll update tomorrow!

Midnight Shadow said:
Ok. Will do that tomorrow.
For now I use the Wifi hotspot functionality from my company phone.
I need to do the following:
Choose Roaming services.
Choose Selecteer Mode.
Choose Manueel.
Choose International.
Simcard gets updated.
If you know any app that can do the following then I'm all ears
Thanks and I'll update tomorrow!
Click to expand...
Click to collapse
Solved!
The provider said that my simcard didn't need to be changed because it was of the newer type. So the sim toolkit was not being able to run because it detected the newer type.
Then I explained that I still had no internet. She talked me throug all the settings and they were fiine. On their website there are numerous samples per phone on how to setup this manually.
Is seems that the settings defer for some phones. They told me I had to type "internet" in the access type section while it had to be "default" what I found out by checking the phone of my wife. She has the same provider.
After changing I had my dataconnection.
Thanks for thinking with me!

[Q] Need Droid 3 System apps!

Hey guys...
Im in a pickle...
I was being an idiot and I deleted some authenticator system apps... Now com.motorola.contacts etc. do not work...
I remember at one time there were some system apps that you can download and re-add in "apply update from sd card"
can anyone post them... or should I just reflash my SBF... or whatever its called now...
Thanks.

IMO the quickest method right now would be to backup all user data/apps via TiBu, then flash stock ROM (or whatever). I think there are links to a few on the ROM forums with all bloatware removed, which would be a good way to go...
nightwolf92 said:
Hey guys...
Im in a pickle...
I was being an idiot and I deleted some authenticator system apps... Now com.motorola.contacts etc. do not work...
I remember at one time there were some system apps that you can download and re-add in "apply update from sd card"
can anyone post them... or should I just reflash my SBF... or whatever its called now...
Thanks.
Click to expand...
Click to collapse

Newest noob
CGordini said:
IMO the quickest method right now would be to backup all user data/apps via TiBu, then flash stock ROM (or whatever). I think there are links to a few on the ROM forums with all bloatware removed, which would be a good way to go...
Click to expand...
Click to collapse
I removed some of the system files from my xt860 2.3.4 and can't seem to find a fix for it. It won't let me edit contacts at all. I did a factory reset through the recovery menu as well as a reset through the system menu. I downloaded the files that I removed (I think I got them all) and put them into the system/app folder. I changed the permissions to rw- r-- r-- and owner to uid using root explorer. I've been searching for fixes for this for days, but all of them on xda have links to downloads that don't exist anymore.
Please help.

lystrade said:
I removed some of the system files from my xt860 2.3.4 and can't seem to find a fix for it. It won't let me edit contacts at all. I did a factory reset through the recovery menu as well as a reset through the system menu. I downloaded the files that I removed (I think I got them all) and put them into the system/app folder. I changed the permissions to rw- r-- r-- and owner to uid using root explorer. I've been searching for fixes for this for days, but all of them on xda have links to downloads that don't exist anymore.
Please help.
Click to expand...
Click to collapse
Why not just sbf
sbf.droid-developers.org
Grab the appropriate zip file and find yourself RSDLite. Unzip the file and point RSDLite at the xml contained in the newly unzipped folder and presto chango, like new phone.
I'm not sure if they have 2.3.4 for xt860, but I'm not sure why you're still on 2.3.4 instead of 2.3.6
Sent from my XT860 using xda premium

Solved
Endoroid said:
Why not just sbf
sbf.droid-developers.org
Grab the appropriate zip file and find yourself RSDLite. Unzip the file and point RSDLite at the xml contained in the newly unzipped folder and presto chango, like new phone.
I'm not sure if they have 2.3.4 for xt860, but I'm not sure why you're still on 2.3.4 instead of 2.3.6
Sent from my XT860 using xda premium
Click to expand...
Click to collapse
I followed your instructions and am now at 2.3.6. I know that the way to thank you is with the button, but somehow it just doesn't seem enough.

lystrade said:
I followed your instructions and am now at 2.3.6. I know that the way to thank you is with the button, but somehow it just doesn't seem enough.
Click to expand...
Click to collapse
Excellent point sir, and also thank you for the info in case I break my phone again

That's what forums are for
Sent from my XT860 using xda premium

Samsung Account - Processing Failed when trying to login

I downloaded a stock N920C firmware from sammobile then i rooted it. The problem is when I try to login to my Samsung Account it tells me processing failed.
What I tried:
-updated samsung account app.
-cleared cache and data.
I searched for the problem in the forum but i couldn't find anything helpful
Thanks in advance.

hadymaher said:
I downloaded a stock N920C firmware from sammobile then i rooted it. The problem is when I try to login to my Samsung Account it tells me processing failed.
What I tried:
-updated samsung account app.
-cleared cache and data.
I searched for the problem in the forum but i couldn't find anything helpful
Thanks in advance.
Click to expand...
Click to collapse
You Will Get Your Answer In Below Dedicated Thread
https://forum.xda-developers.com/note5/general/fix-samsung-account-password-loop-t3575440

Exynox86 said:
You Will Get Your Answer In Below Dedicated Thread
https://forum.xda-developers.com/note5/general/fix-samsung-account-password-loop-t3575440
Click to expand...
Click to collapse
Thanks for your reply :good:
But i didn't find any solution for my problem there .. thanks anyway

hadymaher said:
Thanks for your reply :good:
But i didn't find any solution for my problem there .. thanks anyway
Click to expand...
Click to collapse
You Have Rooted Device Right?
1)Then use any root explorer like Es file exolorer or Root Explorer And Grant Root Permission And R/W (Read and Wright) Permission For Root Explorer
2)Now Download And Install Attached In Thread With Name Samsung Account As Normal Apk If Gives Error Then Push It Into System/priv-app/SamsungAccount
(Delete Old SamsungAccount.apk From Folder>Copy/Paste Downloaded One>Give Proper Permission To Apk Like rw- r-- r-- Octal Value Should be 0644>Reboot Device)
3)Now Follow the path in Root Explorer local/system/build.prop And Select build.prop to edit purpose
4)Find The Line ro.congif.timaversion=3.0
5)Edit the value from '3.0' to '0' And Reboot Device

Exynox86 said:
You Have Rooted Device Right?
1)Then use any root explorer like Es file exolorer or Root Explorer And Grant Root Permission And R/W (Read and Wright) Permission For Root Explorer
2)Now Download And Install Attached In Thread With Name Samsung Account As Normal Apk If Gives Error Then Push It Into System/priv-app/SamsungAccount
(Delete Old SamsungAccount.apk From Folder>Copy/Paste Downloaded One>Give Proper Permission To Apk Like rw- r-- r-- Octal Value Should be 0644>Reboot Device)
3)Now Follow the path in Root Explorer local/system/build.prop And Select build.prop to edit purpose
4)Find The Line ro.congif.timaversion=3.0
5)Edit the value from '3.0' to '0' And Reboot Device
Click to expand...
Click to collapse
I'm sorry but the problem still persists
Thanks for you efforts though

hadymaher said:
I'm sorry but the problem still persists
Thanks for you efforts though
Click to expand...
Click to collapse
Will You please post the screenshot of error if possible?

Exynox86 said:
Will You please post the screenshot of error if possible?
Click to expand...
Click to collapse
There you go

hadymaher said:
There you go
Click to expand...
Click to collapse
Try To Login Using Mobile Data Instead Of Wifi As Well As Try To Login With Another Samsung Account Instead Of Current One

Exynox86 said:
Try To Login Using Mobile Data Instead Of Wifi As Well As Try To Login With Another Samsung Account Instead Of Current One
Click to expand...
Click to collapse
Still the same issue..
Is there a way to disable the reactivation lock without logging in to the device? I think this is the problem

hadymaher said:
I downloaded a stock N920C firmware from sammobile then i rooted it. The problem is when I try to login to my Samsung Account it tells me processing failed.
What I tried:
-updated samsung account app.
-cleared cache and data.
I searched for the problem in the forum but i couldn't find anything helpful
Thanks in advance.
Click to expand...
Click to collapse
Try this-
1. download titanium backup
2. goto backup/restore tab
3. select Samsung account from the list of all apps
4. select wipe data
5. restart and try logging in now.

tucking fypo said:
Try this-
1. download titanium backup
2. goto backup/restore tab
3. select Samsung account from the list of all apps
4. select wipe data
5. restart and try logging in now.
Click to expand...
Click to collapse
Thanks for your reply but unfortunately it didn't work

hadymaher said:
Thanks for your reply but unfortunately it didn't work
Click to expand...
Click to collapse
you fix the problem? Are you the firs owner of the note 5?

yea i had this problem after rooted my phone non work with me but the only this worked for me to not login using samsung app all i did
i went to setting cloud and accounts ,accounts ,add account and add samsung account and it worked with me

you can always try a us sim card, worked for me,,,,,,,,

Well after mulling over this all weekend and going to a Samsung representative and calling Samsung on the phone my problem still persisted in not being able to login to my Samsung account...
So when I tried the first step of downloading titanium backup and wipe data and then went and wiped the cache ... login to my account became successful,,?
Thank you for the tip

---------- Post added at 11:59 PM ---------- Previous post was at 11:57 PM ----------
[/COLOR]Hi I have two Galaxy Note 5 one is rooted and one is not... The new one I factory reset and the older one is rooted can I smart switch the data without disrupting the rooted phone IE brick or soft brick

Can I root my note 9 on a Windows 7 PC operating system