Hey fellas
So after dwelling on the decision to upgrade from GB to something higher (ICS), I have decided to go for it.
Only except now that I'm trying to do it, it all seems to complicated.
Im using :
Model Number: GT-I9000
Firmware Version: 2.3.3
Baseband Version: I9000SRJV1
Kernal Version: [email protected] #2
Buid Number: GINGERBREAD.XWJVN
I've tried rooting via this one-click thing: z4root.1.3.0
But everytime I open it on my phone it says: 'There is a problem parsing the package'
So I have researched it, and apparently this does not work with XWJVN P.S. (Have no idea what that code means)
But I need to root first, which, is the hard part; hence needing some guidance on how to root this phone
Thankyou very much!
Hey there,
Before I begin, the five letter code, XWJVN is like the identification for the firmware you're using.
So I'll make this brief and hopefully simple enough to understand:
1.) Download a stock firmware from http://www.sammobile.com under the "Firmware" section (in the search bar under Firmware just type in I9000 and a whole list should come up). For simplicity of rooting, find XXJW4 (its dead easy to root).
2.) In the I9000 development section somewhere there's a thread about something called CF-Root. Scroll down the thread to the second to last post. There should be a link for XXJW4 CF-Root. Download it.
3.) Also download a version of Odin from these forums somewhere
3) Unzip both the stock 2.3.6 you downloaded and CF-Root.
4.) Make sure the phone has at least 60% battery or so (to be on the safe side). Turn the phone off, and put it into Download mode by holding down Volume Down, Home and Power simultaneously.
5.) Open Odin on your PC. Connect your phone to the computer via USB cable.
6.) Check that the phone has successfully connected (a yellow box saying ID:COM and a number should appear).
7.) Select PDA in Odin and navigate to the stock rom your downloaded (it should be in a .tar file). Select it and DON'T TOUCH ANYTHING ELSE. Press Start.
8.) Wait for it to flash in. Let 2.3.6 boot up.
9.) Repeat steps 4 to 7, but this time navigate to the CF-Root file (again, .tar). Again, don;t touch anything else except Start. Wait for it to finish.
And done! You should be rooted, ready to flash any ICS rom.
Sent from my GT-P7510 using Tapatalk HD
so long ur explanation mr soryuu, hope u got da thanks for it
i ll hit later da thanks button for u, my thanks usage today already at max.
n for OP, U need to read it real careful, n dont forget this, any inconvenient occur.........its ur own risk to bear, we here can juz giv explanation n guide, sumtime, it juz lady luck luv to ignoring u in this matter
Sent from my GT-I9000 using xda premium
compacity said:
so long ur explanation mr soryuu, hope u got da thanks for it
i ll hit later da thanks button for u, my thanks usage today already at max.
n for OP, U need to read it real careful, n dont forget this, any inconvenient occur.........its ur own risk to bear, we here can juz giv explanation n guide, sumtime, it juz lady luck luv to ignoring u in this matter
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
Cheers dude
And to @hawaiianmofo , please do read over that carefully because as you said yourself it ca be a tricky process if you don't know where to start (I tried following those guides as well, in the end I resorted to experimentation) and things can go wrong quite badly...
Sent from my GT-P7510 using Tapatalk HD
Soryuu said:
Hey there,
Before I begin, the five letter code, XWJVN is like the identification for the firmware you're using.
So I'll make this brief and hopefully simple enough to understand:
1.) Download a stock firmware from under the "Firmware" section (in the search bar under Firmware just type in I9000 and a whole list should come up). For simplicity of rooting, find XXJW4 (its dead easy to root).
2.) In the I9000 development section somewhere there's a thread about something called CF-Root. Scroll down the thread to the second to last post. There should be a link for XXJW4 CF-Root. Download it.
3.) Also download a version of Odin from these forums somewhere
3) Unzip both the stock 2.3.6 you downloaded and CF-Root.
4.) Make sure the phone has at least 60% battery or so (to be on the safe side). Turn the phone off, and put it into Download mode by holding down Volume Down, Home and Power simultaneously.
5.) Open Odin on your PC. Connect your phone to the computer via USB cable.
6.) Check that the phone has successfully connected (a yellow box saying ID:COM and a number should appear).
7.) Select PDA in Odin and navigate to the stock rom your downloaded (it should be in a .tar file). Select it and DON'T TOUCH ANYTHING ELSE. Press Start.
8.) Wait for it to flash in. Let 2.3.6 boot up.
9.) Repeat steps 4 to 7, but this time navigate to the CF-Root file (again, .tar). Again, don;t touch anything else except Start. Wait for it to finish.
And done! You should be rooted, ready to flash any ICS rom.
Sent from my GT-P7510 using Tapatalk HD
Click to expand...
Click to collapse
Thanks for the quick reply!
Not to be annoying, but is that SamsMobile thing, suppose to have UK as the description thing?
Also can't find this CF-Root thing. Could you link it to me here?
Thanks, (sorry)
hawaiianmofo said:
Thanks for the quick reply!
Not to be annoying, but is that SamsMobile thing, suppose to have UK as the description thing?
Also can't find this CF-Root thing. Could you link it to me here?
Thanks, (sorry)
Click to expand...
Click to collapse
Yup.
The firmwares are coded by region as well, so XXJW4 is localised for the UK.
As for CF-Root, give me a moment to find the thread again.
EDIT: http://forum.xda-developers.com/showthread.php?t=788108
(link fixed)
The CF-Root you're looking for is on the second to last post on the first page, it says "XXJW4 2.3.6" build or something like that.
Sent from my GT-P7510 using Tapatalk HD
Thanks! All good and working!
Now if I feel that I really don't like the ROM I have flashed, and would much rather revert back to GB. Could I just hook my phone back up to odin, and redo the steps you have laid out for me above? (i.e using the same thing I downloaded when I was flashing)
Thanks
hawaiianmofo said:
Now if I feel that I really don't like the ROM I have flashed, and would much rather revert back to GB.
Click to expand...
Click to collapse
Which ROM do you use, dude? And what is what you dislike?
Usually, yes, reverting should work fine by using again Odin 1.82 and flashing again the ROM you liked more. GB roms can be easily rooted by Semaphore kernel, which features CWM and if I remember well even root, all-in. Just find the version compatible with your ROM.
Did you try CM10.2? Works great for me.
hawaiianmofo said:
Thanks! All good and working!
Now if I feel that I really don't like the ROM I have flashed, and would much rather revert back to GB. Could I just hook my phone back up to odin, and redo the steps you have laid out for me above? (i.e using the same thing I downloaded when I was flashing)
Thanks
Click to expand...
Click to collapse
Yeah man, same steps, except don't flash CF-Root, and instead flash a file called dbsdata.rfs.tar (can be downloaded somewhere in these forums).
Really, after flashing the rom, all you have to do:
1.) The phone will display errors in red in the stock recovery saying it can't mount data, etc etc. Don't worry about it, its normal. Just take out the battery and put it back in.
2.) Get into Download mode, connect to the computer, open Odin. Same stuff as usual.
3.) Select PDA again and then navigate to dbsdata.rfs.tar and select it.
4.) Again, don't touch anything else. Just start it and let in flash.
Sent from my GT-P7510 using Tapatalk HD
tetakpatak said:
Which ROM do you use, dude? And what is what you dislike?
Usually, yes, reverting should work fine by using again Odin 1.82 and flashing again the ROM you liked more. GB roms can be easily rooted by Semaphore kernel, which features CWM and if I remember well even root, all-in. Just find the version compatible with your ROM.
Did you try CM10.2? Works great for me.
Click to expand...
Click to collapse
I was just under the impression that perhaps ICS would conserve more battery, not sure if it is?
The lock screen/unlock bit is kinda annoying with the buzz
The apps for Music are ugly and Gallery can't open GIFs, as opposed to the original ones I was using on GB.
What's CM10.2 like?
@Soryuu
I remember when I was flashing ICS I had to download gapps, do I need to do the same, or will those files get me through fine?
hawaiianmofo said:
I was just under the impression that perhaps ICS would conserve more battery, not sure if it is?
The lock screen/unlock bit is kinda annoying with the buzz
The apps for Music are ugly and Gallery can't open GIFs, as opposed to the original ones I was using on GB.
What's CM10.2 like?
@Soryuu
I remember when I was flashing ICS I had to download gapps, do I need to do the same, or will those files get me through fine?
Click to expand...
Click to collapse
ICS does conserve more battery, its true. JB has hardware acceleration which does make things either super smooth or pretty laggy, because it does take a hell of a toll on the processor.
Still, CM10.2 is a major improvement over some of the 4.2.2 roms I've tried. Its quite smooth, and I'd say worth a shot. GPS is (reportedly) better, so is battery (it is, at least on the builds I've tried), things are much smoother. There are a few things that need to be fixed though, but for the most part its brilliant.
And if you're flashing ICS only to get to Jelly Bean, you don't need gapps, you can just go straight ahead. You only need gapps if you plan on using ICS as a daily driver.
Sent from my GT-P7510 using Tapatalk HD
hawaiianmofo said:
I was just under the impression that perhaps ICS would conserve more battery, not sure if it is?
The lock screen/unlock bit is kinda annoying with the buzz
The apps for Music are ugly and Gallery can't open GIFs, as opposed to the original ones I was using on GB.
What's CM10.2 like?
Click to expand...
Click to collapse
For battery life people write different experiences....my own was:
ICS4.0x/cm9.1 good
JB4.2x/cm10.1x not so good
JB4.3/cm10.2 very good
I never used buzz, and of course it is matter of own taste
I love CM10.2,the ROM is still in development (it is a mirracle that developer pawitp still works on menawhile "old" i9000 and brings us android 4.3 where Samsung gave up with 2.3.6) I use nightly 20130828 and it works perfect on my i9000. Some other people report different bugs, though. So if you prefer to use only stable ROMs, wait until it gets at least RC
Soryuu said:
Hey there,
Before I begin, the five letter code, XWJVN is like the identification for the firmware you're using.
So I'll make this brief and hopefully simple enough to understand:
1.) Download a stock firmware from http://www.sammobile.com under the "Firmware" section (in the search bar under Firmware just type in I9000 and a whole list should come up). For simplicity of rooting, find XXJW4 (its dead easy to root).
2.) In the I9000 development section somewhere there's a thread about something called CF-Root. Scroll down the thread to the second to last post. There should be a link for XXJW4 CF-Root. Download it.
3.) Also download a version of Odin from these forums somewhere
3) Unzip both the stock 2.3.6 you downloaded and CF-Root.
4.) Make sure the phone has at least 60% battery or so (to be on the safe side). Turn the phone off, and put it into Download mode by holding down Volume Down, Home and Power simultaneously.
5.) Open Odin on your PC. Connect your phone to the computer via USB cable.
6.) Check that the phone has successfully connected (a yellow box saying ID:COM and a number should appear).
7.) Select PDA in Odin and navigate to the stock rom your downloaded (it should be in a .tar file). Select it and DON'T TOUCH ANYTHING ELSE. Press Start.
8.) Wait for it to flash in. Let 2.3.6 boot up.
9.) Repeat steps 4 to 7, but this time navigate to the CF-Root file (again, .tar). Again, don;t touch anything else except Start. Wait for it to finish.
And done! You should be rooted, ready to flash any ICS rom.
Sent from my GT-P7510 using Tapatalk HD
Click to expand...
Click to collapse
So now that im on ICS, say I'm not entirely loving it, could I go back to odin flash the bolded above, and be all good? Or would I need to download gapps specific to that 2.3.6 stock?
hawaiianmofo said:
So now that im on ICS, say I'm not entirely loving it, could I go back to odin flash the bolded above, and be all good? Or would I need to download gapps specific to that 2.3.6 stock?
Click to expand...
Click to collapse
The guide I sent you is the same up to step seven. Then just follow what I posted on the page before (below) and you're all set.
Soryuu said:
Yeah man, same steps, except don't flash CF-Root, and instead flash a file called dbsdata.rfs.tar (can be downloaded somewhere in these forums).
Really, after flashing the rom, all you have to do:
1.) The phone will display errors in red in the stock recovery saying it can't mount data, etc etc. Don't worry about it, its normal. Just take out the battery and put it back in.
2.) Get into Download mode, connect to the computer, open Odin. Same stuff as usual.
3.) Select PDA again and then navigate to dbsdata.rfs.tar and select it.
4.) Again, don't touch anything else. Just start it and let in flash.
Sent from my GT-P7510 using Tapatalk HD
Click to expand...
Click to collapse
Sent from my GT-P7510 using Tapatalk HD
Related
Please help!!! I have searched and searched and searched the forums and have come across so many threads on how to add a custom rom to your Captivate.
To start, what I have been trying to do is add a custom rom after upgrading my phone from ver 2.2 to 2.3.3 GB. Some posts say you can just upgrade with the 2.3 on the phone, other posts say you need to take the phone back to the stock 2.1 rom. Then you find posts that say, make sure you have the stock bootloaders and kernals when you downgrade to the stock 2.1.
You can easily see how even a somewhat above novice can get confussed. To take my phone back to 2.1 I have followed posts that say use Odin 1.3. I have used odin before so no big deal. However in this case again you are getting different opionions and versions on this. Some have just the odin .exe and others have the .exe and the MD5 and .ini it the package. I am assuming that the one with just the .exe has everything built in as the size is quite big.
I have tried both ways and after I "Flash" it will not finish with the normal recovery mode and see the linux script. It will go to the ATT window and just keep rebooting over and over. I then will use my JIG and get back in download mode in order to reflash back to 2.3.3 just to get the phone to work again.
Can someone please give me a clue as to what I am doing wrong or direct me to the proper files and maybe some better step by step instructions.
Thanks in advance for the help.
What Rom is currently on you phone? Which Bootloaders do you have installed?
Sent from my blazing fast Captivate running Continuum GB ROM using Tapatalk Pro
Rhiannon224 said:
What Rom is currently on you phone? Which Bootloaders do you have installed?
Sent from my blazing fast Captivate running Continuum GB ROM using Tapatalk Pro
Click to expand...
Click to collapse
Here is the info:
Firmware: 2.3.3
Baseband: I897UCKF1
Kernel: 2.6.35.7-I897UCKF1-CL273832
Build: GIGERBREAD.UCKF1
^ From the looks of what u posted, it looks like u have the leaked i897uckf1 currently on ur phone. If that is the case, then u could Odin the Cognition Beta 2 Kernel and then flash the latest Cog Rom (having already copied it to ur internal sd).
Just flash the kernel through Odin then use button combo (volume +/- and power...release after u see the at&t screen) to get into CWM 4.0.0.5 and flash Cog 5 v 1.00 from there.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
Are you plugging into a usb port in the back of your pc? Also, there are several methods for flashing back to stock now, once you upgrade to GB bootloaders you don’t ever want to use the Odin with the button fix because it will only flash the secondary bootloader and the primary bootloader will remain GB and the result will be a hardbrick. Also, some of the newer builds came with Froyo installed and using the older 1 click Odin by DesignGears will put those devices in a bootloop. So it really is dependent on your device and your needs. I now use the method outlined in the Continuum 6.1 thread which will not touch the bootloaders and brings you safely back to 2.1 stock. I always clear user data and cache in recovery, flash back to stock using Cezar's method (not a 1 click) prior to flashing a new Rom. Most devs recommend flashing to stock first because there is less chance of corruption.
Sent from my blazing fast Captivate running Continuum GB ROM using Tapatalk Pro
http://www.youtube.com/watch?v=UOyx5JQ_8_I
MobileTechVideos video is how i flashed my first gingerbread ROM. Its easy, straight forward and he has all the links you will need under the video.
piece-a-cake
Gupone said:
Please help!!! I have searched and searched and searched the forums and have come across so many threads on how to add a custom rom to your Captivate.
To start, what I have been trying to do is add a custom rom after upgrading my phone from ver 2.2 to 2.3.3 GB. Some posts say you can just upgrade with the 2.3 on the phone, other posts say you need to take the phone back to the stock 2.1 rom. Then you find posts that say, make sure you have the stock bootloaders and kernals when you downgrade to the stock 2.1.
You can easily see how even a somewhat above novice can get confussed. To take my phone back to 2.1 I have followed posts that say use Odin 1.3. I have used odin before so no big deal. However in this case again you are getting different opionions and versions on this. Some have just the odin .exe and others have the .exe and the MD5 and .ini it the package. I am assuming that the one with just the .exe has everything built in as the size is quite big.
I have tried both ways and after I "Flash" it will not finish with the normal recovery mode and see the linux script. It will go to the ATT window and just keep rebooting over and over. I then will use my JIG and get back in download mode in order to reflash back to 2.3.3 just to get the phone to work again.
Can someone please give me a clue as to what I am doing wrong or direct me to the proper files and maybe some better step by step instructions.
Thanks in advance for the help.
Click to expand...
Click to collapse
Listen, I'm new at this and learned watchin mobiletech videos from youtube. At first I found it hard but now is pretty easy (in my opinion). The first thin I do is back up apps with titanium and paste to my laptop (for me is faster to install them back), go back to stock 2.2, master reset using dialer (no odin), root, reboot, install rom on sd card, using odin i install bootloaders (I9000), flash talon kernel (odin), flash rom (CWM) and reboot. That's how I do it. Now, I could b wrong but doing it that way, in that pattern works for me. Like I said, I'm new at this but trust me....I've done it several times and it works for me. Keep reading and then decide how you want to do it. Good luck..."HONESTLY"!!!
It all depends on where you are now and where you want to go.
Sent from my SGH-I897 using XDA App
I'm new to all of this and have done a good amount of research but seems like the information never ends and there are a few ways to load a custom rom.
Method one
BACK UP!!!
Flash to stock (FTS)
Wait for your phone to reboot and then re-enable debugging
Hook phone back up to pc and Master Clear (MC) using Odin
Load Clockwork update.zip (DOWNLOAD)
Load FireFly_X-X.zip to phone memory
Remove sim and external SD, and unplug USB
Boot into recovery and reinstall packages (You may have to reinstall packages twice to get to Clockwork recovery)
Once in Clockwork recovery (Green Text), select install zip from SDcard
Next select choose zip from sdcard
Scroll down to FireFly_X-X.zip and select the file
This will run the script and install the ROM to your phone
After this is done, select go back and then select reboot phone
This may take a while, so leave your phone and go grab a snack!
Method 2
Load ROM file onto phone
Boot into recovery
Select ROM and flash it
Reboot, wait and enjoy
Wash, rinse, repeat!
What are the differences? Which one is better?
Seems like the first video is very simple and straight forward?
Am I missing something here? I'm already rooted and used titanium backup.
I'm on 2.2 Froyo and wanting to flash to Firefly 3.0
Thanks!
Hi,
I'm trying to upgrade my firmware through Kies, as I've just connected and it's alerted me that I am now able to upgrade to PDA:JVN / PHONE:JV1 / CSC:JV5(OPS). I am currently on PDA:JP5 / PHONE:JP3 / CSC:JP4(OPS), but when I click on the upgrade, it will pop up with a window that looks like it's downloading the firmware, but they disappears as quickly as it appeared, and my phone then needs to re-connect to kies...
This appears to be an infinite loop, without ever really getting anyway. My phone is rooted if that matters, and I don't think I have any lag fixes applied? I know I have applied lag fixes before, but I think I've since flashed with the stock 2.2 firmware, so there shouldn't be any lag fixes going on... :/..
Does anyone know what I'm doing wrong or how I can better debug this problem?
Thanks in advance
Denno
denno020 said:
Does anyone know what I'm doing wrong
Click to expand...
Click to collapse
Using Kies, may be
If you have the 3 buttons combo, prefer Odin...
Kies is Satan Tool, its a big cup of ....
if u want do upgrade use just and only ODIN
Thanks for the replies..
I would much prefer to use ODIN too, however I don't want to loose my installed apps and how I've got my home screens set up etc, so this is why I was trying to use Kies. I'm not familiar enough with ODIN to know if there is a way I can use it to upgrade without losing installed apps and home screen layouts etc??
Thanks
Denno
Well i think if u backup ur apps then u can save them otherwise i dnt think they remain on ur phone while using the odin is simple.
just go to www.samfirmware.com make an account and chk the firmware sec in toolbox and then select ur model and download the latest formware...JVR is the latest firmware on samfirmware download it and download odin extract that downloaded folder and u have 4 file 1 pit file 2 code 3 csc 4 modem.
Now open odin and put these file respectively ( dnt forget to close kies if u have even from running services on windows) now put ur phone in download mode and connect through odin and tick the repartition on leftside and then start odin...
Of all goes well u r on stock GB
wait phone to phone to boot
now choose any kernel to root ur phone and again turnoff ur phone and get in download mode and choose that kernel in pda option of odin and this time unchk the repartition and start odin
now ur rooted
Sent from my GT-I9000 using XDA App
thanks for the reply Ali Khalid... I'm looking on samfirmware, but I'm not able to find the Gingerbread firmware version for Australia? I downloaded I9000XWJVN ## under the 'America Australia Samsung I9000 Firmwares' heading, but that only had a tar file, with a heap of files I didn't recognize..
Any chance you could give me some more direct help? Like exactly which one I should download for Australia? Looking at the country letter code, which is DT for Aus, they only have firmwares for 2.1 and 2.2...
I'm really lost with this upgrading thing :/..
Can someone please help? I need to know which firmware I should download from samfirmware for an Australian I9000...
Thanks
denno020 said:
Can someone please help? I need to know which firmware I should download from samfirmware for an Australian I9000...
Thanks
Click to expand...
Click to collapse
Is there a specific reason you need Australian version? You can flash any firmware you wish.
Sent from my GT-I9000 using XDA App
There isn't a specific reason... I thought I would have to go with the Australian one to be sure that calls and stuff can connect to my phone through the network correctly? I'm completely lost with all this stuff to be honest...
If I don't have to get a specific Aussie one, which one should I download? As I mentioned earlier, I downloaded one called I9000XWJVN ## but it didn't have the pda files and pit files as expected.. they were all different things :/..
Im running JVS 2.3.5 (with JVR modem) I haven't bothered to flash an Australian/Optus csc but i guess you can if you wish. I did have to add APNs but that is no big deal.
After that you might want to flash a non-stock kernel for root, lagfix etc. I am running semaphore 1.7 and stock+ theming for extended power menu, %battery crt off etc.
Keep in mind if you are going down this route you will be voiding any warranty you have but ask anyone here it is worth it to make the most of your phone.
Do some reading around the forum and ask any questions you need so you know what you are doing.
Sent from my GT-I9000 using XDA App
Thankyou for your reply Mrlwik, but it's gone totally over my head. I really don't understand any of that.. I have flashed stuff to my phone before, but it was easy because I already had the 3 required files, and there was a step by step..
I guess I could just pop over to the custom roms sub-forum and download one from there and give it a go again..
Do I need to get a special modem or csc file or something to make sure it'll still work with Optus?
denno020 said:
Thankyou for your reply Mrlwik, but it's gone totally over my head. I really don't understand any of that.. I have flashed stuff to my phone before, but it was easy because I already had the 3 required files, and there was a step by step..
I guess I could just pop over to the custom roms sub-forum and download one from there and give it a go again..
Do I need to get a special modem or csc file or something to make sure it'll still work with Optus?
Click to expand...
Click to collapse
Sorry I was really confused once too, I will do my best to break it down a little.
You don't need a specific modem for Optus although different modems will give different results depending on your location regarding signal, 3g, gps and battery (due to signal strength) its quick and easy to change modem and this can be done anytime (through CWM recovery) without any data loss.
CSC is a bit different, although you can use a CSC that is different to your location/carrier it basically denotes any specific apps and APNs. CSC can be changed with odin but will factory reset you phone and you will lose data.
-APN details can be found with a quick Google search and can be added no problem through settings>wireless and network>mobile network>access point and as I don't care for carrier specific apps (apart from "my account" but the .apk for that easy to find) I haven't bothered to change it. Others do find it important.
I know the stock 2.3.5 JVS from samfirmware will contain the 3 files (code, modem, csc) and the .pit file for flashing because it is what i flashed.
Or alternitavely there are a few custom roms that can be flashed through odin regardless of what firmware and bootloaders you are currently running.
Some firmwares/ROM only have one file and it can be flashed under PDA. There are guides for flashing on samfirmware(for stock), here and video guides on YouTube. Always stick to the guide.
Decide what direction you want to take (stock with non-stock kernel or custom rom) and read up on some of the topics in the general section about flashing and/or any topics relating to any ROM you want to flash.
Once you know what you want to do with your phone it will mean much less reading for you and others will be able to help you more as you will know what questions to ask.
There is lots of info here, its just a matter of knowing what info you need and how to find it.
Hope that helped a little..
Sent from my GT-I9000 using XDA App
denno020 said:
Thanks for the replies..
I would much prefer to use ODIN too, however I don't want to loose my installed apps and how I've got my home screens set up etc, so this is why I was trying to use Kies. I'm not familiar enough with ODIN to know if there is a way I can use it to upgrade without losing installed apps and home screen layouts etc??
Thanks
Denno
Click to expand...
Click to collapse
If you phone is rooted download titanium backup and backup all apps before flashing, then install it again after flashing and restore only apps.
Wow thankyou so much for that breakdown Mrlwik! That does actually help a little! I'm going to find a stock firmware from samfirmware instead of a custom rom.. But it's great to know that I can swap modems to try and find the one that best suits my needs, as I do have problems with reception in my house, so maybe a new modem could fix that?
Anyways, thankyou again, and great effort and writing all of that with your phone! It definitely helped
Well I finally took the plunge and flashed my phone. I used the JVS firmware, which worked seamlessly. Then I wasn't sure if I were still rooted or not.. so I downloaded Dark Core (or something), and flashed that in PDA using ODIN. Then I was definitely sure I was rooted . Now I've just got to figure out a 'lag fix', my quadrant score at the moment is ~1400, but I reckon I can get much better, so I'll try some overclocking apps from the market I think, see which works best for me.
The most painful thing is restoring all my apps using Titanium Backup.. I have to click install for everyone of them, it doesn't automate it, which is so very annoying, but I'll get there eventually :/... lol
Thanks for all your help Mrlwik, very greatly appreciated
I had a similar problem with KIES in South Africa.
I don't use KIES any longer, it doesn't even have the "connect to internet" option.
Since you've rooted your device, I'm sure you have Clockworkmod flashed...if not, flash that using Odin. After that, you can flash any ROM, custom or stock, using clockworkmod recovery, then you don't require Odin again...just copy the ROM or apps you want to flash to your phone, boot into recovery, flash, and restart. Can't be easier than that.
ali_khalid5518 said:
Well i think if u backup ur apps then u can save them otherwise i dnt think they remain on ur phone while using the odin is simple.
just go to www.samfirmware.com make an account and chk the firmware sec in toolbox and then select ur model and download the latest formware...JVR is the latest firmware on samfirmware download it and download odin extract that downloaded folder and u have 4 file 1 pit file 2 code 3 csc 4 modem.
Now open odin and put these file respectively ( dnt forget to close kies if u have even from running services on windows) now put ur phone in download mode and connect through odin and tick the repartition on leftside and then start odin...
Of all goes well u r on stock GB
wait phone to phone to boot
now choose any kernel to root ur phone and again turnoff ur phone and get in download mode and choose that kernel in pda option of odin and this time unchk the repartition and start odin
now ur rooted
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
My question is, will this wipe out the device? I want to upgrade and keep my information and apps on my phone.
I just got my phone back in September. I had known about rooting for quite a while and was interested in doing it to my phone and trying out some custom ROMs.
However, everywhere I look there seems to be many different ways to root. Superoneclick, Odin, and others. I just want to know how to go about this and also if it is possible to go back to the stock Samsung ROM and unroot if I don't like it. The main ROM I am considering is Cyanogenmod 7.1 as they just added official support for my device, but if there are any other good ones, let me know.
Phone info (I have the Bell I9000M, but it's on Virgin Mobile):
Model #: GT-I9000M
Firmware version: 2.3.3
Baseband version: I9000UGKG3
Kernel version: 2.6.35.7-I9000UGKG3
[email protected] #2
Build number: GINGERBREAD.GKG3
Thanks for any help you can provide!
Read the stickies mate. All information that you seek is hidden in the stickies that you scrolled past to post your thread.....
I would NOT entertain attempting to flash cm7 until you know what you are doing.
You will get little sympathy for a thread such as "i've just tried to install cm7, now I've fxxked my phone and don't know what to do..... "
Get yourself odin and eclair jm9 from samfirmware.com - for when things go very wrong, then read, read, read.
Sent from my GT-I9000 using xda premium
I looked through the stickied topics as well as several other posts on sites such as Android Forums before making this post. The massive How-to guide in the stickied topics seems to be primarily about rooting on 2.1 or 2.2, and I am on 2.3.
I was simply confused about the different methods of how to root, and made this post for clarification. I may be new to this but I do know things from all the forum topics and guides I have read so far.
What I don't know is which method works best for my device, and what I should be using to root in the first place. I have looked into Superoneclick and know that it works for the I9000, but don't know if it could work for mine. I figured someone here could answer that.
All I'm asking for is a few answers to the questions I have. Thanks.
Sent from my GT-I9000M using XDA App
aaron_940 said:
I have looked into Superoneclick and know that it works for the I9000, but don't know if it could work for mine. I figured someone here could answer that.
Click to expand...
Click to collapse
To be honest, the i9000 and the i9000m are very similar devices. In fact, they're practically the same. For the most part, things that will work for the i9000 will work just fine for your device.
Definitely start with a custom samsung rom. Flash a custom kernel with odin, you have root. Super easy and almost idiot proof.
Back your **** up! Get titanium backup from the market and back up all your user apps. Take your time and do it right. Then go into recovery and do a backup from there.
Try a few roms out to get the feel for it. Unless your phone spews black smoke it is likely fixable. You will likely mess something up at some point, we all do at one time or another, but there are guides to walk you through getting back to square one.
Good luck.
Sent from my GT - I9000M running Tornado JVR Gold with Tornado kernel.
Any other tips or suggestions? I can't find any rooting guides that are specific to my device. How do I go about installing Cyanogenmod after I root?
Sent from my GT-I9000M using XDA App
aaron_940 said:
Any other tips or suggestions? I can't find any rooting guides that are specific to my device. How do I go about installing Cyanogenmod after I root?
Sent from my GT-I9000M using XDA App
Click to expand...
Click to collapse
Generally, if it works for the i9000, it will work for the i9000m.
upichie said:
Generally, if it works for the i9000, it will work for the i9000m.
Click to expand...
Click to collapse
Ok, thanks for clarifying that.
Sent from my GT-I9000M using XDA App
aaron_940 said:
Ok, thanks for clarifying that.
Sent from my GT-I9000M using XDA App
Click to expand...
Click to collapse
Yep, no problem. It's pretty confusing at first, especially since there are so many versions of the Samsung Galaxy S. The i9000 and the i9000m are quite similar; the Vibrant, Captivate, etc. are not. Feel free to use ROMs for the i9000 on your i9000m, unless it specifically says not to. But do not attempt to use anything for the other devices, such as flashing their firmware. That will just mess up your device. Oddly enough, when I got my i9000m, the box clearly said "Samsung Galaxy S Vibrant" on it—in multiple places. So without thinking, I flashed a Vibrant ROM onto my device. That gave me a whole lot of trouble and I couldn't figure out why. It wasn't until later that I realized the barcode sticker on the box had the model listed as "i9000m". Why they would do this, I have no idea. But I can see how things get confusing with all the different models.
Anways, good luck! And have fun flashing.
The Bell Vibrant (i9000m) is different than the T-Mobile Vibrant (which is also called the i9000m). That being said, the Bell Vibrant is compatible with almost all (if not all) of the International model's (i9000) firmware.
If you just want to root for now, I would recommend flashing Chainfire's kernal since it's close to the stock kernal and is a pretty good first step until you get the hang of this whole custom ROM stuff.
adslee said:
The Bell Vibrant (i9000m) is different than the T-Mobile Vibrant (which is also called the i9000m). That being said, the Bell Vibrant is compatible with almost all (if not all) of the International model's (i9000) firmware.
Click to expand...
Click to collapse
Jesus... all these phone names just get annoying, especially when there's 10 different variations for each phone.
upichie said:
Jesus... all these phone names just get annoying, especially when there's 10 different variations for each phone.
Click to expand...
Click to collapse
Yeah, that's what confused me in the first place :/
Sent from my GT-I9000M using XDA App
I have a Bell GT-I9000m that I've unlocked to use it on Rogers network.
At first, I did have problems. Didn't have a phone for a day, cause i installed an app called battery percentage something to my unrooted I9000m that soft bricked my phone. Then I really started getting into rooting. My warrenty was over and already using the phone with another wireless provider.
I still don't completely understand how all things works but I have got around. Tried many ROMs.
And I after using custom rom, I have installed previous stock rom(such as a previous froyo rom) then successfully able to update with Kies (only 1 time though, cannot remember which stock rom ive used). Anyways, it is possible to go back to exact stock state you've previsously had after installing a custom rom.
What i do:
1. Look for a custom rom that i like (such as CM7.1, darky rom, simplicity) in "Galaxy S I9000 Android Development" section. There should be a stick that has the list of ROMs or seperate posts with the latest ROMs. Download that ROM.
2. Read up on it. It will say which stock rom it is built from or say which stock rom you should install before installing the custom rom (i.e., 2.3.4jvr, 2.3.5jvt and such)
3. Find that stock rom. There are posts in the forum that says stock rom collection. Find the specified rom with Sbl(i.e., jvt, jvr)
4. Reboot ur phone into recovery mode (if u are coming from a stock rom, it will say 3e recovery). Do factory reset and clear cache (at this point, you should've backed up ur personal files already)
5. Reboot into Download mode(hold Home+volume down+power as you turn on the device). Run "Odin" on ur PC. If you unzip the stock rom file, it should contain 3 different files PDA, Phone, CSC.(Do not much understand this part, just following instruction. From what I understand PDA is like the OS?(like Windows?), Phone is the modem for like dialing, 3G connections and such? and CSC? no idea)
6. Put those 3 files accordingly into the odin and put "s1_odin_2010512.pit" file into the "PIT" section.(when you do this "Re-Partition" would automatically get cheched. Leave it as it is checked)
7. Connect your "I9000m" device with USB. PC will recognize your device. Click "Start". It will start doing stuff to your phone.
8. Find the Kernel that will root your device. Go to "Galaxy S I9000 Android Development". There's a sticky called "SGS - 2.3.4 Ginger Bread Custom Roms & Kernels). Scroll down and you will see the list of Kernels (i.e., CF-Root, Semaphore, Blockbuster and such. so far, I've only tried CF and semaphore, which worked fine for me). Click on one of them and find the one that matches the stock rom that you've install(stock jvr -> CF-Root-XX-OXA-JVR). Download that and unzip it.
9. Reboot your phone into Download moad again(hold Home+volume down+power as you turn on the device). Open "Odin" agian. This time only load the ".tar" file that was contained the Kernel that you've downloaded, nothing else. Connect your phone. Click on "Start". This will also do stuff to your phone. Again reboot into the "Recovery Mode". Do "Factory Reset" and "Clear Cache"
10. After Rebooting you will have "Superuser" app installed on your phone, if not download it from the marekt. Now, you are rooted.
11. For Semaphore and CF-Root, there's CWM or semaphore app, that let's me to reboot into CWM recovery mode (not the original 3e recovery).
12. Boot your phone Normally and Copy the Cumtom ROM file(.zip) onto your phone(has to be in the "internal SD", your "external SD" is not recognized in the recovery mode).
13. Boot into CWM recovery mode.
14. Go down using "volume down" button to "install zip from sdcard". Press "power" to select.
15. Again use "volume down" to "choose zip from sdcard". Press "Power" to select.
16. You will see the custom ROM file(.zip). Go down to the .zip file (i.e., "Simply_Honey_5.1_LightCWM.zip"). Press "Power". This will start doing stuff to your phone for awhile and boot after will take awhile as well.
17. Once you are successfully boot into the phone, it will ask you to set-up stuff(wifi, google account). Do all that. Now you are basically done.
18. My extra step. Reboot into "Download mode". Download the Stock "UGKG3" rom. Unzip it. Open "Odin". Load only "Phone" file into the odin from "UGKG3" ROM. Then click "Start"
*If you are gonna attempt to follow my steps, "DO IT OWN YOUR OWN RISK"
But from my experience, it is pretty safe procedure and you could go back to Samsung Stock state.
I've went through a lot of ROMs in a very short period of time. Had ROMs with random Reboot problem, roboot problem when playing games and cell signal pick-up problem. From my experience so far, ran into some bad lucks with the signal problem with the most recent JVT rom, even with stock. JVR was okay with the signal, but I flash the phone with "UGKG3" modem. Not entirely sure does it does affect the phone, just feel like doing it since it's for specifically i9000m. LOL.
Like the other guy said. If it works for I9000, it will most-likely work for I9000m.
Currently on "Simply Honey 5.1" 2.3.4jvs
Sent from my GT-I9000m using XDA App
Hi, sorry to resurrect a dead thread but I have a question.
I decided to try rooting my phone a while back with SuperOneClick, and it worked. However, I'm not sure what to do here with regards to ROM Manager. Would it work if I tried to flash ClockworkMod Recovery through it, and then flash CyanogenMod?
I wish all this wasn't so confusing.
Check here to find out what to do with the ROM Manager:
http://wiki.cyanogenmod.com/wiki/Samsung_Galaxy_S:_Full_Update_Guide
It should be near the bottom of the page
Edit: Oops, sorry missed some later threads. Disregard post.
To anyone that can point me in the right direction....
Just got my note this morning - itching to get it rooted...ive had a fair few phones in the past (just coming from a sensation) which i rooted and reflashed nearly every week. used to have a galaxy tab which i also rooted etc etc so im ok with odin, adb etc etc.....the only problem i have is where to start - theres a million roms to choose from and im not sure where to go
my kernel is 2.6.35.7-N7000XXLA6-CL907341
baseband is N7000XXLA4
Can anyone point me in the right direction for the tools that i need access to...
thanks to anyone that can help
Comfy
I can see that mine isnt directly rootable and know that ive got to go to an older rom but which one??
You can have any older ROM, listed here
http://forum.xda-developers.com/showthread.php?t=1424997
select any from directly rootable ROM, I am suggesting this one
N7000XXKL3 ------ 2.3.6 2011 December-------- N7000ODDKL1 --------------------India
as this is non wipe N rootable, you won't lose data.
Alternately, select from 4th line of my signature, which is modified pre rooted ROM
Well, first and foremost thanks for replying so fast! it'd be nice to get this flashed as soon as possible -ive got no data to keep as its new to me so ive got yours downloading now (take about another hour from what i can see) - so, once ive got your rom is it just a case of using oding to upload it (its a while since ive had a tab) so im a bit rusty.....+ i take it the next step is CWM?? is that right??
sorry - all the questions - obviously im downloading your interim rom to get it rooted - whats the best ics rom at the moment....?
ComfySofa said:
sorry - all the questions - obviously im downloading your interim rom to get it rooted - whats the best ics rom at the moment....?
Click to expand...
Click to collapse
There is no best rom as they all differ. I'd suggest Imilka's AOSP rom ( if you like AOSP that is ). It's fast, clean and stable.
ComfySofa said:
- so, once ive got your rom is it just a case of using oding to upload it (its a while since ive had a tab) so im a bit rusty.....+ i take it the next step is CWM?? is that right??
Click to expand...
Click to collapse
yes, just use PC odin to flash ROM, if you have any query, refer to post #2 of thread, i have mention in previous msg.
yeah, next is to get CWM
And, finally you can update to latest ROM by using CWM to keep root intact.
ComfySofa said:
sorry - all the questions - obviously im downloading your interim rom to get it rooted - whats the best ics rom at the moment....?
Click to expand...
Click to collapse
Sorry, I can't help in this matter much, as I have never used any custom ROM.
??????????
What is "not directly rootable"? You can flash CF/Speedmod/Franco/Abyss kernel over any stock rom to get root. You are anyways asking to downgrade ROM using PC ODIN which is going to increase the counter. Why not flash only one of these kernels using PC ODIN?
From the Moderator,
Please clarify your statement. It is not entirely accurate. The Phone needs to be unlocked 1st before any rooting can occur. Secondly, Not All kernels will provide rooting, UNLESS they are written and configured to do so.
People's knowledge level in XDA are from total noob to expert, so it is highly advisable to provide more succinct complete postings e.g. do A then B then etc. That way, people do not misunderstand your posting.
~~ oka1
watsa said:
What is "not directly rootable"? You can flash CF/Speedmod/Franco/Abyss kernel over any stock rom to get root. You are anyways asking to downgrade ROM using PC ODIN which is going to increase the counter. Why not flash only one of these kernels using PC ODIN?
Click to expand...
Click to collapse
Since how long you are on N7000 forum? looking you are since long on XDA (just seen U R developer)
May i have not uttered more thn three four words, if it was stated by newbie.
When you are 'recognized developer' it puts lot weight on every word you spoke. Hope you can consider to review again your advise.
Can you confirm once again to your statement?
Flash stock ROM using PC odin raise counter?
Flashing CF/Franco/Abyss with PC odin, won't raise counter?
I do believe, your statement is completely wrong. PC odin never raise counter, if you flash STOCK ROM. But any custom Kernel you have described, if flashed with PC Odin will certainly raise counter. Though you are recognized developer, but seems you are new to N7000 develpment.
I havent gone anywhere - still havent got your rooted file - im about 70% of the way there - this has got to be the slowest download ever!!
At last - ive got your rooted file - just extracted it and theres just one file in there - i thought with odin you had individual files....how do i load this one on....
watsa said:
What is "not directly rootable"? You can flash CF/Speedmod/Franco/Abyss kernel over any stock rom to get root. You are anyways asking to downgrade ROM using PC ODIN which is going to increase the counter. Why not flash only one of these kernels using PC ODIN?
Click to expand...
Click to collapse
You're 100% wrong. PC Odin won't raise the binary counter as long as it's a stock ROM. The OP needs to flash an older stock ROM so he can root and then do whatever he wants to do. The binary counter will get raised if he flashes a custom ROM with PC Odin.
PC Odin: Stock ROM's
Mobile Odin and CWM: Stock and custom ROM's
ok - i got there in the end - Firstly i like to thank Dr.Ketan for pointing me in the right direction.....i have a few post-type questions.....
i flashed the rom you suggested (the one that was already rooted) - while it went on ok - while it was in that state i lost the ability to use the keyboard - when i type anything in the key would flash up but the it came up with "null" everytime i hit a key...not too much of a problem as it was only a temporary rom.
Also when i flashed the ics rom you suggested - imilka - it flashed.....then at the boot screen it kept freezing (at the boot animation) - i popped the battery a few times and then it eventually started.....and its been fine since....anyone else ever had that/is that the norm...?
Finally - obviously ive removed the stock rom and im now on ics....is there a way i can download all of the stylus apps and put them back in (one of the reasons i bought a note was to use the stylus - bit gimmicky but it would be nice to mess around with it)
Also - i had to install clockwork mod from the market (i have a paid app version of it) - to actually get into clockwork mod....how to i get to cwm from a cold boot - i read that you had to hold down the vol up and down and hit the power - mine just boots - unless im doing something wrong but, when its fully booted i can go to cwm and restart from there and i can go in.....
Sorry about all the questions but, its a great phone, just want to start messing around with it...new toy!
Thanks again for pointing me in the right direction.
Comfy
Keyboard null issue is common, that usually manage by flashing other rom or with flashing csc, but you have manage it so nothing to discuss.
booting error is routinely termed as bootloop, also common,particularly switching between gb n ics rom. Usually it solved with wipe cache n wipe data.
Sorry abt stylus appl, i have no expirence of ics, as i never installed any custom rom.(n it was not me suggested ics b'coz m noob for custom rom)
Market version of cwm is totally different n won't work on note.
there is custom kernel for note, which having same functiin like cwm.
Sent from my GT-N7000 using xda premium
Please see post 3 for the 'worse' update
-------
Hello,
Just a bit of background - have had my galaxy I-9000 for 1-2 years now, had been running dramatically slow, so upgraded it to 2.3.6 (GINGERBREAD.XWJW6) & it runs a lot faster. Unfortunately, it has many more "optus apps" which I detest.
I'm looking to "reboot" the phone - which from reading some threads means "rooting" the phone. My questions relating to this are:
1. If I 'root' the phone, will my contacts/messages be retained, or is it a complete wipe of the phone
2. How exactly do I 'root' the phone? Is there a thread that shows you (I've seen threads, but they are technical, & I become confused when they start mentioning roms etc)
Furthermore, as far as I've read, after you 'root' your phone, you have to install a ROM, for example "SLIM ICS" (what's ICS stand for?)
I've also read, but I'm not sure that because the firmware I've upgraded to is relatively new - that 'rooting' is not yet available? Is this also true?
Thanks for your help =)
1. Rooting doesn't wipe anything. Maybe cache or/and dalvik cache uf you flash with cwm.
2. Look for cf-root kernel thread.
There is a step-by-step guide and the needed rooted kernels.
You will need, Odin, the kernel.tar file and the phones Downloadmode (volume down + home + power)
Sent from my GT-I9000 using xda app-developers app
Hello again,
Well my phone seems to have shat itself? It comes up with the "black screen of death," but I have been able to get to the downloadable screen.
I wanted to know how to recover it, I am no tech wizard, but this is the stuff I have:
- ODIN v1.85
Please tell me what else I need, I'm guessing a ROM?
I will be forever grateful, thanks
if you have the download mode, you have to flash properly the GB JVU, then to flash the CF root for JVU to become root and have access to CWM. then you can upgread to ICS
---------- Post added at 11:12 AM ---------- Previous post was at 11:08 AM ----------
here the link for jvu
http://www.theandroidsoul.com/xxjvu/
good luck
Thank you!
I'm following it step by step (downloading the XJVU 200meg file at the moment)
I will let you know about my progress
you need the three files, for phone, pda and csc. And you also need the pit file, and the cf_root file.
So an update!!!
Black screen of death, diverted!!! (phew)
Flashed to 2.3.6 XXJVU
Rooted it as well
Now looking for a ROM to put in...
Now because I'm on 2.3.6, does that mean I can only get the "SURFACE" ROM? What's the advantage of changing ROMS anyway?
Cheers
Tholius said:
So an update!!!
Black screen of death, diverted!!! (phew)
Flashed to 2.3.6 XXJVU
Rooted it as well
Now looking for a ROM to put in...
Now because I'm on 2.3.6, does that mean I can only get the "SURFACE" ROM? What's the advantage of changing ROMS anyway?
Cheers
Click to expand...
Click to collapse
hmm.. now u flash JW4.. coz it is better than JVU in battery life and smoothness..
and then u shud get CM9 latest nightly.. though m not on it...
but i tried it.. it's very smooth...
u can also try DOC's ICS ROM (currently i am on)..
If my post helped, don't mind hitting THANKS
Tholius said:
So an update!!!
Black screen of death, diverted!!! (phew)
Flashed to 2.3.6 XXJVU
Rooted it as well
Now looking for a ROM to put in...
Now because I'm on 2.3.6, does that mean I can only get the "SURFACE" ROM? What's the advantage of changing ROMS anyway?
Cheers
Click to expand...
Click to collapse
If you want to flash slim just go to slim website, and follow the instructions, take your time, and make sure you read and follow the instructions, any problems then post on the slim thread, I will keep an eye out for you
I'm glad for you thiolus. Cm9 or slim are good. I'm on cna by franzy and i think it's a very good rom on ics
Another update guys!
Well I flashed it, then rooted it (see now I'm using proper lingo =P) XXJVU
Then finally put on CM7 which makes everything faster, for now I think it is okay, although I think I will update it later as I want more whizzbang!
Another problem I encountered was getting all the contacts, kies saved as SPD file which wasn't recognised - had to save it as VCR/vcard file, then merge all of it together into one file - I learned how to use DOS too!
So literally 8 hours later (slept at 430 am, now its 730 =P) this is it for now, thanks everyone for helping so much
Can't post link: i46.tinypic.com/24f03gl.png
i didnt get you how to root my phone with xwjw6 firmware only,i dont want to change my firmware to xxjvu now
ksh15 said:
i didnt get you how to root my phone with xwjw6 firmware only,i dont want to change my firmware to xxjvu now
Click to expand...
Click to collapse
flash a rooting kernel, either CF Root JW6 or semaphore GB from My Android Collections