Related
please tell me how to enable usb on the go . i want to attached my pen drive and my hard drive to my phone .
plug it into the phone, and u're ready to go.. hence the name usb on the go
jinnn_1989 said:
please tell me how to enable usb on the go . i want to attached my pen drive and my hard drive to my phone .
Click to expand...
Click to collapse
You need a USB Host to go cable - they are pretty cheap off of ebay.
USB hard drives don't always work - at minimum you will need a powered hub.
- Frank
i know wht USB on the means but how do i enable it. i have tried connecting with a pendrive with the help of the USb on the cable but it does not show .
Once you plug your on the cable in the phone will inform you that usb connecter s connected. Whatever you plug in at the other end of otg cable work run unless it is not supported.
Sent from my SCH-I500 using Tapatalk
Just plug it in and look in My files. It will show as usbstorage.
I have an official samsung OTG cable, it works fine on the SGS2, but doesn't appear on the Galaxy Note under usbstorage.
Anyone else out there having similar problems?
i had grab some ebay OtG but after unmount and remove the OTG it causes wakelock which drain alot of juice.
I am also facing problems with OTG . when i plug in the cable thr is not msg nor anything happens in phone. please could any one tell me how to enable it may be with kernel or custom rom or may be anything else.
I also want to know this as well,I have spent considerable time yesterday trying to make this work but no luck at all,I would appreciate if someone could help,as I have seen a video in this forum where the guy was able to.connect a mouse to it stating that it is supported out of the box.
I was able to get it to work with a pendrive and a mouse with no problems, but I couldn't get a keyboard or my 2.5" external drive to mount.
Details:
My OTG cable was from DealExtreme for $2.30 or something.
My pendrive was FAT32 formatted.
My mouse was a basic $10 optical one.
My 2.5" external was NTFS, which probably goes some way to explaining why it didn't work even when I gave it some extra power from my desktop PC too.
My keyboard was a standard USB. I also tried a Logitech keyboard with a wireless USB dongle but that didn't work either.
I watched a whole film off my pendrive with no issues. I messed around with the mouse a bit, but the cursor moved too slowly for my taste and the scroll wheel didn't scroll webpages, which is half the reason I'd plug a mouse in anyway.
jinnn_1989 said:
I am also facing problems with OTG . when i plug in the cable thr is not msg nor anything happens in phone. please could any one tell me how to enable it may be with kernel or custom rom or may be anything else.
Click to expand...
Click to collapse
If you get no message when the cable is plugged in on it's own, chances are it is a problem with the cable. I bought a cable of Ebay which didn't work, so I bought a different one and that did.
Regards,
Dave
I've tried this with three USB keyboard so far: I plug them in to my Note via the OTG cable, the notification bar identifies them as keyboards, but I can't get any application to accept text input from them.
My latest one is a folding Geyes keyboard which is too cool to sell, so I'd really like to get it working. Any ideas on what's going wrong?
Even am facing same problem here, able to connect mouse and USB Drives. but not able to use Keyboards.
Is the same when you unplug and plug again otg cable?
hpchiu said:
Is the same when you unplug and plug again otg cable?
Click to expand...
Click to collapse
Ya.. got same message saying "Keyboard Connected"
but doesn't work
hpchiu said:
Is the same when you unplug and plug again otg cable?
Click to expand...
Click to collapse
Yep, same.
(And I know my new keyboard works because I'm using it to type this answer on my PC...)
The same problem here, but it works with wireless USB keyboards.
Not Bluetooth, that ones with proprietary dongles. I thought it's some sort of a power problem and the wireless dongles need less power.
So i stripped a USB extension cable, cut the power lines and inserted another usb cable. Like an Y-Adapter used for 2.5" hard drives. This additional plug was put in the Charger and it powered the keyboard. Still no luck.
The cable itself works. Tested it with a mouse, a card-reader and even a 2.5" hard disk and the Note was happy with it.
/me:
Edit: Tried to change the keyboard layout. I need qwertz, not qwerty. Not possible at all. Seems that Android 2.3.6 has no option for that. Hope ICS will do better. Even other keyboard will work, it's absolutely useless for me.
So, no one figuret out why USB keyboards don't work?
My USB Keyboard can't work too
My keyboard is samsung AA-SK0TKBD
solution is easy
You have to restart mobile. Yes, really not practical but that works.
One more thing, the captcha verification during each post is really annoying. Last my answer here.
Shadow69 said:
So, no one figuret out why USB keyboards don't work?
Click to expand...
Click to collapse
I read somwehere that we need to go to USB settings & enable USB Host option. Then USB KB starts working. I am also having a USB KB but am unable to find this USB host option. SO if someone gets this option, pl tell me steps to go there on my Galaxy Note
Thanks
clive48 said:
I read somwehere that we need to go to USB settings & enable USB Host option. Then USB KB starts working. I am also having a USB KB but am unable to find this USB host option. SO if someone gets this option, pl tell me steps to go there on my Galaxy Note
Thanks
Click to expand...
Click to collapse
i have never used any of this...
i just connected the usb keyboard and it detected as keyboard and works fine as well
Same here. Just plugged in a normal Dell (Logitech) USB Keyboard and it worked without have me tweak any settings. Same with a wired and wireless mouse. It just worked.
So I'm currently running Carbon ROM B6 on my Nook HD+. I was hoping to connect a keyboard via USB to the Nook HD+. In order to do that, I figure I'd have to get a female to female USB adapter, and plug in the keyboard on one side, and the Nook in the other. Before I buy a female to female USB adapter, I figured I'd ask if this would even work. To take it one step further, could this work with any USB device at all, such as a mouse, flash drive, PC Xbox controller, etc?
It works on CM10. I am not sure if Carbon has that feature but USB adapter is only a couple of dollars.
Sent from my Galaxy Nexus using xda app-developers app
And the answer is?
RySean said:
So I'm currently running Carbon ROM B6 on my Nook HD+. I was hoping to connect a keyboard via USB to the Nook HD+. In order to do that, I figure I'd have to get a female to female USB adapter, and plug in the keyboard on one side, and the Nook in the other. Before I buy a female to female USB adapter, I figured I'd ask if this would even work. To take it one step further, could this work with any USB device at all, such as a mouse, flash drive, PC Xbox controller, etc?
Click to expand...
Click to collapse
SOOoo, did this work? Was a long time ago, was wondering if anything came of the attempt. MANY would like to know. Thanks!
Hoverbored said:
SOOoo, did this work? Was a long time ago, was wondering if anything came of the attempt. MANY would like to know. Thanks!
Click to expand...
Click to collapse
Yup, worked fine. I tested a keyboard and a mouse and both worked perfectly. I also tested an external HDD (Seagate Backup Plus) and was able to get that working with USB host mode turned on.
RySean said:
Yup, worked fine. I tested a keyboard and a mouse and both worked perfectly. I also tested an external HDD (Seagate Backup Plus) and was able to get that working with USB host mode turned on.
Click to expand...
Click to collapse
Did you manage to get the 360 controller to work?
Thanks
gotbass said:
Did you manage to get the 360 controller to work?
Thanks
Click to expand...
Click to collapse
For the Xbox Controllers you should be able to use the normal xpad kernel module, I will test that when my USB genderchanger arrives
Jann F said:
For the Xbox Controllers you should be able to use the normal xpad kernel module, I will test that when my USB genderchanger arrives
Click to expand...
Click to collapse
okay let me know how it works! very interested in doing that =)
gotbass said:
okay let me know how it works! very interested in doing that =)
Click to expand...
Click to collapse
as far as I know, those commands like under debian should do it:
Code:
su
modprobe xpad
I will test it as soon as possible
Jann F said:
as far as I know, those commands like under debian should do it:
Code:
su
modprobe xpad
I will test it as soon as possible
Click to expand...
Click to collapse
okay thanks =)
ive purchased a female to female usb adapter, would i not need a powered hub to get the controller working?
gotbass said:
okay thanks =)
ive purchased a female to female usb adapter, would i not need a powered hub to get the controller working?
Click to expand...
Click to collapse
I don't know, that depends on the electrical current it needs and reports to the host controller.
If a device is over that curent, the host controller will turn it off.
So if I buy a female-female adapter and plug in a usb stick I should to be to access the content i.e Movies?
Yes, but you need this apk installed on official cm builds.
http://nook.rootshell.ru/hd/USBHostSwitcher.apk
Jann F said:
Yes, but you need this apk installed on official cm builds.
http://nook.rootshell.ru/hd/USBHostSwitcher.apk
Click to expand...
Click to collapse
Hi
I've downloaded this and tried it but my Nook HD+ doesn't seem to do anything different after I have enabled the program and plugged in a usb stick. I'm running a nightly build of CM11 if that makes any difference.
Then your USB stick needs a too high current, try it with an actively powered USB hub.
Check out http://www.zen24223.zen.co.uk/TPUSBUMount6.apk
The instructions are here http://rootzwiki.com/topic/33033-otg-usb-insufficient-available-bus-toolthingy/
plug in your usb device and "press fix insufficient power req" button. works like a charm for my ps3 controller, no usb hub in between the controller and nook required.
Hi, anybody knows if z1 can use external USB via OTG? Thanks
mlhdk said:
Hi, anybody knows if z1 can use external USB via OTG? Thanks
Click to expand...
Click to collapse
It works.
I just tested with a mouse
Thanks
Is there a OTG USB cable in the box or you need to buy one?
mlhdk said:
Thanks
Is there a OTG USB cable in the box or you need to buy one?
Click to expand...
Click to collapse
You need to buy one. but it's cheap anyway
Sent from my Xperia Z1
It does not work on mine. Tried an USB OGT adapter and an adapter cable (both worked on my Xperia S) Tried Dualshock 3 (because of that native support thingy) USB Keyboard and USB Mouse. No reaction. Device is rooted but bootloader is locked and I have stock firmware on it.
xshunin said:
It does not work on mine. Tried an USB OGT adapter and an adapter cable (both worked on my Xperia S) Tried Dualshock 3 (because of that native support thingy) USB Keyboard and USB Mouse. No reaction. Device is rooted but bootloader is locked and I have stock firmware on it.
Click to expand...
Click to collapse
can you check if this cable still work with your Xperia S? I've got my cable that worked with Xperia S and still work fine with z1
mlhdk said:
Hi, anybody knows if z1 can use external USB via OTG? Thanks
Click to expand...
Click to collapse
I tested it with an xbox 360 controller and it worked fine! The battery drain with it is ridiculous though!
I have two different OTG USB cables, with one it works fine with my ps3 controller, no reaction with the other cable. The one which works is a very short one, the not working cable is very long. But I don't thing the length is the reason.
i've got a feeling not all OTG cables work, i bought a generic one from amazon and when i try connecting a usb memory stick it says it has too much devices connected and i need to disconnect one for it to work. Has anyone bought one recently and it has worked, if so please provide a link if possible. thank you
sofir786 said:
i've got a feeling not all OTG cables work, i bought a generic one from amazon and when i try connecting a usb memory stick it says it has too much devices connected and i need to disconnect one for it to work. Has anyone bought one recently and it has worked, if so please provide a link if possible. thank you
Click to expand...
Click to collapse
I bought this one from Amazon (http://www.amazon.co.uk/gp/product/B005FUNQXS/ref=oh_details_o01_s00_i02?ie=UTF8&psc=1)
It arrived yesterday and I plugged the PS3 controller into the phone and it recognised it straight away.
I don''t know if it works with USB Drives or not, I don't have any to test, but it worked fine for what I needed it for, and cheap too.
Thanks mate, I'll give that a go
Sent from my C6903 using XDA Premium 4 mobile app
Just tried the USB OTG clip that i used on my HTC One and it doesn't show up a simple memory card? Which is weird as it's still working on other devices.
Would be good to find out what the problem is, is it a missing pin ? Or just the grade of the kit, plus certain USB OTG cables / clips are working for certain things and not for others, so PS3 will connect but memory won't mount on some, some nothing works on and others everything works, would be an idea to get some clarity on what cables do everything.
I'll test a few more when i get home, just confused as to why this one i've got doesn't work.
Hello .... I'm curious if this tablet can be open up and have the memory removed, only to upgrade it to a higher level, is it possible ? Oh yeah and I know need it to be with one usb end and not a very long cable . Thanks
Dude905 said:
Hello .... I'm curious if this tablet can be open up and have the memory removed, only to upgrade it to a higher level, is it possible ? Thanks
Click to expand...
Click to collapse
It's probably possible, but it wouldn't work.
Take a look:
https://www.youtube.com/watch?v=0nqY2EXTHhE
Do some reading here:
http://forums.webosnation.com/hp-touchpad/331349-2gb-ram-upgrade-touchpad-attempt.html
In my opinion everything is possible with the right "CODE" and that is attached to a human memory with very smart neurons!
From what I saw there I'm assuming that the memory hard drive or card GB is internal to the board ? I want to replace the 32GB with a 64 GB card or whatever these HP tablets have . I don't want to get into un-soldering and soldering though .... Thanks
Dude905 said:
From what I saw there I'm assuming that the memory hard drive or card GB is internal to the board ? I want to replace the 32GB with a 64 GB card or whatever these HP tablets have . I don't want to get into un-soldering and soldering though .... Thanks
Click to expand...
Click to collapse
Everything is integrated. If you want to expand storage you can use an OTG Micro USB HUB an attached a USB 64GB flash drive, it will be bulky but works!
HP_TOUCHPAD said:
Everything is integrated. If you want to expand storage you can use an OTG Micro USB HUB an attached a USB 64GB flash drive, it will be bulky but works!
Click to expand...
Click to collapse
That would work ? that would be great if it can . I would like to place movies onto the usb flash drive and play off it, So you saying it can work ? Thanks
Of course it works, you can play movies directly from the USB flash drive. You will need to supply power to the USB drive, connected by wire or using a Power Bank.
https://www.amazon.com/Adaptor-Powered-Charging-Charger-Connector/dp/B00LTHBCNM/ref=sr_1_9?ie=UTF8&qid=1486006080&sr=8-9&keywords=OTG+micro+usb+hub
If you want to make it portable:
https://www.amazon.com/2600mAh-Portable-External-Battery-Charger/dp/B01N5O3OX3/ref=sr_1_10?
Hello .... I'm curious if this tablet can be open up and have the memory removed, only to upgrade it to a higher level, is it possible ? Oh yeah and I only need it to be with one usb end and not a very long cable . Thanks
Is a Micro USB Port, is the same as your charger. The one that you connect to your Tablet. Search and do some reading on how it works, is very simple but you have to understand how all comes together, there is information on this site also.
Once you have Android install on your tablet, it works the same as others Android or Tablet Devices.
I finally got a OTG Micro USB straight cable, usb on one end and micro on the other, try it out and nothing happens, is there a setting with the tablet that needs to be turn on or off ? thanks
What version of Android are you using? or the type or ROM?
HP_TOUCHPAD said:
What version of Android are you using? or the type or ROM?
Click to expand...
Click to collapse
Its ......Kitkat .... Android 5.1.1 version and cm-11-20161219-NIGHTLY-MLQ-tenderloin .... This is very stable ... Thanks
The ROM that you are using is from the Developer Milaq.
I installed the latest Nightly dated December 26 of 2016, of the ROM you are using.
https://milaq.net/downloads/tenderloin/cm-11.0/
After a fresh installed I connected the OTG Micro USB HUB, then connected the HP Touchpad cord charger to the OTG and finally the USB flash drive ( SanDisk Cruzer Glide 16GB). You will noticed that the USB flash indication light starts flashing and a notification on the Left top side on Android tells you ( USB Storage in USE ). Then you go to the File Manager and you will see USB Storage, when you touch it you will see all the files on the USB flash drive and you can play your movies directly from there at the same speed as if were on the internal storage. When you are done, go to setting and storage and eject the USB Flash drive. Is very simple!
HP_TOUCHPAD said:
The ROM that you are using is from the Developer Milaq.
I installed the latest Nightly dated December 26 of 2016, of the ROM you are using.
https://milaq.net/downloads/tenderloin/cm-11.0/
After a fresh installed I connected the OTG Micro USB HUB, then connected the HP Touchpad cord charger to the OTG and finally the USB flash drive ( SanDisk Cruzer Glide 16GB). You will noticed that the USB flash indication light starts flashing and a notification on the Left top side on Android tells you ( USB Storage in USE ). Then you go to the File Manager and you will see USB Storage, when you touch it you will see all the files on the USB flash drive and you can play your movies directly from there at the same speed as if were on the internal storage. When you are done, go to setting and storage and eject the USB Flash drive. Is very simple!
Click to expand...
Click to collapse
I don't see nothing since nothing happens once I connect it, though if I use the cable to connect to my computer I am able to see the tablet internal drive, but not to a flash drive from tablet to flash . This is why I was asking what's exact cable type for this tablet port . I'm thinking it isn't the correct one . There so many different sizes out there. Thanks for your suggestion, much appreciated
I sent you the link to Amazon of the OTG.
Did you take the time to learn what OTG is?
HP_TOUCHPAD said:
I sent you the link to Amazon of the OTG.
Did you take the time to learn what OTG is?
Click to expand...
Click to collapse
Yes, I did view it but the type that goes into the tablet isn't listed . I bought one already that I assume is the correct size but with these micro usb connectors there is many different types, do you understand what I'm trying to say . Pic below is what I'm using
Code:
https://s23.postimg.org/osksn2wrv/IMG_20170208_141448.jpg
Dude905 said:
Yes, I did view it but the type that goes into the tablet isn't listed . I bought one already that I assume is the correct size but with these micro usb connectors there is many different types, do you understand what I'm trying to say . Pic below is what I'm using
Code:
https://s23.postimg.org/osksn2wrv/IMG_20170208_141448.jpg
Click to expand...
Click to collapse
All the information is on this web site:
https://forum.xda-developers.com/showthread.php?t=1582771
And for the second time this is the OTG cable that I have, which I posted the link : https://www.amazon.com/Adaptor-Powered-Charging-Charger-Connector/dp/B00LTHBCNM/ref=sr_1_31?ie=UTF8&qid=1486568545&sr=8-31&keywords=micro+usb+otg If you look at the specification of how it works it tells you is a "Micro Usb HUB Adaptor with Power Powered"
The HP touchpad or old devices do not offer power to the micro usb port, you need a Y adapter one to supply power to the USB flash drive and the other one for data.
That is why I said, do some research to understand the connection, which it clearly shows on the Amazon product.
Oh ok now I got you it also needs power to make it work, the tablet alone isn't good enough . See, I was hoping just a simple connector going into the tablet Micro and have on the other end usb female connector were by I could plug in a flash stick without power needed . Thanks for all your help
Dude905 said:
Oh ok now I got you it also needs power to make it work, the tablet alone isn't good enough . See, I was hoping just a simple connector going into the tablet Micro and have on the other end usb female connector were by I could plug in a flash stick without power needed . Thanks for all your help
Click to expand...
Click to collapse
That will work with devices that allow power out from the charging port. The work around for old devices is the Y connector, with the connector I posted you can use a USB Keyboard, a USB mouse and a USB flash drive all at once, turning a tablet into a regular desktop PC. Like I posted your ROM will work and you can play movies directly from the USB drive with no loss in performance, with only your basic ROM nothing else is need it.
You are very welcome and have fun!
HP_TOUCHPAD said:
That will work with devices that allow power out from the charging port. The work around for old devices is the Y connector, with the connector I posted you can use a USB Keyboard, a USB mouse and a USB flash drive all at once, turning a tablet into a regular desktop PC. Like I posted your ROM will work and you can play movies directly from the USB drive with no loss in performance, with only your basic ROM nothing else is need it.
You are very welcome and have fun!
Click to expand...
Click to collapse
Yeah, those devises sound really good . I might just get one for that fact alone .... Though, it isn't really what I needed