[Q] Brick Help! - Motorola Droid Bionic

Had a brain fart earlier and started to install a backup over the stock rom. Pulled the battery as soon as I figured out what I did, and now it won't go past the red M. When I try to flash via RSD, it gets stuck on #5, and reads
"Failed Flashing Process. 5/24 oem fb_mode_set -> Phone returned FAIL."
Any ideas? I can't find the files for the one-click recovery, and trying the other threads' suggestions didn't work.

Factory reset and start over
Sent from my DROID BIONIC using Tapatalk 4

bonzai276 said:
Factory reset and start over
Sent from my DROID BIONIC using Tapatalk 4
Click to expand...
Click to collapse
The phone won't go into safestrap, so I'm not sure how to do that
Sent from my Nexus 7 using Tapatalk 4

http://forum.xda-developers.com/showthread.php?p=40489935
Sent from my DROID BIONIC using Tapatalk 4

Related

Deodexed d3 at rootzwikki

http://rootzwiki.com/showthread.php?6078-ROM-Droid-3-Deodexed
Sent from my DROID3 using XDA App
runs great...theres a deodexed bloated and debloated version
Just flashed debloated deodexed... bootloop.... what I do wrong.. can't get into recovery
Sent from my DROID3 using XDA App
Dominicusx said:
Just flashed debloated deodexed... bootloop.... what I do wrong.. can't get into recovery
Sent from my DROID3 using XDA App
Click to expand...
Click to collapse
how long did u wait? bc it takes a while on 1st boot
Dominicusx said:
Just flashed debloated deodexed... bootloop.... what I do wrong.. can't get into recovery
Sent from my DROID3 using XDA App
Click to expand...
Click to collapse
Do you have to clear data and cache before installing? I remember bootlooping old phones because of that.
xconwayx said:
Do you have to clear data and cache before installing? I remember bootlooping old phones because of that.
Click to expand...
Click to collapse
no need to wipe says instructions. i didnt and ive flashed both w/ no problems. also, u need to be on 890 for it to work
Calendar seems to be missing...can anyone confirm this, and how do we get this back?
Waited over an hour. I was on 890.. not sure what I did wrong. Maybe I had a faulty 890? Say it didn't flash 890 and I was on stock, where would that put me? Phone is still bootlooping.. when it first turns on, shows motorola symbol with dual core, is on for a few seconds then flashes back to black, you know like before the boot ani. The pulls up same screen.. any way to get back to stock?
Btw- thank you for responding so quickly.
Sent from my DROID3 using XDA App
Dominicusx said:
Waited over an hour. I was on 890.. not sure what I did wrong. Maybe I had a faulty 890? Say it didn't flash 890 and I was on stock, where would that put me? Phone is still bootlooping.. when it first turns on, shows motorola symbol with dual core, is on for a few seconds then flashes back to black, you know like before the boot ani. The pulls up same screen.. any way to get back to stock?
Sent from my DROID3 using XDA App
Click to expand...
Click to collapse
Are you using hashcodes recovery or koush's?
If you're using hashcodes just restore a nandroid by booting into bp tools.
If you're using koush's then you're probably gonna have to rsd flash the xml. You could probably moto-fastboot just the system partition and be fine
Sent from my DROID3 using XDA App
Trying to get into bp tools. Won't even boot into cwm, does same boot loop.. uhh am I done for?
Btw hashcode sir.
Sent from my DROID3 using XDA App
Dominicusx said:
Trying to get into bp tools. Won't even boot into cwm, does same boot loop.. uhh am I done for?
Btw hashcode sir.
Sent from my DROID3 using XDA App
Click to expand...
Click to collapse
Yeah sounds like your /system is pretty botched up. If you just usd rsd lite and flash the xml/sbf and then re-root then install either recovery(I recommend koush's going forward cause of roms) koush's will restore nandroid backups made on hashcodes recovery.
*if your nandroid is on your internal memory you're gonna have to copy it over to your actually sdcard.
Hopefully you made a nandroid haha
Sent from my DROID3 using XDA App
Thank you, I will give a go. Just getting to my laptop in my boxes. Let you know how it fares.
Sent from my DROID3 using XDA App
stevefxp said:
Calendar seems to be missing...can anyone confirm this, and how do we get this back?
Click to expand...
Click to collapse
im pretty sure i read somewhere that calendar was messing up the deodexing. so thats prob why its missing.
Dominicusx said:
Trying to get into bp tools. Won't even boot into cwm, does same boot loop.. uhh am I done for?
Btw hashcode sir.
Sent from my DROID3 using XDA App
Click to expand...
Click to collapse
so all u can do is boot up to see the bootlogo, no adb, no menu, etc? but no, youre not done for...just use the fastboot recovery files
ultima86 said:
im pretty sure i read somewhere that calendar was messing up the deodexing. so thats prob why its missing.
so all u can do is boot up to see the bootlogo, no adb, no menu, etc? but no, youre not done for...just use the fastboot recovery files
Click to expand...
Click to collapse
Is there a way to add the calendar back in after flashing? I tried running the apks but no love.
Ultima86. I Can get to the menu with recovery, bptools etc.. but when tried to select gives bootscreen bootloop..
Sent from my DROID3 using XDA App
Eris may I ask how to enter the mode to flash sbf
Sent from my DROID3 using XDA App
Dominicusx said:
Eris may I ask how to enter the mode to flash sbf
Sent from my DROID3 using XDA App
Click to expand...
Click to collapse
Power down. Press the 'm' button on the keyboard. While keeping it pressed it, power the phone up. You'll get a menu wiith bptools and ap fastboot, etc. Volume down navigates, volume up selescts. Go to ap fastboot. Then plug your d3 into your computer and let the drivers instal automatically, then click show devices in rsd and it should be there
Sent from my DROID3 using XDA App
stevefxp said:
Is there a way to add the calendar back in after flashing? I tried running the apks but no love.
Click to expand...
Click to collapse
not sure but im guessing itll have to be deodexed as well since youve ran it & it wont install
Thank you eris master! Back to stock! You're tha Man!! Now to root and retry! Ahh made my day, thought my device was done for. I appreciate it
Sent from my DROID3 using XDA App
Dominicusx said:
Just flashed debloated deodexed... bootloop.... what I do wrong.. can't get into recovery
Sent from my DROID3 using XDA App
Click to expand...
Click to collapse
has to be on the lastest ota build

Help frozen bionic

I was using pathsaver to upgrade my phone to 902 from eclipse 2.0 but it finished it just stays at the Motorola boot up screen any ideas? I would appreciate any help.
Sent from my SGH-I777 using xda premium
lakid06 said:
I was using pathsaver to upgrade my phone to 902 from eclipse 2.0 but it finished it just stays at the Motorola boot up screen any ideas? I would appreciate any help.
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
You're gonna have to find the .902 FXZ file and flash it with RSDlite with AP Fastboot mode.

[Q] [T-Mo] Cannot flash recovery

After unlocking my bootloader, I am trying to flash CWM recovery. However after flashing CWM recovery, while in fastboot mode, when I select the recovery option in fastboot mode it just restarts the device.
Has anyone else seen this problem? Could there be something I am doing wrong that is causing this to occur?
Are you using vol up to select or pwr? I think when selecting recovery the select button Is vol up instead of pwr.
Sent from my XT1055 using xda app-developers app
n82k said:
Are you using vol up to select or pwr? I think when selecting recovery the select button Is vol up instead of pwr.
Sent from my XT1055 using xda app-developers app
Click to expand...
Click to collapse
I clearly can't read, thank you for pointing this out. It is now working properly.
Bootloaders are clearly confusing and scary places to spend time on your phone...they demand your full attention and the more you read and understand before you get in there the better.
Glad you figured it out!
What method was used for unlocking the bootloader?
Sent from my SCH-I605 using Xparent Cyan Tapatalk 2
Bill Idol said:
What method was used for unlocking the bootloader?
Sent from my SCH-I605 using Xparent Cyan Tapatalk 2
Click to expand...
Click to collapse
Likely here:
https://motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-a
TooSlo said:
Likely here:
https://motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-a
Click to expand...
Click to collapse
Thankyou boss. So after unlocking what method is everyone using to root?
Sent from my SCH-I605 using Xparent Cyan Tapatalk 2
Bill Idol said:
Thankyou boss. So after unlocking what method is everyone using to root?
Sent from my SCH-I605 using Xparent Cyan Tapatalk 2
Click to expand...
Click to collapse
Flash a custom recovery through fastboot, then you can easily install SU through one of the many flashable packages.
I think the CWM installer even has the option to root the first time you boot to it. I had the SuperSU.zip lying around, so I just threw that on my internal card in case it's ever needed again. Originally my unlock code wasn't in Motorolas database, so it took a bit of talking with CS to finally get my unlock code. It sounds like they've uploaded all of the device_ids since then though, so you should be good to go.
TooSlo said:
Flash a custom recovery through fastboot, then you can easily install SU through one of the many flashable packages.
I think the CWM installer even has the option to root the first time you boot to it. I had the SuperSU.zip lying around, so I just threw that on my internal card in case it's ever needed again. Originally my unlock code wasn't in Motorolas database, so it took a bit of talking with CS to finally get my unlock code. It sounds like they've uploaded all of the device_ids since then though, so you should be good to go.
Click to expand...
Click to collapse
I like TWRP myself, couldn't I flash TWRP through Goo Manager. But CWM has ability to root, wow that's interesting. Btw, where do you get the SuperSU.zip from?
Sent from my SCH-I605 using Xparent Cyan Tapatalk 2
To root after. Just flash cwm, boot into recovery and then select reboot. This then gives you the option to delete recovery file and also root
Sent from my Nexus 7 using XDA Premium 4 mobile app
GR36 said:
To root after. Just flash cwm, boot into recovery and then select reboot. This then gives you the option to delete recovery file and also root
Sent from my Nexus 7 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I just rooted my phone with jcase PwnMyMoto, can just flash CWM now or even TWRP?
Sent from my XT1060 using Xparent Cyan Tapatalk 2
Bill Idol said:
I just rooted my phone with jcase PwnMyMoto, can just flash CWM now or even TWRP?
Sent from my XT1060 using Xparent Cyan Tapatalk 2
Click to expand...
Click to collapse
Nevermind got the answer to that one.
Sent from my XT1060 using Xparent Cyan Tapatalk 2

Factory Reset after root? [VZW NON-DE]

Rooted the device, trying to reset it and it just keeps rebooting. Is there a recovery installed still that I can use to do it? Will flashing the 4.4 recovery break root?
Sent from my Nexus 7 using XDA Premium 4 mobile app
Rebel908 said:
Rooted the device, trying to reset it and it just keeps rebooting. Is there a recovery installed still that I can use to do it? Will flashing the 4.4 recovery break root?
Sent from my Nexus 7 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Slapmymoto? Fastboot erase userdata I believe
Sent on my Moto X

Rom Flashing Issue - System Partition Read Only

Hello. I had an issue in TWRP when I tried to flash a rom I got the error that system was set to read only. Recovery allowed me to wipe system. I tried a few times and decided to restore my nandroid. I got the same error. I panicked, tried 4 more times, and it finally restored. I know the rom I was good (Resurrection,) as I checked the MD5. I also have flashed supersu and xposed. I am on the stock rom now. When I searched for a root cause, I only found it for other phones. Any ideas? Thanks.
Sent from my XT1254 using Tapatalk
When you first installed twrp did it ask you to allow read/write to system?
Sent from my XT1254 using Tapatalk
I don't believe so, but I am assuming I would have selected the correct option as I was able to flash super user. Thanks for the reply though!
Sent from my XT1254 using Tapatalk
Use TWRP Manager to refresh the recovery, and try again
Sent from my DROID Turbo via Tapatalk. Now with that cyanogenmod goodness.
meskes said:
Use TWRP Manager to refresh the recovery, and try again
Sent from my DROID Turbo via Tapatalk. Now with that cyanogenmod goodness.
Click to expand...
Click to collapse
I hadn't thought of that. Will do!
Sent from my XT1254 using Tapatalk
zeyrah said:
I hadn't thought of that. Will do!
Sent from my XT1254 using Tapatalk
Click to expand...
Click to collapse
So TWRP app said it could not flash due to error or already having the current recovery. I'll try flashify.
Sent from my XT1254 using Tapatalk
zeyrah said:
So TWRP app said it could not flash due to error or already having the current recovery. I'll try flashify.
Sent from my XT1254 using Tapatalk
Click to expand...
Click to collapse
Reflashed and tried a different rom. Same issue. Thoughts on cm recovery?
Sent from my XT1254 using Tapatalk
Did you flash the correct version of TWRP via fastboot?
http://forum.xda-developers.com/mot...recovery-twrp-2-8-7-0-touch-recovery-t3180308
It will ask you to allow system write when you boot into it the first time.
Sent from my XT1254 using Tapatalk
SpyderPride said:
Did you flash the correct version of TWRP via fastboot?
http://forum.xda-developers.com/mot...recovery-twrp-2-8-7-0-touch-recovery-t3180308
It will ask you to allow system write when you boot into it the first time.
Sent from my XT1254 using Tapatalk
Click to expand...
Click to collapse
I did. I reset defaults and it asked me again. I am at a loss. While I am no developer, (you all are amazing, ) I have rooted every device I have had. I am at a loss. You are all amazing at what they u do.
Sent from my XT1254 using Tapatalk
zeyrah said:
I did. I reset defaults and it asked me again. I am at a loss. While I am no developer, (you all are amazing, ) I have rooted every device I have had. I am at a loss. You are all amazing at what they u do.
Sent from my XT1254 using Tapatalk
Click to expand...
Click to collapse
I am certainly not a developer either, I just like tweaking my phone and I try to be super careful about following directions when it comes to things like modifying boot, recovery, system and so forth.
I wonder if flashing the proper stock recovery, then flashing TWRP again would work? Please get feedback on this as I am not sure if it is safe. Also maybe check the md5 on the TWRP download.
Sent from my XT1254 using Tapatalk
Still failed.... Bummer...
Sent from my XT1254 using Tapatalk
zeyrah said:
Still failed.... Bummer...
Sent from my XT1254 using Tapatalk
Click to expand...
Click to collapse
You are seeing the slider bar at the bottom of the screen when TWRP asks to allow system write, correct?
Sent from my XT1254 using Tapatalk
SpyderPride said:
You are seeing the slider bar at the bottom of the screen when TWRP asks to allow system write, correct?
Sent from my XT1254 using Tapatalk
Click to expand...
Click to collapse
Right
Sent from my XT1254 using Tapatalk
Here is the error I am getting in recovery. "You have an installed system that isn't signed with this build's key, aborting...
run_program: child exited with status 124
script aborted: Can't install this package on top of incompatible data. Please try another package or run a factory reset
Can't install this package on top of incompatible data. Please try another package or run a factory reset
I:Legacy property environment disabled.
E:Error executing updater binary in zip '/sdcard/Download/cm-12.1-20160106-NIGHTLY-quark.zip'
Error flashing zip '/sdcard/Download/cm-12.1-20160106-NIGHTLY-quark.zip'" Thoughts?
Sent from my XT1254 using Tapatalk
zeyrah said:
Here is the error I am getting in recovery. "You have an installed system that isn't signed with this build's key, aborting...
run_program: child exited with status 124
script aborted: Can't install this package on top of incompatible data. Please try another package or run a factory reset
Can't install this package on top of incompatible data. Please try another package or run a factory reset
I:Legacy property environment disabled.
E:Error executing updater binary in zip '/sdcard/Download/cm-12.1-20160106-NIGHTLY-quark.zip'
Error flashing zip '/sdcard/Download/cm-12.1-20160106-NIGHTLY-quark.zip'" Thoughts?
Sent from my XT1254 using Tapatalk
Click to expand...
Click to collapse
Did u modify the rom before flash?
I was a moron and was not wiping /data as I thought it would wipe internal storage. Sorry all!
Sent from my XT1254 using Tapatalk
zeyrah said:
I was a moron and was not wiping /data as I thought it would wipe internal storage. Sorry all!
Sent from my XT1254 using Tapatalk
Click to expand...
Click to collapse
Glad you got it and learned something. We all make mistakes!
Sent from my XT1254 using Tapatalk

Categories

Resources